GR and GI slip for MB1A?

To All
Can I configure more than one document type (WA, WE, WH, etc) per T-Code?
OMBA displays current document type but I cannot configure a GR and GI slip for T-Code MB1A
We need a GI slip output for mvt type 201 and 221 and a GR slipoutput for mvt type 202 and 222. Both mvt codes use MB1A.
Any ideas of how to configure?
Regards
Darren

Your ABAPer can surely help you with this ... ask him to provide you with smart forms depending upon the movement type

Similar Messages

Regarding Invoice and Payment slip both needs to print sub sequently

Hi Guys,
i have problem with smartform ,
the requirement was ,
invoice and payment slip both i need to develop using smartforms,
the thing is invoice will print on white paper(Portrait) and
payment slip will print on pre - printed paper (landscape) ,
subsequently it needs to print one invoice and payment slip for that invoice and
another invoice and payment slip like this in the sequence it needs to print .
this would be done by overnight job scheduling ,
how could i do this ,
what about output types and how can i proceed with technically please guide me .
urgent requirement ..help me out this .
Thanks & Regards
Vijay Kumar Reddy
+91-9789098418
[email protected]

Hi Dewang,
I have a different situation, I posted SD request at contract account level posted using FPSEC1.
Since the contract account is for purpose of Aggregation, I did a aggregated posting then when I prepare a print doc for the same using EA10_AGGRBILL it is not picking up the security deposit request.
I have maintained the necessary entry in Item Selection in Account Maintenance/ Define Sub-Items for RF clearing type.
Please advice.
Thanks
Satyajeet

Will apple swap out my ipo touch for free? I was trying to put it in my wristlet and it slipped out of my hand onto cement. It still works and there is no pieces missing out of te screen.

Will apple swap out my ipod for free bc I was putting it in my wristlet and it slipped out of my hand and fell on cement. It still works and there is no prices out Iliad the screen. It's only a week old.

As lllaass said, you'll have to go to the Apple Store and ask. Apple is not obligated to replace your iPod, since user-caused damage is not covered by warranty, but in some cases in the past a technician has made exceptions. Such exceptions, though, are reportedly becoming much harder to grant. But you can ask.
Regards.

Output for MB1A , MB1B and MB1C

Hi Experts ,
My client needs Output (Prinout) for MB1A , MB1B and MB1C , I would appriciate if anybody could guide me through correct procedure to set up .
Thanks in advance

Hi Greetings
Please find the following steps
1) Creation of Message out put type with application ME. You can use standard access sequence 0001
SPRO --> MM --> Inventory Management and Physical Inventory --> Output Determination --> Output Determination
2) Assigning the output type to Output Determination Procedures
SPRO --> MM --> Inventory Management and Physical Inventory --> Output Determination --> Maintain Output Determination Procedures
3) Maintaining Condition in Transaction MN21
5) User setting.
Transaction SU3 --> Parameters --> Parameter ID "NDR" --> Parameter value 'X'
Gobinathan G

Packing slip and address label for delivery

Hello all,
I have a business requirement where i want the delivery to generate packing slip and address label for delivery, once the TO picking is complete and updated in the delivery.
My first question - I would like to the configuration steps involved in making the delivery to print the required output types automatically .
and my second question is how the SAP system can be configured to make the delivery print the packing slip and address label for delivery automatically once the Picking status is updated in the delivery.
Thanks,
Maxx

Hi Max,
You have to carry out your settings in:
SPRO > LE > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Outbound Deliveries
1) Maintain Access Sequence
- you should have a valid access sequence with proper the condition tables
2) Maintain Outout Types
- you should have an output type with proper settings: print progrm, samrtform (or spascript, etc), etc
- you output should be assigned to the proper access sequence
3) Maintain Output Determination Procedure
- you should have a valid procedure --> you have to assign your output type to the procedure
- in field V_T683S_XX-KOBED you have to define a requirement type for your output type (that contains an ABAP code). This ensures that the output type will be generated only if the conditions defined in the ABAP code are met.
4) Assign Ouput Determination Procedure
- You have to assign the procedure to the delivery type you use
Master Data
If your configuration is OK, you can create the output determination condition record in VV21:
- you have to choose the proper key table
- you have to define the proper conditions
- you have to define the printer
- you have to define number of outputs
- etc
SPRO > LE > Shipping > Basic Shipping Functions > Output Control > Output Determination > Define Requirements
- Here the programmer can define the Requirement Type that can be assigned to the output type in the procedure.
- You can use e.g. VBUK-PKSTK to check the packing status (VBUK-VBELN=LIKP-VBELN)
All the mentioned settings (config, master data) can be done in transacton NACE also (except writing the ABAP code).
Regards,
Csaba

User exit for MB1A screen

I want to block the withdraw qty in MB1A screen.I used MBCFC003 AND MBCF0005 BUT I couldn't get the exact result.Is it user exit for MB1A screen -PPC00009.So can anyone tell me the exact user exit.
Regards,
Maran.d

Dear Maran,
What's your exact requirement?What do you want to block in MB1A T Code?
You want to restrict for 261 movement for an order or reservation in MB1A?
These are the exits that can be used for MB1A,
MB_CF001                                Customer Function Exit in the Case of Updating a Mat. Doc.
MBCF0011                                Read from RESB and RKPF for print list in MB26
MBCF0010                                Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0009                                Filling the storage location field
MBCF0007                                Customer function exit: Updating a reservation
MBCF0006                                Customer function for WBS element
MBCF0005                                Material document item for goods receipt/issue slip
MBCF0002                                Customer function exit: Segment text in material doc. item
Regards
S Mangalraj

Goods Receipt Collective Slip for Mat Doc is not printing

HI All,
I have a strange issues. I'm trying to print collective slip for Goods Receipt which is created against of PO.
I able to print Individual Slip when i create GR(Mat Doc) against PO with movement type 101. But I'm not able to print the Collective Slip when I create GR(Mat Doc) against PO with movement type 101. I'm saving the GR document by selecting collective slip. Error I'm getting is "The system could not create Output".
I check the condition records in MN21, condition record is in place.
I check in OMB5, for movement type and material document configuratio its there.
I check in NACR, condition record is there.
I found that In table NAST, entry for GR document created using collective slip is not available, but Individual slip GR Doc entries are there in NAST table.
any help on this matter is highly appreciated.
I check in SDN, Googled it, but no result.
Thanks in Advance.

check this
2. Before you set up the output determination, you have to run the program RM07NCUS for each client in which you want to use the output determination function.
This program copies the basic settings from the SAP standard client (000).
from there:
http://help.sap.com/saphelp_46c/helpdata/en/ed/6cec6eb435d1118b3f0060b03ca329/content.htm
and check you have define some printer for the output.

Print GR slip for GR against an Outbound Delivery

Dear Experts,
I have a requirement as below.
Need to print GR slip for GR against an Outbound Delivery in VL02N (for Return Orders)
What setting needs to be done?
I donot see the GR slip check box in VL02N which normally exists in MIGO
However, i need to print GR slip for such GRs in VL02N
please help
regards,
Shetty

Re: Printout during Goods Receipt
See second, fourth reply and final post (which you've already found answer to via another thread).
Regards,
Nick

Control G/L account and Cost Center for movement type 251

Dear Friends,
I would like to use mov. type 251 for GI for sale and like to control over G/L account and Cost center.
The G/L account is by default from the valuation class of the the material and if the user will enter wrong G/L
we had done the customising in OMJJ movement type 251 - Account grouping - Unchecked the check box of column
"Check account assignment" - Impact is " the system always uses the G/L accounts or account assignments determined automatically"
I also made default cost center for G/L account and plant wise through OKB9.
Now I would like to suppress/dispaly the G/L account and cost center - for same I had done Setting in Entry control menu of OMJJ for 251 of field Account control - Value - "-" field is suppressed. But it is not working.
Please advise to solve this situation.
Thanks & Regards
Rajan

Dear Rajan
Yes, I have checked in MB1A earlier. We have separate node for Field seletion layout for Enjoy transaction MIGO for mvt type in which the G/L account (KONTO) an Cost center (KOSTL) have only optional or required entry selection.
warm regards
Ramakrishna.

Empty table with multiples rows and 2 columns for processing data

Hi,
I am very new to adobe forms. I have the requirement that the user will enter some data in the table rows and I should process them to update in a z-table as well as use that data for MB1A tcode. I am not sure what to use here. Which is the best. I dont know anything about webdynpro. Can it be done directly in SFP transaction without using web-dynpro?
Also if I need more rows I should give them the option to add rows. How does the submit button work here when the user enters the data in all the 10 rows.
I heard about web services and I know a little about it, can it be achieved though that? Please help me. I need to finish 4 forms like this and each form should take me to the next form level.
Kaps.

Hello!
You don´t have to tell me, I am the ABAP developer as well. I know that there is very little like ..."career" value in learning scripting in some obscure languages like Java script or Form Calc for Adobe forms. But trust me, you won´t have to learn much. You will have to learn how to manipulate the presence of form fields (or variable values, but that is the same like setting the presence to hidden, you only pass a constant or any other value).
In the mentioned guide, in the last chapter you can just copy and next paste the ready to use scripting bacis. I think you should find the add/ remove row scripts there as well.
The right scenario is not always easy to pick, consider this:
- how many forms at the same time will the user have to fill? (if one --> offline, if more --> portal/ WD)
- do you want the user to work with the NW portal? do you have licenses for the new users? (WD)
- how often will the people fill their forms? how important the processes are? how many values will come from the backend tables (like how many search helps you would use if you can)
etc. etc.
Hope that clarifies things a little for you
regards Otto

Table control bdc for mb1a

Hi All,
Can anyone tell me is table control BDC possible for MB1A tcode
Thanks in advance.

well there may be 2 cases,
1. if ur batch manahement is active and the batch is determined internally,in that case it is not possible.
2.However if ur batch management is not active,then a bdc can be written.
But i would suggest u use an LSMW and record using the BAPI method,SAP provides good standard BAPI's.

Set up the output GR slip for RE (customer return) Order Type

Dear Experts,
I need to set up the output GR slip for RE (customer return) Order Type
Kindly let me know how can I do this in SAP
Regards
Shetty

Hi,
As I understand your question, you need to set up an output type for printing Goods Receipt in Sales Order (RE) - perhaps when the RE order is saved. For this, you can follow the following steps. Also you need to take the help of an ABAPer to develop a form which prints as per your requirement.
For configuring the output, follow the steps
a. Go to SPRO>Sales and Distribution > Basic Function > Output Control > Define Output type.
b. Create a new output type (Eg: ZTRE)
c. Create a new Access Sequence and put in the required condition tables... The Key combination may be Document Type / Customer or Document Type / Sales Orgnaization / Distribution Channel. etc.
d. Assign the access sequence to the new output type.
e. Create a new ouput procedure and assign new output type to it.
f. Assign this new output procedure to the document type.
g. In Tcode: VV11 maintain the condition record for Output type ZTRE.
When the output type is created, a form and a program needs to be assigned to it so that the requirement of GR slip gets printed. You have to take the ABAper's help for the same. You have to mention the fields which have to be printed on the GR Slip. You can do the same for delivery document as well.
Else you can go to Tcode: NACE to do the same configuration. You have to select V1 for Sales documents.
Hope this answeres your question
Thanks
Mukund S

Business scenarios on SD and MM modules for generic datasources and enhance

Hi,
Can anybody send some documents on SD and MM module on generic datasource and on enhancements.Pl send it to my MailID:[email protected]
Thanks,
Chinna

Hi,
MM Process flow:
The typical procurement cycle for a service or material consists of the following phases:
1. Determination of Requirements
Materials requirements are identified either in the user departments or via materials planning and control. (This can cover both MRP proper and the demand-based approach to inventory control. The regular checking of stock levels of materials defined by master records, use of the order-point method, and forecasting on the basis of past usage are important aspects of the latter.) You can enter purchase requisitions yourself, or they can be generated automatically by the materials planning and control system.
2. Source Determination
The Purchasing component helps you identify potential sources of supply based on past orders and existing longer-term purchase agreements. This speeds the process of creating requests for quotation (RFQs), which can be sent to vendors electronically via SAP EDI, if desired.
3. Vendor Selection and Comparison of Quotations
The system is capable of simulating pricing scenarios, allowing you to compare a number of different quotations. Rejection letters can be sent automatically.
4. Purchase Order Processing
The Purchasing system adopts information from the requisition and the quotation to help you create a purchase order. As with purchase requisitions, you can generate Pos yourself or have the system generate them automatically. Vendor scheduling agreements and contracts (in the SAP System, types of longer-term purchase agreement) are also supported.
5. Purchase Order Follow-Up
The system checks the reminder periods you have specified and - if necessary - automatically prints reminders or expediters at the predefined intervals. It also provides you with an up-to-date status of all purchase requisitions, quotations, and purchase orders.
6. Goods Receiving and Inventory Management
Goods Receiving personnel can confirm the receipt of goods simply by entering the Po number. By specifying permissible tolerances, buyers can limit over- and underdeliveries of ordered goods.
7. Invoice Verification
The system supports the checking and matching of invoices. The accounts payable clerk is notified of quantity and price variances because the system has access to PO and goods receipt data. This speeds the process of auditing and clearing invoices for payment.
Common Tables used by SAP MM:
Below are few important Common Tables used in Materials Management Modules:
EINA Purchasing Info Record- General Data
EINE Purchasing Info Record- Purchasing Organization Data
MAKT Material Descriptions
MARA General Material Data
MARC Plant Data for Material
MARD Storage Location Data for Material
MAST Material to BOM Link
MBEW Material Valuation
MKPF Header- Material Document
MSEG Document Segment- Material
MVER Material Consumption
MVKE Sales Data for materials
RKPF Document Header- Reservation
T023 Mat. groups
T024 Purchasing Groups
T156 Movement Type
T157H Help Texts for Movement Types
MOFF Lists what views have not been created
A501 Plant/Material
EBAN Purchase Requisition
EBKN Purchase Requisition Account Assignment
EKAB Release Documentation
EKBE History per Purchasing Document
EKET Scheduling Agreement Schedule Lines
EKKN Account Assignment in Purchasing Document
EKKO Purchasing Document Header
EKPO Purchasing Document Item
IKPF Header- Physical Inventory Document
ISEG Physical Inventory Document Items
LFA1 Vendor Master (General section)
LFB1 Vendor Master (Company Code)
NRIV Number range intervals
RESB Reservation/dependent requirements
T161T Texts for Purchasing Document Types
Transaction Codes:
RFQ to Vendor - ME41
Raising Quotation - ME47
Comparison of Price - ME49
Creation of PO - ME21N
Goods Receipt - MIGO
Invoice (Bill PAssing) - MIRO
Goods Issue - MB1A
Physical Inventory - MI01( Create doc)
MI04 (Enter Count)
MI07 (Post)
Also please check this links.
http://www.sapgenie.com/sapfunc/mm.htm
http://www.sap-basis-abap.com/sapmm.htm
SD Process Flow:
The sales documents you create are individual documents but they can also form part of a chain of inter-related documents. For example, you may record a customers telephone inquiry in the system. The customer next requests a quotation, which you then create by referring to the inquiry. The customer later places an order on the basis of the quotation and you create a sales order with reference to the quotation. You ship the goods and bill the customer. After delivery of the goods, the customer claims credit for some damaged goods and you create a free-of-charge delivery with reference to the sales order. The entire chain of documents the inquiry, the quotation, the sales order, the delivery, the invoice, and the subsequent delivery free of charge creates a document flow or history. The flow of data from one document into another reduces manual activity and makes problem resolution easier. Inquiry and quotation management in the Sales Information System help you to plan and control your sales.
Transaction Codes:
Inquiry - VA11/VA12/VA13
Quotation - VA21/VA22/VA23
Sales Order - VA01/VA02/VA03
Delivery - VL01N/VL02N/VL03N
Billing/Invoicing - VF01/VF02/VF03
Also please check this links.
http://www.sapgenie.com/sapfunc/sd.htm
http://www.sap-basis-abap.com/sapsd.htm
http://www.sapgenie.com/abap/tables_sd.htm
Production Planning:
For example, consider a pump manufacturing plant, based on the customer requirement, planning is done for future months ( we plan for a qty on particular
date). Pump is an assembly - were main component would be manufactured in the plant and others would be procured. As PP, we are concerned only in the inhouse
manufacturing but the final assembly (considering BOM) can be done only if the procured components are available. MRP helps in planning the shortage, on
particular date based on the planned date. Work center (ex. lathe) place the components are machined/assembled (were the operation is done). Sequence of
operation is routing (lead time scheduling data is got from routing). In the MRP Run,basic or lead time scheduling (need to know when to start/finish date)
is done. On creation of the production order, system checks for which BOM and routing to be picked up (if there are many routings or BOM for that particular
finished product). Availabilty checks for material,PRT and capacity needs to be done. on release of the order, confirmation of the order can be done (on
completion of the order or after manufacturing the quantities). GI and GR have to be done.PP flow ends here
step 1: creation of master data (Material master,BOM,Work center,Routing)
step 2: Planning - can be done by Planned independent requirement (MD61), Independent requirement (MD81).
we plan for a quantity, on which date (it would be finish date).
step 3: MD04 -stock/requirement lsit (plan made can be viewed in MD04)
step 4: MRP run - MD02, PIR is converted into Planned order
step 5:Planned order to be converted production order - CO40, CO41
step 6: production order to be released - CA02
step 7: confirm the production order (order confirmation-CO15 (after which GI and GR is done)
assign pts if helpful...

Can a pick slip for ingredients, be generated, while processing a batch.

Dear All,
I have a question:
While releasing a Batch, can we issue a Pick Slip for the ingredients to be picked.
As, how my store keeper will come to know that which are all the ingredients (raw materials) required at Plant (shop floor).
Please reply at the earliest..
Thanks & Regards
Sameer

Hi
My answers to your thoughts/queries
1. Bang on. Go for a separate FG warehouse (however the process at the site) can decide wether production should be directly stored in FG or transferred via a move transaction
2. Avg. Cost is ok in OPM. However, bear in mind dont have an open batch at the end of a month (or might land up with CLS entries which are quite difficult to explain). This is true if you are using PWAC method of costing. Search for OPM SSTK and search a white paper in Oracle that explains this. I will try to search this and give you something (if I can though honestly I am not sure I will find it)
3. Not sure of the kind of documents between inventory and plant you are looking at?
4. Upto 11.5.10 you cant do the same as per my understanding. I havent ever see this. You can tough use a DFF and catpure the same in the header and built a customization report for cross refercing the same. I belive in Release 12 this feature has been introduced. I think I have updated this on another query
Thanks and Regards
Girish

No Acct Document with BAPI_GOODSMVT_CREATE & BDC Recording for MB1A 221Q

Please see my posting @ Re: BAPI_GOODSMVT_CREATE or BDC for MB1A not creating Accounting Doc
It seems that I can do a 221Q direct via MB1A successfully and generate a Material Doc & an Accounting Doc. I'm not using reference to Reservation / PO, but obviously I have to provide my Cost Center & Order#.
If I create a BDC Recording from this same successful dataset and process the BDC "in the foreground", I get the Material Doc but the Accounting Doc is not created. The same problem occurs in the Background.
I also get this very same issue if I use the data in a call to BAPI_GOODSMVT_CREATE directly, followed by a BAPI_TRANSACTION_COMMIT.
I can't quite figure out what the issue is, since if I'm using the same data as in the successful MB1A direct posting and creating a BDC recording from the very same data/screen sequence, shouldn't the Accounting Document be created?
Many thanks..

what error you are getting..? and are you able to post them separately .

GR and GI slip for MB1A?

Similar Messages

Maybe you are looking for