Gpedit.msc does not exist in 10074 (windows 10)
I skipped the connect to the internet portion when installing the 10074 update.
I want to enable the device for development (of Universal Apps) in VS2015 RC, but gpedit.msc does not exist.
Instead of doing a re-install again, what are the registry settings to change to enable universal app development so I can just change them through regedit?
I skipped the connect to the internet portion when installing the 10074 update.
I want to enable the device for development (of Universal Apps) in VS2015 RC, but gpedit.msc does not exist.
Instead of doing a re-install again, what are the registry settings to change to enable universal app development so I can just change them through regedit?
See if the following steps will work for you.............
Go to C:\Windows\System32 ............ scroll way down to find gpedit.msc, or in the
search box at top right, type gpedit.msc
Similar Messages
-
I have a script that needs to be modified to create a folder on the desktop and share with everyone if it does not exist on a Windows 7 PC - No Domain. Here is the script, need help at bottom
=======================================================
Set objShell = CreateObject("WScript.Shell")
objComputer=objShell.ExpandEnvironmentStrings("%ComputerName%")
IF Right(objComputer,3) = "000" Then
Else
strShortcut = objShell.SpecialFolders( "Desktop" ) & "\%username% Share.lnk"
strShortcut = objShell.ExpandEnvironmentStrings(strShortcut)
Set objLink = objShell.CreateShortcut( strShortcut )
objComputer=objShell.ExpandEnvironmentStrings("%ComputerName%")
objServer=Left(objComputer,7) & "-000"
objLink.Description = objShell.ExpandEnvironmentStrings("%username% Share")
objLink.TargetPath = objShell.ExpandEnvironmentStrings("\\" & objServer & "\Users\%username%\Desktop\%username% Share")
objLink.Save
End If
=======================================================
if "C:\Users\%username%\desktop\%username% Share" exits do nothing
if not create the folder and share it with everyone read only
======================================================
The section directly above is what I need to add, anyone have a clue how to make this work?Bill: Can you suggest a site? I am in the weeds here trying to get this done yesterday. I have been reading code and trying to figure this out since yesterday morning. I have to roll out this image to 2 dozen machines and
this is holding us back. Any idea which site I can post to for help?
The bigger issue is that you have been given the answer to this in many different forms and, because you have no technical background, you fail to see what is being shown to you. That is why I have repeatedly suggested that you hire a consultant.
The link to the learning material is at the top o this page. You can also search the web for Windows consultants.
In the learning link you can also look up how to manage files. If, in the beginning you had chosen to use the learning materials you might not be in this bind.
Look up and research the FileSystemObject.
¯\_(ツ)_/¯ -
I see "Add New Window" but..."Add New Tab" button does not exist in the Window -Customize Toolbar any longer, and not on my Navigator toolbar. Where can I find one to put on my Navigator toolbar, please?
ThanksIt's the "+" on the Tab bar. You can move it to the Navigation Toolbar if you prefer. When you start Customize, the + moves to the far right end of the Tab bar. You can drag it where you want (see attached image).
Any luck? -
Error #3003: File or directory does not exist - Adobe Muse - Windows 7 - 64bit
Does anyone knows why this occurred? I had used adobe muse for quite some time now for my personal portfolio but this is the first
time I got this prompt. I can save the Muse file but I cannot preview in muse nor in a browser also I cannot export the HTMLIf you look at the end of the MuseLog.txt file (in your "My Documents" folder), does it mention this error? If so, does it indicate the path of the file or folder that's not found? Knowing that would help diagnose the cause. My first guess would be that the permissions on your preferences folder location have been incorrectly altered such that Muse can no longer write the preview files there.
-
Video effects (none button) does not exist in inspector window
New to iMovie 09. Only issue I am having so far is finding the video effects. I select a clip and then open the inspector window. But when I click on "Clip", there is no "None" button to open the effects window. It only shows some info on "Stabilizatoin". Nothing else. Under the "Video" button are the exposure and color adjustments, etc.
I am sure I am overlooking something simple, but I have read through all documentation and this forum and nothing seems to be working. I have set "Show Advanced Options" from preferences.
Any suggestions are greatly appreciated !If you select the clip then hit Letter "i" for Inspector, you'll get a window that roughly looks like this (bottom half is missing because clipped it off). What you are most interested in clicking on is the Video Effect: pulldown menu. When you click on it, the Inspector flips around and gives you thumbnail images of all the video fx you can apply. I have iMovie '11, not '09 so your version might look slightly different.
-
TNS-12545: Connect failed because target host or object does not exist
Hi all, I have a bit of a problem, I have gone thru the posts and tried out suggestions but it didn't work. When i type in
LSNRCTL> services
I get this error:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=mattlek2)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.162.8)(PORT=1521)))
TNS-01189: The listener could not authenticate the user
When I type in : LSNRCTL> start
I get this:
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.1.0.2.0 - Production
System parameter file is C:\oracle\product\10.1.0\Db_2\network\admin\listener.ora
Log messages written to C:\oracle\product\10.1.0\Db_2\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mattlek2.ifactory.co.za)(PORT=1521)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.162.8)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
This is my tnsnames.ora file:
# tnsnames.ora Network Configuration File: C:\oracle\product\10.1.0\Db_2\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
GPGWL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.162.8)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = GPGWL)
ORCL_LIVE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 196.36.116.218)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
APPS =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 196.36.116.219)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = VIS)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
EXEL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.162.8)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = idev)
EXEL_IDEV =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.162.8)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = idev)
This is my listener.ora file:
# listener.ora Network Configuration File: C:\oracle\product\10.1.0\Db_2\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = GPGWL)
(ORACLE_HOME = C:\oracle\product\10.1.0\Db_2)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = mattlek2)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.162.8)(PORT = 1521))
Any help would be greatly appreciated.
Thank youjust check the string key it should be
key=extproc_for_xe
Try -
Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards. -
I upgraded to win 8.1 and VS 2013. I created a new Windows 8.1 C# grid project and tried to compile it and I'm seeing the following error: Error 1 The type or namespace name 'Foundation' does not exist in the namespace [my namespace](are
you missing an assembly reference?)
The errors are in navigationhelper.cs line 59
[Windows.Foundation.Metadata.WebHostHidden] // Foundation has the squigglies
public class NavigationHelper : DependencyObject
and app.xaml.cs line 68 ==> rootFrame.Language = Windows.Globalization.ApplicationLanguages.Languages[0]; which causes this error: Error 2 The type or namespace name 'Globalization' does not exist in the namespace [my namespace] (are you missing
an assembly reference?)
Windows phone and mvc projects are working fine and I've installed all the updates and even tried to fix vs 2013.
Any help Is greatly appreciated.I did some more investigation and noticed that if I create an app with a "." in the name then this problem occurs. For example create a windows store project with the default name "App1": this will compile.
However if I name the project "App1.Forms" to correspeond with the default namespace I want, then this problem occurs. Still investigating but anyone should be able to repro it with that step. -
Good evening,
I've been working on and with a VS2013 Update 2 / Azure SDK 2.3 Cloud Service project for a while now and never had a problem debugging it (setting the .ccproj Project as Startup Project) but at the moment I cannot Debug it anymore - I always get the following
error message:
Failed to debug the Windows Azure Cloud Service project. The output directory 'D:\Workspace\Development\Sources\AzureBackend\csx\Backend - Debug' does not exist.
Now what's odd here, is the last part - the "Backend - Debug" is the Solution configuration name, ALL projects in that particular solution configuration are set to the Debug Configuration. The .ccproj file also only specifies Debug|Any CPU (and
Release|Any CPU respectively) as its output folder(s). Why is the Solution config appearing up there?
And more importantly.. why is this happening and what can I do?!
Thanks,
-Jörg
Ps: there seems to be a related
connect bug and these sorts of issues do appear around the forums but none contains a solution (neither reinstalling the Azure SDK nor cloaking the workspace/re-retrieving & building everything worked).Good morning Jambor,
I already tried de-installing everything Azure-Tooling related including the Azure SDK, Restarting my machine and re-installing the SDK.
Same result. I can build the .ccproj perfectly fine and the cspack file IS generated perfectly fine, only debugging does not work and there's NO information in the VS output window (again - all projects succeed to build).
I tried explicitely running VS as Administrator, no change. I removed all IIS Express sites (as the ccproj has one web worker role), remapped my local TFS workspace.. nothing helped.
As building works, deploying to Azure Cloud Service (manually and via Publish inside VS) all works -perfectly-, I am pretty sure this IS a bug and I'd LOVE to help to get this fixed. As I said, currently I cannot debug and/or run & test my work, hence
I cannot do ANY work. -
Hello, I did not find any note regarding the WDR_TEST_DDIC_SHLP component. As the testing application can not be run this way (error thrown from the subject), is there any workaround anybody knows?
I'm on ECC 6.0, kernel release 700, patch 236, ABAP 1563. In other words SAP_BASIS 700 / 0028, SAP_ABA 700 / 0028.
(And yes, the W_WARNING_WINDOW really does not exist in the component, although the starting window of the application (WDR_TEST_DDIC_SHLP) is DDIC_SHLP). And there is no code in any of the hook methods of the window, so it has to be some call from the views that are counted over 30. Can anybody suggest how to over-piss this situation?Hi,
The W_WARNING_WINDOW is available in later versions of Netweaver. I suggest you to raise an OSS message to SAP as this is a standard delivered component.
Regards,
Kiran -
Error 1075: The dependency service does not exist or has been marked for deletion
Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support -
When I try to start Windows installer in Services.msc, it gives me this error Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration. How do I fix this? I am running Windows 7 ultimate.
Hi,
Based on the error code, we can use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration for Windows Installer service.
Besides, the following two threads focus on the similar issue and can be referred to as reference.
Error 1297: "ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE 1297” FTP service in Windows 7 computer
http://social.technet.microsoft.com/Forums/windows/en-US/52329b48-1ba9-4cab-a6b2-efd8db173625/error-1297-errorincompatibleserviceprivilege-1297-ftp-service-in-windows-7-computer?forum=w7itpronetworking
Service fails to start, error 1297 and 7000
http://social.technet.microsoft.com/Forums/windowsserver/en-US/419ba006-4413-4036-8c49-252b08593131/service-fails-to-start-error-1297-and-7000?forum=winserverDS
Hope it helps.
Best regards,
Frank Shen -
The name "Folder" does not exist in the namespace
I am trying to learn Wpf and doing some of the examples on the Microsoft site. https://msdn.microsoft.com/en-us/library/vstudio/bb546972(v=vs.110).aspx?cs-save-lang=1&cs-lang=vb#code-snippet-1
I am using Visual studio 2013. As I work through the example I am getting the following error.
Error 1
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
11 17
FolderExplorer
Error 2
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
16 7
FolderExplorer
Here is the code:
<Window x:Class="MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:my="clr-namespace:FolderExplorer"
Title="Folder Explorer" Height="350" Width="525">
<Window.Resources>
<ObjectDataProvider x:Key="RootFolderDataProvider" >
<ObjectDataProvider.ObjectInstance>
<my:Folder FullPath="C:\"/>
</ObjectDataProvider.ObjectInstance>
</ObjectDataProvider>
<HierarchicalDataTemplate
DataType = "{x:Type my:Folder}"
ItemsSource = "{Binding Path=SubFolders}">
<TextBlock Text="{Binding Path=Name}" />
</HierarchicalDataTemplate>
</Window.Resources>
I have a class file named Folder.vb with this code.
Public Class Folder
Private _folder As DirectoryInfo
Private _subFolders As ObservableCollection(Of Folder)
Private _files As ObservableCollection(Of FileInfo)
Public Sub New()
Me.FullPath = "c:\"
End Sub 'New
Public ReadOnly Property Name() As String
Get
Return Me._folder.Name
End Get
End Property
Public Property FullPath() As String
Get
Return Me._folder.FullName
End Get
Set(value As String)
If Directory.Exists(value) Then
Me._folder = New DirectoryInfo(value)
Else
Throw New ArgumentException("must exist", "fullPath")
End If
End Set
End Property
ReadOnly Property Files() As ObservableCollection(Of FileInfo)
Get
If Me._files Is Nothing Then
Me._files = New ObservableCollection(Of FileInfo)
Dim fi As FileInfo() = Me._folder.GetFiles()
Dim i As Integer
For i = 0 To fi.Length - 1
Me._files.Add(fi(i))
Next i
End If
Return Me._files
End Get
End Property
ReadOnly Property SubFolders() As ObservableCollection(Of Folder)
Get
If Me._subFolders Is Nothing Then
Try
Me._subFolders = New ObservableCollection(Of Folder)
Dim di As DirectoryInfo() = Me._folder.GetDirectories()
Dim i As Integer
For i = 0 To di.Length - 1
Dim newFolder As New Folder()
newFolder.FullPath = di(i).FullName
Me._subFolders.Add(newFolder)
Next i
Catch ex As Exception
System.Diagnostics.Trace.WriteLine(ex.Message)
End Try
End If
Return Me._subFolders
End Get
End Property
End Class
Can someone explain what is happening.
Thanks HalDid you try to build the application (Project->Build in Visual Studio) ? If the error doesn't go away then and you have no other compilation errors (if you do you need to fix these first), you should replace "FolderExplorer" with the namespace
in which the Folder class resides. If you haven't explicitly declared a namespace, you will find the name of the default namespace under Project->Properties->Root namespace. Copy the value from this text box to your XAML:
xmlns:my="clr-namespace:FolderExplorer"
The default namespace is usually the same as the name of the application by default so if your application is called "FolderExplorer" you should be able to build it.
If you cannot make it work then please upload a reproducable sample of your issue to OneDrive and post the link to it here for further help.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. -
Error: While Opening a Custom view- Action &OBJECT_ID& does not exist
Hi Experts,
On the click of button, I am creating a window and opening as follows:
wd_comp_controller->go_window = lo_window_manager->create_window(
window_name = 'ZW_CERTIFICATION_POP'
title = lv_pop_title
close_in_any_case = abap_false
message_display_mode = if_wd_window=>co_msg_display_mode_selected
close_button = abap_true
button_kind = if_wd_window=>co_buttons_okcancel
message_type = if_wd_window=>co_msg_type_none
I have written following code in INIT method of View to Subscribe events but it is dumping with the Error "Action &OBJECT_ID& does not exist ".
DATA lv_ok type string.
DATA lv_cancel type string.
DATA lo_popup TYPE REF TO if_wd_window.
DATA lo_view TYPE REF TO if_wd_view_controller.
DATA lo_window_ctlr type ref to if_wd_window_controller.
register button events
lo_view = wd_this->wd_get_api( ).
lo_window_ctlr = lo_view->get_embedding_window_ctlr( ).
wd_comp_controller->go_window = lo_window_ctlr->get_window( ).
lv_ok = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/OK' ).
wd_comp_controller->go_window->subscribe_to_button_event(
button = if_wd_window=>co_button_ok
button_text = lv_ok
action_name = 'OK'
action_view = lo_view
is_default_button = abap_true
lv_cancel = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/CANCEL' ).
wd_comp_controller->go_window->subscribe_to_button_event(
button = if_wd_window=>co_button_cancel
button_text = lv_cancel
action_name = 'CANCEL'
action_view = lo_view
is_default_button = abap_true
How to solve this exception causing application to dump.
Thanks
DepeshHi Depeshn,
I have written following code in INIT method of View
I think you have writen code containg subscribe_to_button_event method in the INIT method of the pop up view. But actually you should write that code where you are generating the pop up window. i.e in the ONACTION method of the button (which when clicked generates the pop up window.)
It should be something like this:
" This whole code should come in the event handler of the button.
wd_comp_controller->go_window = lo_window_manager->create_window(
window_name = 'ZW_CERTIFICATION_POP'
title = lv_pop_title
close_in_any_case = abap_false
message_display_mode = if_wd_window=>co_msg_display_mode_selected
close_button = abap_true
button_kind = if_wd_window=>co_buttons_okcancel
message_type = if_wd_window=>co_msg_type_none
DATA lv_ok type string.
DATA lv_cancel type string.
DATA lo_popup TYPE REF TO if_wd_window.
DATA lo_view TYPE REF TO if_wd_view_controller.
DATA lo_window_ctlr type ref to if_wd_window_controller.
* register button events
lo_view = wd_this->wd_get_api( ).
lo_window_ctlr = lo_view->get_embedding_window_ctlr( ).
wd_comp_controller->go_window = lo_window_ctlr->get_window( ).
lv_ok = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/OK' ).
wd_comp_controller->go_window->subscribe_to_button_event(
button = if_wd_window=>co_button_ok
button_text = lv_ok
action_name = 'OK'
action_view = lo_view
is_default_button = abap_true
lv_cancel = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/CANCEL' ).
wd_comp_controller->go_window->subscribe_to_button_event(
button = if_wd_window=>co_button_cancel
button_text = lv_cancel
action_name = 'CANCEL'
action_view = lo_view
is_default_button = abap_true
I hope it helps.
Regards
Arjun -
The name '' does not exist in the current context
I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally this
has also happened during normal debbuging of running code on my machine.
I have included 2 screen shots. The first is when it is working. I have a break point set at the declaration of list of types. At this point all my variables are still reporting their values back to the debugger. Once I step over this to the next line (screen
shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
This problem is annoying me to no end. If anyone has any insight as to why this might be happening I would be very much appreciative.
My Settings/Configuration
Using Visual Studio 2013 Premium (Version 12.0.31101.00 Update 4)
Projects are all set to Target Framework = .NET 4.5.1
Resharper 9.1 is installed
My active configuration is debug mode, Any CPU
My PC is 64bit and so is the O/S windows 8.1
All of my projects are also compiled and built in debug mode
For all my projects configuration debug has the Optimize Code check box unchecked
I am unit testing code in an outside project referenced by the unit testing project (standard unit test project setup)
I make use of the latest version of NSubstitute in my tests although I do not think that would have any bearing on this issue
I omitted the code following the error because it is not relevant. I had cut it out and replaced it with a Task.Delay(4) which resulted in the same issue.
What I have tried so far
I have tried debugging the unit test from Visual Studio Test Explorer instead of from Resharper with the same result.
If I remove 2 items at the end of the array it starts to work again (so 6 items initialized instead of 8)
I clean solution with rebuild has no effect
Removing properties of the array also seems to work, example remove all initialization of property Value
Mark as answer or vote as helpful if you find it useful | IgorHi IWolbers,
>>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
this has also happened during normal debbuging of running code on my machine.
So you mean that it worked well before, am I right?
If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
https://msdn.microsoft.com/en-us/library/ms241278.aspx
To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
>>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
In addition, do you check other debugger window like local or others?
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
HP laserjet pro 1102w printer problem
When I have sent print order wirelessly, only the first page of the doc is printed and the printer gives error status, How can I solve this problem. Thanks
-
HT5654 Missing files after the update
I am unable to start itunes since the latest update. I keep getting missing files pop up boxes and I have followed the directions and reinstalled - have tried both using the repair function and a the uninstall and reinstall function but nothing has f
-
Moving all my data from my old ibook to my new powerbook
Hi, i have recently purchased a 12" powerbook G4 and want to move all my data from my iBook G4. How can i make this happen so that it is set up exactly the same as my iBook including my Mail and all my other settings? Thanks Darren
-
X,Y position of your system tray icon
Hi In my app i have a functionality by which i can minimize my desktop app to systray..On minimizing my app, an icon is created in the system tray..now is this possible for me to get the x,y position of that icon located in the system tray..i want to
-
Including Help in the Linked List Entries
Hi, Can any one explain how to include Help text to the Linked List Entries like including normal help in the other APEX 2.2 items? Thanks Chitra