Graphical view for confirmations

Hello,
Can some one tell me the transaction code for viewing the graphical view of confirmations done for the operations of PM order? The Sap tcode for checking the data of hours of plan vs actual is S_ALR_87013432.
Regards,
Narendra

Hi
SAP Note 1028482 Approval preview: Tabular display instead of applet
The following note gives you the option of choosing either the table display or the graphic display as default :Note 1077956 - Follow-on document display: Tabular displ instead of applet
please check the above notes recommended by SAP.
regards
Muthu

Similar Messages

  • Lineitem detial for confirmation/produciton order-othr thn 0pp_c03/0pp_c01?

    Dear Friend,
    I am using 0pp_c03(work center view) for confirmation order detial But while first full load  i am getting latest total record i.e. order confirmed on 4 diffrent days than we are getting sum of confirm quantity of all 4 days with latest confirmation date
    same with when using 0pp_c01(order view) for produciton order detial But while first full load  i am getting latest total record i.e. order confirmed on 4 diffrent days than we are getting sum of GR quantity of all 4 days with latest confirmation date
    this above records we can compare(matching) with coois transaction of ECC.
    are there any other infoprovider(Cube. Ods. Multiprovider, Infoset. etc....) for getting line item wise detail   i.e. if confirmation or GR done in 4 diffrent day for same order than i want all 4 days confirmation quantity & GR quantity's with its posting date in 4 diffrent line(not like that 0pp_c01/0pp_c03 - sum of all 4 days quantity with latest date performed in system)?
    Regards
    Dushyant.

    Hi All,
    Is there any other cube/ods/multiprovider from where we can get this lineitem wise detail?

  • T Code for Graphical view of OM

    Hi Friends,
      What is the TCode for Graphical view of OM

    Hi ram,
    go to ppom_old, search for your org.structure then click once the root then at mid top you can see the button for structural grahics view. the one with color blue,green, red and yellow. it looks like a building graphs.
    their is no tcode for this but you can use short cut from ppom_old click shift +F8.
    thank you.
    toti

  • CM14 BI Publisher - modifying an existing Data Model, the Graphic View in Query Builder does not display

    I am trying to edit the default forms/reports that come with CM14, trying to edit the data model, data set, (to get to the old Infomaker style graphic view) , the Query model does not display (error the list of tables is too long..) Oracle tell me the limit is 60,  there are not 60 tables referenced in any CM report.
    Does this Query builder view work at all on any report?
    (bigger question, we are moving from CM12, should we move to CM13 which works with infomaker?)
    Thanks,
    Paul L

    Kurt, thanks for your replies.
    A couple of notes/clarifications.
    1.     You are correct that BI works better in Firefox--I have observed issues with the BI display when using IE.  I would recommend using Firefox too.
    2.     You are correct about the way to get to the Query Builder to see a graphical view of data tables.  There are basically two issues with this that I mentioned, but will re-iterate:
    a.  If you have an EXISTING query in the data set, then click the "Query Builder" button, this will remove the existing query that's there, it will NOT display the existing query in the query builder.  Query Builder works only to create a NEW query from scratch.
    b.  Query builder is limited to selecting 60 fields max in your query.  If you are creating a large report with many tables, you may find that 60 fields is not enough.  For that you will have to work in the SQL edit screen rather than using the query builder.
    I would impress on anyone developing CM14 reports that they become familiar with the database schema and relationships to avoid problems when developing your BI reports.  You should be able to find the tables and joins documentation in the knowledgebase.

  • Reg:Graphical view in workflow

    Hi to all,
    Now i am having IDES ECC 6.0 , I had put the TC SWDD i am getting workflow screen. But i couldnt find out the graphical view of that screen.But the graphical view and all i can get through ECC 5.0 version.
    Kinldy do the helpful.
    Thanks,
    Sankar M

    Hi Rob,
    I am working in IDES ECC 6.0 , In that i gone to SWDD->EXTRAS->options->Modelling view -tree only is there. I couldnt change into Graphical network.That particular Modeling view button is in disable mode.What can i do for that?
    Thanks,
    Sankar M

  • Help me choose a good Graphic Card for my Laptop

    Hello guys, first let me say I'm glad I've found this forum, It's been some time that I wanted to decide and buy a new graphic card for my laptop, but I guess this is the time and I'll start by asking for some help from you.
    My laptop is HP Pavilion g6, the specs are the following (using CPU-z)
    CPU: http://prntscr.com/5fqo9f
    Caches: http://prntscr.com/5fqohx
    Mainboard: http://prntscr.com/5fqomk
    RAM: http://prntscr.com/5fqos4
    SPD: http://prntscr.com/5fqoxh
    Graphics: http://prntscr.com/5fqp1b
    I wanted to ask you what kind of graphic card would suit my laptop, and which one do you recommend me buy?
    I would to play all the latest games... I believe I need another 4GB of RAM memory, and I believe my CPU is good enough, what do you say guys?
    Thank you!
    This question was solved.
    View Solution.

    Hi,
    What is the model/product of your laptop ? Generally speaking: we can't upgrade video card for nearly all laptops.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • The drop down view by menu (Song, album, etc) at the right side of the iTunes window is like a ghost. It flashes into view for a millisecond once in awhile but never lets me click on it. Anyone know what this is about and what to do?

    The drop down view by menu (Song, album, etc) at the right side of the iTunes window is like a ghost. It flashes into view for a millisecond once in awhile but never lets me click on it. Anyone know what this is about and what to do?

    Short answer:
    Click Hide Song(s), it is what you wanted to do...
    Long answer:
    iTunes in the Cloud is a feature of your iTunes store account that allows you to redownload or stream your past purchases. When you delete a purchased track that is downloaded to your computer (like the first one shown here) you are asked if you also want to hide the song from iCloud. This would remove it from the computer and also stop it showing up with the iCloud symbol as the other tracks from that album (which are not downloaded) do.
    If a track shows with the cloud symbol you can play (stream) it by double-clicking the title, or click the cloud symbol to download a local copy to your library. If you try to delete one of these tracks you get a slightly different message confirming that you want to hide the track. Clicking hide will remove the listing from the library and any other device that shows your past purchases.
    Should you want to retrieve any item hidden in this way at a later date use Store > View My Account > iTunes in the Cloud > Hidden Purchases > Manage.
    To hide all your previous purchases that are not downloaded to your computer use Edit > Preferences > Store and untick Show iTunes in the Cloud purchases.
    tt2

  • Is nVidia Geforce GT640 good graphics card for PrE10 despite low memory bandwidth?

    Can anybody confirm that the nVidia Geforce GT640 is a reasonable graphics card for Premiere Elements 10 and Photoshop Elements 10?
    The person who assembled my Core i7 3770K desktop with 16Gb of RAM at 1600mHz installed the nVidia GT640 card with 2Gb of DDR3 memory. He said that this was a good (fairly low cost) card for video editing because it has 384 CUDA cores - very helpful in video editing. I am pretty ignorant about graphics cards, but like the low power usage, 65 watts, and reputed cool operating temperatures. I have since read that DDR5 memory would have been much faster because of greater memory bandwidth - say 80-90Gb per second compared with 28.5Gb per second for the DDR3 memory on the GT640 card. I was after economical power use. DDR5 cards use 110 watts upwards and run much hotter than DDR 3 cards, all other things being equal. The really fast cards require special power units and cooling.
    Does anybody know whether limited memory bandwidth is important in video editing? Is speed much more critical in gaming than in video editing? Are other attributes such as 384 CUDA cores, nvenc syncing, dedicated encodment, 28nm Kepler architecture, 2Gb memory frame buffer, 1.3 billion transistors, plenty of texture units -  more important than memory bandwidth in video editing? Does bandwidth limited by DDR3 memory affect quality of image?
    I read that the GT640 would be much faster (producing better image quality?) than the HD4000 integrated Intel graphics of the Core i7 Ivy Bridge processor. Is this so?
    Windows 7 Home Premium 64 bit and all programs are installed on a 120Gb OCZ Agility 3 solid state drive. My data drive is a 1Tb Seagate SATA 3 at 7200 RPM. I have a beautiful 21 inch ASUS vs228n LED monitor and LG blu-ray burner.
    I did lots of editing with PrE 3 with a Dell 3.06 gHz hyperthreading desktop and Win XP. The output and even the preview monitoring was clear and stable. I am still capturing standard definition mini dv tape by firewire from a 3MOS Panasonic handycam, but plan to upgrade to HD 3MOS with flash memory. I make the preview monitor really small - about 7cm wide - in PR10, because the quality of the preview picture is much poorer than the quality that I experienced with the Premiere Elements 3 program with Win XP. Is this just an indication of memory-saving in PrE 10 previews? I expect output to be much superior, although still mpeg2-DVD quality until I upgrade my camera. I have set rendering on maximum bitrate.
    Anyway, despite these reservations with preview quality, the GT640 seems to be performing fine. Picture quality in Photoshop, online and elsewhere on my computer is excellent.
    I updated the nVidia display driver only yesterday to version 306.23.
    Nearly all graphics cards forums are about gaming. I hope to see more forums about graphics in editing here.
    What do you think of the 2Gb nVidia GT640 for editing with PrE 10 and Photoshop Elements 10? What would you say about picture quality in the PrE 10 monitor versus quality of output? Was picture quality in the PrE 3 monitor sharper and more stable, as I imagine?
    Regards, Phil

    Sheltie,
    Thank you for the kind words. We all work very hard to help others with video-editing. Some of us also show up on other Adobe forums, depending on the products that we use most often.
    Besides helping out, I also find that I learn something new every day, even about programs that I have used for decades. Heck, I just learned something new about PrE vs PrPro (my main NLE program), when I went to try and help a user. I probably actually use PrE more to test my theories, or to replicate a user's problem, than I do to actually edit my videos. Still, when applicable, I do real work in the program.
    With about a dozen "regulars" here, if one of us is not around, several more usually are. Personally, I do not understand how Steve Grisetti and John T. can dedicate so very much time here. Steve is a noted author of books on PrE, PSE, Sony DVD Architect, and others, plus helps run a video/photography Web site, Muvipix.com, that is very active, and has so very much to offer. John T. is always under the watchful eye of The JobJarQueen, and gets dragged, kicking and screaming, out into the yard, or up on his roof, so can be gone for a bit.
    Neale usually beats us all, since he's in the UK, and normally answers all the questions, that come in too late for us to see. He is also a PrE power-user, so beats me hands down.
    I travel a great deal, but no one ever misses me. Was supposed to do a trip to Sydney last Dec., but had to cancel. Have not gotten details on the reschedule of that trip, but it would have been my first jaunt south of the Equator. Gotta' make that happen.
    Good luck, and happy editing,
    Hunt

  • Static Credit check at Sales Order for confirmed quantity only.

    Dear All,
    I am facing two problems and would really appreciate if you could give some inputs on it.
    If a SO is of 100 tons and the confirmed quantity is 10 tons then the credit check is happening  for the value of confirmed quantity only as per the requirement.
    1. But after releasing the SO using VKM3 I have to carry availability check again in the sales order as the confirmed quantity is becoming zero. Pls tell me how to control this, the confirmed qty should not change.
    2. If I increase the confirmed quantity to more than 10 still the system is allowing me to create the delivery without blocking for credit check again as I had released the SO credit for value of 10 tons goods only .
    Regards,
    Abhilash

    HI,
    1) T-code OV27- You have not maintained confimation block here.
    2) T-code OVA8- Select the  credit settings and double click it.You get Display View "View for maintenance of automatic credit control" .
    Maintain the deviation in "released documents still unchecked" section.
    Thanks,
    Vrajesh
    Edited by: Vrajesh Nayak on Jul 24, 2008 5:28 AM
    Edited by: Vrajesh Nayak on Jul 24, 2008 5:35 AM

  • Organizational structure graphical view

    Hi Friends,
    we have problem with the organizational structure graphical view in OM. the system can not read the texts fonts, we don't use english characters. what should we do?
    Thanks

    Hi there!
    Hope you both don't mind but I am piggy backing on your OM discussion. You both sound like have good experience in working with Turkey. I am trying to find a standard infotype to store a Turkish Identification no, SSN, and Local ID card numbers. I am leaning towards IT0185 but first want to check around to see if there are Turkish infotypes specifically for these types of documentation. Your feedback is greatly appreciated.
    Thank you in advance.
    Dina

  • Changing the Chart Title in Graphic View in Interactive demand Planning

    Hi All,
    Is it possible to change the Chart title in Graphic View in interactive demand planning screen.
    When we go to interactive planning after loading the data we go to Univariate forecast then switch to graphic, the chart title shows the selection at which the planning is done. For eg; If I plan at die level and i select a particular sap material, the chart title displays Die value and not the material value.
    Is it possible to change the chart title such that it displays all the selections made in selection winodw, like in the above case both Die value as well as SAP Material Number.
    Thanks and Regards,
    Diana

    Dear Diana,
    unfortunately this is not possible.
    The chart title is build from the planning book name + the Show characteristic in the shuffler (+ available nav. attributes of the Show char).                                                           
    The functionality you requested doesn't exist in standard.            
    Regards,
    Tibor

  • Photo Viewer for Mac

    Is there an equivalent of Windows photo viewer for the mac?  I don't want to edit images in it, I just want to view in full screen and to go forward and back thought the images, with simple options to 'view at 100%' 'flip left/right', 'enlarge' etc. This is not big difficult stuff right?
    I've played with iphoto and dislike it enough to delete it, you can download free apps better than iphoto. I've tried both preview and quick look but don't like them at all.  If I select an image it always opens in 'preview' but the 'previous/next icons are always blacked out? Why? 
    If I use 'quick look' I can move forward/back using the keyboard but it never opens full screen, it always opens to the 'fit screen size' and then really irritatingly jumps about in size all over the place depending on the next image size.  It's ok if I drag it to full screen, after which it acts pretty much like windows viewer except there are no options to open an image in an editing app, view at 100%, enlarge, flip left/right etc.
    In short it's a poor viewer, I guess that's why it's called quick view uh?  Is there some amazing mac facility that I'm missing here. I could just about live with 'quick look' if it always opened full screen but can't see any way to do this.

    Preview IS the Apple version of Windows Viewer and its more powerful opening PDF, editing , JPEG, TIFF and other formats.it will even do audio !
    Oh and clearly you don't get iPhoto it is a viewer light editor and photo image database. Again far more powerful than Windows Viewer.
    Infact its data storage is based on industry standard Aperture.
    Quick view is effectively a built in PDF/inline viewer tool within the finder than allows just about any document to be viewed irrespective of format.Probably nearest to what Windows Viewer actually does
    It has no editing tools and that not its function.
    To open it full screen you hold the ALT key whilst clicking the document in finder
    You DO have the opton to open in a specific app at the top of a Quickview window by default it usually says Open Preview however just right click and a list of all potential applications are then listed. You then choose the one you want.
    When you select an image from the finder to open in Preview that's exactly what it does- Opens that specific image. IT does NOT load the entire folder because its a separate application - NOT part of finder !
    Again you need to work through iPhoto its really has more going for it than you think and no there really aren't better FREE apps out there.
    Oh and why the need for full screen viewing - THAT really is a windows hang out. MAC OS is designed such that windows open to the maximum size to display content rather than a locked full screen model by default.
    That said if you look in to top right of the window bars click those two divergent arrows you go full screen.
    Sorry to say you really have to change your work flow else you may just have to go back to Windows .
    As for alternative image viewer depends how much you want to spend and from the sounds of it nothing !
    Options
    Adobe Lightroom
    Adobe Photoshop Elements
    Adobe Photoshop (Full)
    Pixelmater
    Install the X11 OS UNIX environment and run GIMP
    Try out Graphic Converter.
    Anything else ?

  • System not displying in graphical view in solution manager

    Hello,
    I added 10 system in solution manager for centralize monitoring but 8 of them are displaying in graphical views another 2 system are not displaying . all the systems adding procedure is same. but still 2 of them not displaying in graphical view can anyone tell me the chouses of this type of error .
    Kindly guide me to short out this issue
    Thank you
    Deepak

    Hi,
    Open your Solution of the affected systems (12 Systems not appearing in your Monitoring). Go to Solution Landscape Maintenance (Under Solution Landscape).
    Compare the Leading role of the solution with the role of the system in the logical component.
    If these are different, right click on the system and select Put in Solution.
    Hope this helps.
    Feel free to revert back.
    -=-Ragu

  • SRM 7.0 Approval Flow in Graphical view

    Hi experts,
    I'm upgrading from SAP SRM 4.0 to 7.0.
    In SRM 4.0 I was able to view, in a shopping cart, for example, the approval structure in graphical view and in a table view.
    In SRM 7.0 I can only see the approval flow in a table view. How can I see the approval flow in a grapical view?
    Thank you,
    R Silva

    Hi Silva
    srm 7.0 - Only Table is only AVAILABLE. no more graphical overview in SRM 7.0 on wards.
    SRM 4.0 /5.0 - Table as well as Graphical over view are available.
    graphical overview was not supported in SRM 7.0 on wards as per standard.
    Muthu

  • DB view for union of table

    hi guys.
    Is it possibile to create an ABAP DataBase view for an UNION ALL of 2 tables with same fields ?
    From SE11 is possible to create only joined tables, i think...is it true ?
    I must split records of one custom table into two tables (active records and archived records); so, i thought to create an union all (view) to semplify modification on abap programs needs both tables's record.
    thanks a lot.

    hi.
    Thanks for confirmation it isn't possible to create union on abap DB view (se11).
    for Yukonkid:
    - on sql-92 "union join" is included
    - "SELECT form both tables and "union" them in an internal table"...a DB view intend to be a same solution but more easy to develop (easy=few abap's rows)
    for Sneha:
    my target is performance: i have a big table (a lot of rows) with 95% archived and using index not resulted a good solution
    bye

Maybe you are looking for