Green tint when matting

while matting and using certain transitions, i notice a green tint to the video. This is especially apparent when fading out. Any suggestions on how to get rid of it ?
Thanks-

What is your source video and what are your sequence settings?
How does it appear on your NTSC/PAL production monitor?

Similar Messages

Why do my photos have a green tint when placing them into Muse?

I am placing photos of portraits into Muse and the colors look terrible. There is a green tint that dulls down the pictures.Top is one of the originals, and bottom is a screenshot in Muse.

sorry maybe Im not making my issue clear...thanks for answering anyway:
over the last years- but 15 weeks specifically I have downloaded photos from my camers card- putting it straight into the apple mac and then opening IPHOTO then i am able to click and put the pics into my folders in IPHOTO but as of 2 days ago - the camera card went in, the pics opened BUT there is an error message which states iphoto cannot save them to file......as they are JPEGS
I can see that others too have had this issue and there are 'answers' but I am a complete novice and cannot understand the answers given and need someone to 'hand hold me' through a step by step this is what you must do....
so hope that now is cleared as to why there is a 'problem'
hope you can still help me thanks for you time

Green tint when hooking G4 PowerBook up to LCD projection

I've been hooking up my G4 to external projection for presentations for a long time and then all of a sudden last week whenever I hooked up to display information to a group the projected image had a green tint. The image always looks fine on my computer but the projected display is really ugly and hard to look at. Any ideas on what the problem is?
G4 Mac OS X (10.4.5)

Hi lwb2000;
First issue: "Green tint" Possible cause - damaged DVI connector in Powerbook, monitor video cable not seated correctly, monitor video cable may be damaged, or monitor connector on video projector may be damaged. Inspect the connectors at all points in the chain.
Second issue: "display is really ugly and hard to look at" Launch Display Preferences in System Preferences and calibrate (under the 'color' tab) the projector monitor settings.
Hopefully this will help you.
Take care.

Green tint, DV Pal, Color 1.0.2

Hi
Faced one problem with Color 1.0.2
I am using Color and outputing to PAL.
The green channel gets shifted and the footage gets a green tint when importing graded footage into FCP.
Any ideas how to fix it? Tnx.
Yuri Prylypko

"Square" pixels versus "rectangular" issue.
When viewing DV files in QuickTime the size used to be reported as 640X480 (NTSC here) instead of 720X480.
http://docs.info.apple.com/article.html?artnum=302955
This document describes the issue although it relates to iPod exports

Macbook pro retina hdmi external comes out with a green tint?

I have a 2010 old macbook pro and that works fine but the retina comes out with a green tint when pluged in with hdmi.

I have already tried calibrating the display and i used a thunderbolt to hdmi converter and i had the same problem.

Canvas problem - green tint

My canvas window has a green tint when it should have been black (between the clips). I've checked my canvas settings and tried to fill the green spaces with slug, but nothing works...

Since it's come up, I must say I'm always surprised by how often folks seemingly need to trash preferences. Since installing FCP 4, I've had to trash preferences only twice. The first time was while running 4.1 (it turned out to be Jaguar issue, so it didn't help). The other time was the very first time I ran 5.0 after installation: the icon bounced on the dock, then nothing. Trashing preferences solved that - and that was after an Erase & Install of Tiger! - so who knows what the deal with preferences is. <shrug>
While Patrick brings up good points, I suspect luck has everything to do with it. Of course, mentioning this is probably like breaking a mirror - I get the sense I'm going to be handed 7 years of crashes and system failures for speaking of about all this.

Strange brief green tint changes in MPEG-4 bitstreams

I'm running into a strange issue that seems specific to QuickTime. When I try to play certain MP4 files containing MPEG-4 Advanced Simple Profile bitstreams, they play back generally okay, except that, when there's motion, everything will suddenly have a greenish tint, and then change back to normal colors. The bitstream seems to play okay with VLC, Elecard, Windows Media Player, and DivX, so it seems specific to QuickTime.
Interestingly, if MPEG-4 Simple Profile is used instead, everything is fine. This makes me wonder if this is an issue with how B-frames are processed.
Has anyone seen anything like this before?
Thanks for whatever help you might be able to provide.
-Robert
Windows XP

Thank you for your response!
We tried both the "Safe mode (GDI only)" and
"DirectDraw" in the "Advanced" tab under
"Edit - Preferences - QuickTime Preferences."
The intermittent green tint when there is motion
still appears in both cases. You mention a video card
issue. Do you know which card(s) showed this problem in
the past?

Why has my macbook pro developed a neon green tint to the entire screen?

i brought my laptop to costa rica and suddenly the screen has a neon green tint to it. i have restarted my computer 3 times and each time it has reverted to the green tint when i turn it back on. why is this happening and how can i fix this?

System Preferences > Displays > Color
Select the built-in profile for your display.

When I am streaming videos there is a dark green tint to the darker colors on the screen.

When I am streaming a video, there are dark green shades to some of the darker areas on the screen. For instance if someone in the video has dark hair, there are green tints to the hair. It almost looks like a color negative, but not quite. This has just started happening. I've had my mac book pro for about 2 months.

Could you please give us a picture of what is going on. This is a picture of what the top of Safari looks like when I go to the Help menu. I typed in the word cache and a number of options appeared below. Is this not happening for you?

Green Tint using mattes or transitions

While using hdv footage, i've noticed that sometimes during matting and especially when i add a fade out transition; that at the frame the effect takes place, a green tint is added to the clip for the length of the transition. Any suggestions? Thank you.
FCP 5 HD

What is your source video and what are your sequence settings?
How does it appear on your NTSC/PAL production monitor?

LR 2.3 applies a green tint to RAW image AFTER making adjustments

Hi all,
Thanks for having this great forum, it looks like there is some great information here. I clicked around the LR threads and the FAQ but I haven't found anything applying particularly to my issue/question, though, and I'm hoping some of you can help me understand what is going on. .
I have read about LR changing the colorcast on import, however in my case the images look fine after importing and processing. When I click BACK to an image that I have already processed, I am seeing LR 2.3 apply a green tint to it, and I have no idea why.
What I am doing:
-Import Canon RAW files into LR collection (images look fine, no abnormal colorcast)
Develop tab:
-I can click around the collection and view the images without any colors changing
-Process an image to my heart's content (image color still looks fine)
-Click to the next image and process the next one
-Mouse-over on the previously processed image on the bottom filmstrip, and preview shows up on the Navigator pane (preview looks as the image was edited previously)
-if I click to a previously processed image in the filmstrip, it will load into the center pane
-while the processed image loads here, the green tint gets applied to the image
-Color tint/green saturation has not moved from its previous position (even if it was moved during initial processing)
-In order to correct it, I either have to adjust the color tint slider about 20 points away from green, or dial down the green saturation to compensate.
Once I re-correct the image, I can click back to it again, and the mysterious green tint will no longer re-apply itself on this image.
This happens to most if not all of the images in the collection. I have only processed one other RAW collection in LR, but I did not have this issue.
I dont know what exactly is being changed to result in this green tint applying on its own, so I'm not sure if the adjustments I'm making are correcting it.fully.
I hope I'm detailed enough in explaining what I'm seeing, and that it makes some kind of sense.
Does anyone know what is going on here?
Thank you!

Hi John, thanks for the reply.
Thanks, I'll look into the preferences in LR, although everything has remained mostly in its default settings. I've loaded JPG collections without seeing this either.
Would monitor profiles matter in my case? I ask because I am simply clicking back to a previous picture in the strip. When I leave the picture it looks fine, and returning to it shows that image but with the green tint. I haven't gotten to the point of exporting/converting the image, or anything further.
Some more information if it helps:
Using MS Vista
Using Canon Rebel XTi 400D
I copy only the raw files from the memory card to a folder, and then point the LR Import to that folder.
I will try replicating the issue on another computer in hopes to narrow it down. I am baffled.

Monitor went temporarily to black and white with green tint

Last night when I turned on my computer my monitor showed only a black and white picture with an overall green tint. I restarted it, but the same. This morning, however, it is back to normal. The strange thing is that my house lights seemed to be dim, too. (I thought it was just me until I turned on my computer). Is this a sign that my monitor may be failing, or some kind of fluke?

It is, but only with a lot of compositing.
In FCP this would be doable with garbage mattes, but you'd need the 60 point one from Paul Crisp...and that wouldn't be fun.
In After Effects, you'd have to mask everyone else, and again, keyframe.
Shake might do this well, and it is on the cheap now. But it has a HUGE learning curve. And I have no doubt that even with Shake you are looking at a frame-by-frame manipulation.
Good effects aren't easy to pull off.
Shane

Crazy green tint on greys in Illustrator CS5.1

I've just downloaded the trial of CS5 having used Illustrator since before the Creative Suite existed. I'm trying to set up some colours but every time I'm making greys, they are coming out with this gnarly green tint that I don't want. The colour I'm mixing is showing up as regular grey in the colour mixer but in the image I'm working on and the swatch it's showing up with the tint.
Any ideas?

Interesting. The Screen captures you've posted have a green cast to them when viewing them on the forum but when I click on the image to enlarge, they are the gray you have shown in the color panel. I don't know if this will show it but

AVI Clips Imported to CS.5.5 Has Green Tint and Colored Lines

NOTE:
I'm using the video monitor in the CS5.5 program.
Still trying to upgrage to CS5.5 and testing out the trial version. The new challange is the green tint and colored lines on the imported .AVI files.
Any tips would sure be appreciated. Thanks.

This is crazy.
These are AVI files in CS5.5 that have been used for over 10 years in other versions of Premiere.
If I double click on the Monitor when the video is paused, the color corrects to original. Play again and crazy green color and lines.
Now, if I play the clip without double clicking on the monitor window, the clip will play out green and pause green, but if I double click in the monitor window, the video will correct in pause, but still play out green.
Here's one AVI file:
Type: AVI Movie
File Size: 423.1 MB
Image Size: 720 x 480
Frame Rate: 29.97
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;01;57;00
Average Data Rate: 3.6 MB / second
Pixel Aspect Ratio: 0.9091

HP DesignJet 5500 PS - green tint (partial ) issue

Plotter: HP DesignJet 5500 PS 60 in We've noticed a drop in plot quality after upgrading our computers to Win 7/Win 8. The greenish tint stands out on raster ( aerial ) plots. First we blamed it on the paper we were using ( not matching the profile loaded on the plotter) then we found the driver to be causing this. Once Win 7 & 8 were released , HP failed to provide a PS driver. When installing the printer on Win 7 /8 you'll have to use Microsoft drivers for PS printing. This plotter is used 90% for ArcGIS/PDF plots so we needed a PS driver. A few months ago, one of the print heads started leaking and we ended up replacing the entire set of ink lines ( carrying ink from tank to print head). New ink cartridges were installed to make sure no air will be left in the ink lines .... About 1 month after this , we noticed that longer plots ( 36x72 or more) would not print correctly: the first half o the colors look correct then the remaining half a green tint is present. We usually print to PDF and afterwards we send it to the plotter. Apparently there are some issues when plotting a PDF using an HPGL2 driver so we've started sending raster plots straight to the plotter. Well, today I printed another 36x72 (raster & vector) using HPGL2 driver and only the first half of the plot looked the way it should ( last half was green). Has anyone had this problem? It's been suggested ( by our maintenance company) to buy a new plotter because the specs on the 5500 say it is only compatible with OS-s up to Win XP ! Is anyone plotting to an HP 5500 from a Win 7 / 8 PC? What drivers are you using? Are your plots looking good /as expected? Do your raster plots look good? Any help /feedback is greatly appreciated! Thanks in advance! LR

Thank you both for taking the time to answer! Here is the status: I ran a few calibration tests: 1 color calibrations and printhead alignment. While the first color calibration looked OK, after printing a couple of demo pics from the plotter, I noticed issues with one of the colors ( missing lines). The following color calibration tests made it obvious the Light Magenta was failing. Replaced the printhead and printed again. When printing demo picture from the plotter colors looked ok. I am still testing with different drivers but at this point it looks like it is a driver issue: raster plots made using HPGL2 drivers are crisp while raster plots made using PS driver are greenish and faded- at least green tint appears to be constant now... This is just me testing , without vendor assistance.... I am plotting from ArcGIS ( not AutoCAD or Photoshop) but I seem to be the only one with such issues- hard to believe though.... I will post back again once I do more testing. Thanks again! LR

Green tint when matting

Similar Messages

Maybe you are looking for