Griffin iMic, no stereo

Just set up a Mac Mini. One of the intended uses is to copy old vinyls and personal tapes. For input, I use a Griffin iMic through an amp NAD 3225PE. No trouble except no way of getting full stereo, only one channel works. The same with my G4 iBook. A friend came by last night with a G4 Powerbook using Panther. Tried it with that and it worked OK. Could it be a bug in the latest Tiger upgrade? Never had this particular trouble with our old iMac G3 233, OS 8.6 although there were other problems such as buffer overrun which was one reason why I upgraded - big deal.

Replying to old post, but are you using a stereo cable? Some mini jack type cables are mono (only one metalic wrap on the connector).
12 iBook G4 1Ghz   Mac OS X (10.4.4)   Other machine: Mandriva Linux i586

Similar Messages

  • Keyboard line out and griffin imic incompatibility?

    I'm getting horrible background noise when I try to record my keyboard (Yamaha PSR-225GM ) headphone line out through my Griffin iMic into Garageband. I assume it's a level issue but even the keyboard volume control won't fix the problem nor will system settings for the input device. My Sony stereo mic into the same iMic input sounds fine. Headphones attached to the keyboard line out sound fine too so I don't believe it's a quality problem with the line out. Can one not use a headphone output into the Griffin iMic?
    If not, anyone got suggestions for higher quality audio input into the iMic flat panel (e.g. some USB box) that's compatible with various audio equipment (mics, keyboards, guitar amps, 1/4" and 1/8" and RCA plugs etc.)? The iMic has served me fine, but maybe it's time to start looking for something higher quality, and more versatile. Thanks.
    By the way, anyone know why sometimes there's a delay (half second or so) between audio in and the monitors in Garageband, and sometimes not? It makes performance nearly impossible when there's such a big delay.
    SJG
    iMac flatpanel 15   Mac OS X (10.3.9)  
    iMac flatpanel 15   Mac OS X (10.3.9)  
    iMac flatpanel 15   Mac OS X (10.3.9)  
    iMac flatpanel 15   Mac OS X (10.3.9)  
    iMac flatpanel 15   Mac OS X (10.3.9)  

    tell me if I'm on the right track on the
    following theories (I don't know if the following are TRUE):
    I'll do the best I can...
    1) The quater-inch headphone output from the Yamaha
    keyboard is neither "balanced"
    Correct, the headphone-out is not balanced. A balanced output uses 3 wires, a graound, a hot, and another hot that's 180° out of phase with the first. This is a neat trick in that two signals 180° out of phase with each other cancel each other out sp you get zero signal. In the case of a balanced out if noise is introduced, it is in phase on both cables. On the other end when the signal on the out of phase wire has its phase flipped, your original signal is now in phase on both legs, and the noise is 180° out of phase with itself, and thus is canceled out.
    nor impedance matched
    to the Griffin iMic.
    The impedance is not a problem here. As I understand it, the headphone-out is High Impedance, and so is the iMic's In.
    (I'm using a 1/4" to 2.5 mm
    converter cable). I am possibly getting radio
    interference (I DID get a local radio station when I
    touched the plug right!!) and degrading the signal
    because of these two issues.
    Possible. A Low quality cable and or adaptor could offer an entry point for noise.
    2) It may be necessary to put the signal from my
    keyboard's headphone jack into a DI (direct box) to
    get impedance matched to mixer levels - the levels I
    assume the Griffin iMic expects.
    No, this shouldn't be true. A headphone-out is actually much hotter than a Line-In, so the level should be able to offer more than enough signal, and the impedance is matched.
    3) I'm HOPING that a high quality audio-to-USB (or
    firewire) input box can perform the job of the direct
    box.
    It could, but the weak point I see is that you're stuck using a headphone-out instead of a Line-Out. I don't think a DI box is going to help any in comparison.
    Hmmm, I just glanced at your computer list. Doesn't the iMac have a Line-In jack? Have you tried skipping the iMic and going straight into the iMac?
    Finally, if anyone can give me the list of equipment
    in order from a keyboard to Garageband
    I think it could be Keyboard -> Mac
    Other combinations would just be sticking an interface between the two (Keyboard->interface->Mac)

  • Griffin iMic USB vs. ADS Tech Instant Music for Vinyl Recording

    This is a repost, I posted in OSX accidentally. Sorry! Anyway, can anyone advise me, I am new at this... I just bought an Audio-Technica AT-PL120 Direct Drive Turntable (on its way to me) so I can transfer old LP's to my Macbook Pro for iPod and CD listening. It has a selectable internal stereo phono preamplifier and the ability to choose from phono or line-level output. Now, to get the sound INTO my Macbook pro, should I go with the Griffin iMic USB or the ADS Tech Instant Music for Vinyl Recording? Also, anyone heard of THIS device and do I even need it?
    Griffin Turntable Connection Cable with Grounding:
    http://ec2.images-amazon.com/images/P/B0007PL4BC.01-ADG953YR6NRBF.SS500_SCLZZZZZZZ_V60716819.jpg
    Thanks for ANY advice!
    Jody
      Mac OS X (10.2.x)  
    Macbook Pro 17"   Mac OS X (10.4.8)  

    I think you probably have everything you need except for appropriate audio recording software. For example, your MacBook Pro probably has an audio input jack that can be set to line level. If that is the case, then all you need is a cable from the turntable (set at line level) to the MacBook's audio in (plus the recording software).
    However, a quick websearch on the ADS thingy found a review which should help you.
    http://www.macnn.com/reviews/review.php?id=164
    Based on that, the ADS thing may be worth it just in terms of making it easier for you, even if you don't, strictly speaking, need it. It appears to include recording software called CD Spin Doctor. I'm not too fond if CD Spin Doctor, but it will get get the job done. I like Amadeus for audio recording.
    The review may also provide you with sufficient explanation on how to do the whole process.

  • Recording line-level input with Griffin iMic

    I'm having trouble recording line-level input from a stereo system with a Griffin iMic. Even though all extraneous inputs have been deactivated, I'm still getting a slight feedback hum. There should be no extraneous noise whatsoever. I haven't done this in quite a while, so I've forgotten what I must do. Any help is apprreciated. Thanks very much. Peace,
    iBook G3, 1.42 Mac mini G4 DVD±RW   Mac OS X (10.3.9)   640Mb SDRAM, 1gb DDRAM

    I'm trying to digitize an audio cassette with
    Soundtrack Pro. My setup includes a Griffin iMic
    that goes to a USB port. The trouble I'm having is
    in controlling the input volume. The level meters
    indicate clipping, but I'm not clear how to set the
    input level.
    If it's in the Recording tab (>Input) with the Gain
    slider, mine is greyed out.
    M Wohlgy,
    (I know this is months after your post.)
    Control of the iMic volume is in the Preferences pane called "Sound". You can set the output and the input levels there.
    Remember the iMic's position switch works only for the imput, either close to the microphone icon for "microphone" or away from it for "line in".
    I use the iMic exclusively.
    David

  • Griffin iMic output problems with iTunes

    I bought an Griffin iMic so that I could listen to my iTunes library through my home stereo. However, I am having problems with the output. I have tried several different ways of connecting the iMic to my stereo, but I am not getting any sound output. It SHOULD work but it is not. Are there any known problems with iTunes and iMic and Max OS X 10.2.8?

    I got this message from Griffin Technology
    Technical Support, and it seemed to help with my sound quality output, even though it talks more about sound input.
    Hello,
    Sorry for the delay in my response.
    First, let's make sure you're getting an input signal.
    The easiest way to make sure that you're receiving an input signal
    from the iMic is to go to your System Preferences/Sound Preferences.
    Click on the INPUT tab and select iMic from the list of devices.
    Below the list of devices is a Input Volume slider and a virtual
    input meter. If you're seeing those lights move, there is a signal
    coming into the device. The Input Volume slider is there to boost
    up or help drop the amount of signal needed. A good signal should
    stay somewhere around the middle of those meter lights.
    Then click on output and be sure you have "built-in audio" selected.
    Then you will have to either open Final Vinyl and select "preview"
    to hear the audio come through your speakers.
    Also check your Audio/MIDI Setup. Open your Applications folder
    from the Finder, and scroll through the applications, down to
    "Utilities." Select that, and then choose "Audio/Midi." From here,
    set the "Properties For" or "Settings For" to iMic USB Audio System.
    Then set both the input and the output to 16bit 2 channel 44100Hz.
    Hope this helps,
    Rachel
    Griffin Technology
    Technical Support

  • Setting Input Level with Griffin iMic

    I'm trying to digitize an audio cassette with Soundtrack Pro. My setup includes a Griffin iMic that goes to a USB port. The trouble I'm having is in controlling the input volume. The level meters indicate clipping, but I'm not clear how to set the input level.
    If it's in the Recording tab (>Input) with the Gain slider, mine is greyed out.

    I'm trying to digitize an audio cassette with
    Soundtrack Pro. My setup includes a Griffin iMic
    that goes to a USB port. The trouble I'm having is
    in controlling the input volume. The level meters
    indicate clipping, but I'm not clear how to set the
    input level.
    If it's in the Recording tab (>Input) with the Gain
    slider, mine is greyed out.
    M Wohlgy,
    (I know this is months after your post.)
    Control of the iMic volume is in the Preferences pane called "Sound". You can set the output and the input levels there.
    Remember the iMic's position switch works only for the imput, either close to the microphone icon for "microphone" or away from it for "line in".
    I use the iMic exclusively.
    David

  • System Profiler see Griffin iMic, but Sound Prefs Does not

    I have 3 Griffin iMics - 2 new white ones and 1 old silver one. All 3 iMics are recognised by my late-2009 iMac 27" i7 running Snow Leopard (10.6.5). However, NONE of these 3 iMics are working on my mid-2009 MacBook Pro 15" 2.8GHz also running Snow Leopard (10.6.5)!
    If I plug any of these iMics into the MacBook Pro, the System Profiler lists them in the USB section, but the Sound preferences does not list them under either the Input or Output tab. When I contacted Griffin about this they suggested it was a fault with my MacBook Pro. However, if I plug-in either of 2 different model Logitech USB headsets (with boom mics), they both appear in the Input/Output tabs of the Sound preferences. So it doesn't seem correct to blame the MacBook Pro for this. But obviously something is wrong!!
    Anyone got any ideas about what's wrong with the iMics and my MacBook Pro and how to fix it?

    Hi mooblie, thanks for checking yes.
    No, Disk Utility does NOT see the disks. And yes, I've checked the preferences in Finder, and I have ticked it so that it shows external drives.
    Further, the Toshiba has "come back to life" (is now recognized), and so just the Maxtor is a problem (which was a problem which as memory serves immediately predated the blue screen/gray screen drama.)
    The Maxtor is not seen on the desktop/finder on my wife's (brand new) Macbook Pro, but is seen in her system profiler as well, BTW.
    So I would think it's just a problem with the drive (which sadly houses my iTunes collection), except for the brief lack of recognition of the TOshiba; and the fact that it seems my printer (also running in via USB) is only sporadically being recognized (had a few "printer is offline" when it was plugged in via USB and also to the wall (electric.))
    FWIW, the TOshiba has no external power, just USB, so has to go directly to the back of the Mini, it was never recognized when I tried to hook it in via a USB hub I have ... the Maxtor (problem drive) has external (AC) power, and that is all hooked up.
    WHile trying to fix the blue screen, I followed various fixes including unplugging everything and holding down the Power button, starting up while holding "shift", holding "c", etc., etc. ...
    Any further insight greatly appreciated!!!
    Marc

  • GarageBand w/ Griffin Imic+guitar cable

    Ok Hi all, first post but I've been skimming the forums for a few weeks. I just bought a 15" powerbook with the works. I'm trying to mess around with garageband so I picked up the griffin guitar cable and imic (re: college kid on a budget) and have everything setup and installed correctly.
    I'm able to record myself playing, but the volume input isn't very high. If I'm picking/strumming, its tolerable, but not adequate. If I play fingerstyle, you can BARELY hear it. I'm not sure where my problem lay.
    I have everything turned up to max, as far as I can tell. Is there any software that I can use to adjust my input volume further? All the software that appears to have come with Imic is junky and not what I need, unless I'm overlooking something.
    Thanks in advance,
    J

    Pardon me for stepping in but I have another problem with a similar setup, I sure would appreciate your thoughts on this. I have a 1GB Mac Mini hooked up to a Griffin iMic and the Griffin Guitar cable in order to connect to my electric guitar. I am able to record into Garageband, however, there is at least a half second delay between the time I pick a cord and it comes out of my speakers (monitor enabled). So, basically, it is impossible to play with this lag... I have the latest version of Garageband and all the updates to Tiger, what to do? Is it the iMic? Is it the Mac Mini? Is it a "magical" setting in Garageband? Is this even possible or am I facing a lost cause, really do I have to buy an iMac before the monitor lag goes away??? Sure would appreciate some advice, I'm sure I'm not the first one to experience this.

  • Griffin imic interference

    I've been trying to get a more "live" sound into garageband.
    I've been using a griffin imic as my way to capture sound.
    Weather it's drums running thru a mixer or simply using a
    pod line-6, there is a very audible interference heard
    once the signal hits the imic. Does anybody have any ideas
    on how to correct this? Would it be easier to go strait in thru
    the computer mic input (i'm not even sure there is one).
    Thanks!

    you have to keep in mind that the iMic is a $35 interface ... it's functional, but you get what you pay for.
    the mac does not have a "mic jack", but many do have a Line-in, so you could try plugging the mixing console directly into the line-in if your mac has one:
    http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein

  • Griffin iMic and Edirol PCR-A30 conflict

    Garageband band gives me the following error and I must then force quit:
    Garageband detected a possible conflict between one or more third party midi or audio drivers
    Be sure to install the latest for all audio or midi equipment connected to your computer, and remove any old or unused driver.
    I updated from the Edirol site to the newest software they had available.
    I am only using one device at a time.
    I trashed the Garageband prefs and then set the Sound Prefs to the iMic in Audio Output.
    Any help to a newbie using Garageband 3 would be helpful.
    Thanks.

    Even more interesting. I updated the Edirol driver v. 1.2.0 .I took the Griffin iMic out of the loop. I trashed my prefs and any created Garageband songs, selected the Edirol as the input in the Sounds Preferences in System Preferences, output as my headphones. Restarted the computer and opened Garageband 3.
    It took a long time to initialize but worked.
    Closed the program. Opened it and received the error message above yet again.
    Any help would be greatly appreciated.

  • Griffin iMic fixed audio with callmanager 5.0

    Has anyone had any luck getting the Griffin iMic USB fixed audio adapter working with CallManager 5.0 linux? Do I need to load any special drivers on the server?

    I went through the Griffin iMic issue a month ago for an existing CCM 4.1 deployment.
    After seeing on Griffin's website that their iMic is/was only certified for Windows XP and Mac OSX, I contacted their tech support. Below is their response to the Cisco MoH URL.
    "That page is a Cisco document, not a Griffin document. We have never claimed compatibility with that system on our website or in any of our documentation. We have contacted Cisco a number of times asking them to remove the document because it has not been authorized by our company. If Cisco says they support it, then perhaps try contacting them, but we do not support the use of iMic in any other systems than Mac OSX and Windows XP SP 2."
    I contacted the TAC and was given the same information that was found in the MoH documentation. No clarification.
    I then contacted Cisco's PDI help desk and received the below responses.
    Initial response: "The iMic cards that were supported are no longer in production. If you were able to get an older iMic card that supported Windows 2000, it will work with on the CallManager 3.3 servers, and will be supported by Cisco TAC. But the newer iMic2 cards are not supported."
    Final response: "Since those cards are no longer available, we do not have a supported sound card for CallManager 4.x. I'm not sure if this is a valid option for you or not, but in a few weeks Cisco will have it's own sound card for CallManager 5.0, you could upgrade your CallManager."
    Hope this helps,
    Jason

  • Griffin iMic

    I have an Griffin imic plugged into my mac-mini (OS 10.4). It works fine with speakers but I can’t get a microphone to work with it. The microphone works fine on any PC I have but not on the Mac through imic. I do see the imic fine on Sound control panel, but sound just won’t record.
    Any ideas on how to fix it?

    Do you have the slide switch on the correct setting? It's counter-intuitive to what you think it should be on the original (silver) iMic; the position for the microphone is away from the microphone input.
    Hope this helps.

  • How do i use the griffin Imic with a headset?

    I recently got the iMic for my macbook pro running lion. when i plugged it in the microphone was muffled and headphones didnt pick up sound. what is wrong?
    I have already set it up in the system preferences to use the usb iMic
    I am using the yapster tm-yb100a http://www.amazon.com/Universal-Stereo-Gaming-Headset-TM-YB100A/dp/B001FY7LBQ

    Hi.
    I've used the iMic myself, and I don't believe it is capable of doing what you are attmepting.
    The iMic is designed to provide a USB input for an external microphone, and  USB output for external speakers for your Mac. It has a mic input port, and a speakers out port.
    Neither port is specified for use with a gaming headset (mic with headset on a single plug).
    You will need to look elsewhere for a USB gaming headset.
    I hope this is helpful.

  • 2010 i5 MBP USB Ports Not The Same?  Griffin iMic Issue

    I have a 2010 15" i5 MBP. I got one of the white iMics and it works fine on the port thats closest to the screen. However, when I plug it in to the port that's closer to the SD slot, it doesn't work. Under the audio settings screen, I see the iMic under Input, and the slider is to the right, but the VU meter doesn't register anything. However, when it's in the USB port by the power adapter, it works as it should.
    I have read that certain model MBPs have USB ports that are not the same, and some people have problems with programs like Serato when it's plugged into the front port. Traktor and Serato have even mentioned that on the MBP there is one "good" port and one "bad" port.
    Curious if anyone else noticed this. Again, it seems to only affect 2010 i5 MBPs.

    Hi WebBrowser2,
    As I understand your query its not a single doubt you are having at all, actually it’s a bunch of multiple doubt you are carrying here in your mind allied to Mac Book Pro (USB Ports are not working).  There might be various reasons behind- not working of USB ports in Mac Book Pro, as you already had searched out various ways to fix all your issues. A few months ago, I faced the same issue as my USB port was suddenly stopped to respond, then I also tried to find various ways to get rid of this issue, and I found an informative blog link which has fixed this issue and make me tension free.
    For more information visit at- http://www.olmtopsts.com/blogs/when-macbook-pro-usb-ports-not-working.html
    And I am hoping- it will assist you in the same way as it assists me.

  • Using Griffin iMic with mini

    I just installed an iMic on my mini, and right now I'm only using it for audio input, and leaving the output set to the mini's built-in headphones jack. Does anyone know if there is a difference in performance and/or quality when switching audio output to the iMic and letting it handle both? Should I just leave the output assigned to my mini's jack?

    Short answer: I seriously doubt it would matter.
    Longer answer...
    The speakers and power amp (Either extenal or built into the speakers) have the greatest effect on output sound quality. Most powered PC style speakers are not good enough to show off any difference is things like the quality of the DAC in the iMic vs Mini. If the speakers cost less than $1000 they are the weak link in the system. Also the iMic is not intended to be, nor is it marketed as a profesional quality device for either recording or playback.
    For critical listening an industry standard is the AKG K240 headphone. These might show up a difference in two DACs but you'd still need a good and well trained ear.

Maybe you are looking for