GoogleReader feed problems with AtomTask

I'm trying to access a RSS feed via the Google Reader API http://code.google.com/p/pyrfeed/wiki/GoogleReaderAPI
The feed that Google returns is supposed to always be an Atom feed. And as far as I can see, apart from some extra attributes, all the tags are at the right place.
But when I try to use an AtomTask to read the feed items for this, nothing happens.
The OnStart function is started but after that nothing is happening. It doesn't look like FX can identify when the feed or entries in the feed start.
But it doesn't generate any errors either.
Anyone who has any input?
I could treat it as just an XML and parse it by myself, which is probably what I will do unless someone has any ideas on how to solve this.

Perhaps the article [Adding feeds to SpeedReaderFX that don't *quite* comply with the RSS/Atom formats|http://learnjavafx.typepad.com/weblog/2009/09/adding-feeds-to-speedreaderfx-that-dont-quite-comply-with-the-rssatom-formats.html] (and the one it refers to) might help you.

Similar Messages

Feed problems with iTunes

Hi everyone,
This is my first post. I have a podcast that I submitted to iTunes yesterday. I got a confirmation from them this afternoon saying it had been accepted, and it appeard on the store fine. I subscribed to it and episode was playing perfectly.
Then out of nowhere I get an e-mail saying it has been blocked due to technical problems with the feed.
It tells me to fix the feed and re-submit to iTunes. I have run my feed through Feed Validator and it says it is valid, but could do with sorting a few things.
The problem is, I'm a relative newbie, and I REALLY struggle with this XML stuff and how to fix it. It's like another language to me.
The feed is
http://feeds.feedburner.com/soundmacleod
A few problems come up, despite it being valid, and I would really like to make it so that iTunes don't reject it again.
Can ANYONE here run the feed through feed validator and explain in simple english what I need to do to my feed to make it 'clean'?
I'd really appreciate some help with this. I just want my podcast to be available in iTunes!!!
Thanks

As you say, the podcast appears on the Store page but shows no image or episodes. Subscribing works correctly.
I can't offer any easy explanation for this. Part of the difficulty may be Feedburner's peculiar way of going about things. The feed URL you give works for subscribing, but if entered into a browser produces a web page drawn from the feed. This page gives the actual feed URL as
http://feeds2.feedburner.com/watchwithmothers/podcast?format=xml
And it may be that while subscribing (which takes place in the iTunes application, not the Store) can parse the shorter version to reach the XML, the Store can't. This may be difficult to deal with, since if you try to submit the URL above you will be told that the podcast already exists.
I can only suggest you approach iTunes Support:
http://www.apple.com/support/itunes/store/podcast/
though I have to tell you that they are liable to give you a stock answer which won't address the problem. You might get better results by asking Feedburner.

Photosmart 7850 and feeding problem with label paper

I am using Avery Ink Jet labels #8162 and my document is set to that. I do not always have this problem....just sometimes. The label paper seams to not feed in far enough and the labels do not print in the correct place on the page. But if I print the same document on a piece of plain paper....the labels print in the correct place. I have tried cleaning the rollers...sometimes this works. I have in the past also downloaded current drivers. Does anybody have any other suggestions?
Thank you,
Patrice

No I have not. I have had this problem for over a year. Sometimes my label paper works and sometimes it doesn't. Just the other day 2 pages printed correctly and the 3rd did not. I was really hoping someone on here had the answer.

Paper feed problem with OfficeJet CL7680

The paper feed roller does not drop to pickup the paper and then I get a load paper message. I have tried resetting the default by unplugging and holding down the OK and cancel button as I turn on the machine but the problem persists. I took the machine into my local copy machine repairman who has worked on HP printers before and his analysis was the same as mine. He basically said this is a "throw away" machine, go out a buy a new one. Other than the paper feed roller not dropping down, the machine works perfectly and I would rather repair if if possible that spend the money for a new one that I have no confidence in.

Call Epson tech support as you are still under warranty w/them.

RSS Feed Problem with RDF files

Hi everyone,
I created a RSS feed like it is described in this weblog: Implementing A RSS Feed Reader In The Portal
Some RSS URLs work perfectly some don't work.
An example are RSS feeds like http://www.heise.de/newsticker/heise.rdf
Are .rdf files different from other RSS feeds?
How can I reference them from the portal?
Thanks,
Olaf

HI Keith,
Go to ~/LIbrary/Preferences and move the com.apple.Safari.RSS.plist file to the Trash then relaunch Safari.
See if that makes a difference. If not, from the Safari Menu Bar click Safari/Empty Cache. Relaunch Safari.
Carolyn

I have read up, and am still having problems with RSS Feed

Greetings Everyone.
I really need some help with my RSS feed before I go insane. I would like to think I know what I am doing, but obviously there is some little (or big!) step I am overlooking.
Ok here is my site: www.drewernst.com it is hosted by asmallorange.com
My pocast is at www.drewenst.com/podcast
This is the rss feed iWeb generated: feed://www.drewernst.com/podcast/The%20Jeff%20and%20Drew%20Podcast/rss.xml
Now, from everything I have read so far - it seems that as long as you get the URL right when you are publishing to a folder, iWeb should do the rest. Also, it is important to put the whole folder containing your podcast in your root web folder otherwise it breaks the feed. Both of these things I have done. (obviously not correctly, or it would be working!)
I read Many tutorials and topics I could find about this, but it still doesn't seem to work for me. Apple suggests taking the RSS feed an pasting it into itunes under Advanced menu "subscribe to podcast" to make sure your feed is valid before submitting to itunes.
When I do this, I get an message saying "there was a problem downloading... An unknown error occurred (-50).
I tried using a feed validator and it came back with so many errors. I just don't know that much about RSS, but i have been working on this for about a month and it's driving me crazy. No one I have asked at the apple store has been any more helpful than to suggest I just buy a .mac account and do it from there(honestly the nerve. wink.) I don't need .mac, I have my own website.
Thanks in advance.
Mr. Rss Crazy,
Drew
Oh, I tried to be as detailed as possible but if I left anything important out, please just ask...I will be watching this like a hawk.
iMac 2.0ghz Core 2 Duo Mac OS X (10.4.8)

So, my web-host said that it's a problem with the RSS feed, not there hosting.
They pointed me to "Feed Validator" which I looked at before. I have a lot of errors.
http://feedvalidator.org/check.cgi?url=http%3A%2F%2Fwww.drewernst.com%2Fpodcast% 2FThe%2520Jeff%2520and%2520Drew%2520Podcast%2Frss.xml
Shouldn't Garageband and iWeb have taken care of these errors. I don't even know how I would correct them. I thought this was supposed to be a 1-2-3 process, like the documentation of both programs said.
Sorry if I sound sarcastic, I am just frustrated.
iMac 2.0ghz Core 2 Duo Mac OS X (10.4.8)

Problem with RSS feeds in AppleMail

If anyone can help, I would greatly appreciate it. I have several RSS feeds that come in through AppleMail. Every so often, it stops receiving all of the feeds (I get an explanation point next to the the RSS header). After a day or so, it will start receiving feeds again. I have no problem getting e-mails... just my RSS feeds. Does anyone have any ideas?
Thanks!

I have just experienced the same problem with RSS feeds through AppleMail. A couple of days ago (just after I had upgraded to Aperture 3 - not sure if that's relevant) the exclamation mark appeared next to all the Mailboxes for my RSS feeds, and has not disappeared. If I click on the exclamation mark I get the message "there was an error updating the RSS feed 'Apple Hot News'. The RSS feed is temporarily unavailable because an internal error occurred".
I have tried shutting down, and deleting the RSS plist - with no effect.
Other details - the problem exists on a MacBook Pro, running Sno (v 10.6.2 - all updates applied) and Apple Mail v4.2. I can send / receive regular email. I also have an iMac (also running Sno 10.6.2 and Apple Mail v4.2) - RSS feeds work fine on this machine. Both machines use the same wireless broadband router.
Grateful for any help. Thanks

I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted??

I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted? Maybe Itunes thought that I was someone trying to copy my old podcast because I kept the same name, I tried to change the names but it looks like I'm on a blocked list...

There is a procedure for changing the feed URL for a podcast, which it seems you haven't followed: you have to add a special tag to the old feed - just submitting a new feed will have exactly the effect you describe. The proper method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move

What is the problem with my feed ?

Can anybody shows me where is the problem with this feed :
<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" version="2.0">
<channel>
<title>F Communications Podcast</title>
<link>http://www.fcom.fr/</link>
<language>fr-fr</language>
<itunes:subtitle>Electronic With No Limit</itunes:subtitle>
<itunes:author>F Communications</itunes:author>
<itunes:category text="Music"></itunes:category>
<item>
<title>F Com Podcast #1</title>
<itunes:author>Laurent Garnier</itunes:author>
<itunes:subtitle>Essential Mix - November 1995</itunes:subtitle>
<itunes:summary>
01. Felix Da Housecat - Submarine - Radikal Fear
02. LA Williams - Terminal Velocity - DJax
03. ???? - ???? - ????
04. Woody MacBride - Units - Head In The Clouds
05. Laurent Garnier - Rochando O Bico - F Com
06. Steve Stoll - Universal - Proper
07. Scan X - Blue - F Com
08. Electronic Exp - Meltdown Ride - Transparent Sound
09. Reload - Birth Of A Disco Dancer - Warp
</itunes:summary>
<enclosure url="http://younderboy.free.fr/fcom/essentialmix.mp3" type="audio/mpeg" />
<itunes:duration>XX:XX</itunes:duration>
<pubDate>Thu, 16 Nov 2006 19:07:00 GMT</pubDate>
</item>
</channel>
</rss>
When I enter its URL in iTunes, it doesn't reject my feed, but nothing happens. I can see the URL instead of my Podcast's title, like on this caption : http://younderboy.free.fr/caption.jpg
Help me please, I don't understand where is the problem ! Thanks a lot...

Go to this site - http://feedvalidator.org/
And give it your feed URL.

Problem with HP Printer - has stopped printing for no apparent reason!

Hi all,
I have a Powerbook G4 and an HP Deskjet 3820 printer that have got along just fine ever since I first got the laptop - in fact, until just a few days ago it was printing normally with no trouble at all. Now, however, it stubbornly refuses to print anything (from Word, Preview, Firefox - so I'm guessing it's an OS problem...)
The fault is as follows: I turn on the printer and it feeds a single page through without printing anything on it, despite having no instructions to do so. Whilst doing so all of the printer's lights flash in sequence. When it's idle the green status light next to the power button is on, with no other lights on. When I ask it to print something the print dialog comes up and the job is transferred into the print queue. The job loads but instead of printing, it moves straight from the print queue into the 'completed jobs' screen. Whilst it's doing this the power light on the printer flashes.
If I try to do a test print I get the message "unable to print: error 1000".
I've checked the leads and changed the printer's ink cartridges. I reset the printer in the printer utility box, then deleted and reinstalled the printer in the printer utility box. I've repaired the disk permissions (having deleted the printer, and then restarted before I tried to reinstall the printer), and finally I've installed the HPJIS drivers and the associated bits that come with them. I've even tried to use a different USB port, all with no effect.
The only thing that I've installed on this computer recently that I thought might be having an effect is the Citrix ICA remote desktop client - but I've deleted that and repaired permissions afterward, so I don't see how it could still be having an effect.
I'm basically now totally stumped. Any suggestions? I'm pretty keen to get this sorted out ASAP as I'm a student and need the printer to print off work and exams. Plus it's driving me up the wall. Any help would be greatly appreciated.
Thanks
Chris

Mr or Ms Light,
No, I don't think it's an OS problem. Printing on the Mac is nightmarishly complicated (under the hood), and HP installs its own system that bypasses the default FreeBSD system. This is an occasional problem with my HP 5550. HP claims to have good user support.
I've had, regularly, the exact symptoms. I've a migraine now, so I can't remember what I do about it. But it would be typical of me to press the printer button off, then clear the queue, then turn on the printer and have it remove the paper still in it. If needed, I might restart the computer.
As for the cause, for the last 10 minutes I've been asking my 4-year old granddaughter, but she's not in the mood to tell me. However, she often prints pictures of Elmo off the internet to color, and she captures parts of screens and prints them. This is with the USB cable disconnected; and its when I reconnect it, the exact symptoms you describe occur.
Try the above, and I may be able to give you a definitive answer later, after my granddaughter's nap.
Bruce

Genius needs to help! problems with my video card and system

Hey guys! I'm going to post my specs first so that you get a good idea of what I'm running on:
MSI Neo2 LS 865PE.....MAT=Slow
Pentium4 2.4C.....FSB=233=2.8C hyperthreading enabled ~>1.55V
Corsair TwinX 1gig PC3700.....memory on "AUTO" in BIOS with timings at 3,4,4,8 ~> 2.7V
Radeon 9700NP.....stock speeds ~>1.7V
AlienX case with 2 fan400 watt power supply and 6 case fans
Zalman Alum/Copper heatsink fan
1:I've had this motherboard for a few months now. I upgraded my video card from a nVidia Ti4200(128meg) to a Radeon 9800 a month ago, but I couldn't get it working at 8X AGP, no matter what voltages I threw at it. I returned it for a Radeon 9700NP hoping that it would work, but it still won't.
I'm using BIOS 1.9 and since there is no option to select your AGP speed, I could only try using ATI's drivers. Once booted into Windows, there is a slider you can move to select you AGP speed. On my machine It says that It has performed some tests and has concluded that AGP 4x is the best for my system....but my system supports AGP 8X!
I've moved the slider over to 8x (which requires a reboot) at least 5 times with each card but the slider refuses to move past 4xAGP after the reboot.
2: My second problem: I had an old stick of KingMax PC3200 and decided to buy 3 more sticks. Unfortunatly, the 3 I bought did not match the one I had, so I only put 2 of the new sticks I bought into my system. Immediatly, My system would crash, lock up, files were corrupt, and I got PLENTY of blue screens of death with a long message containing: 0x0000007 with all these other numbers and "0"s. I did a search online and found out I had a hardware incompatibility problem. I never got this with my old stick of ram.
I returned the 3 sticks of Ram and replaced them with the Corsair. Put my new Radeon 9700 in, formatted my hard drive....and within 24 hours, my system locked up 3 times, rebooted itself 5 times, and gave me the same BSOD as mentioned above with the same long message.
I didn't change anything except for the memory and the video card. I've been wanting to overclock, (thats why i bought the faster memory ) but I'm not sure what to do at this point.
I have my FSB at 233 but I'm scared to go any higher because of previous system instability at stock speeds. My RAM was running on 400 and MAT=Turbo with the most relaxed timings at 3,4,4,8.
I've given myself hours of sleepless nights formatting when my system wouldnt boot into windows; overclocking....etc. I NEED HELP. PLEASE. PLEASE. Anything could work at this point.
I'm trying to get more info on how to run my system at a 5:4 ratio, also.
If anyone has problems like me or knows what could be the problem with my system, please reply to this post, it would help me a lot. I've been trying to fix these problems for a few months now so anything is greatly appreciated.

Thanks a lot to you guys that responded. I brought my computer home this past holiday and I want to let you know where I stand as of now. I guess this thread is like my blog for my computer. I want to clear some things before my first post makes everyone confused.
1- I have only 2 sticks of memory in my system: the Corsair PC3700 TwinX 512x2
I returned the 3 KingMax I bought, and still keep my old stick just in case.
2- I am using the 400 watt power supply that came with the case. I read some reviews of the case and I know the reviewer did not have problems with the power supply. In my BIOS, there are some voltages it is weak on. Lets say: it it should be 5.00+, my power supply will be feeding it 4.96v or something like that, but I dont know, or think, that is a major problem...
3- My computer will refuse to boot if memory speeds are set at anything below 400. SO....if I want to use a 5:4 ratio and have to set my memory speeds to "333" in BIOS, my system refuses to boot.
4- This morning, I did manage to overclock my FSB to 250. Specs are as follow:
Memory Timing @3,4,4,8,4.....speed set at "AUTO".....MAT at "SLOW"
MY 2.4C's FSB was raised to 250 = 3.0gig
AGP/PCI frequency: 67.xx/3x.xx (cant go any lower)
CPU voltage: 1.5500
Memory voltage: 2.75
Video Card voltage: 1.7
Everything was fine for the whole day until I heard something click in my computer around midnight, and then seconds later, my computer froze and made a continuous beeeeeeeeeeeeeeeeeep. (you can imagine)
This "click" and system crash has been plaguing me for months now. I dont know whay it happens. I was just using AIM when I heard the click and my heart stopped.
My memory speeds have been set to "AUTO" even at the FSB of 250. But I don't know if this still means my system is at a 1:1 ratio. I know the BIOS then adjusts the memory to work at 500 if my FSB is 250...so I assume it is? I love 3gig, but somehow I feel that 2.8 is faster, since the FSB=233 running parallel to my memory, also at 233
A FSB of 250 is good enough for me, that's what I've been waiting 6 months for. If anyone knows how to set other ratios to achieve a FSB of 250+, please let me know, but as I said, my memory won't boot if its set at "333"

Problem with C4 and C5 On-Demand

We've been using the YouView box for about three weeks, but have had some disappointing results. On the positive side, picture quality is very good through HDMI and the pause live TV and recording all work fine.
The main problem is with On-demand, mainly C4/C5 and related channels. Generally BBC i-player works OK though it has occasionally failed. Navigation through the EPG to select a past programme is excellent on YouView, but we have never succeeded in seeing any C4 or C5 programme. Bizarrely, the Ads always play OK, but as soon as the main programme starts, the picture breaks up with severe pixcilation, crackling sound which sometimes disappears altogether and then the picture freezes and the whole thing hangs up. Useless.
Looks like a streaming problem with inadequate throughput. We have BT Infinity, and I did a speed test using a laptop at the end of the cable feeding the YouView box. With i-player speedtest got 10 and 20 Mb/s and other speedtest sites gave a minimum of 5 Mb/s even at the busiest internet time in the early evening. The YouView box is not directly connected to the BT Hub, but comes through a 100 Mb/s Netgear Ethernet switch. When we've had problems, nothing else has been active on the network. I don't believe the problem is anything to do with the local setup. It seems to be something to do with the BT server or where ever the C4/C5 streaming is coming from.
Our TV is a Sony Bravia which does Internet TV. The BBC i-player is faultless even on HD setting except occasionally at the busiest time but always runs at SD. Five on Demand also runs perfectly.
We signed up for BT YouView mainly because we wanted STV and C4 on demand which the Sony service doesn't provide. Sadly the BT service has failed to provide exactly the thing we wanted.
I noted another forum thread commented that the box hangs up. I've had that too, and of course if you are watching live TV through it then the picture disappears because the box is taking the digital signal and processing it so you can pause live TV. The only way to recover, it seems, if this happens is to switch the box off with the back panel switch and reboot.
Am I alone with the C4/C5 problem or is there a solution?
Solved!
Go to Solution.

Just following-up on this posting from a week or two ago and another a few days later about the problems with catch-up TV. We were disappointed with the lack of service, but as we can get most of the catch-up we want on the Sony Bravia TV, hadn't pursued it with BT perhaps hoping things would improve.
Got a phone call last week from BT asking if we'd been able to set up the YouView Box OK, which we had. Mentioned the unsatisfactory service. She immediately put me through to the BT technical call centre in India where I spoke to guy called Rajiv or something like that. Asked a few questions and then asked me to switch off the YouView Box (back panel switch) and do a hard-reset on the Homehub Router. Once this had been done, and the YouView box switched back on. The service ran fine and has done so since. I don't know if Rajiv did anything in the network or whether this is just some problem (he called it a "glitch") in the router/YouView box. Funny that that the speedtest and streaming to the Sony TV works OK.
He phoned back a couple of days later to see if we'd had any further problems. Overall good service. It would be interesting to know from a technical point of view what the problem was and how it was solved. It shouldn't be necessary to reset boxes in this way.

Problem with Request for Permissions (mobile app)

In my application I want to publish the results of the games on facebook. I used this tutorial: http://www.adobe.com/devnet/facebook/articles/flex_fbgraph_pt1.html
Here is a fragment of my source code:
<fx:Script>
        <![CDATA[
            import com.facebook.graph.FacebookMobile;
            import mx.events.Request;
            import valueObjects.GlobalVariables;
            protected var extendedPermissions:Array = ["publish_stream","user_website","user_status","user_about_me"];
           protected function initApp():void
                FacebookMobile.init("app ID",loginHandler);
            protected function loginHandler(success:Object,fail:Object):void
                if(success){
                    currentState="loggedin";
                    nameLbl.text=success.user.name;
                    userImg.source=FacebookMobile.getImageUrl(success.uid,"small");
                    birthdayLbl.text=success.user.birthday;
                    FacebookMobile.api("/me/statuses",getStatusHandler);
                else{
                    this.login();
            protected function login():void
                FacebookMobile.login(loginHandler, stage, []);
            protected function logout():void
                FacebookMobile.logout();
                currentState="loggedout";
            protected function getStatusHandler(result:Object, fail:Object):void
                statusLbl.text=result[0].message;
            protected function submitPost():void
                FacebookMobile.api("/me/feed",submitPostHandler,{message:GlobalVariables.d.toString()}, "POST");
            protected function submitPostHandler(result:Object,fail:Object):void
                FacebookMobile.api("/me/statuses",getStatusHandler);
        ]]>
    </fx:Script>
I have problem with permissions. After login I see a white screen instead of request for permission. The desktop application does not have a problem with it. When I log for the first time to the desktop application and I will give the permissions applications, then in the mobile application everything works fine. But this is not a good solution. And so please help.

The labelField of IconItemRenderer only supports single line text. Try using the messageField instead:
<s:List width="200" height="200">
    <s:dataProvider>
        <s:ArrayList>
            <s:DataItem desc="1 Hello World Hello World Hello World" />
            <s:DataItem desc="2 Hello World Hello World Hello World" />
            <s:DataItem desc="3 Hello World Hello World Hello World" />
        </s:ArrayList>
    </s:dataProvider>
    <s:itemRenderer>
        <fx:Component>
            <s:IconItemRenderer labelField="" messageField="desc">
            </s:IconItemRenderer>
        </fx:Component>
    </s:itemRenderer>
</s:List>
If you need more control you might need to subclass, this post might help: http://flexponential.com/2011/08/21/adding-multiline-text-support-to-labelitemrenderer/

I am having so many problems with compatibilty with my AEBS....

Ok here's my setup - i've got cable modem running straight into my brand spanky new AEBS. I have a USB printer running into the back of this. I have a MacBookPro 2.33 Ghz Intel Core Duo. I connect to the internet using this with Wireless. I have set up the BS with 802.11n (b/g compatible), automatic channel, and WEP (Transitional S N). I have set up my Mac with Manual IP so that I can port map and open up a Torrent client and a KDX Server on my Laptop which works perfectly so no problems there.
I have the following problems with my other kit that needs to connect to the Internet:
A) My wife has a little PC Laptop that runs XP Pro and she needs Internet access. I've set it up to see the Extreme, using a Manual IP and WEP Password - which turns into TKIS or something - I don't really understand PC's. I have also taken the firewall off, and the PC is connected to the Access Point, and all seems well but the PC just will not see the internet. Everything SEEMS to be working up to the point of needing the internet. The PC used to work on my old NetGear router that I had before I 'upgraded' my router to AEBS. Very strange and utterly frustrating.
B) I have a GamePoint wireless acces point downstairs that picks up the wireless network and feeds it to the XBOX 360 through Ethernet. This used to work a treat using my netgear router. The problem I have now is that when i enter a WEP password on the BS, it asks for 13 characters, and the WEP password box on the browser interface is split into 5 boxes that allow 2 digits each. It does not support WPA security so - ***? How can I run this system with WEP?
C) I have a similar problem with my Wii in that it only accepts 10 digits for WEP.
I am very frustrated - this Apple Base Station only seems to want to work with other Apple gear.
Can anyone help me with any or all of these frustrating problems?
Thanks in Advance - Darren

Ok PC sorted.
A reservation says - I want this PC to be always given this IP address.
To reserve an IP from the DHCP panel.
(in your list of images)
Enter the Mac number of the PC - alongside the IP number you want to give it.
The Mac number is also called the Hardware Address. Network Utility will give you the number. Be careful, you need the Hardware Address of the Wireless connction - not the Ethernet connection which will appear first.
(Select en0 en1 etc. )
OK - I have a solution for your games too. But you are not going to like it.
Your gaming devices only support old-fashioned 40-bit WEP. Which is easy to crack.
Your AEBSn supports that too - but it is incompatible with 802.11n.
This is what you can do (if you want)
Click the Airport Icon (in Airport Utility) and go the Wireless tab.
You'll see a pulldown marked Radio Mode. If you click it you see 4 options.
But if you OPTION click. You see 8 options. Select 802.11b/g compatible.
Now if you click the Wireless Security pulldown - you'll get the option of 40-bit WEP.
This will give you a Hex String which will fit into your gaming devices.
But of course, you have sacrificed 802.11n to get it.
Another option is to dig out an old 802.11g wireless box and make a dual-band network.
I think we are done!!!

Print quality problem with Officejet Pro K5400

I purchased the above printer on August 8th of this year and I have really liked it until now. The print quality has gone to ----! I have done a chat with a technician, replaced any of the cartridges that might be low and it is worse than ever. Two thirds of the page will print okay and then the last third is either blank or very poor quality. I have tried changing the print quality from draft to best and it doesn't help. What recourse do I have? I can't find a real person to talk to.
Does anyone out there have an answer?

I purchased my Pro K5400 in May 2008. In the beginning it was loud (still is) but the printing was beautiful. Over the last three months the color printing is really bad. I've replaced the cartridges with only HP ink, I've aligned printheads, I've cleaned printheads, I've calibrated the linefeed. The diagnostic suggests I replace the printheads. Really? After less than a year? It also sporadically feeds several pages at once. And, I do a lot of printing of claim forms, it arbitrarily expands the left margin. Oh, it also jams often. Again, I believe these last two are due to a feeding problem. I sent an online question and got answers back in somewhat broken English that seem hooked on just replacing the ink and cleaning the printheads. Also, they gave me directions on how to clear a jam. This I know as I clear jams all the time in this printer. They are unable (perhaps due to language barrier) to answer the feeding/jamming problems. I really see this as just a very bad quality printer. I've owned other HPs and never had problems like this. What is the best way to contact someone in the United States about this printer?

GoogleReader feed problems with AtomTask

Similar Messages

Maybe you are looking for