Graphical mapping question - need to create 2 nodes for each record
The mapping is from flat to nested, i.e. flat file to FIDCC2 idoc. Each record has to go to 2 repeated IDoc segments, each one with different posting key. Right now, I have it working for each record to a segment(for one segment) by using splitByValue (value change). How can I repeat the creation of another but with slightly different constant.
Also, how do I add line numbers? I remember seeing a posting on this a while ago - cannot locate it.
Will be Rewarded WELL.
Thanks,
Pam
Hi, Pam
Using the following example to store it as global variable
SetParameter from GloabalContainer:
container.getGlobalContainer ().setParameter ("COUNTER", "0");
GetParameter from GloabalContainer:
String myCounter = (String) container.getGlobalContainer().getParameter ("COUNTER");
When you map to your constant, store it in global variable, then you map other field, get current global variable, check its value, based on the value, you do proper mapping.
Hope it helps
Liang
Similar Messages
-
How to append parameter with URL for each record in table control?
Hi,
I have one table control which contains 5 columns.
(tripno, startdate, destination, reason, activities)
In 5th column, i need to display URL for each record.
for ex:
www.abc.com/test?tripno=1
www.abc.com/test?tripno=2
www.abc.com/test?tripno=3
when user clicks a particular hyperlink, it navigates to another page/component thru URL with one key field(tripno) to retrieve related records in next page.
1) i am not able to assign tripno to each record. when i assign tripno, its taking the last value which i assigned. ie. tripno=3 only.
How to assign URL to Reference field of LINK_TO_URL element at run time?
OR
2) we can do like this.
Simply assign url to reach record without key field.
www.abc.com/test
www.abc.com/test
www.abc.com/test
when user clicks a particular link, we can assign corresponding key field to the URL.
Where should i write this event? Bcoz, LINK_TO_URL doesnot have event.
how to do?Hi MOg.
Not sure whether I understand you .. but in the 5th column you want to have the reference URL. Is this the activities columen from you example?
Nevertheless, you need a attribute (String) in your context node which contains the URL. Bind this to the reference filed of linktourl. If you can not extend the structure you can create a sub node (cardinality 1:1) which contains the refernce attribute.
Then loop over all elements and concatenate www.abc.com/test?tripno= with the tripno of the current element into the reference field.
Hope tis helps,
Sascha.
Bind the -
Form that is a map of Ohio. I created layers for each county so I can click and it highlights, but I need to be able to click more than one. How do I do that?
Looks nice!
I understand what you've done now. You used the "Set Layer Visibility" command which sets the on/off state of all the layers at once. What you need is a more subtle approach, one that will only change the state of the specific layer associated with the button, not the rest of them (so that you could have multiple layers enabled at the same time). The way to do that is by using a script.
I wrote the script for you and applied it to the top-left counties (WILLIAMS and FULTON), in the attached file. You can now copy the actions I associated with those buttons to the rest of them, and it should work as you want it to.
The file: MAP-HHA-Geographic(3)_edited.pdf - Google Drive -
Do I need to create billing for FD (free delivery) sales order
Hi
I have a question. I created first a sales order (FD) in our sap system. but I don't know whether I need to create billing for the FD order. when I try to create billing for this FD order, SAP cannot to process it.
I also research configuration. in VOV8, SAP not set billing function.
thanks
HenryHi henry
If you have created Free of charge delivery (FD) sales order then the item category will be KLN only.After PGI then stock level will reduce and the effect of the stock is that you are issuing stock to customer at free of charge.And as you have assigned cost center then the data will flow to the controlling area and the Financial document after PGI.
Secondly if you assign TANN as a item category and do delivery and then PGI then if the reference document is different then it will have affect as the KMN and TANN item categories doesn't have same features
Regards
Srinath -
When do I really need to create indexes for a table?
Once I was talking to a dba in a conference.
He told me that not always I have to create indexes for a single table, it depends of its size.
He said that Oracle read registers in blocks, and for a small table Oracle can read it fully, in a single operation, so in those cases I don't need indexes and statistcs.
So I would like to know how to calculate it.
When do I really need to create indexes for a table?
If someone know any documment that explain that, or have some tips, I'd aprecciate.
Thanks.
P.S.: The version that I'm using is Oracle 9.2.0.4.0.Hi Vin
You mentioned so many mistakes here, I don't know where to begin ...
vprabhu_2000 wrote:
There are different kinds of Index. B-tree Index is by default. Bit map index, function based index,index organized table.
B-tree index if the table is large This is incorrect. Small tables, even those consisting of rows within just one block, can benefit from an index. There is no table size too small in which an index might not be benefical. William Robertson in his post references links to my blog where I discuss this.
and if you want to retrieve 10 % or less of data then B-tree index is good. This is all wrong as well. A FTS on a (say) million row table could very well be more efficient when retrieving (say) just 1% of data. An index could very well be more efficient when retrieving 100% of data. There's nothing special about 10% and there is no such magic number ...
>
Bit Map Index - On low cardinality columns like Sex for eg which could have values Male,Female create a bit map index. Completely and utterly wrong. A bitmap index might be the perfect type of index, better than a B-Tree, even if there are (say) 100,000 distinct values in the table. That a bitmap index is only suitable for low cardinality columns is just not true. And what if it's an OLTP application, with lot's of concurrent DML on the underlining table, do you really think a bitmap index would be a good idea ?
>
You can also create an Index organized table if there are less rows to be stored so data is stored only once in index and not in table. Not sure what you mean here but an IOT can potentially be useful if you have very large numbers of rows in the table. The number of rows has nothing to do with whether an IOT is suitable or not.
>
Hope this info helps. Considering most of it is wrong, I'm not sure it really helps at all :(
Cheers
Richard Foote
http://richardfoote.wordpress.com/ -
Create single message in receiving side for each record in the sender file
Dear Experts,
My Interface is from FILE to MQ (JMS)..
I have a specific requirement in my project, I have multiple files in sender directory ( /tmp)
Ex: FILE_20090202.TXT
FILE_20090203.TXT
FILE_20090204.TXT
FILE_20090205.TXT
And each file has couple of records just shown below:
ABC 123 WER SER
BCD 345 WEDR SER
CDE 567 GHTE DDGG u2026. Etc..
I have to process all the files at a time ( may be I can use file masking by FILE*.txt) , one message has to be created in MQ for each record of the file..
Ex:
Message 1: ABC 123 WER SER
Message 2: BCD 345 WEDR SER
Message 3: CDE 567 GHTE DDGG
Valuable inputs are appiciated !!
Cheers,
KumarAs already suggested, multi-mapping can be used
You need to set target root node occurrence to unbounded and map root node accordingly
you will have to use enhanced interface determinaion
For detail refer:
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible -
Create id, update id with date for each record
Hi,
Please give me brief idea or document for this concept:
I need create id, create date, update id, update date for each record inserted or updated in database (in few tables).
1) how user id can be obtained?
2) Is it better if i use views instead of tables for this?
3) is it possible for each record?
Please show me complete scenario. a piece of code can also be helpful.
thanx in advance.only.ashish99 wrote:
Hi,
Please give me brief idea or document for this concept:
I need create id, create date, update id, update date for each record inserted or updated in database (in few tables).
1) how user id can be obtained?SELECT
2) Is it better if i use views instead of tables for this?It depends.
post EXPLAIN PLAN for both.
3) is it possible for each record?yes
How do I ask a question on the forums?
SQL and PL/SQL FAQ -
How to genarate Primary Key for each record in XI Mapping
Hi,
I need to genarate primary key for each record in the paylod in mapping..
Eg: if i have a 10 reacords i need to have a primary key for each record..starting with the
Record Primary key
First 001
Secound 002
Tenth 010
If i need to write any user defined funtion... can any one provide the code for it.
Thanks
AmareshHi Bavesh,
I will explain with the example:
XML:
<Record 1>
<Primary key>
<value1>
<value2>
</Record 1>
<Record 2>
<Primary Key>
</Record 2>
like above i will be getting n number of recored and in each record i need to genarate primary key in XI.and the key sould be in sequence...
like for the first record 1 secound 2 like that primary key should add to the privous Primary key.
and this is for each payload.
Thanks
Amaresh -
Mapping issue: FCC: Idoc for each record in file
Hi,
I have file to Idoc scenario.
I receive csv file with multiple records.
The requirement is to create an Idoc for each record.
For eg.
source file
A1,B1,C1
A2,B2,C2
A3,B3,C3
After FCC
<MT>
<TRANS>
<ROW>
<A>A1</A>
<B>B1</B>
<C>C1</C>
</ROW>
<ROW>
<A>A2</A>
<B>B2</B>
<C>C2</C>
</ROW>
<ROW>
<A>A3</A>
<B>B3</B>
<C>C3</C>
</ROW>
</TRANS>
<MT>
I have first tested it with only 1 record to test end to end connectivity. It works as expected and Idoc is posted to target system.
Now when I am trying to send multiple records, I am getting some issues.
Below are the steps that I have taken to process multiple records:
1. Changed the cardinality of ROW (child of RecordSet) from 1 to Unbounded.
2. Changed the occurance of Idoc to Unbounded.
3. Mapped ROW to Idoc root.
I have tested the mapping in IR and it generates multiple IDOCs.
When I send the test file, it fails with error Tag found instead of tag IDOC BEGIN=
I can see the xml message created with multiple ROWs in XI by File adapter in sxmb_moni.
When I do Test Configuration in ID, with the XML message extracted from sxmbmoni, the result that I got was:_
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1></ns0:Message1></ns0:Messages>
This means that idoc was not created while mapping.
But the same sample message works OK in IR!
Pls help where I have missed.
Regards,
Anirudh.Sudhir,
Thanks for your response.
FCC is working fine. I have taken the XML message in XI created after FCC from csv sample message.
I have tested this message in IR by placing it between
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
</ns0:Message1>
</ns0:Message>
It is working fine and Idocs are created in mapping in IR.
But the same sample message is creating below output ID!
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1></ns0:Message1></ns0:Messages>
Regards,
Anirudh. -
Create of (demo for)OVAI (transaction for create entries for each vendor)
hi all,
can anyone plz tell me how 2 create (demo for)OVAI (transaction for create entries for each vendor)
thans & regards,
srinivas reddy.hiii
yes you can call transaction like that..take tcode in that parameter then you can use it in your program with statement like
call transaction (variable)..in background process.
regards
twinkal -
FM account assignments need to be assigned for each grantee year
Hi experts!!
I have a problem when i execute GM_REVAL (Revaluation of Currency for Grants Management). System gets an errror: FM account assignments need to be assigned for each grantee year (Message no. GRANTMGMT363).
I've customized FMDERIVE in order to derive Fund center, commitment item, grant and fund. And GMDERIVE to derive Sponsor Program and Sponsor class. In a FI postings (FB01 or FBCJ), these derivations works ok.
Anyone knows how can i solve this error?
Thank you.Hello Dolors,
for the revaluation you need to maintain default FM settings in the
customizing. See IMG - GM - master data - revaluation. Note that these
FM master data objects must be valid throughout the budget validity
period.
I hope this helps..
Best regards,
Mar. -
If I own a desktop iMac and a MacBook Air, do I need to purchase Lion for each of them?
No. You can install Lion on all machines under your control. BTW, to avoid wasting bandwidth, time, and electricity, when you first DL Lion, don't install it, quit the installer, and copy the Install Mac OS X Lion.app which is DL'd to /Applications to another location. The stupid, inane installer deletes itself as part of its installation process. Then, copy the saved version to the other machines. Do note that if you move the installer app from /Applications, you can install it, and it won't be deleted.
-
Do I need to download itunes for each user on my mac pro?
do I need to download itunes for each usere on my mac pro?
Airplay Mirroring of the Mac screen requires Mountain Lion or later and a compatible Mac, see:
About AirPlay Mirroring in OS X -
From XML (import) for each record automatic new page creation?
Hello,
I'm playing around with XML.
Can someone tell me where to look and help me?
I load variable data via XML.
Example content xml:
<pages>
<page>
<id>1</id>
<article>title page 1</article>
<info>Info page 1</info>
<price>price page 1</price>
</page>
<page>
<id>2</id>
<article>title page 2</article>
<info>Info page 2</info>
<price>price page 2</price>
</page>
<page>
<id>3</id>
<article>title page 3</article>
<info>Info page 3</info>
<price>price page 3</price>
</page>
</pages>
I have 1 page classified (ie 3 text boxes). The idea is that for each record in the xml (in this case 1, 2 and 3) a new page is created (Qua layout identical to the page that I had prepared, but with the corresponding data in each box)
How do I do this?
Thanks!If you need to keep the three parts of your page in separate text frames, you are probably out of luck.
I can't tell from your question whether you know how to tag frames and import XML content into them. If you don't, the manual is fairly clear on it. However, it states more than once that "InDesign flows merged XML content into existing frames only." That means that it won't add frames or pages for you -- you can only load XML into tagged frames on the first page and will have to add extra ones by hand.
If you could rework your design so that all the elements could be accommodated in a single text frame, using paragraph styles to keep them apart, you could just import the XML and map tags to styles, then drag it into a frame on the first pages. If your article style was set to start in a new frame, everything but the first would go into overset text, which you could deal with in the usual way -- shift-click on the in port of a new frame and InDesign will add the pages you need. -
SSRS 2008 R2 - Separate report for Each record?
Hi,
How do I create new pdf reports for each records from a table? The pdf files should be named as customerid.pdf and needs to be delivered in email or share path?
Each record has enough content for 5 page of pdf report.
How do we achieve this?
Thanks
RajYou can create a data driven subscription to loop through records in the table and create pdf based on number of customerid.
Have a look at this for DD subscriptions :
http://msdn.microsoft.com/en-us/library/ms169673.aspx
Kind Regards, Vikram Kansal Please mark solved if I've answered your question, vote for it as helpful to help other user's find a solution quicker
Maybe you are looking for
-
Ok so i have this iPod touch (3rd gen) and i'm trying to update it through iTunes and when i click check for update it keeps saying this version of iPod software (2.2.1) is your current version. what do i do? how do i update it?
-
PDF viewer to manipulate pdf files
Hello, I am using MySQL and JSP in order to create a website. In a table from the database i have store pdf files using the data type BLOB. How I can manipulate these pdf files from the JSP? I have search that the Java PDF SDK might do that job. Is a
-
Setting Up Supervisor Redundancy in a 6500
All, I am configuring a Cat 6500 with 2 WS-SUP720-3B engines. How do I configure these two engines for redundany? Is there a configuration for this or do you just install them and the software automatically sets the priority. I am asking because I ha
-
I have a rough understanding of regular expressions and an even rougher understanding of soundex, so I am aware that there are some powerful tools for matching strings out there. My specific problem is that we are looking to build a name matching ser
-
I accidently deleted all the notes that was in my phone.
Yesterday I did a music sync on the iPhone I'm currently using on my new computer. I read the warning about deleting all music but missed where it said notes would be deleted also. I really need those notes back and no backups were made on the comput