Error installing IDS: ABAP Process of Instance IDS/DVEBMGS00 (ABAP:UNKNOWN) did not start after 10 minutes
Hi All,
Im installing EHP6 on windows server 2008 r2 (VM ware 10). After getting past my initial problems, im stuck on step 21/29.
Create Instance. Im getting the attached error.
I can make out from this file that it is network related issue, but cannot find a solution to this. Can anybody please help me out?
Here are my trace files :
1. dev_disp:
trc file: "dev_disp", trc level: 1, release: "720"
sysno 00
sid IDS
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 100
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\VINEETABAP\sapmnt\IDS\SYS\profile\IDS_DVEBMGS00_VINEETABAP
pid 4508
kernel runs with dp version 131000(ext=118000) (@(#) DPLIB-INT-VERSION-131000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4508) [dpxxdisp.c 1287]
shared lib "dw_xml.dll" version 100 successfully loaded
shared lib "dw_xtc.dll" version 100 successfully loaded
shared lib "dw_stl.dll" version 100 successfully loaded
shared lib "dw_gui.dll" version 100 successfully loaded
shared lib "dw_mdm.dll" version 100 successfully loaded
shared lib "dw_rndrt.dll" version 100 successfully loaded
shared lib "dw_abp.dll" version 100 successfully loaded
shared lib "dw_sym.dll" version 100 successfully loaded
shared lib "dw_aci.dll" version 100 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Sun Aug 24 11:27:37 2014
*** ERROR => NiHLGetHostName: NiPGetHostByAddr failed (rc=-1) [nixxhl.cpp 495]
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 6 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6404]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >VINEETABAP_IDS_00 <
DpShMCreate: sizeof(wp_adm) 43024 (2264)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
DpShMCreate: sizeof(comm_adm) 584080 (1144)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2152)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F7D0050, size: 6368736)
DpShMCreate: allocated sys_adm at 000000000F7D0060
DpShMCreate: allocated wp_adm_list at 000000000F7D3040
DpShMCreate: allocated wp_adm at 000000000F7D3230
DpShMCreate: allocated tm_adm_list at 000000000F7DDA50
DpShMCreate: allocated tm_adm at 000000000F7DDAA0
DpShMCreate: allocated wp_ca_adm at 000000000FD209B0
DpShMCreate: allocated appc_ca_adm at 000000000FD303C0
DpShMCreate: allocated comm_adm at 000000000FD3FDD0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000FDCE770
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 000000000FDCE820
DpShMCreate: allocated j2ee_adm at 000000000FDCE860
DpShMCreate: allocated ca_info at 000000000FDCF7E0
DpShMCreate: allocated wall_adm at 000000000FDCF870
DpCommAttachTable: attached comm table (header=000000000FD3FDD0/ft=000000000FD3FDE0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (10 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 2047MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 2048MB
Sun Aug 24 11:27:38 2014
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c 1673]
Sun Aug 24 11:27:43 2014
*** ERROR => MsIAttachEx: NiBufConnect to VINEETABAP/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1774]
Sun Aug 24 11:27:58 2014
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Sun Aug 24 11:27:59 2014
CCMS: Initalized shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
Sun Aug 24 11:28:00 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
Sun Aug 24 11:28:37 2014
*** ERROR => MsIAttachEx: NiBufConnect to VINEETABAP/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
*** ERROR => DpHdlDeadWp: W0 (pid 5580) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W1 (pid 5328) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W2 (pid 4940) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W3 (pid 5824) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W4 (pid 2700) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W5 (pid 4052) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W6 (pid 5148) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W7 (pid 5932) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W8 (pid 4540) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W9 (pid 5616) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W10 (pid 3076) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W11 (pid 4592) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W12 (pid 164) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W13 (pid 1988) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W14 (pid 5400) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W15 (pid 5916) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W16 (pid 5464) died (severity=0, status=0) [dpxxwp.c 1522]
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:47 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sun Aug 24 05:58:47 2014
========================
No Type Pid Status Cause Start Rstr Err Sem Time Program Cl User Action Table
0 DIA -1 Ended no no 1 0 0 NO_ACTION
1 DIA -1 Ended no no 1 0 0 NO_ACTION
2 DIA -1 Ended no no 1 0 0 NO_ACTION
3 DIA -1 Ended no no 1 0 0 NO_ACTION
4 DIA -1 Ended no no 1 0 0 NO_ACTION
5 DIA -1 Ended no no 1 0 0 NO_ACTION
6 DIA -1 Ended no no 1 0 0 NO_ACTION
7 DIA -1 Ended no no 1 0 0 NO_ACTION
8 DIA -1 Ended no no 1 0 0 NO_ACTION
9 DIA -1 Ended no no 1 0 0 NO_ACTION
10 UPD -1 Ended no no 1 0 0 NO_ACTION
11 ENQ -1 Ended no no 1 0 0 NO_ACTION
12 BTC -1 Ended no no 1 0 0 NO_ACTION
13 BTC -1 Ended no no 1 0 0 NO_ACTION
14 BTC -1 Ended no no 1 0 0 NO_ACTION
15 SPO -1 Ended no no 1 0 0 NO_ACTION
16 UP2 -1 Ended no no 1 0 0 NO_ACTION
Dispatcher Queue Statistics Sun Aug 24 05:58:47 2014
===========================
+------+--------+--------+--------+------------+------------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+------------+------------+
| NOWP | 0 | 2 | 2000 | 5 | 5 |
+------+--------+--------+--------+------------+------------+
| DIA | 2 | 2 | 2000 | 2 | 0 |
+------+--------+--------+--------+------------+------------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
max_rq_id 5
wake_evt_udp_now 0
wake events total 5, udp 4 ( 80%), shm 1 ( 20%)
since last update total 5, udp 4 ( 80%), shm 1 ( 20%)
DpGetLoadAverage: la1[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[1] = 0.011111 / -1.000000 %
Dispatcher Load Statistics
+------+---------+---------+---------+
| Typ | LA1 | LA5 | LA15 |
+------+---------+---------+---------+
| DIA | 0.000 | 0.000 | 0.011 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[2] = 0.000000 / -1.000000 %
| UPD | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[3] = 0.000000 / -1.000000 %
| ENQ | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[4] = 0.000000 / -1.000000 %
| BTC | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[5] = 0.000000 / -1.000000 %
| SPO | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[6] = 0.000000 / -1.000000 %
| UP2 | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
Dump of tm_adm structure: Sun Aug 24 05:58:47 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T19, U20, , , 11:28:00, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Sun Aug 24 05:58:47 2014
=============================
Slots: 1000, Used: 0, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:52 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >VINEETABAP_IDS_00 < (normal)
DpJ2eeDisableRestart
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: stop gateway
killing process (1192) (SOFT_KILL)
*** ERROR => DpProcKill: kill failed [dpntdisp.c 397]
DpHalt: stop icman
killing process (4164) (SOFT_KILL)
DpHalt: terminate gui connections
send SHUTDOWN to REM TM 19
DpWpBlksLow: wp_blks_in_queue/limit/max = 0/800/1000
DpLockWpBlkEx: my wp blk start index is 0
DpLockWpBlkEx: lock wp ca_blk 0
return errno (-17) to T19
DpTmSend: errormsg without overhead: use mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
DpTmSend: try to send 14 bytes to T19/M0
NiBufSend starting
NiIWrite: hdl 18 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 0
set status of T19 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 18 in set0
SiSelNSet: set events of sock 428 to: ---
NiBufISelRemove: remove hdl 18 from set0
SiSelNRemove: removed sock 428 (pos=2)
SiSelNRemove: removed sock 428
NiSelIRemove: removed hdl 18
DpDelSocketInfo: del info for nihdl 18 (pos/type=2/3)
NiICloseHandle: shutdown and close hdl 18/sock 428
NiBufIClose: clear extension for hdl 18
dp_tm_adm[19].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1408859932/146000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 19
DpListRemove: remove elem 19 from tmadm_inuse_list
DpListRemove: 19 elems in tmadm_inuse_list
DpListInsert: insert elem 19 into tmadm_free_list (at begin)
DpListInsert: 182 elems in tmadm_free_list
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
*** ERROR => [DpProcDied] Process died (PID:1192 HANDLE:1124 rc:0x1) [dpnttool2.c 147]
DpHalt: wait for end of icman
[DpProcDied] Process lives (PID:4164 HANDLE:1132)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:53 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4164 HANDLE:1132)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:54 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4164 HANDLE:1132)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:55 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4164 HANDLE:1132)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:56 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4164 HANDLE:1132)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:57 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4164 HANDLE:1132)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:58 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4164 HANDLE:1132)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:59 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4164 HANDLE:1132)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:29:00 2014
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:4164 HANDLE:1132 rc:0x0) [dpnttool2.c 147]
DpHalt: not attached to the message server
DpHalt: cleanup EM
EsCleanup( )
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4508) [dpxxdisp.c 11252]
DpHalt: Good Bye .....
I have a feeling you might have better luck posting this in the BASIS forum and not ABAP.
Similar Messages
-
CJS-30149 ABAP processes of instance ISP/DVEBMGS00 [ABAP: UNKNOWN] did not
Hi All,
I'm installing ECC6 sr3 on DB2.My OS is Win2003 Ent Edition.The installation is on a cluster.While installing SAP i'm facing a error at phase 47 which states CJS-30149 ABAP processes of instance ISP/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:00 Mins Giving up.I've provided the dev_rfc.trc file below
>TS> Thu Jan 22 11:09:04 2009
T:204 Error in program 'igsmux': ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ISP, GWHOST=SAPPROD, GWSERV=3300
LOCATION CPIC (TCP/IP) on local host
ERROR partner 'SAPPROD:3300' not reached
TIME Thu Jan 22 11:09:04 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2770
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 777
dev_disp
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ISP
systemid 561 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 5052
Wed Jan 21 22:00:25 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5052) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Jan 21 22:00:30 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAPPROD_ISP_00 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000185B0050, size: 6348592)
DpShMCreate: allocated sys_adm at 00000000185B0050
DpShMCreate: allocated wp_adm at 00000000185B2150
DpShMCreate: allocated tm_adm_list at 00000000185B83A0
DpShMCreate: allocated tm_adm at 00000000185B8400
DpShMCreate: allocated wp_ca_adm at 0000000018B1C2A0
DpShMCreate: allocated appc_ca_adm at 0000000018B22060
DpShMCreate: allocated comm_adm at 0000000018B23FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000018BAAC30
DpShMCreate: allocated gw_adm at 0000000018BAACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0000000018BAACE0
DpShMCreate: allocated wall_adm at 0000000018BAACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
ERROR => <EsNT> CreateFileMapping name=ES_SEG_00_007 error=1455 [esnti.c 1184]
ERROR => <EsNT> paging file too small for 2044 MB mapfile [esnti.c 1186]
Memory diagnostic *
Systeminformation
Processor-Typ : Processor-Count : 4
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 2
NT Pagefile Informations
Config. minimum size : 52426752 K
Config. maximum size : 55570432 K
Avail. maximum size : 55570432 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
2095104 K
4190208 K
4190208 K
2476072 K
2
h:\pagefile.sys
50331648 K
51380224 K
51380224 K
51380224 K
NT Task Manager Informations
Total Handles : 66
Total Threads : 0
Total Processes : 123823424
Commit Charge Total : 6619245 K
Commit Charge Limit : 1548 K
Commit Charge Peak : 0 K
Phys.Memory Total : 3538996 K
Phys.Memory Available : 0 K
File Cache : 123823424 K
Kernel Memory Total : 0 K
Kernel Memory Paged : 48 K
Kernel Memory Nonpaged : 0 K
Memory usage of current process
Total virt.address space : 0000007499415424 K
Avail.virt.address space : 0000007498310960 K
Private Pages : 0 K
Total heap size : 21337 K
Virtual memory regions : 0 K
Uncommitted heap memory : 13208 K
Allocated heap memory : 6546 K
Moveable heap memory : 605 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
4380
msg_server.EXE
[MS] ISP_01
15832 K
15832 K
12344 K
12344 K
1
4032
enserver.EXE
[**] ISP_01
25592 K
25592 K
56632 K
56640 K
3
5636
sapstartsrv.exe
28664 K
28664 K
18712 K
18712 K
4
6036
msg_server.EXE
[MS] ISP_00
16072 K
16072 K
12736 K
12744 K
2
5052
disp+work.EXE
51568 K
51664 K
190464 K
241904 K
6
276
igswd.EXE
[**] ISP_00
7120 K
7344 K
2640 K
3000 K
0
4272
igsmux.exe
20304 K
20304 K
17632 K
17632 K
2
3272
igspw.exe
6328 K
6328 K
3448 K
3448 K
0
988
igspw.exe
6328 K
6328 K
3448 K
3448 K
0
Sum
177808 K
318056 K
Error 11 while initializing OS dependent part.
ERROR => DpEmInit: EmInit (1) [dpxxdisp.c 9634]
ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c 9561]
DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jan 21 22:00:40 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Jan 21 16:30:40 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
8 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
9 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
10 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
11 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
12 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
13 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
14 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
15 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
16 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Wed Jan 21 16:30:40 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Wed Jan 21 16:30:40 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Jan 21 16:30:40 2009
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jan 21 22:00:45 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPPROD_ISP_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5052) [dpxxdisp.c 10421]
Good Bye .....
One more issue is that when i try to move my cluster from active to passive node the shared folders /sapmnt,saploc and db2dumps disappears and even after restoring the cluster to the active node i'm unable to see the shared folders.
Can anyone help me out in resolving this issue
Regards,
Raj
Edited by: Rajagopal Desikan on Jan 26, 2009 8:58 PM> *** ERROR => <EsNT> CreateFileMapping name=ES_SEG_00_007 error=1455 [esnti.c 1184]
> *** ERROR => <EsNT> paging file too small for 2044 MB mapfile [esnti.c 1186]
You did not meet the requirements necessary for a SAP installation, you pagefile is too small. Check the installation guide for necessary pagefile requirements.
Markus -
Hi
-when i install default instance MSSQLSERVER i added a domain account as a service account,
- when i change port for TCPIP PORT , and after sql service and sql agent service did not started again.
it thrown error
The SQL Server (MSSQLSERVER) service failed to start due to the following error:
The service did not start due to a logon failure.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
but when i add domain\sqservice account in administrators group these services started,
1) here why this change behavior happened
2i changed the port 1500
adilHI
the sql instance service is running with domain/sqlservice account ,
- i stopped the sql service service
- when i start it not started again and i found below error message
Domain and account: MOJPORTAL\spsqlservice
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this.
If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed,
check with your domain administrator to find out if a Group Policy object associated with this node might be removing the right.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7041</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2015-04-24T17:12:58.326973300Z" />
<EventRecordID>2177</EventRecordID>
<Correlation />
<Execution ProcessID="520" ThreadID="4044" />
<Channel>System</Channel>
<Computer>PORTALSQL1.mojportal.com</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">MSSQL$xSQL</Data>
<Data Name="param2">xxxL\spsqlservice</Data>
</EventData>
</Event>
adil -
Problem exists on my HP C0mpaq 6720s , Vista operating system.
System restore, restored to version 3.6.3 instead of 3.6.10 . This did not start either. Previously, I used Revo Uninstaller Pro to remove all Mozilla items, checked regedit and removed all Mozilla folders, then reinstalled 3.6.11 from your website. Mozilla would not start and XUL error stated 1.9.2.10 followed by min 1.9.2.11 and max 1.9.2.11 . This was the same error report that appeared after the automatic update.
So I am at a loss and without Mozilla .I have successfully resolved this issue on my PC by allowing updater.exe through the firewall. This updater.exe is located in the folder where your Mozilla Firefox was installed. The default folder is "C:\Program Files\Mozilla Firefox\updater.exe"
Happy Browsing..... -
My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Hi
I just now updated dec 2013 c.u to sharepoint server 2010 sp2
I get this error in event viewer when I browse web applications , they not open even
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: OWSTIMER
Process ID: 3836
AppDomain Name: DefaultDomain
AppDomain ID: 1
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
adilThis messge I get initially I get two times (1)
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: w3wp
Process ID: 4600
AppDomain Name: /LM/W3SVC/2141356646/ROOT-1-130405218187772398
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Affected Endpoint: http://spfapp02:32843/548f72e6a39f401e95e92711aea13c45/MetadataWebService.svc
aftert this message three times (2)
The Managed Metadata Service 'Managed Metadata Service' is inaccessible.
and after (3)
The health service has removed some items from the send queue for management group "MOJOmanagement" since it exceeded the maximum allowed size of 15 megabytes.
after (4)
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
and this time I seen I am unable to browse web applications
and
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
adil -
Hello,
I have an issue configuring a simple File Adapter Content Conversion, it will be great to give me some support as I'am new in the PO Environment.
Iam reading a flat file and trying to write into an XML in the same FTP server
I have a 1 to 1 Mapping as follows
And my Content Conversion at Sender side Looks like this
After running the configuration Iam getting following error message
Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all
My System is the SAP Netweaver Process Intgration 7.4 single Java stack
Do you have any idea how to fix this issue?
Many thanks in advance
KhadimHi evrybody
I have enabled the tracing of ICO and have seen that my payload for the message mapping is ok,.
<ns:hartgeldbest_ERP_KT xmlns:ns="http://xxxxxx.de">
<Recordset>
<header>
<gesellschaft>03</gesellschaft>
<filiale>000</filiale>
<satzart>11</satzart>
<datum>00000000</datum>
<kennzeichen>1</kennzeichen>
</header>
</Recordset>
</ns:hartgeldbest_ERP_KT>
The issue is on detrmining the RECEIVER in the Main-XML
<sap:Main xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3"versionMinor="1" SOAP:mustUnderstand="1">
<sap:MessageClass>ApplicationMessage</sap:MessageClass>
<sap:ProcessingMode>asynchronous</sap:ProcessingMode>
<sap:MessageId>ae41678e-da87-11e3-cd0f-0000006831a2</sap:MessageId>
<sap:TimeSent>2014-05-13T10:16:43Z</sap:TimeSent>
<sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty"/>
<sap:Service>CC_Hartgeldbest_File2Idoc</sap:Service>
</sap:Sender>
<sap:Receiver>
<sap:Party agency="" scheme=""/>
<sap:Service/>
</sap:Receiver>
<sap:Interface namespace="http://xxxxx.de">hartgeldbest_KT_async_out</sap:Interface>
</sap:Main>
Is it possible that the receiver is overwritten due to the Content Conversion? Because if I set my Message Protocol to "File" the receiver determination will work.
Any idea?
Thx
Khadim -
DistributedCacheService not starting after installing CU5
Hello!
I installed AppFabric CU5 (http://support.microsoft.com/kb/2932678) on a VM running SharePoint 2013 (Windows 2012).
After installing (and updating the config file), the AppFabricCachingService no longer starts. The event viewer has the following:
Event ID: 1026
Application: DistributedCacheService.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.TypeInitializationException
Stack:
at Microsoft.ApplicationServer.Caching.VelocityWindowsService.StartServiceCallback(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
Event ID: 1000
Faulting application name: DistributedCacheService.exe, version: 1.0.4632.0, time stamp: 0x4eafeccf
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16384, time stamp: 0x5010ab2d
Exception code: 0xe0434352
Fault offset: 0x00000000000189cc
Faulting process id: 0xa0
Faulting application start time: 0x01cff81d1301034e
Faulting application path: c:\Program Files\AppFabric 1.1 for Windows Server\DistributedCacheService.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 50d61782-6410-11e4-93fe-00155d73c008
Faulting package full name:
Faulting package-relative application ID:
I removed and added the host into the cluster, but it still did not start. I even updated the HOST file to have the fully qualified name.
Any assistance is greatly appreciated.
Thanks,
GregHi,
According to your post, my understanding is that after installing the AppFabric CU5, the AppFabricCachingService could not start.
After installing the update you should do the following in all the servers that are holding the distributed cachec.
After applying the CU, AppFabric uses a nonblocking garbage collection (background server garbage collection).
Nonblocking garbage collection is a new feature in the .NET Framework 4.5.
To apply this fix, follow these steps.
1. Upgrade the servers to the .NET Framework 4.5.
2. Install the cumulative update package.
3. Enable the fix by using the following setting <appSettings><add key="backgroundGC" value="true"/></appSettings> in the DistributedCacheService.exe.config file between
</configSections>
<appSettings><add key="backgroundGC" value="true"/></appSettings>
<dataCacheConfig>
4. Restart the AppFabric Caching service for the update to take effect.
Note :By default, the DistributedCacheService.exe.config file is located under the following directory:
%ProgramFiles%\AppFabric 1.1 for Windows Server
For more information:
http://blogs.msdn.com/b/calvarro/archive/2014/03/20/points-to-consider-with-distributed-cache-on-sharepoint-2013.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
I can't publish a folio into my DPS Professional Account.
This is the error message:
An error has occurred while trying to publish your folio.
We could not start this operation. Please try again later.
Anyone can help?
TksHi,
It seems there is something wrong with your sign up process, sorry for the inconvenience, this is technical forum, the account issue is out of our range, please follow steps below to contact with azure support, it's a best choice for you.
Get the support channel at:
http://www.windowsazure.com/en-us/support/options/
If you have any other concern, please feel free to let me know.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
"Plugin did not start correctly" error message
I have the current version of Photomatix Pro loaded as an HDR plugin for Lightroom 3.0. When I try to export the series of images from Lightroom to Photmatix, I get the following message:
Info
Plugin did not start correctly
Please check whether you invoked the plugin by choosing 'File > Plug-in Extras'
The process that I used in Lightroom was to hold down CTRL and select the 5 images while in Lightroom 3.0. The I right clicked, went to Export and then to Photomatix Pro which appears in the list. After doing this, I receive the above message.
The way that I installed the software was to first have Lightroom 3.0 installed and updated. Then I installed the Photomatix Pro software and answered the question during installation that I wanted to use it as a plugin in LR. That was it.
I just discovered something. In LR I went to File, Plugin Extras, Export to Photomatix Pro and this worked!!!! There is evidently a problem with the right click, export to a plugin. Don't know how to pass this on to the developers so if someone does, please do so.
Thanks, DonHello @jimboware and welcome to the HP Forums!
As far as I'm aware, there is no Windows 6, did you perhaps mean Windows 7? This What's My OS link will help if you'd like
When you're starting the install, do you plug in the USB cable before the software asks for it?
Let me know that information and we'll go from there!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP -
'error 1069 - (The service did not start due to a logon failure) in BAM
I installed BAM on XP SP2, i do have IIS configured and XE DB, after installing when i tried starting the services as per post-installion guide.i did found the error 'An error 1069 - (The service did not start due to a logon failure).In google i could find a remedy saying
Remedy: Go to Start /Programs / Administrative tools / Services. Right-click the Goodlink Server and select Properties. Click the Log On tab. Retype the correct password. Start the Goodlink service.
i did so but did found the same error.So i tried changing a few things in LogOn tab such as " Earlier it was logging in from machine name and pwd , since it gave an error" i changed it to local system account ." now all services of BAM have started except Oracle BAM Active Data cache.
Anyone pls rep how do i resolve this? Do i need to re-install? i need this to be done very urgently.Windows XP is not a certified platform for BAM. However, the product works fine on XP for evaluations and demos. For production, use a certified/supported version of Windows as is documented in the Software System Requirements section of the BAM Install Guide.
All Postinstall steps apply to all versions of Windows that BAM runs on except for the Postinstall step called "Required Configuration for Microsoft Windows Server 2003". As indicated by the step name, this one is for W2003 only.
"network not found windows 53 error" is generally a network, account or password issue. Please follow the Install Guide step by step to avoid installation issues like this.
See "Troubleshooting Start Page Issues" for start page problems.
As indicated in the Install Guide, you can use host names or IP addresses:
"12. On the Configure location of Oracle BAM step, enter the host name or the IP
address where each component is to be installed, even if it is not being installed at
this time, then click Next."
Regards, Stephen -
There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor untill now the monitor is black..
It maybe trying to boot from the incomplete install.
Try starting your Mac while holding down the Option key, it should then list all the available boot drives including the Mac OS X one. Boot from the Mac one and then you can wipe the damaged PC one or set the Mac to stay booting in to OS X. -
Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
ThanksStep by step, how did you arrive at seeing this agreement?
-
Windows 8.1 is not starting after installing Bluetooth driver
I cannot start Windows 8.1 Pro (64Bit) after enabling Virtualization ( because I need HYPER-V ) from BIOS settings.
It was perfect before installing RaLink Bluetooth Driver update.
I use "HP ENVY 15 Touchsmart j001tx" laptop.
Please have a look on this articles also:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/windows-81-is-not-starting-after-enable/5aee0db6-7cdd-46b7-b85f-f048d9cf5d7e
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/bluetooth-driver-for-hp-probook-4740s-crashing/633a2200-ecdf-45bb-b643-075650ea3a16
Further information:
HYPER-V and Bluetooth individually works fine. But laptop is not starting up when both are installed. Please help me.
Sushovan MukherjeeHi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1 -
Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
JosephRan into this error, and the password was correct. What the System Event Log said:
Code SnippetEvent Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7041
Date: 10/8/2008
Time: 9:33:09 AM
User: N/A
Computer: ComputerName
Description:
The SQLSERVERAGENT service was unable to log on as DomainName\SQLAgent with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: SQLSERVERAGENT
Domain and account: DomainName\SQLAgent
This service account does not have the necessary user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this is happening.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
...sure enough it had been removed from the "Logon as a service" list. Hope this helps.
Maybe you are looking for
-
How do I make a ringtone for free using iTunes 8.2.1 on Windows Vista?
**Hi, I recently bought a new comp and went from an older version of iTunes to 8.2.1, and now operate on Windows Vista. I used to be able to create a 30sec AAC version of a song and change the format to m4r which made in into a ringtone, but either I
-
Acrobat 9-forms-Radio buttons print different than check boxes
I am using Acrobat Pro 9 to create forms. I've used both radio buttons and check boxes (that are circles). Forms were designed in InDesign with Zapf Dingbats as the open circles to be filled in. I used radio buttons when the user had to pick one over
-
REG: SFTP to SFTP scenario
Hi All, I have a SFTP to SFTP scenario where file is getting picked up from the source location and failing at the taget side. When tested with File to SFTP the same channel is able tp place file sucessfully. However when scena
-
Hi friends, I've two similar tables A and B with one more column in table B that is "Active Flag". Table A Rowid----Fname----Lname 101-----AF1----------AL1 102----AF2-----------AL2 103-----AF3---------AL3 104-----AF4---------AL4 Table B Rowid-----Fna
-
I don't know why, but this seems massivly over complicated. Basically I'm wanting to make the clock at the bottom right of this page count down in days hours and minutes to the next event - http://www.abcdev.co.uk/site/index.html I want it to keep th