Create single message in receiving side for each record in the sender file

Dear Experts,
My Interface is from FILE to MQ (JMS)..
I have a specific requirement in my project, I have multiple files in sender directory ( /tmp)
Ex: FILE_20090202.TXT
FILE_20090203.TXT
FILE_20090204.TXT
FILE_20090205.TXT
And each file has couple of records just shown below:
ABC   123     WER    SER
BCD   345     WEDR    SER
CDE   567     GHTE   DDGG u2026. Etc..
I have to process all the files at a time ( may be I can use file masking by FILE*.txt) , one message has to be created in MQ for each record of the file..
Ex:
Message 1: ABC   123     WER    SER
Message 2: BCD   345     WEDR    SER
Message 3: CDE   567     GHTE   DDGG
Valuable inputs are appiciated !!
Cheers,
Kumar

As already suggested, multi-mapping can be used
You need to set target root node occurrence to unbounded and map root node accordingly
you will have to use enhanced interface determinaion
For detail refer:
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

Similar Messages

To create 5 different files in target for each record in the sender file

Hi SapAll,
i have got a a requirement where pi need to create 5 different files with data of each record from the sender side.
Its an file to file scenario
suppose there are 5 rows in a file , then in target side i need to create 5 diff with each one record in it.
Can we do it without using 3 comm channels
Thanks&regards,
Sai

Hey,
As a more generic solution, can you try using MultiMapping. It is supposed to generate multiple instances of messages on receiver side.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
You just need to put a simple logic in Message Mapping to generate new Node for every occurence of source field.
Thanks
Aamir

Create id, update id with date for each record

Hi,
Please give me brief idea or document for this concept:
I need create id, create date, update id, update date for each record inserted or updated in database (in few tables).
1) how user id can be obtained?
2) Is it better if i use views instead of tables for this?
3) is it possible for each record?
Please show me complete scenario. a piece of code can also be helpful.
thanx in advance.

only.ashish99 wrote:
Hi,
Please give me brief idea or document for this concept:
I need create id, create date, update id, update date for each record inserted or updated in database (in few tables).
1) how user id can be obtained?SELECT
2) Is it better if i use views instead of tables for this?It depends.
post EXPLAIN PLAN for both.
3) is it possible for each record?yes
How do I ask a question on the forums?
SQL and PL/SQL FAQ

Problem with implemnting delete for each record in the report

Hello all,
I am having trouble implementing the following requirement in my application.
In the reports, in each row..I need a delete button. Only few Users( Managers/Administrators) should be able to view this button. Rest should be able to see the normal report. Also when the user clicks on delete, the record should not be actually deleted but a column named Active/Inactive should be made InActive.( The report has only records which are active).
My problem is when the user clicks on edit button, I dont want to go to another page and perform delete operation. I should be able to modify the record in the same report page. Is this possible?
It would be really great if someone can give me inputs on how to do this..
Thanks,
shravanthi

See this link for possible solution:
Coding a delete process
You will need to modify to do your "Delete"
There is also Dene's Wonderful example application that shows a similar idea, but again you will need to modify to get your "delete" status set in the rows
how to update records marked by [row selector] ?
Thank you,
Tony Miller
Webster, TX

From XML (import) for each record automatic new page creation?

Hello,
I'm playing around with XML.
Can someone tell me where to look and help me?
I load variable data via XML.
Example content xml:
<pages>
     <page>
         <id>1</id>
         <article>title page 1</article>
         <info>Info page 1</info>
         <price>price page 1</price>
     </page>
     <page>
         <id>2</id>
         <article>title page 2</article>
         <info>Info page 2</info>
         <price>price page 2</price>
     </page>
     <page>
         <id>3</id>
         <article>title page 3</article>
         <info>Info page 3</info>
         <price>price page 3</price>
     </page>
</pages>
I have 1 page classified (ie 3 text boxes). The idea is that for each record in the xml (in this case 1, 2 and 3) a new page is created (Qua layout identical to the page that I had prepared, but with the corresponding data in each box)
How do I do this?
Thanks!

If you need to keep the three parts of your page in separate text frames, you are probably out of luck.
I can't tell from your question whether you know how to tag frames and import XML content into them. If you don't, the manual is fairly clear on it. However, it states more than once that "InDesign flows merged XML content into existing frames only." That means that it won't add frames or pages for you -- you can only load XML into tagged frames on the first page and will have to add extra ones by hand.
If you could rework your design so that all the elements could be accommodated in a single text frame, using paragraph styles to keep them apart, you could just import the XML and map tags to styles, then drag it into a frame on the first pages. If your article style was set to start in a new frame, everything but the first would go into overset text, which you could deal with in the usual way -- shift-click on the in port of a new frame and InDesign will add the pages you need.

How to genarate Primary Key for each record in XI Mapping

Hi,
I need to genarate primary key for each record in the paylod in mapping..
Eg: if i have a 10 reacords i need to have a primary key for each record..starting with the
Record      Primary key
First            001
Secound      002
Tenth         010
If i need to write any user defined funtion... can any one provide the code for it.
Thanks
Amaresh

Hi Bavesh,
I will explain with the example:
XML:
<Record 1>
<Primary key>
<value1>
<value2>
</Record 1>
<Record 2>
<Primary Key>
</Record 2>
like above i will be getting n number of recored and in each record i need to genarate primary key in XI.and the key sould be in sequence...
like for the first record 1 secound 2 like that primary key should add to the privous Primary key.
and this is for each payload.
Thanks
Amaresh

Create Support Message via Help - Limitation for certain people

Hi,
i try to configure my SolMan, so that only a couple of person can create a support message with Help -> Create Support Message.
I look for a role, but can't find anything to solve this issue. Does anyone now what I have to customize, that only people I allow can create a support message in that way?
Thanks in advance
Michael

Thanks for your replies, but this doesn't solve my problem
1) When I don't create a business partner for those people, they can create messages, but then then the filed "message processor" would be empty in SolMan
2) which role do you mean? I tested with a test-user without any role - he can create support messages as well...
regards
Michael

Creating a JButton for each line in a txt file

I need to know how to creating a JButton for each line in a txt file then add an actionListener to the number of buttons (note they are in a JTable). Here is a clipet of code thanx for the help (note that this is one part of a program i am making there are 2 more classes. If u need them just ask) Thanx:
class Diary extends JFrame implements ActionListener {
     private JTextArea note;
     private JTextField name;
     private JMenuBar menu = new JMenuBar();
     private JMenu file, edit, font, background, tcolor, settings, help;
     private JMenuItem nu, copy, paste, save, exit, b8, b10, b12, b14, b16, b18, b20, b24, b30, bblue, bred, bgreen, bpink, cblue, cred, cgreen, cpink, eset, nver, using, about;
     private String[] columnNames = {
          "File"
     private Vector dat = new Vector();
     private JTable filetable;
     public Diary() {
          setSize(new Dimension(500, 500));
          setTitle("Diary 2.00");
          file = new JMenu("File");
          menu.add(file);
          nu = new JMenuItem("new");
          nu.addActionListener(this);
          file.add(nu);
          file.add(new JSeparator());
          copy = new JMenuItem("copy");
          copy.addActionListener(this);
          file.add(copy);
          paste = new JMenuItem("paste");
          paste.addActionListener(this);
          file.add(paste);
          file.add(new JSeparator());
          save = new JMenuItem("Save");
          save.addActionListener(this);
          file.add(save);
          file.add(new JSeparator());
          exit = new JMenuItem("exit");
          exit.addActionListener(this);
          file.add(exit);
          edit = new JMenu("Edit");
          menu.add(edit);
          font = new JMenu("font");
          edit.add(font);
          b8 = new JMenuItem("8");
          b8.addActionListener(this);
          font.add(b8);
          b10 = new JMenuItem("10");
          b10.addActionListener(this);
          font.add(b10);
          b12 = new JMenuItem("12");
          b12.addActionListener(this);
          font.add(b12);
          b14 = new JMenuItem("14");
          b14.addActionListener(this);
          font.add(b14);
          b16 = new JMenuItem("16");
          b16.addActionListener(this);
          font.add(b16);
          b18 = new JMenuItem("18");
          b18.addActionListener(this);
          font.add(b18);
          b20 = new JMenuItem("20");
          b20.addActionListener(this);
          font.add(b20);
          b24 = new JMenuItem("24");
          b24.addActionListener(this);
          font.add(b24);
          b30 = new JMenuItem("30");
          b30.addActionListener(this);
          font.add(b30);
          background = new JMenu("background");
          edit.add(background);
          bblue = new JMenuItem("blue");
          bblue.addActionListener(this);
          background.add(bblue);
          bred = new JMenuItem("red");
          bred.addActionListener(this);
          background.add(bred);
          bgreen = new JMenuItem("green");
          bgreen.addActionListener(this);
          background.add(bgreen);
          bpink = new JMenuItem("pink");
          bpink.addActionListener(this);
          background.add(bpink);
          tcolor = new JMenu("text color");
          edit.add(tcolor);
          cblue = new JMenuItem("blue");
          cblue.addActionListener(this);
          tcolor.add(cblue);
          cred = new JMenuItem("red");
          cred.addActionListener(this);
          tcolor.add(cred);
          cgreen = new JMenuItem("green");
          cgreen.addActionListener(this);
          tcolor.add(cgreen);
          cpink = new JMenuItem("pink");
          cpink.addActionListener(this);
          tcolor.add(cpink);
          settings = new JMenu("Settings");
          menu.add(settings);
          eset = new JMenuItem("Edit Settings");
          eset.addActionListener(this);
          settings.add(eset);
          help = new JMenu("Help");
          menu.add(help);
          using = new JMenuItem("Using");
          using.addActionListener(this);
          help.add(using);
          about = new JMenuItem("About");
          about.addActionListener(this);
          help.add(about);
          help.add(new JSeparator());
          nver = new JMenuItem("new Versions");
          nver.addActionListener(this);
          help.add(nver);
          note = new JTextArea("");
          try {
               BufferedReader filein = new BufferedReader(new FileReader("files.txt"));
               String sfile;
               while ((sfile = filein.readLine()) != null) {
                    //add buttons per each line of the txt file and show em
          catch (FileNotFoundException ioe) {
               JOptionPane.showMessageDialog(null, "Iternal Error, contact [email protected] if the error persists", "", JOptionPane.WARNING_MESSAGE);
          catch (IOException ioe) {
               JOptionPane.showMessageDialog(null, "Iternal Error, contact [email protected] if the error persists", "", JOptionPane.WARNING_MESSAGE);JOptionPane.showMessageDialog(null, "Iternal Error, contact [email protected] if the error persists", "", JOptionPane.WARNING_MESSAGE);
          String[][] data = new String[dat.size()][];
          for (int x = 0; x < dat.size(); x++) {
               data[x] = (String[])dat.get(x);
          filetable = new JTable(data, columnNames);
          filetable.setPreferredScrollableViewportSize(new Dimension(100, 500));
          JScrollPane scrollpane = new JScrollPane(filetable);
          name = new JTextField("diary");
          JPanel main = new JPanel(new GridLayout(0, 1));
          getContentPane().add(note);
          getContentPane().add(name, BorderLayout.SOUTH);
          getContentPane().add(scrollpane, BorderLayout.WEST);
          setJMenuBar(menu);
     public void actionPerformed(ActionEvent e) {
          if (e.getSource() == nu) {
               int nuask = JOptionPane.showConfirmDialog(Diary.this, "Are you sure you want to make a new entry?\nThis will erease any unsaved entry's!!");
               if (nuask == JOptionPane.YES_OPTION) {
                    note.setText("");
                    note.setBackground(Color.WHITE);
                    note.setForeground(Color.BLACK);
          if (e.getSource() == copy) {
               note.copy();
          if (e.getSource() == paste) {
               note.paste();
          if (e.getSource() == save) {
               try {
                    String sn = name.getText();
                FileWriter outputStream = new FileWriter("saved/" + sn + ".txt");
                setTitle("Diary 1.00 : " + sn);
                outputStream.write(note.getText());
                outputStream.close();
            catch(IOException ioe) {
                 System.out.println("IOException");
          if (e.getSource() == exit) {
               int exitask = JOptionPane.showConfirmDialog(Diary.this, "Are you sure you want to exit? Any unsaved entries will be deleted");
               if (exitask == JOptionPane.YES_OPTION) {
                    System.exit(0);
          if (e.getSource() == b8) {
               note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),8));
          if (e.getSource() == b10) {
               note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),10));
          if (e.getSource() == b12) {
               note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),12));
          if (e.getSource() == b14) {
               note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),14));
          if (e.getSource() == b18) {
               note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),18));
          if (e.getSource() == b20) {
               note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),20));
          if (e.getSource() == b24) {
               note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),24));
          if (e.getSource() == b30) {
               note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),30));
          if (e.getSource() == bblue) {
               note.setBackground(Color.BLUE);
          if (e.getSource() == bred) {
               note.setBackground(Color.RED);
          if (e.getSource() == bgreen) {
               note.setBackground(Color.GREEN);
          if (e.getSource() == bpink) {
               note.setBackground(Color.PINK);
          if (e.getSource() == cblue) {
               note.setForeground(Color.BLUE);
          if (e.getSource() == cred) {
               note.setForeground(Color.RED);
          if (e.getSource() == cgreen) {
               note.setForeground(Color.GREEN);
          if (e.getSource() == cpink) {
               note.setForeground(Color.PINK);
          if (e.getSource() == eset) {
               new UserSettings().setVisible(true);
          if (e.getSource() == about) {
               JOptionPane.showMessageDialog(null, "Created by Collin Doering 2005 in Gr.9\n\nErrors:\n------------------------------------------------------------------\n1. No File Encryption\n2. No user and password Encryption", "", JOptionPane.INFORMATION_MESSAGE );
          if (e.getSource() == nver) {
               JOptionPane.showMessageDialog(null, "New Version |3.00| expected July, 2005\n\nNew Features\n----------------------------------------------\n1. File Encryption\n2. User File Encryption\n3. Full help dialog\n4. More Text changing features", "", JOptionPane.INFORMATION_MESSAGE);
          if (e.getSource() == using) {
               JOptionPane.showMessageDialog(null, "Go ask Collin Doering\[email protected]", "", JOptionPane.INFORMATION_MESSAGE );
THANK YOU

so i still do not understand how i would create one
button per each line in a txt flle then read in the
file that the txt file specified.This assumes you know how many lines there are in the file.
If not, modify as per my prior post
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
class Testing extends JFrame
String[] linesInFile = {"Hello","World","Goodbye","Now"};
JButton[] btn = new JButton[linesInFile.length];
public Testing()
    setLocation(200,200);
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    JPanel jp = new JPanel(new GridLayout(0,1));
    for(int x = 0; x < btn.length; x++)
      btn[x] = new JButton(linesInFile[x]);//<---this would be where file.readLine() goes
      jp.add(btn[x]);
      btn[x].addActionListener(new ActionListener(){
        public void actionPerformed(ActionEvent ae){
          JOptionPane.showMessageDialog(getContentPane(),ae.getActionCommand());}});
    getContentPane().add(jp);
    pack();
public static void main(String[] args){new Testing().setVisible(true);}
}

Create standby maximum number of logfiles for each thread

The oracle doc states this equation for appropriate number of standby redo log file groups
(maximum number of logfiles for each thread +1) * maximum number of threads
How do you get the maximum number of logfiles for each thread and the max thread?
Thanks!

If you are running RAC you can, in theory, be running with a diferent count
of Online Redo Logs in each thread (instance).
However, normally, you would have the same number of Redo Logs in each
thread.
The theoretical max is prescribed at the CREATE DATABASE and can be
changed with a CREATE CONTROLFILE. If you do an
ALTER DATABASE BACKUP CONTROLFILE TO TRACE
the sql script in the tracefile shows the maximum number of logs and members.

Graphical mapping question - need to create 2 nodes for each record

The mapping is from flat to nested, i.e. flat file to FIDCC2 idoc. Each record has to go to 2 repeated IDoc segments, each one with different posting key. Right now, I have it working for each record to a segment(for one segment) by using splitByValue (value change). How can I repeat the creation of another but with slightly different constant.
Also, how do I add line numbers? I remember seeing a posting on this a while ago - cannot locate it.
Will be Rewarded WELL.
Thanks,
Pam

Hi, Pam
Using the following example to store it as global variable
SetParameter from GloabalContainer:
container.getGlobalContainer ().setParameter ("COUNTER", "0");
GetParameter from GloabalContainer:
String myCounter = (String) container.getGlobalContainer().getParameter ("COUNTER");
When you map to your constant, store it in global variable, then you map other field, get current global variable, check its value, based on the value, you do proper mapping.
Hope it helps
Liang

Lookup Data For Each Record of Result Set

I'm trying to determine if the following task is possible in BPEL and how to implement it.
Assume I have two DB Adapters returning data from two different databases.
The first excepts no inputs returns 5 records in a collection looking somewhat like the following.
Order ID, Item ID
1, 2
2, 1
3, 1
4, 2
5, 3
The second accepts an Item ID as input and returns the description for that item.
I would like the output of the BPEL Process to look like this.
Order ID, Item ID, Item Desc
1, 2, Computer
2, 1, Desk
3, 1, Desk
4, 2, Computer
5, 3, Lamp
I'm new to BPEL and I'm assuming this will involve invoking the first db adapter link and then iterator through the result set calling the second db adapter link for each record but I'm not sure where to start. I'm hoping someone can give me a simple example that I can play with. I've looked at How to iterate through multiple records read from a file adapter? and How to pass a single element in an array to XSL from BPEL but I'm getting lost.
Thanks

I just got it working in the BPEL for-each loop by creating a variable of type Order which I then assigned the results from that loop and then appended them to my output variable. I'd be interested in seeing how I could do that within a transformation if its quicker. How do I append in a transformation so that I can add the row after each loop.
Here is the BPEL so far.
I will note that I think just fetching a complete copy of both data sources and merging wouldn't be ideal as my items table could contain a million records or more and I'm only wanting to fetch the ones I'm interested in.
Thanks
<?xml version = "1.0" encoding = "UTF-8" ?>

<process name="Lookup_Orders"
               targetNamespace="http://xmlns.oracle.com/Order_Lookup/Sales_System/Lookup_Orders"
               xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
               xmlns:client="http://xmlns.oracle.com/Order_Lookup/Sales_System/Lookup_Orders"
               xmlns:ora="http://schemas.oracle.com/xpath/extension"
               xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
         xmlns:bpel="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
         xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/db/Order_Lookup/Sales_System/get_orders"
         xmlns:ns2="http://www.example.org"
         xmlns:ns3="http://xmlns.oracle.com/pcbpel/adapter/db/top/get_orders"
         xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
         xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
         xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
         xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue"
         xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
         xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
         xmlns:bpm="http://xmlns.oracle.com/bpmn20/extensions"
         xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
         xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
         xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
         xmlns:ns4="http://xmlns.oracle.com/pcbpel/adapter/db/Order_Lookup/Sales_System/get_items"
         xmlns:ns5="http://xmlns.oracle.com/pcbpel/adapter/db/top/get_items"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <import namespace="http://xmlns.oracle.com/Order_Lookup/Sales_System/Lookup_Orders" location="Lookup_Orders.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
    
<partnerLinks>
    
    <partnerLink name="lookup_orders_client" partnerLinkType="client:Lookup_Orders" myRole="Lookup_OrdersProvider"/>
    <partnerLink name="get_orders" partnerLinkType="ns1:get_orders_plt"
                 partnerRole="get_orders_role"/>
    <partnerLink name="get_items" partnerLinkType="ns4:get_items_plt"
                 partnerRole="get_items_role"/>
</partnerLinks>

<variables>
    
    <variable name="inputVariable" messageType="client:Lookup_OrdersRequestMessage"/>
    
    <variable name="outputVariable" messageType="client:Lookup_OrdersResponseMessage"/>
    <variable name="Invoke1_get_ordersSelect_InputVariable"
              messageType="ns1:get_ordersSelect_inputParameters"/>
    <variable name="Invoke1_get_ordersSelect_OutputVariable"
              messageType="ns1:OrdersCollection_msg"/>
    <variable name="Invoke2_get_itemsSelect_InputVariable"
              messageType="ns4:get_itemsSelect_inputParameters"/>
    <variable name="Invoke2_get_itemsSelect_OutputVariable"
              messageType="ns4:ItemsCollection_msg"/>
    <variable name="Output_Row" element="ns2:OrderCollection"/>
</variables>

<sequence name="main">
    
    <receive name="receiveInput" partnerLink="lookup_orders_client" portType="client:Lookup_Orders" operation="process" variable="inputVariable" createInstance="yes"/>
    
    <invoke name="Invoke1" bpelx:invokeAsDetail="no" partnerLink="get_orders"
            portType="ns1:get_orders_ptt" operation="get_ordersSelect"
            inputVariable="Invoke1_get_ordersSelect_InputVariable"
            outputVariable="Invoke1_get_ordersSelect_OutputVariable"/>
    <forEach parallel="no" counterName="ForEach1Counter" name="ForEach1">
      <startCounterValue>1</startCounterValue>
      <finalCounterValue>count($Invoke1_get_ordersSelect_OutputVariable.OrdersCollection/ns3:Orders)</finalCounterValue>
      <scope name="Scope1">
        <sequence name="Sequence1">
          <assign name="Assign2">
            <copy>
              <from>$Invoke1_get_ordersSelect_OutputVariable.OrdersCollection/ns3:Orders[$ForEach1Counter]/ns3:itemId</from>
              <to>$Invoke2_get_itemsSelect_InputVariable.get_itemsSelect_inputParameters/ns5:item_id</to>
            </copy>
          </assign>
          <invoke name="Invoke2" bpelx:invokeAsDetail="no"
                  partnerLink="get_items" portType="ns4:get_items_ptt"
                  operation="get_itemsSelect"
                  inputVariable="Invoke2_get_itemsSelect_InputVariable"
                  outputVariable="Invoke2_get_itemsSelect_OutputVariable"/>
          <assign name="Assign3">
            <copy>
              <from>$Invoke1_get_ordersSelect_OutputVariable.OrdersCollection/ns3:Orders[$ForEach1Counter]/ns3:orderId</from>
              <to>$Output_Row/ns2:Order/ns2:Order_ID</to>
            </copy>
            <copy>
              <from>$Invoke1_get_ordersSelect_OutputVariable.OrdersCollection/ns3:Orders[$ForEach1Counter]/ns3:itemId</from>
              <to>$Output_Row/ns2:Order/ns2:Item_ID</to>
            </copy>
            <copy>
              <from>$Invoke2_get_itemsSelect_OutputVariable.ItemsCollection/ns5:Items[1]/ns5:itemDesc</from>
              <to>$Output_Row/ns2:Order/ns2:Item_Desc</to>
            </copy>
          </assign>
          <assign name="Assign4">
            <extensionAssignOperation>
              <bpelx:append>
                <bpelx:from>$Output_Row/ns2:Order</bpelx:from>
                <bpelx:to>$outputVariable.payload</bpelx:to>
              </bpelx:append>
            </extensionAssignOperation>
          </assign>
        </sequence>
      </scope>
    </forEach>
    <reply name="replyOutput" partnerLink="lookup_orders_client" portType="client:Lookup_Orders" operation="process" variable="outputVariable"/>
</sequence>
</process>

'File in Use' message is received when one user is in the report and another user tries to open the Excel template

‘File in Use’ message is received when one user is in the report and another user tried to open the excel template. how to make excel template shared for multiple users so the users don’t see the ‘File in Use’ message?

Hi Febin,
In addition to others’ replies, we can create a shared workbook and place it on a network location where several people can
edit the contents simultaneously. For example, if the people in your work group each handle several projects and need to know the status of each other's projects, the group can use a shared workbook to track the status of the projects. All persons involved
can then enter the information for their projects in the same workbook.
Regarding how to do this,
the following article can be referred to reference.
Use a shared workbook to collaborate
http://office.microsoft.com/en-in/excel-help/use-a-shared-workbook-to-collaborate-HP010096833.aspx
Best regards,
Frank Shen

Mapping issue: FCC: Idoc for each record in file

Hi,
I have file to Idoc scenario.
I receive csv file with multiple records.
The requirement is to create an Idoc for each record.
For eg.
source file
A1,B1,C1
A2,B2,C2
A3,B3,C3
After FCC
<MT>
<TRANS>
<ROW>
<A>A1</A>
<B>B1</B>
<C>C1</C>
</ROW>
<ROW>
<A>A2</A>
<B>B2</B>
<C>C2</C>
</ROW>
<ROW>
<A>A3</A>
<B>B3</B>
<C>C3</C>
</ROW>
</TRANS>
<MT>
I have first tested it with only 1 record to test end to end connectivity. It works as expected and Idoc is posted to target system.
Now when I am trying to send multiple records, I am getting some issues.
Below are the steps that I have taken to process multiple records:
1. Changed the cardinality of ROW (child of RecordSet) from 1 to Unbounded.
2. Changed the occurance of Idoc to Unbounded.
3. Mapped ROW to Idoc root.
I have tested the mapping in IR and it generates multiple IDOCs.
When I send the test file, it fails with error Tag found instead of tag IDOC BEGIN=
I can see the xml message created with multiple ROWs in XI by File adapter in sxmb_moni.
When I do Test Configuration in ID, with the XML message extracted from sxmbmoni, the result that I got was:_
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1></ns0:Message1></ns0:Messages>
This means that idoc was not created while mapping.
But the same sample message works OK in IR!
Pls help where I have missed.
Regards,
Anirudh.

Sudhir,
Thanks for your response.
FCC is working fine. I have taken the XML message in XI created after FCC from csv sample message.
I have tested this message in IR by placing it between
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
</ns0:Message1>
</ns0:Message>
It is working fine and Idocs are created in mapping in IR.
But the same sample message is creating below output ID!
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1></ns0:Message1></ns0:Messages>
Regards,
Anirudh.

BAPI_PO_CREATE1 not able to create PO's for multiple rows from the flat fil

Hi
i am uploading PO's from a flat file into SAP using the BAPI_PO_CREATE1. Everything works fine if the flat file hast only one record.
if the flat file has more than one record then while loading the second record the BAPI returns a error message. I am calling the BAPI in a loop.
The strange thing is that if i load the second record individually the program is able to create the PO. So only when i have multiple records in the flat file i am unable to load the PO into SAP. I debugged and checked all the internal tables passed to the BAPI. All seems to have the data correctly but still the BAPI fails.
any idea where i am going wrong?
the code looks something like this.
LOOP AT HEADER_ITAB.
   PERFORM FILL_HEADER_RECORDS.
LOOP AT ITEM_ITAB WHERE EBELN eq HEADER_ITAB-EBELN.
     PERFORM FILL_ITEM_RECORDS.
ENDLOOP.
PERFORM CERATE_PO_VIA_BAPI.
ENDLOOP.

What is the error message. Are you trying something like this:
    LOOP AT T_DATA1.
      AT NEW LIFNR.
        READ TABLE T_DATA1 INDEX SY-TABIX.
        PERFORM INIT_TABLES.
        PERFORM FILL_DATA.
--Call the BAPI to create PO
        PERFORM CREATE_PO.
      ENDAT.
    ENDLOOP.
FORM CREATE_PO .
CALL FUNCTION 'BAPI_PO_CREATE1'
    EXPORTING
      POHEADER                     =   POHEADER
      POHEADERX                    =   POHEADERX
    POADDRVENDOR                 =
    TESTRUN                      =
    MEMORY_UNCOMPLETE            =
    MEMORY_COMPLETE              =
    POEXPIMPHEADER               =
    POEXPIMPHEADERX              =
    VERSIONS                     =
    NO_MESSAGING                 =
    NO_MESSAGE_REQ               =
    NO_AUTHORITY                 =
    NO_PRICE_FROM_PO             =
   IMPORTING
     EXPPURCHASEORDER             = EXPPURCHASEORDER
     EXPHEADER                    = EXPHEADER
     EXPPOEXPIMPHEADER            = EXPPOEXPIMPHEADER
   TABLES
     RETURN                       = RETURN
     POITEM                       = POITEM
     POITEMX                      = POITEMX
    POADDRDELIVERY               =
     POSCHEDULE                   = POSCHEDULE
     POSCHEDULEX                  = POSCHEDULEX
     POACCOUNT                    = POACCOUNT
    POACCOUNTPROFITSEGMENT       =
     POACCOUNTX                   = POACCOUNTX
    POCONDHEADER                 =
    POCONDHEADERX                =
     POCOND                       = POCOND
     POCONDX                      = POCONDX
    POLIMITS                     =
    POCONTRACTLIMITS             =
    POSERVICES                   =
    POSRVACCESSVALUES            =
    POSERVICESTEXT               =
    EXTENSIONIN                  =
    EXTENSIONOUT                 =
    POEXPIMPITEM                 =
    POEXPIMPITEMX                =
    POTEXTHEADER                 =
      POTEXTITEM                   = POTEXTITEM
    ALLVERSIONS                  =
     POPARTNER                    = POPARTNER
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      WAIT   = 'X'
    IMPORTING
      RETURN = RETURN1.
DATA: L_NAME TYPE LFA1-NAME1.
CLEAR L_NAME.
SELECT SINGLE NAME1
           FROM LFA1
           INTO L_NAME
           WHERE LIFNR = POHEADER-VENDOR.
LOOP AT RETURN.
    WRITE : / RETURN-TYPE,
              RETURN-ID,
              RETURN-MESSAGE.
    WRITE : '--> For vendor:',
             POHEADER-VENDOR,
             L_NAME.
ENDLOOP.
ENDFORM.                    " CREATE_PO

FillBy always fills in the same row in data grid view. How to make it fill in a new row for each click of the Fillby Button? VB 2010 EXPRESS?

Hi there,
I am a beginner in Visual Basic Express 2010. I have a Point of Sale program that uses DataGridView to display records from an external microsoft access
database using the fillby query.
It works, but it repopulates the same row each time, but i want to be able to display multiple records at the same time, a new row should be filled for
each click of the fillby button.
also I want to be able to delete any records if the customer suddenly decides to not buy an item after it has already been entered.
so actually 2 questions here:
1. how to populate a new row for each click of the fillby button
2. how to delete records from data grid view after an item has been entered
Thanks
Vishwas

Hello,
The FillBy method loads data according to what the results are from the SELECT statement, so if there is one row then you get one row in the DataGridView, have two rows then two rows show up.
Some examples
Form load populates our dataset with all data as it was defined with a plain SELECT statement. Button1 loads via a query I created after the fact to filter on a column, the next button adds a new row to the existing data. When adding a new row it is appended
to the current data displayed and the primary key is a negative value but the new key is shown after pressing the save button on the BindingNavigator or there are other ways to get the new key by manually adding the row to the backend table bypassing the Adapter.
The following article with code shows this but does not address adapters.
Conceptually speaking the code in the second code block shows how to get the new key
Public Class Form1
Private Sub StudentsBindingNavigatorSaveItem_Click(
sender As Object, e As EventArgs) Handles StudentsBindingNavigatorSaveItem.Click
Me.Validate()
Me.StudentsBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyDataSet)
End Sub
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'MyDataSet.Students' table. You can move, or remove it, as needed.
Me.StudentsTableAdapter.Fill(Me.MyDataSet.Students)
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Me.StudentsTableAdapter.FillBy(Me.MyDataSet.Students, ComboBox1.Text)
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
Me.MyDataSet.Students.AddStudentsRow("Jane", "Adams", "Female")
End Sub
End Class
Get new key taken from
this article.
Public Function AddNewRow(ByVal sender As Customer, ByRef Identfier As Integer) As Boolean
Dim Success As Boolean = True
Try
Using cn As New OleDb.OleDbConnection With {.ConnectionString = Builder.ConnectionString}
Using cmd As New OleDb.OleDbCommand With {.Connection = cn}
cmd.CommandText = InsertStatement
cmd.Parameters.AddWithValue("@CompanyName", sender.CompanyName)
cmd.Parameters.AddWithValue("@ContactName", sender.ContactName)
cmd.Parameters.AddWithValue("@ContactTitle", sender.ContactTitle)
cn.Open()
cmd.ExecuteNonQuery()
cmd.CommandText = "Select @@Identity"
Identfier = CInt(cmd.ExecuteScalar)
End Using
End Using
Catch ex As Exception
Success = False
End Try
Return Success
End Function
In closing I have not given you a solution but hopefully given you some stuff/logic to assist with this issue, if not perhaps I missed what you want conceptually speaking.
Additional resources
http://msdn.microsoft.com/en-us/library/fxsa23t6.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Create single message in receiving side for each record in the sender file

Similar Messages

Maybe you are looking for