GP Preferences - computer configuration Preferences windows setting registry HKLM keys applying to HKCU

having issues applying HKLM|system|currentcontrolset|control|securityproviders|schannel keys using GPO
used the registry wizard to copy schannel keys into GPO preferences under computer configuration>preferences>registry
permissions set in computer configuration>policies>windows settings>registry
Keys get updated in HKCU registry path
User configuration in GPO is disabled.
No errors are recorded - all events say success in applying GPO

Hi,
Would you please describe the steps you configured the Registry GPP in detail so that I can try to reproduce and analyze the issue.
In addition, please also collect and upload the following log files to me
here for our further research.
Collect GPMC log
==============
On domain controller, click Start -> Run, type GPMC.MSC, it will load the GPMC console. If the GPMC snap-in is not installed.
Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please place appropriately). (Choose computer and select
the proper user in the wizard)
Right click the resulting group policy result and click the "Save Report…" => save report and upload it to the link I provided.
Collect gpresult output
==============
Run the command gpresult /v >C:\gpresult.txt.
Upload the C:\gpresult.txt to the above link.
Collect Gpsvc.log
==============
To collect the GPSVC.log, we need to modify the following registry:
Subkey: HKLM\Software\Microsoft\Windows NT\CurrentVersion\Diagnostics
Entry: GpSvcDebugLevel
Type: REG_DWORD
Vaule data: 0x30002
After the issue reoccurs, find and upload %windir%\Debug\UserMode\Gpsvc.log file.
Regards,
Arthur Li
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
Arthur Li
TechNet Community Support

Similar Messages

GPO Run these programs at user logon not taking effect when configured in Computer Configuration section

[EDIT 20140207]:
I found that the default domain policy sets "run these programs at user logon" and (other than I expected) not BOTH GPO settings become active, but the setting from the default domain policy overrides the setting from my new GPO. So I think I have
found the answer myself.
When on our W2k8-R2 DC I create a new GPO and configure
"Computer Configuration/Policies/Windows Settings/Administrative Templates/System/Logon/run these programs at user logon" to "c:\windows\system32\notepad.exe" (just for testing) it won't take effect on Win 7 SP1, no matter what the Security
Filtering options are.
It seems other settings (in the very same GPO) become active but "run these programs at user login" from the computer policies section doesn't. I configure the very same setting in the section "user policies" instead and add "Authenticated
Users" to Security Filtering, the program will be started. But that's not what I need.
I can reproduce the issue, here are the exact steps:
create a new group "group-a" for later security filtering
create a new GPO
in the new GPO set "Computer Configuration/Policies/Windows Settings/Administrative Templates/System/Logon/run these programs at user logon" to "c:\windows\system32\notepad.exe"
for setting the scope remove "authenticated users" from Security Filtering and add "group-a" instead
link the GPO to the domain root
make "test computer" a member of "group-a"
on "test computer" run "gpupdate /force", reboot, log in
Issue: notepad is not being started.
What I'm aiming for is obvious: Depending on the membership of group-a I want to configure certain programs that should be started whenever a user logs in.
gpresult /R returns that it would be applying the GPO. (It actually is but the setting "run these programs at user login" is not being applied.)
For debugging I started MMC / RSoP on one of the machines on which the GPO should have been applied and found that "run these programs at user login" is not set (which seems to be the reason why the GPO won't work on the machines).
Searching the web I found similar reports
[1] [2] but no solution was found and the user used a workaround instead.
If I change the GPO so that I use the very same setting in "user configuration" instead of "computer configuration" it works as long as I add "authenticated users" to the Security Filtering. But then the GPO is applied to all users
and not only to the ones using computers which are members of group-a. According to this howto [3] I should not remove "authenticated users" but alter the security setting instead. However, the howto seems to be aimed ad w2k3 and using Win2k8 I cannot
find security settings "apply" for "authenticated users" so I cannot remove that setting, there's only "read" or "read and modify".
So two questions:
1. Why doesn't it work when using "computer settings"
2. What about that Security Filtering with removing "authenticated users" and using group-a instead?
T.
[1] http://social.technet.microsoft.com/Forums/windows/en-US/0e280490-fba6-4ced-aba5-ae49c60e44bd/computer-gpo-run-these-programs-at-user-logon-not-working-as-intended-on-win7-clients?forum=w7itproinstall
[2] http://social.technet.microsoft.com/Forums/windows/en-US/8cb78bf8-33ec-461e-8604-32d82d016685/run-these-programs-at-user-logon?forum=winserverGP
[3] http://www.grouppolicy.biz/2010/05/how-to-apply-a-group-policy-object-to-individual-users-or-computer/

Hi,
sounds like you find the answer already.
If you have any further question, please feel free to let me know.
Have a nice day!
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

RDS 2012 R2 - How do I lockdown access to Local Computer Management and Windows Backup via Group Policy

Greetings all,
I am needing assistance in how to lockdown access to Local Computer Management and Windows Backup via Group Policy for users that access RDS service. I have followed this awesome guide - h t t p://w w w.it.ltsoy.com/windows/lock-down-remote-desktop-services-server-2012/
- but it is missing two important resources that I would like to lock down.Currently, I have successfully locked down Control Panel for users via Group Policy, but I cannot find any group policy or guide on how to restrict user access
to Computer Management (different to Server Manager). When using Win-X shortcut to open the 'Administrator's shortcuts' near the windows icon, I have locked down everything except Computer Management. Computer Management gives direct access to Disk Management,
Shares etc, which are locked down for users. But Windows Server Backup is still accessible. Can someone please guide me on how to restrict access to both Computer Management and Windows Server Backup.
Thanks in advance.
Terry.

Prevent running of Windows Server Backup
Computer Configuration\Policies\Windows Settings\Security Settings\File System
Right click on File System - Add File - Drill down to \System32\wbadmin.msc
On the Database Security ACL that pops up - Remove Creator Owner, Remove Users and check Adminstrators have Full Access.
On the Object window - choose Propagate inheritable permissions to all... (Default)

WIndows 7 and Server2008 machines will not remember network discovery preferences, requires setting every start up or wake up.

hello
I wondered if anybody here could be so kind as to help me solve this situation
i have two Windows 7 machines and Server2008 machines will not remember network discovery preferences,
i am running software on the windows server machine that collects data and serves information to two windows 7 machines, and network discovery is required for this purpose
these machines are configured in a local stand alone network configured as a workgroup the only other items on network are none PC based equipment that the server happily communicates with and reads data from
once the network discovery is set for the network the system runs as expected but on every start-up (or wake up) the network discovery is lost and need to be re allowed. this is the case in both windows server 20008 r2 and windows 7
how do i make these preferences permanent. so that it will restart and re establish communication its self without intervention
am i missing a setting or if not is there a way i can script the the selection of preference on each start(/wake)up.
the final user need to be able to turn system on/restart and use it with out having to have any IT/networking knowledge to get system running.
thank you for taking the time to read my query

You can use group policy to enable network discovery so that it is always configured
1. In the Group Policy editor on a Win7 or Windows Server 2008 R2 computer, open the GPO that you want
to use in the Group Policy Editor.
2. Expand "Computer Configuration", "Windows Settings", "Security Settings", "Windows Firewall with Advanced
Security", and then "Windows Firewall with Advanced Security - {policy you have open}".
3 Right-click "Inbound Rules", and then click "New Rule".
4 In the Rule Wizard, on the Rule Type page, select"Predefined", and then select Network Discovery from
the list. Click Next.
5 On the Predefined Rules page, ensure that the check box is on each rule that is part of the Network
Discovery group, and then click Next.
6 On the Action page, select "Allow the Connection", and then click Finish.

I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen. The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

Open PDF in same browser when the preference is set to open in new window.

The corporate policy for all applications is to open the PDF document in new browser/reader but our application needs the reader to open in the same browser even the preference "Display PDF in Browser" is unchecked.... The setPreference from javascript (html) doesn't seemed to work... How do i make this work?
Also, I need the links the browser to open in new browser once the PDF is loaded... do I need to reset the preference once it is loaded for the links to open in new browser?
thanks,
- Ray

There is no way to override that from your application. And if the Links in the PDF have an explicit "open in new window" setting, that is respected over the preference.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 19 Oct 2011 22:02:53 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Open PDF in same browser when the preference is set to open in new window.
Open PDF in same browser when the preference is set to open in new window.
created by h_ray<http://forums.adobe.com/people/h_ray> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3981167#3981167

I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

What operating system are you using? Is it on a Mac or a PC? Which preferences are set for external mic/headphones, Audition's or the computers?

My system preferences sound setting window keeps popping up.

We have two MacBook Pro 2008 computers and the System Preference Sound Setting are popping up while we're in other programs including Word and Chrome. As quickly as I close the window it is popping up again. If I click out of it and back into the program I'm working in it will pop me back out to System Preferences with the Sound Settings. We tried restarting the computers and it still happens. Any thoughts?

We were able to figure this out. We moved our bluetooth printer to a new room. It sends constant signals to pair up. We went into our bluetooth settings and selected advanced and unchecked the boxes. That was it.

My UI preferences are set to identical settings in Illustrator and InDesign, why don't they look the same?

My UI preferences are set to identical settings in Illustrator and InDesign ("scale to lower supported scale factor") and AI looks perfect, ID is too big. Why don't they look the same if the settings are the same? Driving me CRAZY. I have my windows scaling factor at 124% and it needs to stay enlarged, otherwise nothing else on my system will be readable. The inconsistency of the workspaces is so annoying.

Hello billwoodard11,
Thanks for the question. If your computer is not compatible with HD 1080p content, you should receive a prompt stating so - but should still be able to download the content for use on other devices. For more information, check out this resource:
Purchasing and viewing HD videos in iTunes - Apple Support
http://support.apple.com/en-us/HT201850
How to purchase, download, or view HD 1080p content
iTunes 10.6 by default is set to purchase, download, and playback HD content in 720p. You must change your local preference setting if you prefer to download, purchase, and playback HD content in 1080p. Depending on your computer's hardware configurations, you may be unable to purchase, rent, or playback content in 1080p. iTunes may display the following dialog:
On Mac or PC
Download the latest version of iTunes. You can download iTunes for free.
From the iTunes menu, choose iTunes > Preferences > Store (for PC, choose Edit > Preferences > Store).
Next to "When downloading High Definition videos, prefer:" set your preference to 1080p1.
Click OK. Now, when you purchase or download HD content, your computer will always download in 1080p, when available.
Depending on your computer's hardware limitations, you may be unable to purchase, rent, or view HD content from the iTunes Store. If you are trying to view HD video on an external display, the display must have a digital connection (DVI, DisplayPort, or HDMI) and support HDCP.
Check out the following resource for information on downloading past purchases, including information on playing purchases on Apple TV:
Download past purchases - Apple Support
http://support.apple.com/en-us/HT2519
Thanks,
Matt M.

Blank white System Preferences window

Hello all,
I purchased a secondhand G5 for the purpose of having a second internet station at home (I do most of my work on a late 2008 MBP but we've got multiple people here who like to use the Internet at the same time). When I set up this computer, it was hooked up to an old flat screen monitor (bought when they first came out) the HD was wiped clean, Leopard was installed, the internet was set up and working and everything seemed good to go. However, I wanted to get into the system to change the monitor resolution setting since the type/icons were a little big for my taste.
When I pulled up System Preferences, I got a completely blank white window. This happens every time System Prefs is launched. I can click on this window where normally icons would be, and things seem to happen (the window changes size) but it remains completely white. Moreover, all of the pulldown menus from the top menu bar also are blank white. I can move my mouse down in the File menu where Quit would normally be, and I can click on it and System Preferences quits. If I quit out of System Prefs, the Finder and other software windows act normally. When I log into System Prefs again, same blank white window, same problem.
This blank white window thing also happens with Preview, but I have not noticed it with any other programs on the system (yet).
Here's what I've done to troubleshoot:
Discarded appropriate systempreferences.plist file in the User>Library>Preferences window, also appropriate file in User>Library>Caches. Emptied trash and rebooted. Same problem.
Reinstalled Leopard, 10.5. Tested, same problem. Upgraded with combo pack to 10.5.8, tested, same problem.
Swapped out video card for a known working video card, tested, same problem.
Swapped monitor for known working new monitor, tested, same problem.
Am I missing some other .plist or similar file that should be discarded? Has anyone experienced anything like this and been able to solve it? Would this be due to software issues, or some kind of hardware issue? Because I can't see System Preferences, I can't create a new user account and discard the old one to try and resolve any software issues, my only choice is to do a clean install (which I have done to no avail).
Help? I'd appreciate any guidance. Thanks in advance.
Raji

Well, at least we are seeing some light here. I forgot about Safe Mode! When I started up into that, I can see the System Preferences windows just fine... it's no longer white, and I can select what I need and make changes.
However, I have done permissions repair from every possible angle (both from HD and DVD), I have reset the PRAM, and I still get a blank Sys Prefs window on normal startup.
The only thing suggested here I have not tried is replacing the PRAM battery (since at the moment, I don't have one). That will be the next angle of attack but I'll have to wait to get one in.
Other than the battery, could this be some kind of peripheral or software conflict?
This is bugging me! I mean really.... it's just an Internet station, but one does want things to work properly nonetheless!
Thanks for the help so far.... ! It has been useful.

External harddrive not recognised preferences are set up good

HI can someone please help me ??
I have an MAcbook pro:
Processor 2,6 GHz Intel Core i7
Memory 8 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000
Software OS X 10.9.3 (13D65)
I have an external hardrive and I could always move, change files too it. But as of today it wont show up anywhere. Not in the sidbar and not on my desktop.
All finder preferences are set up well. The harddrive does show up on my moms computer (windows, ugh) An small usb stick does show up, it also recognises my Canon5d mark II. But the hardrive will not appear. PLEase help me...im getting frustrated as i cant make this work. Im abroad frm my own country and really have to make this work as i store my photo's to my drive..... I dont have an 2nd hardrive as my mac and this hardrive are at my holiday adress the redundancy.
I hope you know what software i have....as i just copy past this from my info (aboutthis mac) not sure mavericks or mountain lion
Thanks in advance much appreciated

HI sorry thats what I ment. The disk utility(application) in the folder utilities. The strange thing is that Yesterday the hard drive did apear there. I thought maybe it has something to do with NTFS application. As before I had installed this I could only read but notwrite to files on the hard disks. So I uninstalled and reinstalled the software,,,,,now the hard disk does not appear anymore in disk utilities .....I'm getting futher away from an solution .... :-( what can this be ? ever heard of an problem like this ? I thank you in advance for taking your time to look into this problem.
Regards,
Terrence
see both screeshot. Only the usb stick appears. and see preferences also

Creating a preferences window

Hi
I wonder if there is any way to create in Director a
preferences window (see example below).
http://www.guide.lancs.ac.uk/tellguidemyname.html
In particular what i would like to do is to allow my users to
select the things they want to select from the preferences window
and then when press save to get the appropriate movie.
If the user selects the language of the system to be English
then play movie English otherwise
if the user selects the language of the system to be Greek
then play Greek movie
and
If the user selects architecture + maritime related
information to play movie A (that contains the relevant content)
otherwise if the user selects History and architecture then
play movie B (that contains the relevant content)
I would also like to record the preferences selected in some
kind of text file that would tell what the user selected. Is there
any way to do that?
All ideas will be appriciated
Many thanks

I don’t have a simple dir I can post but Buddy
API’s help file has some code snippets that make good
examples. If you have trouble getting started let me know. What I
can post are some examples of how to use my scripts to code the ini
data, keep in mind that you only need to code the data if you are
allowing the users to type text strings to be stored in the ini
file, if all of your data is generated by lingo you can make sure
the data is ini safe yourself without having to code it first.
First the scripts, copy and save in a movie script cast
member:
on codeIniData cMode, iniString
case cMode of
"read" :
iniString = replaceField(iniString,"¬","=")
iniString = replaceField(iniString,"¶",RETURN)
iniString = replaceField(iniString,"µ",";")
iniString = replaceField(iniString,"§","#")
iniString = replaceField(iniString,"«","[")
iniString = replaceField(iniString,"»","]")
"write" :
iniString = replaceField(iniString,"=","¬")
iniString = replaceField(iniString,RETURN,"¶")
iniString = replaceField(iniString,numToChar(10),"¶")
iniString = replaceField(iniString,";","µ")
iniString = replaceField(iniString,"#","§")
iniString = replaceField(iniString,"[","«")
iniString = replaceField(iniString,"]","»")
otherwise : alert "Unknown mode in codeIniData."
end case
return iniString
end
on replaceField input, stringToFind, stringToInsert
output = ""
findLen = stringToFind.length - 1
repeat while input contains stringToFind
currOffset = offset(stringToFind, input)
output = output & input.char [1..currOffset]
delete the last char of output
output = output & stringToInsert
delete input.char [1.. (currOffset + findLen)]
end repeat
set output = output & input
return output
end
OK, lets say you create the following ini file using notepad
and save it with the name “foodPrefs.ini” in the same
folder as your dir movie:
[breakfast]
sue=coffee
bill=bagel
tom=eggs
[lunch]
sue=Chicken McNuggets
bill=Quarter Pounder with cheese
tom=Fries
If you want to read Bill’s lunch preference into
Director simply use the following:
myIniPath = _movie.path & " foodPrefs.ini"
billsLunch =
codeIniData("read",baReadIni("lunch","bill","Error",myIniPath))
if billsLunch = "Error" then alert "Error reading settings
file."
If you have an editable text cast member with the name
"suesBreakfast" and ask sue to type her breakfast order, to save
that order do the following:
myIniPath = _movie.path & " foodPrefs.ini"
suesOrder = codeIniData("write",member("suesBreakfast").text)
resultCode =
baWriteIni("breakfast","sue",suesOrder,myIniPath)
if not resultCode then alert "Error writing settings file."
The most common reason for getting the alert when reading or
writing to the ini file is either an error in your path or having
the ini file open in notepad at the same time Buddy API is trying
to access it. For best results quit notepad before testing.
Storing the contents of an editable text cast member is an
example of why you want to code the ini data. It is possible,
although unlikely, that the user will type characters that have
special meaning in an ini file, I simply temporarily replace those
characters with others that are impossible to type (well, not
really impossible, but very unlikely).
If you are curious, numToChar(10) is the linefeed character
which I replace with a standard RETURN. The most likely reason to
encounter a LF is because the user copied and pasted the text from
another source. Director doesn’t display LF’s in
strings, so replacing it with a RETURN keeps the formatting looking
like the original.

PS CC 2014 Actions launch Preferences Window

I've been using Photoshop Actions for years but recently I've encountered some odd behavior. I made a simple action that removes transparency from a document by executing the Trim command. The last part of the action then saves the changes and closes the PSD file. It worked great until today.
Here are the steps I'm performing:
While I'm in Bridge, I select all my files in the current folder, I initiate this Action from Tools \ Photoshop \ Batch. This switches me over to PS with the Batch window open. From there, I can choose the action from the drop down list and run it.
The action runs its course on the selected files with no issues the first time around.
However, if I try to run the action again on files in a different folder (from Bridge), I keep getting the Preferences Units & Rulers window launches each time the file loads. I have to sit there and press the Escape key each time in order for the action to complete.
I tried to duplicate the behavior by stepping through the Action manually in order to pinpoint which step is the culprit, but the Preferences window doesn't load. It only does it when the Action runs on its own.
Anyone know why this would happen?

If you create an action set with just the one action and save the set upload the uploade it to the web and post a link to the .atn file we can download the action and test that on our machines. You will get feedback from both Mac and PC users. It sound odd that it would work once then fail the second time. Was Photoshop CC 2014 up before you used bridge menu tools>photoshop>batch the first time or was Photoshop started because you used tools>photoshop>batch. If is was not up did you try closing PS down before the second batch?

Running Batch Actions in Bridge causes PS's Preferences window to open repeatedly

I just upgraded to CC at work, and ever since I've had a problem when I batch run Photoshop Actions from Bridge.
I have some simple Actions set up in PS to do some conversions for large batches of images (convert to RGB, resize, change DPI, etc.). But when I run them from Bridge like I always have, it causes Photoshop to open the Preferences window to the "Units & Rulers" tab. And that, unfortunately, pauses the batch conversion until I close the Preferences window. This happens at least once per file, but usually twice. Pretty annoying.
I never had this problem when I was using CS6, but just in case there was some sort of incompatibility with my old Actions, I remade one of them in CC, but the Preferences window still pops up.
This only happens when I run Batch Actions from Bridge. When I run the Action on a single file from PS, it works fine.
Any ideas? Maybe I've found a new bug?
Thanks!

BTW, I was able to get around this problem by opening all the files I wanted to run the Action on using Bridge, then manually triggering the Batch dialog via Photoshop and using the 'Source: Opened Files' option:
Using this system, I didn't get any errors. Luckily, I also didn't have a huge number of files. If I did, I'd probably have to copy them all into a temp folder using Bridge, then run using 'Source: Folder'. Definitely a pain when they are all right there in Bridge ready to be batched.

How to access Preferences window in HP ePrint Mobile

I Ihave a new HP All In One wireless desktop with Windows 8, and a HP Officejet 6700 printer. When I tried to print an email, the ePrint icon appeared, so I clicked on it and was asked for a PIN - I followed the prompts, got my pin, now I don't know how to get back to ePrint and the Preferences window? When I enter my PIN, will I get instructions to print my email?
Thanks.

Here is some general information on the printer and the ePrint services. Simply put, once you set up the printer, enabled web services, and registered the printer on the website using the PIN you should also have set up the printer with a unique email address. With this email address you can send whatever you would like (with some limitations) through your email to your printer's address and it should print out with some immediacy.
Here is some other useful information on the ePrint service :
https://h30495.www3.hp.com/help
Let me know if there is more information that I can gather for you!
Have a wonderful day!
-Spencer

GP Preferences - computer configuration Preferences windows setting registry HKLM keys applying to HKCU

Similar Messages

Maybe you are looking for