Grayed out "No Wi-Fi" option in settings on 3.1.3. Help please.

So ive never had a Wi-Fi problem on my phone till this morning. Everything was running fine last night. I plugged my phone in my computer let it sync then turned off the phone to let it charge overnight.
When I turned it on this morning I noticed my wifi icon wasn't there anymore. So I went into the settings and it says for WiFi that "No WiFi" and the option itself is all grayed out. I tired rebooting the phone, a hard reset and resetting of network connections nothing worked. I was going to try to do a restore then when I hit the button and window came up and told me that it would erase all the data on the phone and the newest operating system would be installed.
Thats a problem for me. I've had iOS4 before and I hated it so much I returned that phone and got a replacement 3GS with 3.1.3 installed. Can anyone help me out with this?

I don't know if anyone cares or not but I just got back from the Apple store it was a hardware issue with my phone so I got a replacement 3GS.

Similar Messages

Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please.

Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please before I throw it through the window!

Grum12 wrote:
Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please before I throw it through the window!
Hi Grum,
If the formulas aren't filling to the new column, you must have changed something in the template since you first opened it. Numbers is rather fussy about filling row content in columns as they are added. Only rows with the same expression in every Body Column will fill when a column is added. Just as an experiment, start a new Employee Schedule document from the Template Chooser and then add a column by clicking the Add Column handle in the upper right corner of the table. If that works, as it should, then think about what might have changed in your working document to disconnect that feature. Maybe we can figure it out together.
Jerry

New iPod Touch with grayed-out "No Wi-Fi" text in Settings

Just got a 16GB iPod Touch as a refurb. from Apple Store. I install iTunes, hook it up to my computer, follow all the instructions, and then after it's charged, disconnect it to begin using it.
First thing I do: try to set up the wi-fi. Only problem: I go into Settings and at the top, where it says "Wi-Fi" it is grayed out, and says "No Wi-Fi" next to it. In the About section, it says "N/A" for MAC address.
I have turned the unit off and on, performed a soft reset, a full restore through iTunes, and even paid the $4.95 to upgrade the OS to 3.1.2, thinking that version 2.x might be the problem.
Still... no Wi-Fi. According to Apple's site, refurbs are supposed to be fully tested and brought back up to factory spec before being shipped out. What hhappened to THIS unit? How'd it make it from China to my porch without anyone at Apple ever turning it on to see if the wireless chip in it even works?
Now I've got to go through the hassle and delay of exchanging it and waiting for the replacement to come in the mail from half a world away. Here's an idea, Apple... sell refurbished stuff that works with the guarantee that if it doesn't work or if it's defective, the customer is guaranteed a brand new unit as a replacement. Maybe that will light the fire under the techs to make sure they don't send out broken equipment as "Apple Certified."

I completed the instructions in the linked knowledge base article. It did not fix the problem. Apple has agreed to replace the unit after I ship it back to them. I will now have to wait another week before another refurbished unit arrives from half-way around the world...
I think my problem with this whole thing is that Apple specifically touts the fact that refurbished units sold through their online store are extensively tested and will work like a brand new unit. Obviously nobody even turned this unit on and went to the basic "About" screen in Settings to see if wireless was working. They would have caught the problem right away.
This is a check that should have taken 5 seconds for a technician to perform and would have saved me the disappointment of having the first iPod I've ever owned be a lemon... and saved me another week of waiting for a gizmo that I had expected to be using already. Don't sell Apple Certified refurbished stuff unless you're going to actually turn it on and make sure it works!
My other complaint... the rubber seal between screen and metal case is bulging out at two corners. It looks shoddy and cheap. I don't know who worked on this particular unit, or if this is par for the course with Apple. If the next one looks shoddy too, or has any problems, it will be my last time trying to get an Apple iPod. I got refurbished since I don't have much money - and I just can't justify spending the amount they charge for a new one. One more try Apple...

Using photoshop elements 13 but the option to crop a single image is grayed out and also the option to crop a scanned image into individual pictures is grayed out - any ideas?

The option to crop an image is always grayed out or unavailable - both for single images and when I want to crop scanned images into individual pictures. Any idea what I may be doing wrong?

Did you try using the crop tool to see if it is working? See the tool I am talking about.
I suspect you are in Guided Mode rather than in Quick Mode or Expert Mode.

Gray out site-level profile options

Hi All,
Kindly let me know if there is any sql statement for graying out site-level profile otion for all the profile optinos.
So that the dev user can only modify the profile options at user or resp level but not at the site level.
Kindly help me out with some sql query which can gray out the site - level field at profile options.
Thanks is advance.

Hi,
But they can simply login to Application Developer responsibility (assign it to themselves if they do not have it as they have access to System Administrator) and revert all the changes :)
If each use has his/her own username, you should be able to know who is the one who updated the profile option value.
As mentioned in my first reply, update the site updatable columns in the table, this should stop the users from updating those profile options (try this on a test/dev instance and take a backup of the table first -- please do not apply the same on your production instance).
One other possible workaround/solution would be using forms personalization to hide the system profile option values at the site level but again if some one has the apps password and System Administrator responsibility he should be able to disable the code.
Thanks,
Hussein

MG 3250 grayed out 2 sided print option (Yosemite 10.10.3)

yosemite 10.10.3printer driver 12.3.0.0 have deleted and re-installed printer when printing using airprint option 2 sided can be choosen (but other options are limited) when printing using driver (to enable lower qulity printing - i.e. fast) - double sided is a grayed out option - and no matter which options are utilised it will not highlight. is there a solution ? thanks

Solution found by trial and error. You may wish to note it for future reference. Under "Printer" there was a line, "Nearby printers", showing another version of "Canon MG5300 Series" - I clicked on that and it showed "Configuring printer" for a few seconds. A new printer by the same name appeared in the "Printers and Scanners" section of System Preferences. Then, when I clicked on the options window (at that point showing "Copies & Pages"), the layout was back in the order I was used to when 2-sided was an available option, and (glory be!) when I clicked on "Layout", up came a beautiful black lettering version of the "Two sided:" box. Click on that and I get the familiar options of "Off / Long-Edge Binding / Short-Edge Binding". I hope this helps others facing the same problem.

Grayed-out airport and bluetooth options (pulldown-menu)

Hi,
since the last week, i got some trouble with pulldown-menus of the desktop menu-bar.
everything in an apple (no third-party stuff) pulldown menu is grayed-out.
grayed-out:
bluetooth
airport
battery
time machine
working:
MobileMe
Audio
Language
Time
still i can change these options through the system preferences.
i tried the basic, "switch of and on" but this does not work.
because i do not have any more ideas and this problem is a little peeving, i hope someone here can help me.
thanks in advance!
Ps.: sorry about my language abuse
Message was edited by: freeman339

you mean in the sharing and permissions for the airport utility?
if so, yes. i'm running as admin there.
i can change networks through the system preferences menu. but not through the finder ribbon under the airport signal fan

My wifi won't turn on at all. Even when I try switching the wifi button to on, it's just grayed out. So it's stuck on off. I need help

My wifi won't turn on at all. Even when I try switching the wifi button to on, it's just grayed out. So it's stuck on off. I need help

Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.

Audio Video Settings.....HELP PLEASE!

Greetings, I just purchased Final Cut Pro and I have a Canon Vixia HF20 camera. I am trying to import footage into FCP. I'm not sure what my settings should be in order for me to get the best quality. My camera uses a usb plug to connect with my computer does this affect the quality? what are the correct settings for import??? Please help, ANYONE

Aha ... the problem with the Canvas window is that it is not really intended to be used as for full resolution monitoring, indeed it can't be used for that, its just a proxy representation of that full quality image. Monitoring should, if at all possible, happen on a dedicated external reference display ... folks add I/O solutions to their systems specifically for this reason (amongst others). These days we are lucky to have an ever increasing number of inexpensive solutions from the likes of a Blackmagic Design, Matrox, Motu and AJA ... if you are intending to work professionally or semi-professionally with todays HD formats then you'll probably want to add something like that to your system so that you can edit with a little more confidence in your images. For starters, have a look at the Blackmagic Design Intensity card or the Matrox MXO2 Mini.
Hope it helps
Andy

Ibooks author inspection widget: grayed-out title and caption options when object is selected

I'm trying to add titles or captions to photos in an iBooks Author project. I select the photo, click on Inspector and Widget, then Layout. The only active option on Layout is the Accessibility Notes. Is this a bug? What am I missing?

Right.
You can create text boxes next to an image for title and caption, but otherwise, those are attributes for a widget with media.

I'm trying to turn off the "Handoff" feature. When I go to "settings and then general" I do not have the option to turn off "Hand Off". Help Please

Can't seem to make this work. I am up to date with my updates on both I-Phone and I-Pad. The "Hand-off" feature is working, and I don't want it. How do I turn it off? I don't have the option to do that when I go to General & Settings. Is it located somewhere else? Apple says that is where it is. What am I doing wrong, The "wonderful feature" is driving me crazy. Surely it is others also...
Deb *******
<Edited by Host>

Hi debinarizona,
I see the Handoff setting under "Settings > General > Handoff & Suggested Apps".
Connect your iPhone, iPad, and iPod touch using Continuity
Best Regards,
Nubz

Encoding settings on Imovie...Help please!

I wonder if someone can help. I have made a video for the school that is 4.2 GB heavy, dvd is 4.7 GB and iMovie says it's too big to burn. It tells me to change encoding settings but I don't want to loose quality. Has anyone got any suggestions please? Will changing to High quality or professional quality affect the quality of the DVD? Thank you very much for your help. Regards, Aida

iDVD encoding settings:
http://support.apple.com/kb/HT1502?viewlocale=en_US
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced two-pass technology to encode your video (The first pass determines which parts of the movie can be given greater compresson without quality loss and which parts can’t. The second pass then encodes those different parts accordingly) , resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

HT3964 hi if my mac will not turn on, have unplugged, removed the battery, did control option and esc still to no avail help please

If a macbook pro will not turn on, the screen is black, have unplugged, removed the battery, have done command option and esc to no avail, also once battery was removed held down the power button for 5 seconds still no working screen,. However when not plugged in the green light appears on the bottom front of the computer and it stays green after a few minutes it stays green then goes out. Help!! .

In that case, the computer is dead, probably with a logic board problem. Take the Mac to an Apple Store to get your computer diagnosed and repaired

I have a new iphone 5C. How can I turn off the passcode. It does not have 'Passcode' in settings - general -. Can anyone help please.

I have a new iphone 5c. How can I turn off the passcode. Unlike previous models it does not show Passcode under settings - general !! Can anyone help? Susie

Thank you Chris. Yes I did know that but it was not clear how to turn it off. All the forums visited said it was under general. I have since found a site called iAnswerGuy which describes how to turn it off step by step. Thank you very much for coming back to me so quickly. Susie

I have recently downloaded 3.6 and now cannot retreive yahoo e-mail through bookmarks. Firefox is embarrassed and I'm pissed off. Have changed firewall settings to no avail. Help please

operating system is windows vista home premium. I have changed my firewall settings to add and allow firefox. Now what??? I should have never downloaded this new version. Shame on me "If it ain't broke don't fix it" Right?!?

operating system is windows vista home premium. I have changed my firewall settings to add and allow firefox. Now what??? I should have never downloaded this new version. Shame on me "If it ain't broke don't fix it" Right?!?

Grayed out "No Wi-Fi" option in settings on 3.1.3. Help please.

Similar Messages

Maybe you are looking for