GPS looses connection after hours driving on 2710

Hi,
Every now and then I'm using the navigation on my 2710. Usually it does the trick. However after using it for a longer drive (4-5 hours) I find that gradually it will loose its GPS connection (crossed out satelite dish) more and more, and in the end will not regain connection anymore. Only solution is: remove battery, wait 20 seconds, remount battery and restart. Connection will be good for hours to come.
During the trip I usually charge the battery after a while, so it is not because the battery fails.
Who knows why this happens, and how to prevent it?
BvMNokia
Using 2710 since september 2010

@aspergerguy
Well the device gets warm, yes. Eather through sunshine or hard work. Not hot though. I charge the battery not continuously but only when needed. The thing is, that the device functions fine after a 20 sec battery removal (hard reset). In 20 secs the device will not cool down!! Also when I drive regularly shorter distances of about 1,5-2hours, the unit will eventually also acquire the same problems, even when the time used per trip is shorter. So it seems that there is some error in the software.
When I drive for about 8 hours, after about 5 hours problems start occurring (small intervalls of no sat connection). Since I drive mostly with young children on board for the longer distances, we will stop a couple of times during the trip (usually I take my phone with me and switch the navigation off in the mean time). This will somehow prevent the phone of making overtime.
Especially since the problems also occur when driving shorter distances regularly, I tend to think of a software bug (say some memory is not released by certain processes).

Similar Messages

Datasocket Server looses connections after a few hours "Parsing URL"

Hi there,
I need some help cause the DataSocket server is doing some bad stuff...!
The server runs on a WinNT 4.0 platform as a datalogger. It works fine, but after a few hours it seems the server looses connection somehow, the datasocket status of the frontpanel elements tells: "Connecting: Parsing URL" .
The server has about 5 DINT variables and about 3 clusters containing INT variables (size about 30).
I really ran out of ideas aof what happens on this "old" machine, maybe someone had some preblems like me and solved them....
Thank for hints and tipps!

Hello,
what service packs for Windows NT have you installed?
Datasocket server crashes after a short period of time when diagnostic
window is open (Tools->Diagnostics). Disable the "Auto-Refresh"
option in the Diagnostic Dialog from the Options menu.
regards
P.Kaltenstadler
National Instruments

After upgrade to 3.0, I loose connection after wifi to cellular network

After upgrade to 3.0, When I quit a wifi zone, I loose connection to cellular network. I have to restart the IPhone to find the cellular network. I am on FIDO with a candian number.
That look like the phone can't jump to the cellular network.

http://shop.o2.co.uk/update/settings.html
Data Settings for Pay & Go and Pay Monthly
(non iPhone tariff) customers
If you're a Pay & Go customer and have the iPhone OS 3.0 Software, you'll need to change your iPhone APN (data) settings. This will get features like mobile internet and picture messaging (MMS) working. Details below.
If you're a Pay Monthly customer but don't have the iPhone Bolt On, or a specific iPhone tariff, then you won't be able to get the full iPhone experience.
Here's what you'll need to do:
From the main screen of your iPhone tap Settings > General > Network
It has done thre same for UK pay and go:
http://shop.o2.co.uk/update/settings.html
Under Cellular Data Network
For Pay & Go customers. Tap APN and change idata.o2.co.uk and enter payandgo.o2.co.uk (Please note that "o2" needs to be written with a letter "o" and not a zero)
For Pay Monthly customers. Tap APN and change idata.o2.co.uk and enter mobile.o2.co.uk (Please note that "o2" needs to be written with a letter "o" and not a zero)
You don't need to change your username and password
Ignore the Visual Voicemail APN box - it's not available to Pay & Go customers or Pay Monthly customers (with a non iPhone tariff)
Under MMS
For Pay & Go customers. Tap APN and change idata.o2.co.uk and enter payandgo.o2.co.uk (Please note that o2 needs to be written with a letter o and not a zero)
For Pay Monthly customers. Tap APN and change idata.o2.co.uk and enter wap.o2.co.uk (Please note that o2 needs to be written with a letter o and not a zero)
You don't need to change your username and password
Turn your iPhone off and on again
If you're a Pay & Go iPhone customer, using your iPhone sim for the first time, you'll need to top up by at least £10.

IPhone 5 ios8.1.3 my Telephone Looses connectivity after Update ios

HEllo
i have a iPhone 5
after installier iOS 8.1.3 my phone is Creating problems.
im not able to telephone.
loosing connectivity.
what can i do?

Hello Elmasorun,
When you state you are losing connectivity, it sounds like a poor signal or interference.
Please go through the steps in this article for troubleshooting calls.
If you can't make or receive calls on your iPhone - Apple Support
Thank you for using Apple Support Communities.
Nubz

My wifi connection looses connection after 3 or more computers on

I have 1 Ipad 1 imac 1 iphone 1 windows netbook my 2 more laptops 1 xbox360 when all these are on one or 2 looses connections then I have to reset the router then it works any one with a tip thanks.

All of your devices must share the same bandwidth provided by your Internet connection from your Internet Service Provider (ISP). Your Internet plan may not provide you with enough bandwidth to support more than just a few connections at one time.
What is the speed of your Internet connection plan from your ISP?

Outlook looses connectivity after DAG Failover

Hi team,
Im running a lab environment with 2xCAS (WNLB) and 2xMBX (DAG) servers. Since it's a lab environment I've set the DC as my FSW. All Virtual Directories are pointing to 'mail.contoso.com' pointing to the two CASs which is WNLB'ed.
To test the DAG Failover I set up a Database(MDB01) on MBX Server 1 which is active, made a passive replica on MBX Server 2. I shut down Server 01, which holds the active databases mounted. meanwhile two clients were running and both were connected. Once
the server got shutdown, both clients(Outlook 2013) went to 'Trying to connect to server' status.
Meanwhile checking the powershell on the Mbx Server 02, i noticed that the database was mounted. Went back to clients and open'ed up OWA, working as normal. However, the outlook client is still stuck in the 'Trying to connect to server' status. And
i opened up the 'Connection Status' and tried to 'Reconnect' but still no luck. I had to close and open up outlook to get back into the 'Connected' mode.
Any idea why this might be happening?
*Since unlike Exchange 2010's CAS Array architecture is no more there I didn't made any changes to any RPCClientAccess.... attribute. Both mail.contoso.com and autodiscover.contoso.com are pointed to the VIP of the CAS WNLB.
Cheers!

Hello,
After you configure a single namespace, you need to restart outlook to connect the newly configured namespace.
Before DAG Failover, I recommend you use netstat -ano | findstr ":80" command to check your outlook connect to CAS server.
In order to check the issue, please do DAG failover again, and then use netstat -ano | findstr ":80" command to check your outlook connect to CAS server.
Additional article for your reference. (Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft
cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.)
http://exchangeserverpro.com/exchange-2013-client-access-server-high-availability/
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support
Hi Cara,
Yes, here's the result from the query.
[IMG]http://i57.tinypic.com/im01na.png[/IMG]
But whenever i restart the client it gets connected in no time. I'm confused in why after a manual DAG failover this happens.
Manual failover - I shut the active copy, the passive copy was also down for around 15 mins, booted up the passive server, it said Databases as Disconnected and Active Manager error in getting them mounted up and had a 99234343231 of CQL. So
to mark the server active did a 'net start clussvc /forcequorum'. This got the databases mounted up. But clients, they doesn't get connected automatically :(
UPDATE - The client got connected after like
15 mins. :s

Apple TV 2 loose connection after 20-30 minutes

When I’m waking up my ATV2, it always shut off after 20-30 minutes. The pattern is always the same.
I wake up my ATV2, I stream content to it using AirPlay (from my iPad) or I stream music from my shared library on an iMac using Wi-Fi and after 20-30 minutes, the ATV2 stop working. The TV screen has no connection (or data), the ATV2 light is on.
They only option that I have is to unplug and replug the ATV2. Then, it would work for hours (2-3-4 hours) without problem. I can listen to music or view content or use Airplay streaming with my iPad.
I have reserved DHCP addresses (using Aiport MAC address) for each devices (ATV2, iMac with iTunes), I tried to change the frequency channel (everything is Wi-Fi using a Time Capsule). All softwares are up-to-date (iTunes, ATV2 iOS).
The only thing I did not test is a cable between the Time Capsure and ATV2.
Any hint about what is going on and how to fix that?

Could be network activity. Try setting the sleep to never and see if that helps things.

Loosing connection after lock screen for ThinkCentre M70e

When locking the screen of the PC, it looses cable connectivity. What would be a fix for this situation?

Hi,
I am not one of the Moderators (They call them Hosts here)
I am one of the regular poster and here in iChat that tneds to mean I answer or post to most threads.
iChat has feedback option in the iChat Menu that leads here:-
http://www.apple.com/feedback/ichat.html
You will not get an answer or any confirmation that the Feedback has been received.
I am not sure abot the Automator option either.
I am not in a position to test it on my G4 at the moment.
NOTE. the "iChat Network" could refer to a Local Bonjour Network.
7:12 PM Wednesday; November 23, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Airport wireless loosing connection after sleep

Hi, everyone. every time that my macbook comes back from sleep it does not recognize my network, and start looking for all the networks in my area, so in order to reconnect i have to turn off airport and turn on and then it automatically connect and recognize my network, why is this happening.
please help, i am using airport extreme base station as my router.
Thanks

Try going to system preferences/network/airport and deleting all the unwanted old connections you have made in the past. Make sure the default is set to the top position of the few you decide to keep. By cleaning this up i found it always found the connection upon wakeup

Wi Fi looses connection after long sleep and the performs poorly after reconnecting

I am having trouble with the Wi FI dropping after a long sleep. Then after getting back on line trouble with pages loading slowly. This just started when I switched to Road Runner Lightning using a Ubee DVW 3201B modem/router. My service provider is Brighthouse. They suggested that the MAC firewall is the problem. Do I need the firewall with asecure router/ any help appreciated.

I have the same issue and have to cycle the wireless modem on the laptop. Doesn't matter if I'm on a preferred netowrk or no, or if I stay on the same network or move. I come out of sleep, I have to cycle the modem.
It's not life threatening, or anything, but it's a hassle. I didn't have the issue with Snow Leopard.

PXI 8252 looses connection

In a realtime application we have the problem to loose connection to firewire compact flash. The CF is just a backup - but the whole process of data storage ist stopped occationally. The system ist running perfectly for hours - but then we have cases where we loose connection after 5 to 30 minutes, without beeing able to identify a problem. Cable connections seem to be perfect, restart may solve the problem - but not always.
Does anybody have experiance with firewire card 8252 - or in combination with PXI 8102 (which could also be the source of the problem) - that could help to undserstand the problem?
PXI 8252 has three firewire ports (A,B,C) - could ONE of these be a problem while the others work reliably?

Hi, thanks for answering.
we use bus powered connection.
After some more local discussion I should say that we use three systems in parallel - but only one fails sometimes. The difference for the very system is that three threats are running (-> higher load) and that we use a bus extention, so there are some hardware solutions which may have some influence on the stability.
Thanks, regards
Volker

I have a new lion server and 4 lion laptops. The laptops loose connection to the shared documents and printers from the server after roughly 1 hour. By disconnecting and re-connecting wireless the connection is regained to shares and printers

I have a new lion server and 4 lion laptops. The laptops loose connection to the shared documents and printers from the server after roughly 1 hour. By disconnecting and re-connecting wireless the connection is regained to shares and printers. We can still surf the web when it goes down.

Ok 1st one. The warning restriction message relates to this line in main.cf:
smtpd_helo_restrictions = permit_sasl_authenticated permit_mynetworks check_helo_access hash:/etc/postfix/helo_access reject_non_fqdn_hostname reject_invalid_hostname permit reject_invalid_helo_hostname
The last reject occurs after the single word "permit" and is ignored.
However, that's not the problem.
I'm not exactly sure what's happening, but this might be a clue.
It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions. You might need to ramp up the debug level to get a better idea.
You could check if it's being created by "netstat -a | grep private/policy" in terminal.
My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up. Private/policy I think relates to grey listing. Maybe gives you a hint.

When i connect my ipod shuffle orange light blinks 4 times.. but after that it wont response.. it is not recognized by my computer and by i tunes as well.. after hours of charging it doesnt charge.. help me please????

helpwhen i connect my ipod shuffle orange light blinks 4 times.. but after that it wont response.. it is not recognized by my computer and by i tunes as well.. after hours of charging it doesnt charge.. help me please????

Even i have a same problem...

When i connect my ipod shuffle orange light blinks 4 times.. but after that it wont response.. it is not recognized by my computer and by i tunes as well.. after hours of charging it doesnt charge.. help me please???? iPod shuffle

helpwhen i connect my ipod shuffle orange light blinks 4 times.. but after that it wont response.. it is not recognized by my computer and by i tunes as well.. after hours of charging it doesnt charge.. help me please????
iPod shuffle

Even i have a same problem...

Printer loses wireless connection after some hours

Hello to all!
Printer is connected and I can see on the screen correct IP. Desktops with Win7 and Ubuntu are used. After switching on printer works properly, but several hours later its unreachable from both systems. Printer shows connection, I can see it in router web access tool, but it is unreachable. I have to switch off printer, reboot the router, then switch on printer - and it works. Not very comfort.
Does anybody know how to fix this bug?
This question was solved.
View Solution.

Hi @varspb,
Welcome to the HP Forums!
I noticed that your HP Deskjet Ink Advantage 6525 printer is losing wireless connection after some hours with Windows 7 and Ubuntu. I am happy to look into this connection issue for you!
For Linux support, please take a look at this website, http://hplip.sourceforge.net/.
Otherwise, please see the following guides:
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
HP Deskjet Ink Advantage 6520 e-All-in-One and HP Photosmart 6520 e-All-in-One Printer Series - Prin....
Tips for preventing wireless connection issues
The following tips can help prevent wireless connection issues:
Move the printer and the computer or access point (router) closer together.
Remove any metal objects between the printer and the computer or access point (router). Objects such as refrigerators or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals farther away from the printer. Devices such as microwaves and cordless telephones can interfere with wireless transmission.
Consult the router manufacturer for updates and configuration of your router.
Make sure that your computer is not connected through a VPN. You cannot access your printer on your wireless network while connected to a VPN.
Also, please take a look at this website, HP Wireless Printing Center - Troubleshooting Issues.
Hope this helps, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

GPS looses connection after hours driving on 2710

Similar Messages

Maybe you are looking for