GR/IR Balance Pending

Dear Experts
in the case of only imported item PO.
Pl tell us whenever we r checking the GR/IR Balance System MB5S is showing the Balance Qty , instead of i have Clear the IR with respect to  GR with same qty & Amount . but still its showing it Pending in MB5s , and asper suggestion i have release the invoice from MRBR  and released the invoice but still its showing in the GR/IR  MB5s.
what would be there for update the list.
Rgds
Pankaj Agarwal

Dear All
Actaully System is taking some ACD & Hess Sec H ess entry Due to this system is not clearing the Document From The MB5s.thatwhy the system is not clearing the PO with GR & IR equal qty .
what should entry Passed by the system sothat Ecess , Hcess , which is basically goes on Inventory.
Rgds
Pankaj Agarwal
Edited by: Pankaj Agarwal on Feb 9, 2009 11:07 AM

Similar Messages

  • PE51 - Displaying LTA Balance Pending in Pay Slip

    Hello ,
      I have created a new Pay Slip Using transaction PE51. In that Pay slip I have to Display LTA Balance pending with that employee for this year which he/ she can claim. I tried to find Wage type for it , but I was unable to.I hope their is no wage type to find LTA Balance pending.
    Now how could I display LTA Balance pending in my Pay Slip.
    Please Help.
    Thanks in advance.,

    Create a LTA balance wage type and by writing rule pass amount into wage type and then assign wage type in payslip

  • Report of Balance GRs for a particular period.

    Dear Gurus,,
    How can I generate a report of balance/pending GRs for a particular period for invoice parking.i.e Materials recd.,GR prepared but Invoice is not recd.or parked againest such GRs.
    Thanks

    Hi
    Try with ME2N or ME2M or ME2L with selection parameter RECHNUNG - open invoice.
    Thanks/karthik

  • Customer Balance

    Hi
          I want report which should list customer balances pending like aging report . I was seeing Aging report in which it was showing some amount in ().  What does it mean . How we can get list of only those customers whose payments is due.
    Thanks

    Hi,
    In Customer Receivables Aging report is showing only whose payment is due and if you ticked "Display Customers with Zero Balance" check box then display all customers. And showing amount in () bracket means that customer paid you amount in advanced which not allocated to any invoice.
    Thanks
    Sachin

  • Balance Qty for inbound

    Hi All,
    Can we find the inbound  qty balance pending for migo in sap.Is there any table which will store the balance qty of inbound.
    Thanks in advance
    Basu

    Hi experts,
    Please help.

  • Why do I keep getting an error when trying to buy gift certificates

    I keep getting an error message saying "This purchase would exceed the maximum Gift Certificate purchase amount for this Apple ID."
    1) Who ever knew there was a limit. Where was it, if ever, disclosed? Why does it even exist?
    2) Is it a limit on the Purchaser's ID or the Recipient's?
    3) What are the parameters of this limit? Is it $xx/week, /mo, total credit balance, pending transaction limit, lifetime gift certificate allowance? This error is terribly vague.
    4) Other options available to me.

    sorry that meant to read i DID cut and paste some pictures into my document.

  • FM for Credit check

    Hello all,
    Can anyone tell me if there is a FM or a BAPI for performing a Credit Check for given customer.
    Basically, if a customer is blocked for Credit there can be two scenarios (in our case)
       1. Overdue balance (Pending payment has exceeded the Credit Limit)
       2. An payment overdue is past the 30 (or 60, 90...) credit term
    I need to check a customer and give appropriate message in my program based on above scenarios.
    Thanks,
    Amit Purohit.

    Hi Amit,
      Check out these function modules.
    CO_IH_ORDER_CREDIT_CHECK
    FKK_CR_PERFORM_CREDIT_CHECK
    ISMAM_CM_ORDER_CREDIT_CHECK
    SD_ORDER_CREDIR_CHECK
    SD_ORDER_CREDIT_RECHECK
    SM_ORDER_CREDIT_CHECK
    Hope it helps!
    Much Regards,
    Amuktha.

  • Why is the money i received from a buyer not in my pending balance? PLEASE HELP

    I shipped an item to a buyer internationally who paid me through paypal. I recieved a message from paypal saying that the payment is in my pending balance and temporarily unavailable. The money would be available to me in 24-34hrs. I went and checked my pending balance or availability a day after and both had a balance of $0.00. I made sure that I sent a sent a picture of my reciept the same day I shipped the item to an email that was given to me (within the email of confirmation that I mentioned above) so the payment could be released. I also have not recieved an email saying the payment was cancled. I am confused as to where the money went. I checked my information and it was all correct. Can anyone help me please? I am not sure what to do.  Shipped item: 7/27/15USPS international: 3-5 days business daysPayment was over 1,000

    THIS IS A TYPICAL PAYPAL SCAM.
    They encourage you to use paypal and often ask you to send the item as a gift to a relative somewhere often Nigeria.
    You will get/got a "fake" email that looks as though it is from paypal.....it isn't.
    It will say the buyer has paid ...you won't have been paid.
    They will tell you that the payment is released when you provide paypal with a tracking/shipping number......this won't happen.
    They also threaten legal action...have a laugh at that one and ignore it as its rubbish.
    Paypal NEVER tell you to send trackable, they advise it for seller protection etc but it is not compulsory.
    Paypal NEVER tell you to send an item before the payment is showing in your paypal account.
           **************************************** I give up my time to help you so a thank you or kudos would be cool.
    Marking one of my replies as a solution would be appreciated if I sorted your problem.  

  • Pending  GR / IR Balances report  for a given period

    Hi,
              How can you  check  pending  GR / IR doc's  for a given  period ?  In  MB5S there is no date field in selection sreen as well as output  layout. 
    Please  give  suggetions .
    Thanks &  Regards,
           Aruna.

    Hi,
    Check ME2l, ME2M report..use Selection Parameters as "RECHNUNG" for pending IR and "WE101" or "WE103"  for open GRs and ur required selection of vendor, material and document date
    Regards,
    Vikas

  • How to clear balance qty pending at vendor end

    Hi Gurus,
    I have checked the report MBLB there is lot of unrestricted material. This is actually losted material, Kindly let me know how i can clear this pending material. The SAP shows this material but actually material does not exist physical.
    Regards,
    ViAngrish

    This is actually losted material
    What i mean from above term is material is scraped @ subcon while processing,
    then do 551 'O" using MB1A to issue stock from subcontractor,Check it in devlop. server,before applying it in live datas.

  • Credit balance $21.82 pending for a month

    Verizon Account Number - 
    {edited for privacy}
    I cancelled my  verizon FIOS account in early October and returned my equipment. I have a credit balance of $21.82 on my december statement and would like to get that refunded to my credit card account on file. Can you please get this done asap?
    Monterey01

    Hi monterey01,
    Just a friendly reminder, this is a forum where users help other users. It looks like your issue may require a Verizon representative to review your account details. Please visit our Support page for a variety of ways to contact Verizon, including “Ask Verizon,” our virtual chat agent, and customer support phone numbers.  For billing questions please contact Verizon during normal business hours.

  • T code for service contract pending balance

    Hi ,
    I want to see the amount balance in a service contract . what t code or report to use to see the actual cost remianing in the service order

    hi
    me2s--po report with services
    reward me if u got the answer
    thanks and regards
    ram

  • Picking the value of PBEG and PEND incase of multiple entries 2002 on a day

    Hi Experts,
    Our client's business requirement is to have provision handling multiple entries multiple entries of same subtype of IT 2002 on same day with different Time entries.For example one IT 2002 Styp 1 has entry 10 am to 14 pm & other entry of IT 2002 styp 1 as 14 pm to 16 pm.
    In this scenario I want to have TWT with start time of 1st 2002 record i.e 10 & another TWT with end time of last 2002 record i.e. 16.
    I have written a PCR as
    OUTTPORIGS Origin status
        COLOP*     TIP  >TOP curr.TType
      P
        HRS=PBEG   Set
        ADDDB90T3  Add to day balance
        HRS=PEND   Set
        ADDDB90T4  Add to day balance
    But its giving me value of 2002 start time  as (1014=24) & END time (1416=30) respectively.
    Since TIP will have entries with origin E & A as well with P  and any entry can be 1st or last entry depending on time, I can't use VRSTFIRST & VARSTLAST.
    Please suggest me how to handle such scenario through PCR. Is there a way we can make decision on From & To of TIP entries.
    You can also suggest me if such need can be handled at masterdata level so that we can have just one entry
    Regards
    S S
    Hi All,
    Please also suggest me a better operation to pick the value of PBEG and PEND incase of multiple entries various subtypes of 2002 on same day.I need to compare start- end time of 2002 with 2011 entries and calculate total attendence hrs. Once again, I can't use VRSTFIRST & VRSTLAST as 1st & last TIP entry could be come from any infotype viz 2011,2002, 2001.
    Regards
    Sunita
    Edited by: Sunita on Feb 5, 2011 10:02 AM

    If you want to do it the T-SQL way, follow this article I wrote on deleting duplicates..
    http://sqlsaga.com/sql-server/how-to-remove-duplicates-from-a-table-in-sql-server/
    To read about what ranking functions does and how will they help you use this link..
    http://sqlsaga.com/sql-server/what-is-the-difference-between-rank-dense_rank-row_number-and-ntile-in-sql-server/
    Please mark as answer, if this has helped you solve the issue.
    Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

  • Report for showing pending (ageing) quantity according to store location w

    dear ABAP Gurus,
    I have made a roport for showing pending (ageiing) quantity acc to location wise.
    and i m sending here the code i made for same.Tell me if sme amendments required.
    Report for showing pending (ageing) quantity according to store location wise:   
    1.     Fields on selection screen (input screen) : Plant code From to , Material code From to , Current date, Numbers of days(for display the ageing(pending) balance for a given period,Storage locations from to.
    2.     Field in the output List : Material code , Material descriptions, Balance quantiy,Balance value ,Consumptions date. 
    the code is:
    REPORT  ZAGEIN_SUDHA.
    TABLES: mara,mseg,makt.
    TYPES: BEGIN OF t_mara,
    matnr LIKE mara-matnr,           "material number
    maktx LIKE makt-maktx,           "material description
    ersda LIKE mara-ersda,           "material creation date
    lgort like mseg-lgort,           "storage location
    bwart like mseg-bwart,           "goods received or issued
    menge like mseg-menge,           "value at movement type
    werks like mseg-werks,           "plant
    END OF t_mara.
    DATA: i_mara TYPE STANDARD TABLE OF t_mara with header line,
          itab type standard table of mara with header line,
    *wa_mara TYPE t_mara,
    v_date TYPE i,                      "age in days
    GI type mseg-menge,                 "goods issued
    GR type mseg-menge,                 "goods received
    bal type mseg-menge,                "balance
    total type i,
    grace type i,
    g_quan type mseg-menge.
    SELECTION-SCREEN BEGIN OF BLOCK b1.
    SELECT-OPTIONS: p_matnr FOR mara-matnr.
    select-options: p_werks for mseg-werks.
    select-options: p_lgort for mseg-lgort.
    SELECTION-SCREEN END OF BLOCK b1.
    START-OF-SELECTION.
    REFRESH i_mara.
    SELECT mr~matnr                        "mara-matnr
    mk~maktx                               "makt-maktx
    mr~ersda                               "mara-ersda
    mg~lgort                               "mseg-lgort
    mg~bwart                               "mseg-bwart
    mg~menge                               "mseg-menge
    INTO corresponding fields of table i_mara
    FROM mara AS mr INNER JOIN
    makt AS mk
    ON mrmatnr = mkmatnr INNER JOIN mseg AS mg on mkmatnr = mgmatnr
    WHERE mrmatnr IN p_matnr and mgwerks IN p_werks and mg~lgort IN
    p_lgort.
    total = 0.
    IF sy-subrc = 0.
    *CLEAR wa_mara.
    LOOP AT i_mara.
    if i_mara-bwart = '101' .
    GR = total + i_mara-menge.
    total = GR.
    elseif
    i_mara-bwart = '102' or i_mara-bwart = '122'.
    GR = GR - i_mara-menge.
    endif.
    if i_mara-bwart = '261'.
    GI = total + i_mara-menge.
    elseif i_mara-bwart = '262'.
    GR = GR + i_mara-menge.
    endif.
    bal = GR - GI.
    if bal GE  GR.
    grace = 30.
    else.
    grace = 10.
    endif.
    g_quan = bal - GR.
    v_date = sy-datum - i_mara-ersda.
    endloop.
    WRITE: / i_mara-matnr ,i_mara-maktx,' is ',v_date,' ,days old  and
    stored at' ,i_mara-lgort ,   ' with balance =', bal ,'the grace time is
    ', grace, 'and' ,'grace quantity is ' ,g_quan.
    *ENDLOOP.

    Hi,
    That sounds like a nice report.  What about it?!
    Gareth.

  • Open Payable,Receivable & Trial Balance!!

    Hi Guys,
    I need your help in Trial Balances.
    Our company has aquired a small firm which does not use Oracle ERP.
    Now we are planning to merge them under Oracle EBS.
    My question is what information do we need to bring related to their
    trail balances so that we can reconcile GL with AP,AR & INV.
    1) Open Sales Invoices
    2) Open Payable
    3) Advance Payment
    is there any GL component related to this to be brought in??
    Thanks in advance
    Prashant Pathak

    1) Open & Pending PO
    No Accounting impact unless you have encumbrance. So you do not have to worry.The only thing you need to worry about is definition of open PO. If PO is received but not yet billed you ought to have accrual balance in your old system (assuming accrual basis of accounting). If you convert these POs, when invoice is matched to this PO (this is no receiving expected as goods are in inventory or consumed), you have to make sure to use the accrual account (it should default). It is kind of a mess as you have to train people carefully to look for holds, which one is received earlier which one is received now and so on. Ideally the value of these POs+AP invoice value conversion with the accrual account should match with you accrual balance in your GL conversion.
    2) Open & Pending SO
    No accounting impact.
    3) Open & Pending AR,AP Invoices ( may be we might close Open invoice's in old system)
    AP for liability and distribution accounts, I think you should use actual liability account and reclassify later in GL (reclassify the one that was converted in GL) and for the charge account, you should use dummy accounts as the account could be accrual or actual department charge account. As this will be coming in GL, just make sure that the values match.
    4) Open & Pending Receipt
    Not sure whether you will be using a dummy bank account or actual one (accounting for cash and clearing are derived from the receipt classes) for converting these receipts. If cash gets converted in the GL into actual cash account (sensitive topic and highly individualistic to each implementation), then you have to use dummy cash account. If not in GL you have to use dummy cash account.
    5) Customer
    No accounting impact
    6) Vendor
    No accounting impact
    7) Item
    No accounting impact
    8) On Hand Inv ( what about the cost of this inventory? How do we tackle this in GL?)
    In inventory when we covert we have no choice in choosing the material account (inventory account) as it is taken from organization (average cost) or subinventory (standard cost) so on. Hence we cannot change that. The only thing we can change is the account we pass while doing on-hand conversion. Usually we call this guy as Inventory Clearing account. Depending on your set up (different inventory accounts for different organizations) you have to use different clearing accounts.
    So in inventory conversion you generate
    Dr Inventory account
    Cr Inventory Clearing Account.
    In GL you bring in the value of inventory account into Inventory clearing account. When you transfer from inv to gl, clearing account gets squared off.
    Thanks
    Nagamohan

Maybe you are looking for