Got a feature idea? Post your idea or vote on an idea at the ideas site
We have just launched a new site (
http://ideas.acrobat.com) so
that we can hear new ideas and have the community vote on which
ideas are important. Post your idea or vote on an idea. We hope
you’ll check it out.
Thanks,
The Acrobat.com Team
Buzzword is a part of Acrobat.com
The installing groups is actually already implemented in the beta of 2.6, which is in ftp.archlinux.org/other/pacman
From the ChangeLog itself:
Added group handling, so one can run 'pacman -S kde' and
install all files from the KDE group
Not sure about the other things though, those sound like some very good ideas that should be considered and hopefully they aren't too hard to implement.
Kritoke
Similar Messages
-
Who got this brilliant idea and change thing that way : when you want to pick up a contact on your iphone, you first have to cross the group and then click end ? Did you hire an employee from Microsoft ? Apple MUST remain SIMPLE to use !!!
Claudius,either you didn't read my post, or you jumped to conclusions. I had a skype account that was created using a microsoft account (NOT THE ACCOUNT I AM USING NOW). PURE MICROSOFT ACCOUNT NO OTHER ACCOUNT LINKING.I had to change the primary mail of that account.I was told "no can do" by skype support.I found that if I went to account settings and clicked on the link on the line below the one that said "MICROSOFT etc" (labeled something along the lines of "TV or Device") I got the opportunity to set the password of the "live:username" account (WHICH YOU COINCIDENTALLY HAVE TO DO IF YOU WANT TO USE SMART TVs ETC).Once that was done, I COULD SUCCESSFULLY DO WHAT SKYPE SUPPORT SAID WAS IMPOSSIBLE- I could change the primary mail address. once that was done, and NOT BEFORE, I linked the account to a facebook account as well, just to be sure I have more than one way to access the skype account. What caused you to get the impression that I was writing something else? furthermore this sentence - "The solution you described in your initial message isn't actually once since all the time you were operating on different account that weren't actually linked" does not make sense, I think you mis-edited it.and I need to point out that you are incorrect. I WAS NOT OPERATING ON DIFFERENT ACCOUNTS I WAS OPERATING ON ONE SKYPE ACCOUNT, THAT WAS CREATED USING A MICROSOFT ACCOUNT just like you say you recommend. I still don't know how you can misread my initial entry like that. If you have a better solution to my initial problem - changing the primary mail of a skype account created throuth either a microsoft account or a facebook account, Please write a sticky to explain how to do it, and please inform skype support that Yes it can be done, and this is the way it is done. So far my "lucky shot" seems to be the only way to do it.
-
Hi I have just got some wireless head phones and while using Bluetooth with my iPhone 4S the sound breaks up all the time but if I use a friends iPhone 5 or my iPad it's fine no problems atall! Any ideas what the problem could be people??????
Unpair the headset from the phone with the problem. Restart the phone (hold HOME and SLEEP until an Apple logo appears), the pair the headset again. Also, look for things nearby that may be causing interference in the Bluetooth band. Cordless phones are a common cause of interference.
-
Is there any way to send apple new feature ideas for upcoming phones?
I hate turning my phone on and off to replay youtube songs. I was was wondering if there is a forum somewhere where we can give ideas to apple. Like adding a play button like the one on the headphones under the the 2 volume buttons so you can control your music without turning your iPhone on.
Click here and fill out the form.
(121746) -
Just upgraded my old iWeb app to version 3.0.4 from an iLife 11 disk. I like some of the newer features but it seems to have one glitch: when I upload the pages to my ftp server, the automatic navigation bar at the top of the page disappears. Any ideas? Thanks.
Looks like a couple scripts are missing:
If you republish the entire site iWeb should recreate these for you...
I don't use the built-in navigation. I usually just create my own:
http://jeffnitschke.com/Home.html -
When trying to upload files I received the following error: "The Java Wizard cannot run. Please configure your browser to allow Java applets to access the filesystem."
If the problem is with a site that is hosted using MOVEit DMZ by Ipswitch, please notify the site owner of the issue and ask them to apply the patch that is available on the support site to resolve the issue.
This is a better resolution than downgrading your version of Java that was updated due to security issues. -
Best export settings? Post your tips!
I have been using iMovie for a long time. I have messed with settings quite a bit but the files always come out huge. I have seen other people's QT movies with great image quality for small file size. I have no idea how they do it.
My best experience in iMovie is to use the CD-ROM setting for export. This gives it the window size that I want, with a small file size, while maintaining pretty good image quality.
I'm talking about custom settings here. I need something other than the pre-made settings. There are so many custom options, but they're all way over my head. My goal is to use something other than h264, but keep the CD-ROM quality and size.
Does anyone have any good custom settings they recommend for getting a good balance of dimensions, image quality, and file size?
If so, post your tips! Let us know your favorite export settings!
--TimothyThe export settings are determined by the way the file is to be viewed.
"Local" files (those on CD's or fast networks) can be much larger in file size because bandwidth isn't much of an issue. Sent to iDVD and they make great videos that can only play in DVD players or software.
"Web" based files are a new can of worms because each persons opinion of "good" and also "small" file size differ so much.
Best advice anyone can give you is for you to make your own sample export "tests":
Take a minute sample (a part that has high action and motion) and choose the "Expert Settings" to send the file to QuickTime.
Try various video codecs and adjust the data and frame rate to raise or reduce file size.
Try AAC audio (very popular audio format) but set the frequency to "half" of CD quality (22050 Hz). This will be half as large in file size.
If your camera didn't record in stereo (most don't) set the file to mono and you reduce the file size in half again.
Compression is nearly an art form and the options in the expert settings can be a bit confusing. -
Proof: ever running left fan is the harddrive! Post your drives!
Hi!
I know there are some posts around here from users that report that their left fan is always running. I started one of those threads myself. Therefore I also know that there is debate, whether this sound comes from the harddrive or from the left fan spinning slowly.
Yesterday I was in a store because my mbp made all kind of noises but this constant sound that seemed to be rather loud on my book was my major concern (I can hear it from a few meters away in a silent environment in which I work most of the time). The technician tried some hacks to shut off the harddrive, but they seemingly didn't work (he actually concentrated on the whine because it was too loud in the store too hear the "swoosh" and because it also has a very intense mooing and a bent case, it's still doa and will be replaced in the next days).
Anyway, today I suddenly noticed that the noise had stopped. I was extatic. As soon as I clicked on something, the noise would start again though.
So: What did the technician do? He set the disksleep timer to a minute. I thought, it then would spin down for a minute. That's why it didn't seem to work, when I ran the command in terminal again in a quiet environment. So after a minute now, my harddisk would spin down.
So here is how you can test if your drive is the everlasting "swoosh"-producer. Don't do anything of the following if you feel as if you had no idea of what you are doing! I can give you no warranties at all (esp. harddrive-damage. See question below! I think it's best to reimpose your normal energy saving settings afterwards and not let the disk spin down every minute)!!!
- Open a terminal-window (it's in applications->utilities)
- Type sudo pmset -a -g disk and note the "disksleep" settings for battery and ac.
- Type in the following command:
sudo pmset -a disksleep 1
You will then need to enter your administrator password.
This will actually set your disksleep timer to a minute (for battery and ac. If you only want to test this for one of those states, use -b (battery) or -c (charger) instead of -a. This could make it easier to go back to your former settings afterwards, in case your ac and batterysettings differ). It is normally tied to the sleep mode of your mbp in general. That's why it's easy to think it's the fans.
- To check, if it worked, enter:
sudo pmset -a -g disk
The new time should then show up under disksleep for both ac-power and battery.
Then just don't touch the book for a minute. Don't do anything with it. Don't click anywhere. After a minute, the harddrive should spin down, leaving you with complete silence. As soon as you do anything that requires hardware access (even clicking on a scrollbar in a programm that runs from an external disk) you will hear the harddrive spin up.
Changing the disksleep might actually change your energy settings. So after trying this you can reset the disksleep to it's previous status by going into the energy saving preferences and readjusting everything. Use the sudo pmset -a -g disk to check if everything is back to normal. Maybe you need to go into the manager another time so the changes will be made.
My question is: Does it hurt the harddisk to spin up and down often? When I set this to a minute and e.g. write a post here, it will spin down or when I read a webpage, it will spin down until the next click of my mouse. So there isn't so much use for it anyway. But will it damage the harddrive over time when it is spinning down so often?
If you think your mbp is very silent, I'm interested in what harddrive you have. If you think, your mbp is unnervingly loud, please post your harddrive as well. (you can find the info in finder->applications->utilities->system profiler->serial-ata)
Mine is a:
Capacity: 74.53 GB
Model: TOSHIBA MK8032GSX
Version: AS114BSo here is how you can test if your drive is the
everlasting "swoosh"-producer. Don't do anything of
the following if you feel as if you had no idea of
what you are doing! I can give you no warranties at
all (esp. harddrive-damage. See question below! I
think it's best to reimpose your normal energy saving
settings afterwards and not let the disk spin down
every minute)!!!
- Open a terminal-window (it's in
applications->utilities)
- Type sudo pmset -a -g disk and note the
"disksleep" settings for battery and ac.
- Type in the following command:
sudo pmset -a disksleep 1
You will then need to enter your administrator
password.
This will actually set your disksleep timer to a
minute (for battery and ac. If you only want to test
this for one of those states, use -b (battery) or -c
(charger) instead of -a. This could make it easier to
go back to your former settings afterwards, in case
your ac and batterysettings differ). It is normally
tied to the sleep mode of your mbp in general. That's
why it's easy to think it's the fans.
- To check, if it worked, enter:
sudo pmset -a -g disk
The new time should then show up under disksleep for
both ac-power and battery.
Then just don't touch the book for a minute. Don't do
anything with it. Don't click anywhere. After a
minute, the harddrive should spin down, leaving you
with complete silence. As soon as you do anything
that requires hardware access (even clicking on a
scrollbar in a programm that runs from an external
disk) you will hear the harddrive spin up.
Changing the disksleep might actually change your
energy settings. So after trying this you can reset
the disksleep to it's previous status by going into
the energy saving preferences and readjusting
everything. Use the sudo pmset -a -g disk to
check if everything is back to normal. Maybe you need
to go into the manager another time so the changes
will be made.
Mine's silent, but then I have a different HD spec from your's.
My question is: Does it hurt the harddisk to spin up
and down often? When I set this to a minute and e.g.
write a post here, it will spin down or when I read a
webpage, it will spin down until the next click of my
mouse. So there isn't so much use for it anyway. But
will it damage the harddrive over time when it is
spinning down so often?
The HD is a finite par, so increasing its usage above the norm. will probably decrease its life-span of effective use.
If you think your mbp is very silent, I'm interested
in what harddrive you have. If you think, your mbp is
unnervingly loud, please post your harddrive as well.
(you can find the info in
finder->applications->utilities->system
profiler->serial-ata)
Mine is a:
Seagate Momentus -
Steps to link a report to Web Application Form. Post Your Opinion
Hi friends,
After going through it what is your opinion. please do post your opinion.
Could any one give the complete steps of Linking a report to web form so that when called / clicked the link the report can display the data.
I have unchecked the "Report Option -> Save Data with Reports". So that the report could not take extra space.
I have DB connection code in my .aspx.vb file, it is as follows:
Private Sub ConfigureCrystalReports()
Dim fileName As String = "Reports\" & ReportID & ".rpt"
Dim reportPath As String = Server.MapPath(fileName)
myRepDoc = New ReportDocument()
myRepDoc.Load(reportPath)
myCrystalReportViewer.ReportSource = myRepDoc
myCrystalReportViewer.RefreshReport()
Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
If Session("reportConnectionInfo") IsNot Nothing Then
Dim ConnInforArrList As ArrayList = DirectCast(Session("reportConnectionInfo"), ArrayList)
myConnectionInfo.ServerName = ConnInforArrList(0)
myConnectionInfo.DatabaseName = ConnInforArrList(1)
myConnectionInfo.UserID = ConnInforArrList(2)
myConnectionInfo.Password = ConnInforArrList(3)
Else
lblMessage.ForeColor = Drawing.Color.Red
lblMessage.Text = "Session is off. Please Relogin to See the Report."
End If
SetDBLogonForReport(myConnectionInfo, myRepDoc)
SetDBLogonForSubreports(myConnectionInfo, myRepDoc)
myCrystalReportViewer.SelectionFormula = GetFieldName(ReportID) & "='" & Session("CompCode") & "'"
myCrystalReportViewer.Visible = True
End Sub
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
Dim myTables As Tables = myReportDocument.Database.Tables
For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
myTableLogonInfo.ConnectionInfo = myConnectionInfo
myTable.ApplyLogOnInfo(myTableLogonInfo)
Next
End Sub
Private Sub SetDBLogonForSubreports(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
Dim mySections As Sections = myReportDocument.ReportDefinition.Sections
For Each mySection As Section In mySections
Dim myReportObjects As ReportObjects = mySection.ReportObjects
For Each myReportObject As ReportObject In myReportObjects
If myReportObject.Kind = ReportObjectKind.SubreportObject Then
Dim mySubreportObject As SubreportObject = CType(myReportObject, SubreportObject)
Dim subReportDocument As ReportDocument = mySubreportObject.OpenSubreport(mySubreportObject.SubreportName)
SetDBLogonForReport(myConnectionInfo, subReportDocument)
If myReportObject.Name = "Subreport1" Then
Dim lvSec As Section = subReportDocument.ReportDefinition.Sections("DetailSection1")
If Not lvSec Is Nothing Then
Dim t1 As TextObject
t1 = lvSec.ReportObjects("txtEmpName")
t1.Text = Session.Contents("EmpName")
Dim t2 As TextObject
t2 = lvSec.ReportObjects("txtRepID")
t2.Text = Request.QueryString("REPID")
End If
End If
End If
Next
Next
End Sub
Please do help me out as the data of report is not getting displayed on the report.
After going through it what is your opinion. please do post your opinion.
While creating the Report has the following Report Options on / checked.
1. Database Server is Case-Incensitive
2. Use Indexes Or Server For Speed
3. Verify on First Refresh
4. Show Preview Panel
5. Display Alerts on Refresh
6. Select Distinct Data for Browsing
Do I have check or uncheck any other option?
Thanks and regards
Edited by: Md. Mushtaque on Sep 6, 2008 2:50 PM
Edited by: Md. Mushtaque on Sep 8, 2008 9:27 AM
Edited by: Md. Mushtaque on Sep 8, 2008 12:14 PMSir AG,
Thanks a lot for replying and spending your valuable time for my problem.
Sir, I just want to put this in your knowledge that my application is web based application and I am calling these reports through web forms i.e. of ASP.NET coded in vb from .aspx.vb files.
So as per the code I have attached, I have this
Option Explicit On
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Next for ReportDocument Object:
Dim fileName As String = "Reports\" & ReportID & ".rpt"
Dim reportPath As String = Server.MapPath(fileName)
myRepDoc = New ReportDocument()
myRepDoc.Load(reportPath)
myCrystalReportViewer.ReportSource = myRepDoc
Above is the code used by me in Page_Init and I have already tested it from Page_Load. I have got few suggestions from this forum that I should put this code in Page_Init only.
Lastly:
The database connectivity code:
Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
If Session("reportConnectionInfo") IsNot Nothing Then
Dim ConnInforArrList As ArrayList = DirectCast(Session("reportConnectionInfo"), ArrayList)
myConnectionInfo.ServerName = ConnInforArrList(0)
myConnectionInfo.DatabaseName = ConnInforArrList(1)
myConnectionInfo.UserID = ConnInforArrList(2)
myConnectionInfo.Password = ConnInforArrList(3)
Else
lblMessage.ForeColor = Drawing.Color.Red
lblMessage.Text = "Session is off. Please Relogin to See the Report."
End If
SetDBLogonForReport(myConnectionInfo, myRepDoc)
SetDBLogonForSubreports(myConnectionInfo, myRepDoc)
SetDBLogonForReport(myConnectionInfo, myRepDoc)
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
Dim myTables As Tables = myReportDocument.Database.Tables
For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
myTableLogonInfo.ConnectionInfo = myConnectionInfo
myTable.ApplyLogOnInfo(myTableLogonInfo)
Next
End Sub
This code I have got from a sample of the forum itself.
Sir, after all these effort and the unchecking of option "Save Data with Report" on calling the reports from my forms it is showing blank report. No data from the database is coming form the database.
I have uncheked the option "Save Data with Reports" to get the updated data each time the report has been called but now the status is that nothing is coming.
Thanks again for you precious and valuable effort to help me but the my problem is unsolved, So sir please if you could put an eye on it and help me out to get rid of this problem, I will be very thankful to you for your kind help.
Thanks and regards
Mushtaque -
Hi ... After I have installed IOS 6 on my Iphone 4, the WiFi connection is trying to authenticate in the Apple site but the page is not found.
Do you have any idea on how to bypass this authentication ??
Regards,
GilsonHi...
After I have wait for 30 minutes without do anything, the wifi interface worked.
I don't know if Apple could fix the issue on their site or the reboot of the Iphone solved the problem.
I'm installing IOS 6 on the Iphone 4 of my wife. Let's see if the behaviour is the same.
I will post the informations after finish the installation.
Gilson -
Wireless Issues? Post your router.
I'm finding that lots of people are posting issues with the DLink DI-614+ (I have issues with two of those) and the Airport Extreme.
Maybe isn't an issue with older routers? idk, but I had good speed on the UMN campus (I believe they use cisco access points) and since using consumer router I've got junk.
I'm testing an 802.11g Netgear tonight, I'll post results.
Please Post your Routers and if they are 802.11 A, B, or G
I have issues on:
Dlink 614+ 802.11b (2 of them actually)DLINK DI-604 router with a DLINK DWL-2100AP wireless access point.
Access point running WPA encryption and set to AES, not broadcasting SSID.
Router set to DHCP for the LAN and connected to a DSL modem.
Access Point set to no DHCP obviously and gets IP's from the router.
Access Point using NO turbo or superG whatever modes, it is set to "Wireless G only" as only G NIC's on my network.
DSL speed is 2500 kbps down.
FACTS:
- There have never been any speed or connection issues with the D-Link router or access point among my other Windows machines - a desktop (ethernet) and two Sony Vaio laptops (wireless G).
- My original Mac Book Pro (bought last Friday) with a "W8610.." serial number had constant
trouble connecting to this network and ran VERY slow with frequent disconnects and unresponsiveness when browsing. Latency was terrible and would consistently take over thirty seconds to load a page.
It always "saw" the access point on boot up but would fail to connect despite network status showing full signal strength and "Connected".
Could not ping or use web. The access point DID show the MBP as connected with a good DHCP IP, but nothing on the MBP.
Required me to open diagnostics on the MBP and re-enter the SSID, security type and password every start up. Tried setting the access point to enable broadcast of SSID - made no difference.
Changed WPA to "auto" and TKIP - no joy.
- "W6810.." MBP got extremely hot, had no whine issue or diplay issue but was too hot to touch frequently during use despite being elevated on a Podium Pad. (Did the PSU reset thing - no change in heat.)
- TODAY, replaced the "W8610.." MBP today from the Apple store with a new MBP - new serial is "W8611.." and is a later revision of the MBP - this according to the Apple tech I spoke with this morning who also confirmed the logic board replacements in later "D" revision models.
- The new MBP has zero problems with wireless - it connected right away using the same settings on the DWL-2100AP and AirPort NIC as the previous MBP. It connects on reboot and detects, conencts to the AP without problem.
Speed is excellent and exactly where it should be.
- The new MBP is DRAMATICALLY COOLER than the original. The difference
is nothing less than amazing - the area above the function keys is barely warm even with the MBP running intensive apps.
- Note that on both MBP's I ran and installed all software updates including OS X.
- Apple Store tech and manager (arrogant brat) insisted there was no such problem with heat or logic board issues, no network issues and said they had heard no such thing from Apple despite my conversation with Apple tech earlier that day. Said I should buy an AirPort base station or give up on the networks, blamed DLINK hardware.
Took an hour of insisting they replace it to get anywhere - they ran hardware tests on the old MBP and found no errors - said heat was "normal" despite it being too hot to touch and MUCH hotter than the display laptops.
Mac Book Pro 2.16 GHz Mac OS X (10.4.6) -
What has the Apple support team done to the Top Sites screen? I just accepted an automatic update to be downloaded to my iMAC, and as a result of this "fix installation" the layout of the Top Sites screen has been terribly "destroyed"! What's the idea?
If you are referring to the non-panorama , but rather the flat look, well that's what they did.
You can give your opinion here:
http://www.apple.com/feedback -
Corecenter 12v readings plz post yours
Hi using a Antec 480w Psu at the moment
my 12v reading in bios and corecenter reads 11.46-11.56v
saw somebody with a chieftech 360w psu and he got 11.85v readings.
is this someway faulty readings or a sign of a weak psu?
Plz post your 12v reading in Corecenter/Bios
Could be that this is holding me back. i dunno
Thx in advanceNice thinking of getting that psu also.
Gonna test with a multimeter and check the voltages.
Seems weird that so many ppl get better readings on the same board.
If we had different boards there would be useless to compare Bios/Program readings. But comparing it this way must be good i guess.
Thanks for your help guys
Quote
Originally posted by Radical_53
Bios: 12.34V
Windows: 12.06V
Had 11.67V under windows with my Antec 550W... the OCZ gives me these voltages on default, rails are not changed or raised by me. -
Kt600 delta post your gripes here!
Major gripes with this board :-
1.why should i have to spend another £50 - £80 on a top of the range psu
just to run a £55 motherboard ?
The amount of people on this forum who have had to upgrade their psu just
to get this board up and running is unbelievable
2. heat :- this board runs a good 10 - 15 degrees higher than its nforce 2
counterparts ! so you have to go out and buy uprated cooling to
get a stable system
never mind trying to clock it
kt6 chipset :-this is the most unstable board i have ever fitted costing more in the long run to get it all up and running than any other ive built
shall stick to the nf2 in future
feel free to post your moans1: The heat on the cpu, increased ALOT from my old KT400, very strange. It vas before, 39-40 (Idle) now its 45-46, much more I think, maybe there is something wrong with the sensor, or the KT400 had a 'good n' sweet days' sensor.
Well, that would be everything I think.
I ran my XP2500+ at 3200+ yesterday, and it was very stable, but I had to increase my TwinMOS PC2700 memory to 3v to have them in 400 mode. And even then I had to remove Ultra mode and everything else fast, that made the computer slower, atlest in 3dmark, then default clock on everything So I will just get better mem and then I will go 3200+ everyday, I hope, if there wont be a problem with the heat.
Using a open window, and a Cooler Master Aero 7 LITE at 45% speed, I suppose I can increase the speed if I want to clock but Its very loud then. I think, as I said that there might be some error with the sensor, cause the window was open, and the computer was just under it and totaly open, no plates or sidepanels or something, also it was -3C outside (sweden). The old motherboard (K4v) got much colder.
EDIT: I have a Q-TEC 550W (you say they suck, not mine ) and I still got very good voltage even when Im in so extreme overclock (to me that is extreme ) -
How can i delete the new feature "get in contact with your favourite persons"?? When u press the "home" button twice, theres a list on top of the ipad with the last persons youve been in contact with. How do i delete that, or some of them ;-) Sorry for the danish
You can turn that feature off in Settings>Mail, contacts, calendars>Contacts>Show in App Switcher>Recents>Off.
Maybe you are looking for
-
File has to pass through FTPS connection.. Connection parameters?
Hi, I want to transfer the file through FTPS connection. Partner side provided the following details as connection parameters. - IP : 129.32.169.140 - POrt: 990 User name Password PASV mode SSL Direct, OpenSSL,SSL Listing, SSL Transfers. Kindly let
-
I"ve installed accidentally a "Radio Bar", and how can I remove it?
Hi there! How can I remove a certain "Radio Bar" that was installed accidentally above my Firefox Bar? Thanks a lot!
-
How to search roles by Query in SAP BW?
how to search roles by Query in SAP BW?
-
Getting notifications I havent subscribed to. PLEASE MAKE THEM STOP!!!!!!!
I posted a question this morning. Now my Inbox is full of mail from Apple Discussions Descriptions. But I have never subscribed to any. The instructions for unsubsribing are: 1) Visit <http://discussions.apple.com> 2) Login, if you have not already.
-
GSSContext.isEstablished() always return false
I'm writing a servlet filter for Kerberos single-signon between IE and websphere 5 on Win2000 through JGSS-API and SPNEGO. I use com.ibm.security.auth.module.Krb5LoginModule as the login module and I've created the keytab and put in the app. server.