GRC 10.01 - RCM report to be added with control relevance fields

Hi GRC Experts,
I
I need to add Control relevance fields into the RCM report - Risk and control Matrix. I added through the IMG node as below:
Governance, Risk and Compliance-->Reporting-->Maintain Report Column Settings and selected the F7 report and clicked the columns and added the fields CN_RELEVANCE and CN_RELEVANCE_T. It worked fine in the Development system.
When I moved the transport into QA, the RCM report is not having any columns to display and it says 'Table does not contain visible columns'.
Appreciate any help on this issue.
Regards,
Saran.

Hi Ravi,
Can you try in the following IMG path.. I never faced this, but gut feel says importing report from 000 should help
IMG Path is Controlling > Cost Center Accounting > Information System > Standard Reports
Regards
Ajay M

Similar Messages

Report similar to Se16 with customized input fields

Hi
I have to create a report which is similar to SE16 for j_1abcd some table and the user should see customized input selection screen and He would enter data and it should display all the data satisfying the selection Screen
It should then display a List where he can select one or more lines and there should be some button to edit or delete data.
Which is the best method to do this?
SHould i use table control or ALV or normal report for this?
Pls suggest the best way to do this in the least time.
George

Why don't you just creat a Maintenance Table on SE11??? You could maintain the table on <b>SM30</b>...Otherwise...You use do an OO ALV....
Greetings,
Blag.

Problem Occurs when CFL is added with User defined field

form-672-BOM
item-3-datagrid
U_EmpNo - user defined field column
if i will give following codes under form load event will CFL bound with U_EmpNo
or else plz suggest me with write codes
oForm = SBO_Application.Forms.Item("672")
            oItem = oForm.Items.Item("3")
            oClmn = oItem.Specific
            oClmns = oClmn.Item("U_EmpNo")
            oClmns.DataSources.UserDataSources.Add("U_EmpNo", SAPbouiCOM.BoDataType.dt_SHORT_TEXT)
            MessageBox.Show("Did")
            AddChooseFromList()
            oClmns.DataBind.SetBound(True, "", "U_EmpNo")
            oClmns.ChooseFromListUID = "CFL1"
            oClmns.ChooseFromListAlias = "CardCode"

hi

GRC 10.0: Customizing Reporting with field ID's

Hi everybody,
we need some reports which are delivering some special information. These informations aren't exist in any of the standard reports. So we would like to customize them.
I know there is a customizing table V_GRFNREPCOLUMN how to adjust the available reports and I do it like the instruction:
1) Copy an existing report
2) Check all the technical adjustments
3) change the columns for this report
But there is one problem: The field ID that I need is not available. There are more than 2000 field ID's but not the one that I need. I don't need a custom field because the information is still excisting in the data dictionary. I know the SAP table and the field ID.
For example:
We need a list/report where you could see all the control owners of every organisation. I couldn't found a report and I guess there is no one in the SAP standard. After copying a standard report I couldn't find the right field ID. There is one for owners of subprocess and processes and also one for cross regulation control owners, but not for the e.g SOX control owner.
I try to search in which SAP databse table the information is saved. It is HRP1852. The field ID is (I guess) USERNAME, but this field ID is not available in the customizing of the reports.
So is there a possibility to enlarge the range of the field ID's?
We could programm our own report, but this would be too expansive and I just want to use the possibility of the standard report customizing.
Thanks a lot
Regards Timo

Hi,
I have just checked my SICF settings and found that we have not actually activated those services at all and our NWBC sessions work fine now.
Have you activated the sap/bc/nwbc and sap/bc/webdynpro services?
Also, have you activated the required BC sets for the standard content on Access Controls? This removes the need to do a lot of the basic setups but you still need to follow through the event linkages to check the successful generation etc.
Simon
Edited by: Simon Persin on Sep 21, 2011 5:51 PM

Required components for Forms&Reports 11.1.2 with SSO support

Hi.
Dont know if this is the right forum but I would like to know if any of you has an experience in integrating Forms&Reports 11.1.2 with Oracle Access manager.
I am in process of upgrading Oracle Forms&Reports 10g configured to use single sign-on to 11.1.2 with Identity and Access management for SSO support. As I read the installation manual I got confused by how to integrate Forms&reports with Access manager to be able to configure it to use single sign-on with MS Active Directory authentication. I am not sure is there enough just to install Access Manager or the installation also requires Identity Management component.
I would appreciate if one could point me to the right direction. Thanks.
Best regards.

I recommend starting with baby steps. First ensure that the FMw installation is working. Can you run a form, and report, and so on. Then add single-signon with OAM. Verify that it is working. Then add AD support. If you try to dive directly into making AD work and something before this step wasn't working, you will have a difficult time troubleshooting.
Generally speaking, if you have OAM and SSO installed prior to installing FMw, connecting the two is fairly easy because the FMw installation will prompt you during the process. However, even after the fact, linking up can be done from within the EM console even though some external steps may be needed. Once this is working, they you can investigate adding AD to the mix.
If you already have OAM installed, you are ready to dive into the Forms Deployment Guide.
http://docs.oracle.com/cd/E24269_01/doc.11120/e24477/sso.htm
This part of the Deployment Guide will cover things like, which versions of the Identity Management components can be used with Forms/Reports 11.1.2. It will also discuss the functional information need in order to understand how it all works together. Also included are instructions on how to connect the FMw installation to sso. Be careful as you read any of the documents as it is easy to get confused when seeing references to "SSO". In some cases, the term "sso" means single signon and in others it is referring to the product, "Oracle SSO".
Information about using Active Directory is scattered around the IM documentation, but this is probably a good place to start:
http://docs.oracle.com/cd/E23943_01/oid.1111/e10031/odip_actdir.htm

Reports XI: Infoview behavior with Row Level Security

Post Author: pwilliamsbssp
CA Forum: General
I have a report that is based off a business view that has project information with an additional table used to assign report users to certain clients (each project has a client). A filter is used to assign the report user to the current ce username.The report is scheduled by the administrator login. Each user goes to view their report on Infoview and is able to view data for only those clients specifically assigned. This functionality seems to work fine - everyone views one instance of the report and InfoView assigns the row level security.However, I'm running into a problem viewing report histories when adding or changing client assignments. The historical reports come up either blank or with erroneous information (such as the current week's information instead of the previous week's data saved with the instance of the report). I have not found a logical link between the behavior of the historical reports and the specific users. Some can see one week and not another while others have the reverse, regardless of their security assignments.Does anyone understand the behavior of view historical reports with row-level security? I have no idea what data/metadata is saved with each report instance and when the row-level security is being read. Is it read when viewing the report? or, is it specific to the structure of the data when the report was run?With other reports using the same row-level security model I'm able to view the historical reports although it has the client assignments at the time the report was created. But, at least I'm able to view the reports.Any insight welcome.Patrick Williams

Post Author: pwilliamsbssp
CA Forum: General
Bump. Anyone is welcome to tackle this question. Please.

In ALV report.The user wants to hide specfic fields

Hi
In ALV report.The user wants to hide specfic fields but the user must be able to add these fields to the report:
can any one give the suggestions

in reuse alv list display or grid
i_save = 'A'.
now user can choose the layout.
for hiding
in fieldcat
wfieldcat-No_out = 'X'.
regards
shiba dutta

While generating a crystal report can we edit database fiels in field explorer (at middle can we edit database fields)

while generating a crystal report can we edit database fiels in field explorer (at middle can we edit database fields)

Wrong forum to post the question, try to post the question in crystal reports community.
Its not possible to edit the database fields while creating the reports, its only used to call the rows of values in it. Can you explain me in detail what are you actually looking for .
--SumanT

While generating a crystal report can we edit database files in field explorer ?

Hi,
while generating a crystal report can we edit database files in field explorer (at middle can we edit database fields)
Regards,
Mahendra

Wrong forum to post the question, try to post the question in crystal reports community.
Its not possible to edit the database fields while creating the reports, its only used to call the rows of values in it. Can you explain me in detail what are you actually looking for .
--SumanT

Report for failed delivery with reasons

Hi all,
Maybe i am blind, but I cant find a way to do an automatic report or email a report for bounced emails with details.
So I need to get a report with the email address, message number and the reason for the bounce or failure for Example: bounced by destination server. Reason: 5.1.0 – Unknown address error ('554',
Any where I can do this?
I see the bounce logs have this information, but short of ftp'ing this daily then writing a script to email this out I cant see how to do this.
It would be nice to just have a daily email report
Regards
Adam

On box - no easy way that I can think of other than what you've mentioned. You could however accomplish this (as well as any other custom reports you would want to create) with SawMill (https://www.sawmill.net).
This used to be used heavily back when the WSA was first released as on box reporting wasn't up-to-par. However, it can be used for the ESA as well.

Report for CS15 tcode with multiple material nos. in selection screen.

I want to develop a report for cs15 but with multiple materials.
Like in cs15 we enter the material and its plant, then click on multi level check box and get the output. But cs15 works only for a single material. I want to develop a report in which i'll give multiple material nos. and then i should get the output for each material entered just as the output that would appear in cs15 for that material.
How do i do it.
I have tried but i'm not able to track back.

Hi Priti,
try develop a interactive report which lists all the materials in the first screen and when you double click on each of the material then call transaction CS15 output by skipping the first screen .Use set parameter to pass the material .
Regards,
Sirisha

Report printing in excel with multiple sheets

Hi Experts,
I am working in Oracle Reports 10g. I need to print the report in Excel....
For this i have created .JSP file and now printing in Excel(Sheet1).
My requirement is i need to print the report in multiple sheets.
For example if i run the departments report then the generated excel file should be as below
(Sheet1 - HR, Sheet2 - FINANCE, Sheet3 - MARKETING, etc.,)
How can i do this?
Thanks in Advance.

Hi All,
Is this possible Report printing in excel with multiple sheets??
Please give solution for my above post Report printing in excel with multiple sheets..
Thanks,
Su.gi

Report on BEx query with 2 structures (one in rows and one in columns)

Hi, experts! I have to make Crystall report on BEx query with 2 structures, one in columns (with KF's), and one in rows. Is it possible to create such report? Because when I create such report, I cant see fields in structures, only characteristics fields.
Ok, I found samr problem in another thread. Sorry.
Edited by: Mikhail Sychev on Dec 5, 2009 9:53 PM

Hey Flora,
Happy to hear that its working now.
Answering your question, again its upto the connection and report format you are using. Based on your question i hope you your report output should be like this.
You cannot map to two labels for the series, again this report format is possible only in cross tab through Webi. I would suggest you to concatenate the material and month in a dimension in webi like below.
I have done the concatenation in excel level, i would suggest you to do that in webi. Try to reduce the formula as much in excel.
or
If you are using Query browser connection, then i would suggest you to create a separate report which will display the actual vs plan material wise, here you need to pass the material as a prompt.
Hope this helps in clear, please revert me for any clarification.

Billing report with due date field

Dear Friends,
Can you please tell the logic of Billing report with due date field.
Input. billing document no, date range, sales organisation
Output : billing document no, sales organisation, Amount. Due date.
If any clarification required, Please let me know.
Thanks in advance
Ranjan

Is it VF05 is suffiant for your purpose?
use further selection criteria tab.
Amit.

Jump from alv report to qa03 screen based on PRUEFLOS field

Hi experts,
I developed one alv report ,in that one field name is PRUEFLOS (inspection lot number).I want to jump from alv report
to QA03 screen based on PRUEFLOS field.I wrote in this way but i didn't get.
FORM USER_COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
CASE SELFIELD-FIELDNAME.
    WHEN 'PRUEFLOS'.
      READ TABLE T_FINAL INDEX SELFIELD-TABINDEX.
      SET PARAMETER ID 'QLS' FIELD T_FINAL-PRUEFLOS.
      CALL TRANSACTION 'QA03'   AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.
what is the problem ?pls help me in this.

Hi Ram,
Recheck:
1) You have passed 'FORM USER_COMMAND' in 'I_CALLBACK_USER_COMMAND' while calling f.m. for ALV displa, and
2) You have checked the value of user command, i.e.
FORM USER_COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
CASE SY-UCOMM.
WHEN '&IC1'.
CASE SELFIELD-FIELDNAME.
WHEN 'PRUEFLOS'.
READ TABLE T_FINAL INDEX SELFIELD-TABINDEX.
SET PARAMETER ID 'QLS' FIELD T_FINAL-PRUEFLOS.
CALL TRANSACTION 'QA03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDCASE.
ENDFORM.
Regards,
Birendra

GRC 10.01 - RCM report to be added with control relevance fields

Similar Messages

Maybe you are looking for