Got an Error in EEW
Hi friends,
I want to add a field to Business Transaction through EEWB.
I have followed the following steps
1.created project under the worklist
right click on project and said create extension
2.eewb Bui Obj as Business Transaction
and extension as ADD_NEW_FIELDS
3.Then it opens a wizard
where i give all data and say complete
4.After that the Error Occured is
*Definition CRM_BTX_ADD_NEW_FIELDS may not be created for another system type *
thanking u
sree
Hi,
check your customizing in transaction EEWC.
Look at note 649336 to set up the customizing.
Then the error didn't occur for us anymore.
Regards
Similar Messages
-
Previously I was using OSX 10.8 and Web Disk was working great.
Since I upgraded to OSX 10.9 Web Disk Dont Attach to my compputer and give me this ERROR:
FInder got an error: Network file permission error.
When I got this ERROR first time I searched GOOGLE and found this link: http://cammodude.blogspot.no/
And I did:
To force all connections to be SMB1:
Open A terminal window
paste in the following line followed by the return key(should be all on one line):
echo "[default]" >> ~/Library/Preferences/nsmb.conf; echo "smb_neg=smb1_only" >> ~/Library/Preferences/nsmb.conf
What the command does:
Creates a file called nsmb.conf in your home directory at the path ~/Library/Preferences/nsmb.conf.
Adds directives to force SMB connections to use the SMB1 protocol. This is slower but stable.
Then I could use Web Disk on OSX 10.9 after executing this command in Terminal.
But now I restarted my Macbook and now Im NOT able to connect to Web Disk and get the same ERROR.
FInder got an error: Network file permission error
After trying 100 times it attaches 1 time but then show this ERROR:
Can't get <<class cdis>> "my.server.com/2078" of application "Finder".
If this happen then I can see the files in Finder and see the Contents and Size of files but if I open a PHP file in BBEdit then it shows BLANK.. But actually it is NOT blank.
Now Im stuck How can I solve this? All help is highly appericated..
Thank you so much...Hi,
Make sure to chmod the app, something like this :
chmod -Rf 777 secure_site_WebDisk.app
(in my case the CPanel provided the app for my OSx version.) -
I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean and how do I fix it?
The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.
-
One day when tried to restart my iphone 4, I got a screen asking me to connect to itunes. Itunes asked me to restore my phone. When I tried to restore, I got an Error 23 saying it cannot be restored. I tried the phone support. They asked to contact the service centre. I then tried the service centre guys. They clearly did not know what Error 23 was. They asked to contact the apple support again. After 2-3 guys tried to blow me off saying it is a hardware issue, I asked for a senior analyst. Apple support assigned a senior guy who said he will contact the engineering team. After 2 days, I was told that the engineering team has confirmed that this is a hardware issue.
What I am surprised about is that no one seems to have done any analysis or debugging to figure this out. How do they decide that this is a hardware issue?
The first time I tried it from my laptop and got this message. The support guy told me that my laptop may have an antivirus software which may be causing this issue. So I took it to the service centre. They tried the same restore from their machine and got the exact same error.
The senior analyst that was later assigned to my case, again asked me to restore from my machine. I got the same error.
Basically what they had verified in all these activities was that I was getting error 23. I dont know how they decided that this was due to hardware issues?
Online documentation on Error 23 is vague. It is bunched long with other error codes. There is no clear explanation of what Error 23 is.
But most importantly It says 'In rare cases, this may be a hardware issue'.
So if it is a hardware issue in rare case, how was my case deemed to be a 'rare case'?
When I asked them to escalate this, they said that there is no way to escalate.
I have had a horrible experience with Apple support. Till this point I used to think of Apple as a class apart. But now I am totally disillusioned.
My phone was about a year and a half old. I dont mind it if it actually turns out to be a hardware issue. I will take it as my bad luck.
But I dont see how the support guys decided that this is a hardware issue. I need to know.
And secondly I am shocked that Apple has no escalation path.
Can anyone please help?Hi @imobl,
You sound like an Apple support guy who hasn't been able to answer my questions.
To respond to some of the points you made,
- I did not ignore Ocean20's suggestion. If you has read my post, you would have known that I took my phone to the apple service centre where they tried this restore on THEIR machines. I am assuming that Apple guys know how not to block iTunes. So I actually do not understand your point about me trying the hosts file changes on my machine. Do you not believe that apple tested this issue with the correct settings?
- you also give a flawed logic of why the issue is a hardware issue. You mentioned that If I thought that the issue was with the software, i should try a restore and getting it to work. The problem is that my error (23), and many others comes up when the restore fails. And you would be astonished to know that not all errors are hardware errors. Sometimes even software errors prevent restores. Funnily enough Apple itself mention that 'in rare cases, error 23 could be hardware related'.
- all Apple has done so far is replicate the issue. I don not know how anyone can conclude that the issue is a hardware issue.
And by the way, I am not certain that this is a software bug. Again if you read my Posts, you will notice I only want a confirmation,/proof that the issue is hardware related as they mention..
Please refrain do. Responding if there is nothing to add. -
I tried updating my Iphone4 from iOS 6.1.4 to 7 via iTunes. After downloading, I got an error 4005 message during installation and now my phone is completely wiped out; is not being recognized by my PC; and all I get on the phone is a photo of a USB plug and the iTunes symbol! Can anyone, PLEASE, help?!?
The phones in recovery mode so if yu connect it to itunes it should ask to restore it back to the last back up you have done.
that should solve it for you... -
Please somebody help me,i´m a oracle jdeveloper beginner i got this error deploying my oracle application
[Waiting for the domain to finish building...]
[09:02:47 PM] Creating IntegratedWebLogicServer Domain...
*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
[09:06:58 PM] IntegratedWebLogicServer Domain processing completed successfully.
/home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain/bin/startWebLogic.sh
[Starting IntegratedWebLogicServer.]
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=512m
java version "1.7.0_15"
Java(TM) SE Runtime Environment (build 1.7.0_15-b33)
Java HotSpot(TM) 64-Bit Server VM (build 23.7-b01, mixed mode)
CLASSPATH=/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/oracle.jdbc_11.2.0/ojdbc6dms.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/jdk/lib/tools.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/server/lib/weblogic_sp.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/server/lib/weblogic.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/server/lib/webservices.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/modules/features/oracle.wls.common.nodemanager_1.0.0.0.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/internal/features/jrf_wlsFmw_oracle.jrf.wls.classpath_12.1.2.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/com.oracle.cie.config-wls-online_8.0.0.0.jar::/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/common/derby/lib/derbynet.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/common/derby/lib/derbyclient.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/common/derby/lib/derby.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/server/lib/xqrl.jar
PATH=/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/server/bin:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/org.apache.ant_1.7.1/bin:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/jdk/jre/bin:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/jdk/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/felisberto/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
Starting WLS with line:
/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/jdk/bin/java -client -Xms256m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/server/lib/weblogic.policy -Djavax.net.ssl.trustStore=/tmp/trustStore6365708649841247654.jks -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -Djava.endorsed.dirs=/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/jdk/jre/lib/endorsed:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/endorsed -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dopss.version=12.1.2 -Digf.arisidbeans.carmlloc=/home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain/config/fmwconfig/carml -Digf.arisidstack.home=/home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain/servers/DefaultServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/oracle.ossoiap_12.1.2,/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/oracle.oamprovider_12.1.2,/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/oracle.jps_12.1.2 -Doracle.mds.filestore.preferred=true -Dweblogic.jdbc.remoteEnabled=false -Dcommon.components.home=/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common -Djrf.version=12.1.2 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain -Doracle.server.config.dir=/home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain/config/fmwconfig/servers/DefaultServer -Doracle.domain.config.dir=/home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain/config/fmwconfig -da -Dwls.home=/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/server -Dweblogic.home=/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/server -Djps.app.credential.overwrite.allowed=true -Djavax.management.builder.initial=weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder -Djava.util.logging.manager=oracle.core.ojdl.logging.ODLLogManager weblogic.Server
<Nov 26, 2013 9:08:06 PM CET> <Info> <Security> <BEA-090905> <Disabling the CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true.>
<Nov 26, 2013 9:08:08 PM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true.>
<Nov 26, 2013 9:08:16 PM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 23.7-b01 from Oracle Corporation.>
<Nov 26, 2013 9:09:07 PM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 12.1.2.0.0 Fri Jun 7 15:16:15 PDT 2013 1530982 WLS_12.1.2.0.0_GENERIC_130607.1100>
<Nov 26, 2013 9:09:13 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>
<Nov 26, 2013 9:09:13 PM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>
<Nov 26, 2013 9:09:13 PM CET> <Notice> <Log Management> <BEA-170019> <The server log file /home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log is opened. All server side log events will be written to this file.>
Nov 26, 2013 9:09:16 PM oracle.security.jps.JpsStartup start
INFO: Jps started.
Nov 26, 2013 9:09:25 PM oracle.security.jps.internal.idstore.util.LibOvdUtil pushLdapNamesToLibOvd
INFO: Pushed ldap name and types info to libOvd. Ldaps : DefaultAuthenticator:idstore.ldap.provideridstore.ldap.
<Nov 26, 2013 9:09:29 PM CET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
2013-11-26 21:09:35.605/149.719 Oracle Coherence 12.1.2.0.0 <Info> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Loaded operational configuration from "jar:file:/home/felisberto/Oracle/Middleware/Oracle_Home/coherence/lib/coherence.jar!/tangosol-coherence.xml"
2013-11-26 21:09:35.856/149.970 Oracle Coherence 12.1.2.0.0 <Info> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Loaded operational overrides from "jar:file:/home/felisberto/Oracle/Middleware/Oracle_Home/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
2013-11-26 21:09:35.870/149.984 Oracle Coherence 12.1.2.0.0 <D5> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified
2013-11-26 21:09:35.887/150.001 Oracle Coherence 12.1.2.0.0 <D5> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Optional configuration override "cache-factory-config.xml" is not specified
2013-11-26 21:09:35.895/150.009 Oracle Coherence 12.1.2.0.0 <D5> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Optional configuration override "cache-factory-builder-config.xml" is not specified
2013-11-26 21:09:35.900/150.014 Oracle Coherence 12.1.2.0.0 <D5> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
Oracle Coherence Version 12.1.2.0.0 Build 44396
Grid Edition: Development mode
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
<Nov 26, 2013 9:09:54 PM CET> <Warning> <com.oracle.coherence> <BEA-000000> <2013-11-26 21:09:54.160/168.274 Oracle Coherence GE 12.1.2.0.0 <Warning> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): UnicastUdpSocket failed to set receive buffer size to 16 packets (1MB); actual size is 21%, 3 packets (224KB). Consult your OS documentation regarding increasing the maximum socket buffer size. Proceeding with the actual value may cause sub-optimal performance.>
<Nov 26, 2013 9:09:54 PM CET> <Warning> <com.oracle.coherence> <BEA-000000> <2013-11-26 21:09:54.164/168.278 Oracle Coherence GE 12.1.2.0.0 <Warning> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): PreferredUnicastUdpSocket failed to set receive buffer size to 1444 packets (2MB); actual size is 10%, 157 packets (224KB). Consult your OS documentation regarding increasing the maximum socket buffer size. Proceeding with the actual value may cause sub-optimal performance.>
<Nov 26, 2013 9:10:46 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY.>
<Nov 26, 2013 9:10:46 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>
<Nov 26, 2013 9:17:48 PM CET> <Warning> <oracle.adf.share.logging.internal.perf.SensorTable> <BEA-000000> <Detected that sensors created in an invalid ADFContext were later visible in a valid ADFContext. The sensors should be created in a valid ADFContext. Please enable finest logging for more information.>
<Nov 26, 2013 9:18:24 PM CET> <Notice> <Log Management> <BEA-170027> <The server has successfully established a connection with the Domain level Diagnostic Service.>
<Nov 26, 2013 9:18:25 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN.>
<Nov 26, 2013 9:18:25 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING.>
<Nov 26, 2013 9:18:25 PM CET> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the kss keystore file kss://system/demoidentity.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the kss keystore file kss://system/trust.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 127.0.0.1:7102 for protocols iiops, t3s, ldaps, https.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on fe80:0:0:0:20c:29ff:fe86:8af:7102 for protocols iiops, t3s, ldaps, https.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:20c:29ff:fe86:8af:7101 for protocols iiop, t3, ldap, snmp, http.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on 0:0:0:0:0:0:0:1:7102 for protocols iiops, t3s, ldaps, https.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.36.128:7101 for protocols iiop, t3, ldap, snmp, http.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 192.168.36.128:7102 for protocols iiops, t3s, ldaps, https.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <WebLogicServer> <BEA-000331> <Started the WebLogic Server Administration Server "DefaultServer" for domain "DefaultDomain" running in development mode.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <WebLogicServer> <BEA-000360> <The server started in RUNNING mode.>
IntegratedWebLogicServer startup time: 1632880 ms.
[IntegratedWebLogicServer started.]
[Running application HR_EJB_JPA on IntegratedWebLogicServer...]
[09:58:20 PM] EJB Module ModelEJB.jar recognized in project Model.jpr
[09:58:21 PM] Web Module ViewControllerWebApp.war recognized in project ViewController.jpr
[10:00:25 PM] ---- Deployment started. ----
[10:00:25 PM] Target platform is (Weblogic 12.x).
[10:02:15 PM] Retrieving existing application information
[10:03:22 PM] Running dependency analysis...
[10:03:27 PM] Deploying 3 profiles...
[10:05:26 PM] Wrote Web Application Module to /home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/o.j2ee/drs/HR_EJB_JPA/ViewControllerWebApp.war
[10:05:55 PM] Wrote EJB Module to /home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/o.j2ee/drs/HR_EJB_JPA/ModelEJB.jar
<Nov 26, 2013 10:18:30 PM CET> <Warning> <Socket> <BEA-000449> <Closing the socket, as no data read from it on 127.0.0.1:38,851 during the configured idle timeout of 5 seconds.>
[10:19:26 PM] Wrote Enterprise Application Module to /home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/o.j2ee/drs/HR_EJB_JPA
[10:20:21 PM] Deploying Application...
<Nov 26, 2013 10:20:55 PM CET> <Warning> <Application Client> <BEA-2162200> <No Main-Class defined in the manifest file of Java Module: empty.jar. This module will be treated as a utility JAR and subsequent initialization steps will be skipped.>
<Nov 26, 2013 10:21:13 PM CET> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID "1385500846751" for task "0". Error is: "weblogic.application.ModuleException: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: ORA-01034: ORACLE not available
ORA-27102: out of memory
Linux-x86_64 Error: 12: Cannot allocate memory
Additional information: 1
Additional information: 124747800
Additional information: 8
weblogic.application.ModuleException: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: ORA-01034: ORACLE not available
ORA-27102: out of memory
Linux-x86_64 Error: 12: Cannot allocate memory
Additional information: 1
Additional information: 124747800
Additional information: 8
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:338)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:100)
at weblogic.application.internal.flow.ModuleStateDriver$1.next(ModuleStateDriver.java:172)
at weblogic.application.internal.flow.ModuleStateDriver$1.next(ModuleStateDriver.java:167)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)
Truncated. see log file for complete stacktrace
Caused By: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: ORA-01034: ORACLE not available
ORA-27102: out of memory
Linux-x86_64 Error: 12: Cannot allocate memory
Additional information: 1
Additional information: 124747800
Additional information: 8
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:349)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1309)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1226)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:240)
at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1566)
Truncated. see log file for complete stacktrace
>
<Nov 26, 2013 10:21:29 PM CET> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application "HR_EJB_JPA".>
<Nov 26, 2013 10:21:29 PM CET> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: ORA-01034: ORACLE not available
ORA-27102: out of memory
Linux-x86_64 Error: 12: Cannot allocate memory
Additional information: 1
Additional information: 124747800
Additional information: 8
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:338)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:100)
at weblogic.application.internal.flow.ModuleStateDriver$1.next(ModuleStateDriver.java:172)
at weblogic.application.internal.flow.ModuleStateDriver$1.next(ModuleStateDriver.java:167)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)
Truncated. see log file for complete stacktrace
Caused By: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: ORA-01034: ORACLE not available
ORA-27102: out of memory
Linux-x86_64 Error: 12: Cannot allocate memory
Additional information: 1
Additional information: 124747800
Additional information: 8
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:349)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1309)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1226)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:240)
at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1566)
Truncated. see log file for complete stacktrace
>
[10:22:09 PM] Deployment cancelled.
[10:23:10 PM] ---- Deployment incomplete ----.
[10:23:24 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
#### Cannot run application HR_EJB_JPA due to error deploying to IntegratedWebLogicServer.
[10:23:42 PM] Cancel requested
[Application HR_EJB_JPA stopped and undeployed from IntegratedWebLogicServer]Hi,
It is not an application issue. DBA can extend the SGA for the Database based on his analysis
It is Your DBA call to check if you needs more SGA on the Database. DBA need to verify to find if it really need SGA, as there might be system parameters which are either blocking memory assignment or DB does not have memory at all.
Regards,
Kal -
Finder got an error. Application not running (-600)
I have a LaunchAgent that calls a shell script, at login. The shell script runs and determines the users AD container and then will runn the correct applescript application depending on the AD Container. The applescript applications simply mount up the users network volumes, runs a few do shell scripts and then exits.
It works and has been working for quite some time, under 10.5.x, 10.6.x, 10.7.x and even 10.8.x. But I have started getting a few users who are getting a rather odd message in the logs that the script creates and I can't really find anything on the error message.
"Finder got an error. Application not running (-600)"
If I log the user in and run the following at the command line:
launchctl unload name.of.plist
It will unload the launchagent.
If I type this at the commane line:
launchctl load name.of.plist
It works perfectly. No errors.
I can manually run the shell script it calls and that works fine.
I can also manually double click the apps and those run fine.
I've changed the permissions, I've recopied, re-imaged, but I can not figure out why the script won't sometimes and gives me that error message.
Has anyone seen this error message before and what I can try to do to fix it?
Thank you in advanced.This sounds like a typical race condition, and it's impossible to solve without seeing the script.
The issue is that your script is targetting some application that isn't available. Ordinarily AppleScript will launch an application if it's not already running, but during launch it's possible that your script is trying to target an application before it can be launched (because the user's envirnment is still loading).
So you need to look at the script to see what it's doing, and what apps it's targeting. The fix might be as simple as adding a few delays to allow the system to finish logging in, but t's hard to say without more data. -
I have a lot of files in Corel Painter 8's RIFF format. I want to write a script that opens a file and somehow forces Corel Painter 8 to save the file as a GIF. GUI scripting may be some help with the latter; now I am concentrating on finding RIFF files and opening them in Corel Painter 8.
I have a script that does a depth-first search of the folders starting at some root folder, using the Finder application to do the file-system stuff. It creates a list with
set docs to every document file of pages_folder whose file type = "RIFF"
as it loops through folders it adds to the list like this:
set more_documents to every document file of a_folder whose file type = "RIFF"
set docs to docs & more_documents
My naîve mental model is that docs is a list of document-file objects. Next I have a loop that attempts to strip out files for which a GIF file already exists (and is no older than the RIFF document). This works by deleting non-matching items like so:
if not isgifneeded then
set docs to items 1 thru (i - 1) of docs & items (i + 1) thru (length of docs) of docs
end if
Finally it tries to open one of the files in Corel Painter 8 using the Finder:
open item 1 of docs using "Corel Painter 8"
This does not work. I get an error message
Finder got an error: Can't get item 1 of {document file "bar" of folder "foo" of folder "blah" of folder "pdc" of folder "Users" of startup disk, ... }."
It lists all of the files. (The error message appears in a sheet that extends off the bottom of the screen!) They are identified in the message as document-file objects. The curly braces are, I believe, the AppleScript notation for a list. I expect to be able to obtain the first element of a list with ‘item 1 of xs’. My assumption is that the Finder’s open command would expect a document file object, or at least would be able to cope with being asked to open a document. What am I missing here?
PowerBook 12" without mini-DVI Mac OS X (10.4.7)Hi Damian and welcome to Apple Discussions!
One suggestion: try
tell application "Finder" to open item 1 of docs
(without 'using "Corel Painter 8"')
As far as the Finder is concerned, "Corel Painter 8" is just a string of characters. And telling the Finder to open a file is just the same as double-clicking it: the Finder knows which app to use - as long as these are native Corel Painter 8 docs.
Hope this helps,
H -
When I was prompted there was an update on iTunes I did as usual and began installing the update. Something happened during that time and I got an error saying it didn't download correctly. Now when I go to open iTunes it gives me an error message and says I need to re-install the program. I'm not sure how to do that. I am also concerned that I will lose all of the things that I have backed up from my phones, purchases, apps, etc. Can anyone please give me some insight on what to do?
ThanksSee... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562
littlered1382 wrote:
I am also concerned that I will lose all of the things that I have backed up from my phones, purchases, apps, etc.
It has always been Prudent to Create and Maintain a Backup of anything you would not like to lose. -
I need help to run this package and i got some error
create or replace
PACKAGE BODY SUBS_INS_API_sun
AS
PROCEDURE SUBSCRIBER_INS_sun
(SOURCE_SYS_ID IN VARCHAR2,
TRACKING_ID IN VARCHAR2,
ACCOUNT_NO IN VARCHAR2,
prepaidActDevDetails_tab IN prepaidactdvcdetailsobj_sun,
ERROR_CODE OUT VARCHAR2)
IS
Input_Parameter_Is_Null EXCEPTION;
pragma exception_init(Input_Parameter_Is_Null,-2000);
prepaidAccountDetails prepaidActDevDetails_tab:= prepaidActDevDetails_tab(NULL,NULL,NULL,NULL,NULL);
STATUS VARCHAR2(1):='1';
cust_no VARCHAR(10);
m_mac_id VARCHAR2(20);
subscriber_master_Rec subscriber_master%ROWTYPE :=NULL;
flg NUMBER(1);
BEGIN
IF(Source_Sys_Id IS NULL OR Tracking_Id IS NULL OR ACCOUNT_NO IS NULL OR prepaidAccountDetails.LAST=0) THEN
RAISE Input_Parameter_Is_Null;
END IF;
BEGIN
select cm_cust_no into cust_no from customer_master where cm_cust_id=ACCOUNT_NO and cm_status in('A','P','0');
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
STATUS:='0';
END;
BEGIN
FOR i IN prepaidAccountDetails.FIRST .. (prepaidAccountDetails.LAST) LOOP
prepaidAccountDetails1:=prepaidActDevDetails_tab(i);
prepaidAccountDetails1.Status_of_device:='1';
IF (prepaidAccountDetails.Account_id is NULL OR prepaidAccountDetails.Mac_Id is NULL or prepaidAccountDetails.LOB_value is NULL) THEN
RAISE Input_Parameter_Is_Null;
END IF;
IF(prepaidAccountDetails.LOB_value = 'VDO') THEN
IF(prepaidAccountDetails.Channel_Line_Up is NULL) THEN
Error_code :='SI002';
DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
STATUS:=0;
prepaidAccountDetails.Status_of_device:='0';
END IF;
END IF;
begin
select 1 into flg from subscriber_master where pm_phone_no=prepaidAccountDetails.Mac_Id and pm_status in('P','0','A','B');
EXCEPTION
WHEN NO_DATA_FOUND THEN
flg:=0;
END;
if(flg=1) then
DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
STATUS:=0;
prepaidAccountDetails.Status_of_device:='0';
END IF;
begin
select md_mac_id into m_mac_id from mac_details where md_mac_id=prepaidAccountDetails.Mac_Id and md_start_date<=sysdate
and md_status='A';
EXCEPTION when OTHERS then
Error_code :='SI004';
DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
STATUS:=0;
prepaidAccountDetails.Status_of_device:='0';
end;
if(STATUS= 1 and prepaidAccountDetails.Status_of_device='1') then
SELECT PM_SUBS_ACT_NO_SEQ.nextval
INTO subscriber_master_rec.PM_SUBS_ACT_NO
FROM dual;
subscriber_master_Rec.pm_phone_no :=prepaidAccountDetails.Mac_Id;
subscriber_master_Rec.pm_open_date :=sysdate;
subscriber_master_rec.pm_status :='P';
subscriber_master_rec.PM_CUST_LVL_YN:='S';
subscriber_master_rec.PM_EQUP_CODE:=prepaidAccountDetails.LOB_value;
subscriber_master_rec.PM_HOME_AREA:='HOM';
subscriber_master_rec.PM_USG_CODE:='USG';
subscriber_master_rec.PM_NO_TYPE:='S';
subscriber_master_rec.PM_TCG_CODE:='DEF';
subscriber_master_rec.PM_APLN_DATE:=sysdate;
subscriber_master_rec.PM_USER2:=prepaidAccountDetails.LOB_value;
subscriber_master_rec.PM_USER3:=prepaidAccountDetails.Channel_Line_Up;
subscriber_master_rec.pm_cust_no:=cust_no;
INSERT INTO subscriber_master VALUES subscriber_master_rec;
END IF;
END LOOP;
END;
END SUBSCRIBER_INS_sun;
END SUBS_INS_API_sun;
and
i got this error
Package Body PREPAID_TESTNEW.SUBS_INS_API@PREPAID_TESTNEW
Error(73,4): PL/SQL: Statement ignored
Error(73,99): PLS-00302: component 'LAST' must be declared
Error(87,6): PL/SQL: Statement ignored
Error(87,37): PLS-00302: component 'FIRST' must be declared
please help to run this package if anyone knowsnow i corrected my package. It working fine. But, how to run this package via procedure. my procedure check below. I give all the details about my package check below.
---pkg specification
create or replace
PACKAGE SUBS_INS_API_SS
IS
PROCEDURE SUBSCRIBER_INS_SS
(SOURCE_SYS_ID IN VARCHAR2,
TRACKING_ID IN VARCHAR2,
ACCOUNT_NO IN VARCHAR2,
prepaidActDevDetails_tab IN prepaidActDeviceDetails_tabobj,
ERROR_CODE OUT VARCHAR2);
END SUBS_INS_API_SS;
-----pkg body
create or replace
PACKAGE BODY SUBS_INS_API_SS
AS
PROCEDURE log_error (ip_code IN VARCHAR2,
ip_message IN VARCHAR2,
ip_description IN VARCHAR2)
IS
BEGIN
INSERT INTO ERR_LOG (IEL_REF_ID,
IEL_DATE,
IEL_CODE,
IEL_MSG,
IEL_DESC)
VALUES (IVRS_ERR_LOG_SEQ.NEXTVAL,
SYSDATE,
ip_code,
ip_message,
ip_description);
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
END log_error;
PROCEDURE INSERT_WS_LOG (SOURCE_SYS_ID IN VARCHAR2,
STATUS IN VARCHAR2,
TRACKING_ID IN VARCHAR2,
ACCOUNT_ID IN VARCHAR2,
MAC_ID IN VARCHAR2)
IS
ws_log_rec WS_LOG%ROWTYPE := NULL;
BEGIN
SELECT WS_LOG#REC#ID.NEXTVAL INTO ws_log_rec.rec#id FROM DUAL;
ws_log_rec.VER#ID := 1;
ws_log_rec.CRE#TS := SYSDATE;
ws_log_rec.wl_source := SOURCE_SYS_ID;
ws_log_rec.wl_status := Status;
ws_log_rec.wl_tracking_id := tracking_id;
ws_log_rec.wl_account_id := account_id;
ws_log_rec.wl_mac_id := mac_id;
INSERT INTO ws_log
VALUES ws_log_rec;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
END INSERT_WS_LOG;
PROCEDURE REPLICO_DEV_INFO( Acc_id IN VARCHAR2, Mc_Id IN VARCHAR2,channel IN VARCHAR2,
LOB_VAL IN VARCHAR2, outlet1 IN VARCHAR2, kit_cod IN VARCHAR2,
serial_No IN VARCHAR2, shipperr IN VARCHAR2, estm_recived_date IN date)
IS
Replico_device_info_det_Rec Replico_device_info_det%ROWTYPE := NULL;
REC_ID NUMBER;
BEGIN
SELECT REPLICO_DEVICE_INFO_DET#RECID.nextval INTO REC_ID FROM dual;
Replico_device_info_det_Rec.REC#ID := REC_ID;
Replico_device_info_det_Rec.ACCOUNT_ID := Acc_id;
Replico_device_info_det_Rec.MAC_ID := Mc_Id;
Replico_device_info_det_Rec.CHANNEL_LINE_UP := channel;
Replico_device_info_det_Rec.LOB_VALUE := LOB_VAL;
Replico_device_info_det_Rec.OUTLET := outlet1;
Replico_device_info_det_Rec.KIT_CODE := kit_cod;
Replico_device_info_det_Rec.SERIAL_NUMBER := serial_No;
Replico_device_info_det_Rec.SHIPPER := shipperr;
Replico_device_info_det_Rec.ESTIMATED_RECIVED_DATE := estm_recived_date;
INSERT INTO replico_device_info_det
VALUES Replico_device_info_det_Rec;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
END REPLICO_DEV_INFO;
PROCEDURE SUBSCRIBER_INS_SS (
SOURCE_SYS_ID IN VARCHAR2,
TRACKING_ID IN VARCHAR2,
ACCOUNT_NO IN VARCHAR2,
prepaidActDevDetails_tab IN prepaidActDeviceDetails_tabobj,
ERROR_CODE OUT VARCHAR2)
IS
Input_Parameter_Is_Null EXCEPTION;
PRAGMA EXCEPTION_INIT (Input_Parameter_Is_Null, -2000);
prepaidAccountDetails prepaid_act_dvc_details_obj
:= prepaid_act_dvc_details_obj (NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL);
STATUS VARCHAR2 (1) := '1';
cust_no VARCHAR (10);
m_mac_id VARCHAR2 (20);
channel_lineup VARCHAR2 (25);
LOB_VALUE VARCHAR2 (25);
subscriber_master_Rec subscriber_master%ROWTYPE := NULL;
Replico_device_info_det_Rec Replico_device_info_det%ROWTYPE := NULL;
flg NUMBER (1);
plan_code VARCHAR2(10);
subs_aact_no NUMBER(20);
m_plan_code1 payment_transaction_history.TH_PLAN_CODE%type;
m_payment_mode1 payment_transaction_history.TH_PAYMENT_MODE%type;
pm_phone_no_cur subscriber_master.pm_phone_no%type;
pm_status_cur subscriber_master.pm_status%type;
pm_user2_cur subscriber_master.pm_user2%type;
pm_user9_cur subscriber_master.pm_user9%type;
pm_cust_no_cur subscriber_master.pm_cust_no%type;
pm_cust_1 subscriber_master.pm_cust_no%type;
cm_i customer_master.cm_status%type;
CURSOR subs_rec is select pm_cust_no, pm_phone_no, pm_status, pm_user2, pm_user9 from subscriber_master
where pm_cust_no = cust_no and pm_status= 'S';
BEGIN
IF ( Source_Sys_Id IS NULL
OR Tracking_Id IS NULL
OR ACCOUNT_NO IS NULL
OR prepaidActDevDetails_tab.LAST = 0)
THEN
RAISE Input_Parameter_Is_Null;
END IF;
BEGIN
SELECT cm_cust_no
INTO cust_no
FROM customer_master
WHERE cm_cust_id = ACCOUNT_NO AND cm_status IN ('A', 'P', '0');
EXCEPTION
WHEN NO_DATA_FOUND
THEN
ERROR_CODE := 'SI001';
log_error ('SI001',
SQLERRM,
'No Customer exist with Active or Pre Actiavted');
INSERT_WS_LOG (Source_Sys_Id,
'F',
Tracking_Id,
Account_No,
prepaidAccountDetails.Mac_Id);
STATUS := '0';
END;
BEGIN
FOR i IN prepaidActDevDetails_tab.FIRST ..
(prepaidActDevDetails_tab.LAST)
LOOP
prepaidAccountDetails := prepaidActDevDetails_tab (i);
prepaidAccountDetails.Status_of_device := '1';
IF ( prepaidAccountDetails.Account_id IS NULL
OR prepaidAccountDetails.Mac_Id IS NULL
OR prepaidAccountDetails.LOB_value IS NULL)
THEN
RAISE Input_Parameter_Is_Null;
END IF;
IF (prepaidAccountDetails.LOB_value = 'VIDEO')
THEN
/* Commented as channel lineup is not coming from the input request */
/*IF(prepaidAccountDetails.Channel_Line_Up is NULL) THEN
Error_code :='SI002';
log_error ('SI002', SQLERRM, 'Channel line up is mandatory for Video');
INSERT_WS_LOG(Source_Sys_Id,'F',Tracking_Id,Account_No,prepaidAccountDetails.Mac_Id);
STATUS:=0;
prepaidAccountDetails.Status_of_device:='0';
END IF;*/
SELECT EC_CHANNEL_LINEUP
INTO channel_lineup
FROM ELIGIBLE_CUSTOMER
WHERE EC_CUSTOMER_NO = cust_no;
END IF;
BEGIN
SELECT 1
INTO flg
FROM subscriber_master
WHERE pm_phone_no = prepaidAccountDetails.Mac_Id
AND pm_status IN ('P', '0', 'A', 'B');
EXCEPTION
WHEN NO_DATA_FOUND
THEN
flg := 0;
END;
IF (flg = 1)
THEN
ERROR_CODE := 'SI003';
log_error ('SI003',
SQLERRM,
'Customer Already Exist with given Mac Id');
INSERT_WS_LOG (Source_Sys_Id,
'F',
Tracking_Id,
Account_No,
prepaidAccountDetails.Mac_Id);
STATUS := 0;
prepaidAccountDetails.Status_of_device := '0';
END IF;
BEGIN
SELECT md_mac_id
INTO m_mac_id
FROM mac_details
WHERE md_mac_id = prepaidAccountDetails.Mac_Id
AND md_start_date <= SYSDATE
AND md_status = 'A';
EXCEPTION
WHEN OTHERS
THEN
ERROR_CODE := 'SI004';
log_error ('SI004', SQLERRM, 'Invalid Mac Id');
INSERT_WS_LOG (Source_Sys_Id,
'F',
Tracking_Id,
Account_No,
prepaidAccountDetails.Mac_Id);
STATUS := 0;
prepaidAccountDetails.Status_of_device := '0';
END;
select pm_cust_no into pm_cust_1 from subscriber_master where pm_cust_no = cust_no;
IF (STATUS = 1 AND prepaidAccountDetails.Status_of_device = '1')
THEN
SELECT DECODE (prepaidAccountDetails.LOB_value,
'HSD', 'HSD',
'VIDEO', 'VDO')
INTO LOB_VALUE
FROM DUAL;
OPEN subs_rec;
LOOP
FETCH subs_rec into pm_cust_no_cur, pm_phone_no_cur, pm_status_cur, pm_user2_cur, pm_user9_cur;
IF subs_rec%FOUND THEN
IF
( pm_cust_1 = pm_cust_no_cur and pm_user2_cur= LOB_VALUE and pm_user9_cur = prepaidAccountDetails.outlet and pm_status_cur = 'S')
THEN
update subscriber_master set pm_phone_no = prepaidAccountDetails.Mac_Id, pm_status = 'P', pm_name = prepaidAccountDetails.Mac_Id
where pm_cust_no = pm_cust_no_cur and pm_user9 = prepaidAccountDetails.outlet;
select cm_status into cm_i from customer_master where cm_cust_no = pm_cust_no_cur;
IF( cm_i = '0')
THEN
update customer_master set cm_status = 'P' where cm_cust_no = pm_cust_no_cur;
END IF;
REPLICO_DEV_INFO( prepaidAccountDetails.Account_id, prepaidAccountDetails.Mac_Id,channel_lineup,
prepaidAccountDetails.LOB_value, prepaidAccountDetails.outlet, prepaidAccountDetails.kit_code,
prepaidAccountDetails.serial_Number, prepaidAccountDetails.shipper,prepaidAccountDetails.estimated_recived_date);
ELSIF
( pm_cust_1 = pm_cust_no_cur and pm_user2_cur= LOB_VALUE and pm_user9_cur = null and pm_status_cur = 'S')
THEN
update subscriber_master set pm_phone_no = prepaidAccountDetails.Mac_Id, pm_status = 'P', pm_name = prepaidAccountDetails.Mac_Id, pm_user9 = prepaidAccountDetails.outlet
where pm_cust_no = pm_cust_no_cur and pm_user9 = NULL;
update customer_master set cm_status = 'P' where cm_cust_no = pm_cust_no_cur;
REPLICO_DEV_INFO( prepaidAccountDetails.Account_id, prepaidAccountDetails.Mac_Id,channel_lineup,
prepaidAccountDetails.LOB_value, prepaidAccountDetails.outlet, prepaidAccountDetails.kit_code,
prepaidAccountDetails.serial_Number, prepaidAccountDetails.shipper,prepaidAccountDetails.estimated_recived_date);
END IF;
ELSIF subs_rec%NOTFOUND THEN
SELECT PM_SUBS_ACT_NO_SEQ.NEXTVAL
INTO subs_aact_no
FROM DUAL;
subscriber_master_rec.PM_SUBS_ACT_NO := subs_aact_no;
subscriber_master_Rec.pm_phone_no :=
prepaidAccountDetails.Mac_Id;
subscriber_master_Rec.pm_open_date := SYSDATE;
subscriber_master_rec.pm_status := 'P';
subscriber_master_rec.PM_CUST_LVL_YN := 'S';
subscriber_master_rec.PM_EQUP_CODE := LOB_VALUE;
subscriber_master_rec.PM_HOME_AREA := 'HOM';
subscriber_master_rec.PM_USG_CODE := 'USG';
subscriber_master_rec.PM_NO_TYPE := 'S';
subscriber_master_rec.PM_TCG_CODE := 'DEF';
subscriber_master_rec.PM_APLN_DATE := SYSDATE;
subscriber_master_Rec.PM_NAME := prepaidAccountDetails.Mac_Id;
subscriber_master_Rec.PM_STAFF_id := '16';
subscriber_master_rec.PM_USER2 := LOB_VALUE;
subscriber_master_rec.PM_USER3 := channel_lineup;
subscriber_master_rec.pm_cust_no := cust_no;
subscriber_master_rec.PM_USER8 := 'Y';
INSERT INTO subscriber_master
VALUES subscriber_master_rec;
REPLICO_DEV_INFO( prepaidAccountDetails.Account_id, prepaidAccountDetails.Mac_Id,channel_lineup,
prepaidAccountDetails.LOB_value, prepaidAccountDetails.outlet, prepaidAccountDetails.kit_code,
prepaidAccountDetails.serial_Number, prepaidAccountDetails.shipper,prepaidAccountDetails.estimated_recived_date);
END IF;
END LOOP;
CLOSE subs_rec;
SELECT TH_PLAN_CODE,TH_PAYMENT_MODE
INTO m_plan_code1,m_payment_mode1
FROM PAYMENT_TRANSACTION_HISTORY
WHERE TH_CUSTOMER_NO = cust_no
AND TH_LOB = LOB_VALUE
AND TH_SUBSCRIBER_NO IS NULL;
IF(LOB_VALUE = 'HSD') THEN
IF(m_plan_code1 = 'SIKI') THEN
plan_code := 'SIKI';
ELSE
plan_code := 'KIT';
END IF;
ELSE
IF(m_plan_code1 = 'SIKT') THEN
plan_code := 'SIKT';
ELSE
plan_code := 'TV';
END IF;
END IF;
UPDATE PAYMENT_TRANSACTION_HISTORY SET TH_SUBSCRIBER_NO = subs_aact_no, th_writeback_status = 'Y' WHERE TH_CUSTOMER_NO = cust_no AND TH_PLAN_CODE = plan_code;
COMMIT;
END IF;
END LOOP;
END;
END SUBSCRIBER_INS_SS;
END SUBS_INS_API_SS;
--- type object
create or replace
TYPE prepaid_act_dvc_details_obj--prepaidAccountDeviceDetailsObj
AS OBJECT ( Account_id VARCHAR2 ( 25 )
, Mac_Id VARCHAR2 ( 25 )
, Channel_Line_Up VARCHAR2 ( 25 )
, LOB_value VARCHAR2 ( 25 )
, Status_of_device VARCHAR2 ( 25 )
, outlet VARCHAR2(25)
, kit_code VARCHAR2(25)
, serial_Number VARCHAR2(25)
, shipper VARCHAR2(25)
, estimated_recived_date date )
type---
create or replace
TYPE prepaidActDeviceDetails_tabobj as table of prepaid_act_dvc_details_obj
---- i need to run this package via separate procedure. but i don't know how to pass the variable. because the passing argument contain object tab variable. please help me.. give me suggestion or procedure to run this pkg. -
"iCal got an error: Can't Make id of event of calendar 4 into type referen
Hello everyone. i am completely new to MAC's and very new to scripting. Thanks in advance for any help.
I am tying to run an Apple Script that is called Scheduled Delivery.
I'm running 10.4.10 and have the most recent version of the script.
Basically what happens is I type up and email, add in the email address and save it to my drafts folder. The Scheduled Deliver script, when run, finds all the emails in my drafts folder and uses iCal to schedule a time to mail them (which is a specific time I enter)
Here is my process I go through-
I run the apple script by double clicking on the Scheduled deliver Icon, which was in my appications/MailScript folder. It brings up a new window with all my saved drafts. I select the draft I want to schedule a specific time to deliver. This is great.
When I click on the lower right button "Update Schedule" I get an error message...
"iCal got an error: Can't Make id of event of calendar 4 into type reference. (-1700)"
I cannot figure this out. I've tried testing it anyway. I can close the Scheduled Deliver window but the "Done" button is always grey out. It seems to place an event in iCal but no message ever gets sent.
Any help is greatly appreciated.
ThanksAnyone? Any help is greatly appreciated.
-
I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch. I have done this numerous times, but today I got an error message saying the required file cannot be found. At the same time all of my photos on my iPod vanished. Can anyone help me?
Try deleting the photo cache from your computer and then re-try the photo sync - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
-
I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load in the edit Projects window. I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
I have contacted apple support and they tried to do a few things... to no available.
With my limited knowledge of file structures I assume that the header file must be corrupt.
Is there a 3rd party utility that can decompile and fix the file structure so it will load properly. I've been working on this project since june and would hate to have to redo the whole thing again.I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load in the edit Projects window. I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
I have contacted apple support and they tried to do a few things... to no available.
With my limited knowledge of file structures I assume that the header file must be corrupt.
Is there a 3rd party utility that can decompile and fix the file structure so it will load properly. I've been working on this project since june and would hate to have to redo the whole thing again. -
HELP! Was working perfectly now it is giving me this error and doesn't seem to be going past the printing option. Code is below.
main.scpt
set posixIdPath to "/Applications/Adobe InDesign CC/Adobe InDesign CC.app"
do shell script "/Users/cdapice/Desktop/cryptoquip/getquip.sh"
delay 8
tell application posixIdPath
activate
end tell
delay 8
set scripttoRun to ":Users:cdapice:Desktop:cryptoquip:Script.jsx" as alias
tell application "Adobe InDesign CC"
do script scripttoRun language javascript
end tell
delay 5
Adobe InDesign CC got an error: The property is not applicable in the current state." number 30615
Script.jsx
var myDocument = app.open(File("/Users/cdapice/Desktop/cryptoquip/NewCryptoquip.indt"), true);
//var myDocument = app.activeDocument;
var myPage = myDocument.pages.item(0);
var myTextFrame = myPage.textFrames.add();
//Place a text file in the text frame.
//Parameters for TextFrame.place():
//File as File object,
//[ShowingOptions as Boolean = False]
//You'll have to fill in your own file path.
myTextFrame.place(File("/Users/cdapice/Desktop/cryptoquip/quips.txt"));
//var myTextFrame = app.selection[0];
myTextFrame.parentStory.pointSize = 10;
var brkStory = myTextFrame.parentStory.contents;
var myPIs = myDocument.pageItems;
var destTextFrame = myPIs[6];
destTextFrame.parentStory.contents = brkStory;
firstChange();
myTextFrame.remove();
app.select(destTextFrame);
splitStory();
for (i = 0; i < myPIs.length; i++) {
if (myPIs[i].appliedObjectStyle.name == "puzzleBox") {
var newBoxStyle = myPIs[i].appliedObjectStyle;
secondChange(myPIs[i]);
myPIs[i].applyObjectStyle(newBoxStyle,true);
if(myPIs[i].appliedObjectStyle.name == "otherBox"){
var newBoxStyle = myPIs[i].appliedObjectStyle;
myPIs[i].applyObjectStyle(newBoxStyle,true);
Date.prototype.getMonthFormatted = function() {
var month = this.getMonth() + 1;
var formMonth = month < 10 ? '0' + month : month; // ('' + month) for string result
return formMonth.toString();
Date.prototype.getDayFormatted = function() {
var day = this.getDate();
var formDay = day < 10 ? '0' + day : day; // ('' + day) for string result
return formDay.toString();
var newdate = new Date();
var laterdate = new Date();
var dayofweek = newdate.getDay();
var offsetdays = 0;
switch(dayofweek) {
case 2:
offsetdays = 6;
break;
case 3:
offsetdays = 5;
break;
case 4:
offsetdays = 4;
break;
case 5:
offsetdays = 3;
break;
app.epsExportPreferences.appliedFlattenerPreset.convertAllStrokesToOutlines = true;
app.epsExportPreferences.appliedFlattenerPreset.convertAllTextToOutlines = true;
app.epsExportPreferences.appliedFlattenerPreset.rasterVectorBalance = 100;
//app.activeDocument.exportFile(ExportFormat.epsType, newFile, false);
for (i = 1; i < 7; i++) {
var curPage = i + "";
var x = i + (offsetdays - 1);
laterdate.setMonth(newdate.getMonth());
laterdate.setDate(newdate.getDate());
//alert(newdate);
//alert(x);
//alert(laterdate);
laterdate.setDate(newdate.getDate() + x);
//alert(laterdate);
var nameDate = laterdate.getMonthFormatted() + laterdate.getDayFormatted() + ".eps"
//alert(nameDate);
app.epsExportPreferences.pageRange = curPage;
var curFile = new File("/Users/cdapice/Desktop/cryptoquip/" + nameDate);
app.activeDocument.exportFile(ExportFormat.epsType, curFile, false);
var endDate = laterdate.getMonthFormatted() + laterdate.getDayFormatted();
var firstDate = new Date();
firstDate.setDate(newdate.getDate() + offsetdays);
var startDate = firstDate.getMonthFormatted() + firstDate.getDayFormatted();
var idFile = "cryptoquip_" + startDate + "_" + endDate + ".indd";
app.activeDocument.save(new File("/Users/cdapice/Desktop/cryptoquip/" + idFile));
with (app.activeDocument.printPreferences){
printer = "Advertising - Creative - Color Xerox";
copies = 1;
pageRange = "1-6";
paperSize = "US Letter";
paperHeight = "11 in";
paperWidth = "8.5 in";
printPageOrientation = PrintPageOrientation.landscape;
pagePosition = PagePositions.centered;
scaleHeight = 100;
scaleWidth = 100;
scaleMode = ScaleModes.scaleWidthHeight;
scaleProportional = true;
pageInformationMarks = true;
colorOutput = ColorOutputModes.COMPOSITE_CMYK;
app.activeDocument.print(false);
for(myCounter = app.documents.length; myCounter > 0; myCounter--){
app.documents.item(myCounter-1).close(SaveOptions.no);
function firstChange() {
app.findTextPreferences = NothingEnum.NOTHING;
app.changeTextPreferences = NothingEnum.NOTHING;
app.findChangeTextOptions.caseSensitive = false;
app.findTextPreferences.findWhat = "^t";
app.changeTextPreferences.changeTo = "";
myDocument.changeText();
app.findTextPreferences = NothingEnum.NOTHING;
app.changeTextPreferences = NothingEnum.NOTHING;
app.findTextPreferences.findWhat = "^p^p";
app.changeTextPreferences.changeTo = "^p";
myDocument.changeText();
app.findTextPreferences = NothingEnum.NOTHING;
app.changeTextPreferences = NothingEnum.NOTHING;
app.findTextPreferences.findWhat = "^p";
app.changeTextPreferences.changeTo = "^R";
myDocument.changeText();
app.findTextPreferences = NothingEnum.NOTHING;
app.changeTextPreferences = NothingEnum.NOTHING;
function secondChange(curFrame) {
app.findTextPreferences = NothingEnum.NOTHING;
app.changeTextPreferences = NothingEnum.NOTHING;
app.findChangeTextOptions.caseSensitive = false;
app.findTextPreferences.findWhat = " ";
app.changeTextPreferences.changeTo = "|";
curFrame.changeText();
app.findTextPreferences = NothingEnum.NOTHING;
app.changeTextPreferences = NothingEnum.NOTHING;
app.findTextPreferences.findWhat = " ";
app.changeTextPreferences.changeTo = "";
curFrame.changeText();
app.findTextPreferences = NothingEnum.NOTHING;
app.changeTextPreferences = NothingEnum.NOTHING;
app.findTextPreferences.findWhat = "|";
app.changeTextPreferences.changeTo = " ";
curFrame.changeText();
app.findTextPreferences = NothingEnum.NOTHING;
app.changeTextPreferences = NothingEnum.NOTHING;
function splitStory(){
//Make certain that user interaction (display of dialogs, etc.) is turned on.
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
if(app.documents.length != 0){
if(app.selection.length != 0){
//Get the first item in the selection.
var mySelection = app.selection[0];
//Process the selection. If text or a text frame is
//selected, do something; otherwise, do nothing.
switch(mySelection.constructor.name){
case "Text":
case "InsertionPoint":
case "Character":
case "Word":
case "Line":
case "TextStyleRange":
case "Paragraph":
case "TextColumn":
case "TextFrame":
//If the text frame is the only text frame in the story, do nothing.
if(mySelection.parentStory.textContainers.length > 1){
//Splitting the story is a two-step process: first, duplicate
//the text frames, second, delete the original text frames.
mySplitStory(mySelection.parentStory);
myRemoveFrames(mySelection.parentStory);
else{
alert("Please select a story containing more than one text frame and try again.");
break;
default:
alert("Please select some text or a text frame and try again.");
else{
alert("Please select some text or a text frame and try again.");
else{
alert("Please open a document and try again.");
function mySplitStory(myStory){
var myTextFrame;
//Duplicate each text frame in the story.
for(var myCounter = myStory.textContainers.length-1; myCounter >= 0; myCounter --){
myTextFrame = myStory.textContainers[myCounter];
myTextFrame.duplicate();
function myRemoveFrames(myStory){
//Remove each text frame in the story. Iterate backwards to avoid invalid references.
for(var myCounter = myStory.textContainers.length-1; myCounter >= 0; myCounter --){
myStory.textContainers[myCounter].remove();Hotfixes are special, out-of-band patches created to fix specific problems, so they are never published to Windows Update. Often the hotfix gets incorporated into a released patch that is published on Windows Update. If this hotfix was incorporated
into a released patch, and you applied that patch to your system, the hotfix would see that its files are older than the latest files on the system and would give you this message. Because the hotfix is not for general distribution, there is rarely documentation
saying that it has been superceded.
Generally there is a file list with a hotfix/patch that gives you the version number of the affected files. You can go through those files to see that you have the latest files. The problem is finding the actual patch that updated those files.
Without going through lots of patches, it is hard to find which patch made the hotfix obsolete.
.:|:.:|:. tim -
Hi,
I am working on SSRS 2008 R2.
My Colleague gave me one RDL. I have added it to my SSRS project on BIDS & Tried to Open by double-click on that RDL.
I got a popup error saying "Failed to open report 'reports_List.rdl'. clicked on
Details button & noticed error explanation as . "Invalid character in the given encoding. Line 1, position 1".
When i try to View Code of this RDL, I got another error message saying "Exception from HRESULT: 0x80041FEB"
Can anybody suggest me ... what exactly the root cause of it? how can i resolve it ?
thanks a lot in advance !
best regards,
VenkatHi Venkat,
Did you use Visual Studio 2010 on your test? It is a known issue of Visual Studio 2010. Please refer to the following document. It has fix method provided by the Microsoft Web Development Tools team to work around the issue.
https://connect.microsoft.com/VisualStudio/feedback/details/552134/hresult-error-creating-timetracking-sample-web-site-project
Since the issue related to Visual Studio. I suggestion you post the question in the following forum:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=Vsexpressvb
It is appropriate and more experts will assist you.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support
Maybe you are looking for
-
How do I move mail from an old server to a new server?
I am rebuilding my server. The new server runs on OS X 10.9.4 with Server 3.1.2. The old server ran OS X 10.9.x and Server 3.x (the exact versions are not known). Within the folder /Library/Server/Mail, I found the email stores for both systems. I h
-
102 error when updating iPhoto 9.4.3
Hi I keep getting a 102 error when trying to update to iPhoto to 9.4.3. Originally I was updating the OS to 10.8.5 in App store by using the top level Update button (the button which allows to you run all current Apple updates with one click). This r
-
What is the max number of recipients in an email list
Mail is rejecting my email because of too many recipients. What is the limit??
-
I tried to follow the documentation of the Print Service Admin to put a printer into OD. I can add a printer record in Workgroup Manager but then there is a step to add an attribute and choosing e.g. "PrinterLPRHost" from a list. Unfortunately that l
-
Problems with Requests in Weblogic 6.1
Hi, i am using weblogic in my project both as a webserver and as the application server. But i am facing problems with requests being sent to the server. Basically i have a form in my jsp which, if submitted by multiple clients at the same instant in