Grand Total in Rows of Pivot Table

Hi,
How to display Grand total in rows of pivot table.
Thanks and Regards,
Kiran

Hi,
Now i got your question.
No, its not possible to add aggregation for the measures.
Instead you need to create some two dummy dimension table and use them in the pivot table and hide them.
NOTE- We need to have two dummy dimension tables because then only summation symbol would come for the first dimension.
And so it will appear you are doing a summation on the measure column.
Regards
MuRam
NOTE: Please mention if this resolved your problem/still facing and close the thread.

Similar Messages

How to show grand total at bottom in Pivot view?

Hi All,
How to show the report Grand total at bottom in pivot table?Plz help.
Regards,
Vaishnavi

Hi ,
Thanks for the reply but My report structure is like below:
AAA,BBB,CCC,DDD,EEE,FFF,GGG,HHH & III my report columns.I have arranged those columns in measure & i have to calculate the variance against each column like below structure.As per the report here I have lto calculate variance for 4 columns like AAA,BBB,CCC,DDD & after that total of each..then again variance for EEE,FFF & their total.After that i have to show grand total of all from AAAA to FFF likewise for rest of fields.
Measures           variance
AAA(db column)          1
BBB(db column)          2
CCC(db column)     3
DDD(db column
Total     6
EEE(db column)     4
FFF(db column) 5
Total     9
Grand Total(AAA TO FFF)     15
GGG(db column)     6
Total     6
Grand Total(AAA TO GGG) 21
III(db column)
Grand Total(AAA TO III)
How to do that?
Regards,
Sonal
Edited by: Sonal on Jan 11, 2012 9:06 AM
Edited by: Sonal on Jan 11, 2012 9:15 AM
Edited by: Sonal on Jan 11, 2012 9:17 AM

Hide rows in Pivot table Calculated Items in OBIEE 11g

Hi All,
I have requirement to show values in Pivot table such that values are divided into two sub totals and also shown in Grand Total.
For Sub Total 1, all the rows can be shown with Sub total value. But for Sub Total 2, only Total value is to be shown but not all the rows. How this requirement can be done?
I tried to hide the rows in Sub total 2, but its effecting entire table so those rows are removing from Sub total 1 aswell which should not happen.
Have look in below table for more clarity. My output should be as shown in Table 2 not as in Table 1.
Table 1:
Q1
Q2
Q3
Q4
Geography
Type
Asia
T1
100
200
300
400
America
T2
110
210
310
410
Europe
T1
120
220
320
420
SubTotal1
330
630
930
1230
Asia
T1
10
20
30
40
America
T2
15
25
35
45
Europe
T1
20
30
40
50
SubTotal2
45
75
105
135
Grand Total
375
705
1035
1365
Table 2:
Q1
Q2
Q3
Q4
Geography
Type
Asia
T1
100
200
300
400
America
T2
110
210
310
410
Europe
T1
120
220
320
420
SubTotal1
330
630
930
1230
SubTotal2
45
75
105
135
Grand Total
375
705
1035
1365
Any ideas how this can be done??
Thanks for your time.

Hi,
Thanks for the reply.
Here Subtotal will sums up the rows basing on other column (Dimension).
SubTotal 1 sums the rows basing on the another dimension( value A and value B). SubTotal 2 sums the rows basing on aother values(values C and values C.
I understand the above solution, but that is not enough to my requirement as I need to show Regions for Subtotal 1, but not for Subtotal 2. And these Subtotals are based on another column (other than Regions).
Hope this is clear now.

Rows in Pivot Table of answers

Hi Gurus,
I want to show row in pivot table from count of some values in perticular column and also want to show row as pivot table some values in perticular column
Suppose we have values a,b,a,c in column i want to show 2(that is count of a) in below of this column
Please suggest me is this possible?
Thnaks in advance

Col1 | Col2 | Col3 | Col4 | Col5 | Col6 | Col7|col8
abc | kafj | 4 |     4 | True | jdj |     2 | 2
bcd | asfj | 4 |     4 | True | sfa |     4 | 4
asd | asda | 1 |     1 | False | sda |     2 | 2
cde | Iruei | 5 |     5 | False | sdfs |     1 | 1
Count| 4 | True | 2 |True     | 50% | True|66.67%
|Req | |Req% | | Rate|
On True | 6 | Total | 9
Count | | Count|
Hi venkat,
I want to display the following pattern of output.
In the above table format
Count 4 is the count of total number lines in col2.
True Req count 2 is the count of true lines in the column 5.
True Req% 50% is col2/col5.
On True Count is the count of (2+4 in col7) when condition is True.
Total Count is the count of all (in col7).
How to calculate these types of calculations in the answes.
Could u please suggest me the solution.
Thanks in Advance,

How to calculate value from perticular column and row in pivot table

Hi all,
I am having following pivot table.
Country
A
B
C
D
F
G
H
J
K
L
M
Grand Total
Canada
1
1
3
3
12
14
13
97
China
8
4
3
19
India
2
47
448
176
395
3656
1964
1360
8077
USA
1545
352
380
26
10
4
8
32
2054
1023
758
4624
UK
12
19
13
23
33
298
Grand Total
1545
352
381
29
72
474
184
427
5743
3028
2167
13114
Now I want sum of Columns A, B, C, K, M where Country = India in one field.
and sum of D, F, g in another field. and sum of remainig columns in another field.
How can i get sum of values with some where condition in pivot table.
Thanks,

Hi Michael,
Following is the representation which i want
CouRntry
ROW LABLES
A
B
C
Total of
ABC
F
G
Total
Of FG
J
K
L
TOTAL
of JL
Grand
Total
Canada
1
1
3
3
12
14
13
97
China
8
4
3
19
India
2
47
448
176
395
3656
1964
1360
8077
USA
1545
352
380
26
10
4
8
32
2054
1023
758
4624
UK
12
19
13
23
33
298
Grand Total
1545
352
381
29
72
474
184
427
5743
3028
2167
1
Also if i get sum how can i add a column in between of the fields.
Thanks

Measures as Rows in Pivot Table? OBIEE 11g

Hi,
Is it possible to show measures as rows and attributes as columns? I have only one value in my attribute columns.
example:
--------Company(Oracle)-----Country(India)
Sales        100                  20000
Units         50                  40000Thanks in advance.

869650 wrote:
Hi,
Is it possible to show measures as rows and attributes as columns? I have only one value in my attribute columns.
example:
--------Company(Oracle)-----Country(India)
Sales        100                  20000
Units         50                  40000Thanks in advance.In the pivot table, you have a column for Rows, Columns, and Measures.
Try this:
Put the Measure Labels in the Rows section, the Company column in the Columns section, and your Measures in the Measures section.

Disabling auto sort of rows for Pivot Tables in BI Publisher

is there a way to avoid the Pivot table in BI Publisher from sorting your data and just display the rows in the order retured from the data model ? By default it is sorting the data in asc order. Thanks !

hi jim
if you carefully look inside the form field's you will find the logic of sort . if you remove that you will get the data without any sorting order.
else send me your template and xml to my email id i can look into that .
email : [email protected]

How to Restrict the Rows In Pivot Table

Hi All,
how to Restrict the Row in the Pivot table.
My Requirement is like this.
i have to show the top 10 values in the pivot table but My report is show all the values.
how can we achieve this.
any quick solution for this appreciated.
Thanks,
Yogi.

Yogi1729 wrote:
Hi All,
how to Restrict the Row in the Pivot table.
My Requirement is like this.
i have to show the top 10 values in the pivot table but My report is show all the values.
how can we achieve this.
any quick solution for this appreciated.
Thanks,
Yogi.You can't really restrict the rows in a pivot table, but you can do this:
http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/

Exposing null row in Pivot table

Hi Gurus
I have a scenario here with pivot table ..when i am pulling the a bunch of columns in my pivot table the measures with null values is getting suppressed but i want to expose all the rows and their respective values (including null)
Regards
Debo

Sounds like what you want is to view data in dense form. We often do that here on my current project.
There are a couple ways to do it including outer joins, preserve dimensions, and cross joins. Depending on your scenario some options are better than others.
Here is a link that shows how to use cross joins. Personally this one is my preference.
http://gerardnico.com/wiki/dat/obiee/densification_repository

Hide a Row in Pivot table depending on condition

Hi , I am using pivot table which is in below format.
I--------------------date 1 | date 2 | date 3| new calculated item
measure 1 v1 v2 v3 v4
measure 2 v5 v6 v7 v8
measure 3 v9 v10 v11 v12
measure 4 v13 v14 v15 v16
now i need to hide the date 2 (ie v2 v6,v10,v14) column in the pivot table ( which is actually a value in a row for a column named as_of_date)
is this possible.
please let me know the solution.

Thanks @mma
i am unable to pass that {val1} exactly
here my scenario is, i have
year prompt and quarter prompt
depending on year prompt ,quarter prompt is populated with 4 dates
now i need to pass the max and min values of dates
to the asofdate.
please explain me this scenario.
thanks

Display value and percentage of row in pivot table w/o double counting...

Hello,
I am wondering how/if one can show a metric value and the row percentage it represents without double counting. So far, I have attempted to duplicate the metric value layer, move the duplicated layer in the measures section of the pivot table next to the original layer (i.e. I have the value twice in the measure section), and set the format of the duplicated layer to "show data as > percent > row".
This makes the trick in terms of the data I see in the table; however, the values displayed in the table are double counted in the chart. I guess this makes sense since I have duplicated the metric value.
Any thoughts on how I could tackle this issue differently?
Thanks,
JP

You can do all that in the Pivot Table... Go to the measure properties and Duplicate Layer...than Show as...
Dont need to duplicate the criteria...
Antonio
BExpert Brazil

All rows in pivot table

Hello Gurus,
The problem i am facing is whenever there is no content in the columns the rows are not being shown. I want all the rows to be displayed inspite whether there is data or not.
I tried unchecking limit rows based on content as well as i checked show blank rows but nothing has worked so far.
Any help will be greatly appreciated.
Thanks in advance
Dhrubo

Dhrubo ,
this is a modeling issue. You need:
A) figure out what to do with NULLS (you can control it with IFNULL function)
B) work on your joins (configure some mapping as LEFT or RIGHT OUTER - or maybe even FULL OUTER (not recommended for performance purposes). - you can do this in BMM
GL

How to move Calculated Item in 3rd row in pivot table.

Hi experts
I have calculated one calculated item in Piovt, Now i want to move it as 3rd row, So how can i achieve it.
Thanks in advance
Regards
Frnds

Hai Madhu,
It is pretty simple.
First u define a button. and in onAction Event of the button write the following code.
process is as follows:
1)get the node
2)get the element
3)using the method remove_element() ,remove the element.
<u><b>The Sample Code is as follows</b></u>
DATA:
      node_flighttab                      TYPE REF TO if_wd_context_node,
      elem_flighttab                      TYPE REF TO if_wd_context_element.
    node_flighttab = wd_context->get_child_node( 'FLIGHTTAB' ).
get element via lead selection
    elem_flighttab = node_flighttab->get_element( ).
    node_flighttab->remove_element( element = elem_flighttab ).
Follow the above code ,it will definately help you.

OBIEE 11g Grand total issue

Hello,
I have one requirement where I want to show the data as follows
Type          Metric          Values
Type1          units          100
          Days          50
          % Calc     10%
Type2           units          100
          Days          50
          % Calc     10%
Type3          units          100
          Days          50
          % Calc          10%
Total units     300
Total Days     150
Total % Calc 30%
If I take grand total of row in pivot table, I am not able to show Total units, Total Days and Total % Calc values in Grand Total because by default, same grand total name appears.
I want to give different grand total names and percentage sign should appear in grand total.
Please let me know if u need any more information.
Thanks.

Try to recreate the report. Just in case make sure that you dont have null values in that metric or try with ifnull(col,0)
Check this bug too BUG:9871470
Keep update

Grand total in Pivot Tables with Paging

I could help with this issue please
when we apply paging PivotTables there a way to show Grand total all pages, and I've noticed that the Grand total vee only when the last page or show all results at once.
For me it is important to see the Grand total on every page.
Thanks in advance for your cooperation

If you're not talking about printing, then you can do this:
1) Instead of using the same pivot table that you created for details to also display the Grand Total, first paginate the pivot table. Look here:
Re: Pivot table
In your pagination, break your pivot table in groups such that you can see a small enough chunk without having to scroll too much.
2) Now that you have a manageable size pivot table, create the Grand Total as another pivot table. Take out all the attributes that break the total in detail and leave only what will give you the Grand Total.
3) Add this pivot table to the bottom of your detail pivot table in step 1. This will give you the grand total right underneath each page of your detail pivot table without having to go all the way to the end of the report.

Grand Total in Rows of Pivot Table

Similar Messages

Maybe you are looking for