Error in using the command "loadjava"(help me !)

When I use "loadjava" command to load the sample source code of
XML SQL Utility for Java,the errors as below:
C:>loadjava -u system/manager -v -r -t samp1.java
internal error:unanticipated
exeption:java.lang.NoClassDefFoundError:
oracle/aurora/sqljdecl/SqljDecl
java.lang.NoClassDefFoundError:
oracle/aurora/sqljdecl/SqljDecl
at oracle.aurora.server.tools.SourceFileReader.getScanner
(SourceFileReader.java:52)
at oracle.aurora.server.tools.SourceFileReader.getFirstName
(SourceFileReader.java:61)
at oracle.aurora.server.tools.LoadJava.processLoadAndCreate
(LoadJava.java:1094)
at oracle.aurora.server.tools.LoadJava.process
(LoadJava.java:1021)
at oracle.aurora.server.tools.LoadJavaMain.run
(LoadJavaMain.java:193)
at oracle.aurora.server.tools.LoadJavaMain.main
(LoadJavaMain.java:49)resolvers:
loadjava :1 errors
C:>
I looked for the class "oracle/aurora/sqljdecl/SqljDecl"
by executing the SQL query as below:
"select object_name from user_objects
where object_name like oracle%"
But I found only "oracle/aurora/sqljdecl/Token".
Maybe my envirenment have some errors(I get Oracle8i from
oracle's home by downloading)
I can't find out the reason.This matter have troubled me for a
long time.
Does anyone know the reason?please tell me.thanks a lot.
null

plz help me !!!!!

Similar Messages

In Terminal,When I use the command "Say",it gives me the error:MTBEAudioUnitSoundOutput::PropagateProperty Error -10851,Should I be worried?

Hi guys,
When ever I use the command "Say" in terminal,it says the words I want it to say,but then gives me this error:
MTBEAudioUnitSoundOutput::PropagateProperty Error -10851,
Should I be worried about this?
Here are my Specs:
iMac
21.5-inch, Mid 2011
Processor 2.7 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6770M 512 MB
Software OS X 10.8.4 (12E55)
Thanks again,
Bye.

Hello,
Are you running any AV software?
Are you using stock voices, or custom ones?

Error comes up when I use the command:Setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms

Hello,
When I am using the command c:\Exchange2013\>Setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms on my domain controller I am receiving the error below:
Welcome to Microsoft Exchange Server 2013 Service Pack 1 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for
installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis COMPLETED
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareA
D'. No Exchange 2007 server roles have been detected in this topology. After thi
s operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms
.exch.setupreadiness.NoE12ServerWarning.aspx
Configuring Microsoft Exchange Server
Organization Preparation FAILED
The following error was generated when "$error.Clear();
initialize-ExchangeConfigurationPermissions -DomainController $RoleDomai
nController
" was run: "Active Directory operation failed on domain.com
. This error is not retriable. Additional information: Access is denied.
Active directory response: 00000005: SecErr: DSID-031521D0, problem 4003 (INSUFF
_ACCESS_RIGHTS), data 0
I am using an admin account with full rights. Could you give me any advice what might that be?
Thank you in advance

Regarding this article: http://ayalaaii.wordpress.com/2012/12/20/exchange-2010-insuff_access_rights-this-error-is-not-retriable-additional-information-access-is-denied/
I have managed to get into the permissions in Advanced Security settings, but for some reason I am not able to find “Include
Inheritable permissions from this objects parent”
Any ideas where can it be?
Thank you

Error "Extend the destination address using the location input help"

Hi experts,
I got warning while creating travel expense from existing travel request.
the warning appear like this "Extend the destination address using the location input help"
I don't want user to enter detail of address trip destination.
how to avoid this?
thanks
Edited by: nzworld on Apr 29, 2011 5:42 AM

Hi,
If you are using ESS and you get the warning message when you enter details for a particular expense type. Please follow the config and hide the location details. Then you will not get this error message.
SAP Customizing Implementation Guide > Financial Accounting (New) > Travel Management > Travel Expenses > Dialog and Travel Expenses Control > Dialog Control > Field Control for Additional Receipt Information.
Enter your trip provision variant, select the expense type for which you dont want to enter the location details and then select details. Search for the variable location, select hide radio button and save.
Please let me know if you have further clarifications.
Regards,
Raj

I keep getting the start menu and various programmes opening when I use a series of keys when working in my accounting programme, I am not using the command key and is very frustrating me, can anyone help me?

I keep getting the start menu and various programmes opening when I use a series of keys when working in my accounting programme, I am not using the command key and is very frustrating, can anyone help me? I am working on a Mac OS X Version 10.6.8, just need to know if I can reprogram the keys to stop this happening?

Safari browser and menu shortcuts:
http://docs.info.apple.com/article.html?artnum=42951
Mac OS X keyboard shortcuts:
http://support.apple.com/kb/HT1343
http://docs.info.apple.com/article.html?artnum=75459
Changing behavious of Function Keys:
http://support.apple.com/kb/HT3399?viewlocale=en_US
and more useful information on keyboard shortcuts here:
http://www.myfirstmac.com/index.php/mac/articles/mastering-keyboard-shortcuts
How to re-map individual keys:
http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&item_id=ukelele

"An error occurred sending the command to the application" When trying to open excel document from outlook 2007

Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
OS: Windows Server 2008 R2
If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can Create a trusted location follow these steps
Click the Microsoft Office Button , and then click Excel Options.
Click Trust Center, click Trust Center Settings, and then click
Trusted Locations.
If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
box.
Click Add new location.
IMPORTANT We recommended that you don't make your entire
Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
locate the folder.
If you want to include subfolders as trusted locations, select the
Subfolders of this location are also trusted check box.
In the Description box, type what you want to describe the purpose of the trusted location.
Click OK.
More detailed information you can refer to this link:
http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Use the command "Properties" in Windows Explorer to unlock the file

I'm getting this error where, when I start Photoshop, I get a popup saying "Cannot load Photoshop because the file is locked or you don't have the needed privileges.. Use the command "Properties" in Windows Explorer to unlock the file". I unlocked it's access to everyone for the 64-bit and the 32-bit version, still doesn't work. The only way to make it work is by going in Program Files>Adobe>Adobe Photoshop CS5 (64-bit) and manually starting it as an administrator.
Everything was working just fine until today. Please help!

If this worked before, and you have made no hardware or software changes you might want to reset the preferences.
Start photoshop and IMMEDIATELY hold down the Alt + Ctrl + shift keys. It is a little tricky but keep trying until you get a reset window.

Using the command line client...

I've got a few thousand videos, with metadata, that I have to add to an existing FCS install. Right now, I'm just trying to figure out the proper way to use the command line.
If I run the following command as root (paasset_predict_motorvideo is the name of my metadata set, as listed in the admin app...)
bash-3.2# ./fcsvr_client createasset paasset_predict_motorvideo /Users/bfinley/Desktop/test.mov
I get the following error:
{ CODE = E_NOTSUPP, DESC = Entity /Users/bfinley/Desktop/test.mov doesn't know how to do anything, SRC_FILE = PmdEntity.C, SRC_LINE = 1509, ERROR_TYPE = ET_PERM, ADDRESS = /Users/bfinley/Desktop/test.mov }
If I pass in the --host, --user, and -pass on the same command, i get:
{ CODE = EMISSINGPARAM, DESC = CURRENTPERMID missing in PmsTask_QueryPerms, looks like unknown node failed to pass it down to child unknown node, NODE = ["PmsTask_QueryPerms" 0x2a51c50, ref=3, wref=2] taskState=0 dbqueue=0x184fb64 needTrans, SRC_FILE = PmsTask_QueryPerms.C, SRC_LINE = 136 }
I don't need to add any metadata to it, and i get the same error whether I enter any metadata at the end of the query or not.
I just have a pile of videos, the filenames of which are keys to a table that contains the rest of the metadata, and I want to automate the addition of them to the new FC Server install.
Am I going about this the wrong way?
Thanks in advance.

Brian:
I've start by placing assets into a device that is configured with Final Cut Server (FCSvr).
Example, let say you have a folder on your desktop name 1000videos.
Create a device in FCSvr and map it to /Users/bfinley/1000videos.
Name this Device with the name of your choice i.e. Library2
Don't apply any scan schedules to this device etc.
After you're done with that determine the device id of the new created device by running this command
./fcsvr_client search /dev
you get some output like
Address DEVICE_NAME DEVICE_TYPE
/dev/7 Archive_Device filesystem
/dev/13 Library filesystem
/dev/10 Media filesystem
Note down the device id of your newly created device i.e. /dev/13
Next assuming that you have a file with a filename of test.mov
use the following command
sudo fcsvr_client createasset paasset_predict_motorvideo /dev13/test.mov
you should receive a response to this output containing the newly create asset id.
Hope this helps.
Nicholas Stokes
XPlatform Consulting
[email protected]

Error while using the export utility

Dear all of
I am getting the following error while using the export utility in the Oracle database 9i
I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
FOLLOWING ARE THE ERROR ----------------------------
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
-----------------------------------------------------------------------------------------------------------------------------------

Can you go to this discussion please.
Re: Getting a strange error for Exp
-aijaz

Can't change activation only mode to off using the command line in Windows 7 64 bit

I used the command line to turn activation only mode on and now when I use teh command to turn it off it will not change the iTunes setup. I am on Windows 7 64 bit. I tried uninstalling itunes and reinstalling and it is stillin activation only mode.

Hi! Thx for your quick reply! I am still unsure what to do tho---see my questions below in bold:
Windows 7 comes with its own version of the standard PostScript driver. = Where is this driver? I have no idea how to find it, it doesn't show up in my Printer menu in FM?
Given that PostScript generated by a driver can be highly device-specific, you need to install the driver as modified by the PPD file for the device in question. Most printer manufacturers in fact provide a PostScript driver installer that associates their printer's PPD file with the standard Windows Printer driver and subsequently creates what is called a PostScript printer driver instance for the particular device on the I/O port you designate. = ??? I've only updated a PPD file for watermarks and have no idea what this means...is there a step-by-step instruction for this? I just need to download a PS driver to select that works & doesn't freeze up my FM when creating a .ps file.
The real question thus is exactly what are you trying to generate PostScript for? = I create a PS, & then use Distiller to create a PDF. This enables me to have a PDF that automatically has Bookmarks, the TOC/LOF/LOT & all corss-refs are hyperlinked, etc.
If you are trying to create PostScript for distillation into PDF, Acrobat installs a PostScript driver instance of its own, labelled Adobe PDF, that is associated with the Acrobat Distiller PPD. = I have tried the Adobe PDF selection from my Printer menu in FM, but it freezes up FM and I have to close the whole program & no PDF generates.
BTW, although you may be successful in installing and running FrameMaker 8 on Windows 7, in fact Adobe officially does not support FrameMaker 8 on Windows 7. = I don't know what to say---the upgrade is too expensive for some of us folks out here right now, so we all need to work with what we have for now!
I appreciate your help, thank you.

How do I use the commands to start and restart the jmqbroker normally?

How do I use the commands to start and restart the jmqbroker normally?
Because I have tried to use "jmqcmd shutdown bkr" and then tried to type
"jmqbroker" to start up. My screen hangs up and seems that the process
hangs up. The message is
[28/Jun/2002:18:29:07 GMT+08:00] [B1060]: Loading persistent data...
[28/Jun/2002:18:29:08 GMT+08:00] [B1039]: Broker "jmqbroker" ready.
The prompt is hanged until I press CTRL-C.
Then I got the following message:
[28/Jun/2002:18:32:07 GMT+08:00] [B1047]: Shutting down broker...
[28/Jun/2002:18:32:07 GMT+08:00] [B1077]: Broadcast good-bye to all
connections ....
[28/Jun/2002:18:32:07 GMT+08:00] [B1078] Flushing good-bye messages
[28/Jun/2002:18:32:07 GMT+08:00] [B1056] Cleaning up persistent
store...
[28/Jun/2002:18:32:07 GMT+08:00] proceessing 0 messages and cleaning
up 0 files...
[28/Jun/2002:18:32:07 GMT+08:00] [B1063] Done
[28/Jun/2002:18:32:07 GMT+08:00] [B1048]: Shutdown of broker complete.
Then, I use jmqadmin to invoke the console, I can start the broker
again, it gives me
Error encountered while connecting to the broker: "MyBroker":
Broker Host: 'localhost'
Primary Port: '7676'
[C4003]: Error occurred on connection creation, - caught
javax.jms.JMSException
Please verify that there is a broker running on the specified host and
port.
I used ps -def | grep jmq there is no process anymore.
Is it a bug? Would somebody have any idea on what went wrong?

'jmqbroker' is the command to start a broker.
When you type 'jmqbroker' in a command window,
unless you put it in the background, the shell
prompt won't return until the broker is shutdown.
So when you see 'Broker "jmqbroker" ready.', it tells
you that the broker is running and is ready.
When you CTRL-C the process, it has the same effect
as using jmqcmd to shutdown the broker. And so after that,
there's no jmq processes running since you have just
shutdown the broker.
Remember that the jmqcmd/jmqadmin 'restart' command is to
restart an already running broker. jmcmd/jmqadmin does
not support starting a new broker instance.
If you are using csh, end the jmqcmd command with an ampersand ("&")
to have the broker running in the background. An alternative is to
stop the process with Ctrl-Z then input the command "bg" to have that
process resumed in the background.
The problem with not being able to start a broker using the
administration console is a documented limitation of the product that
Yvonne also mentioned. Check the Administrator's Guide for that.

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

How to pass in variables using the command line when starting ActionScript native app

How do I pass in variables or startup arguments using the command line when starting an ActionScript native app? For example, I have my app call MySweetWidget and it has been compiled with Adobe AIR captive runtime so now I have MySweetWidget.exe.
In the command line, I am calling MySweetWidget.exe and would like to pass in variables or properties to the application. I would assume that those variables are then read from the loaderInfo.parameters object.
Please let me know if the Adobe AIR runtime supports passing in parameters to the native runtime. If so, I would like help determining the correct format of how to pass in the variables. Then would you read those from the loaderinfo.parameters object?
Thanks,
Jeff

I found the answer to my own question:
Yes it is a supported feature. It is documented on the following page:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/desktop/NativeApp lication.html#event:invoke
When you subscribe to the invoke event of the NativeApplication it will subsequently dispatch the event and you read the e.arguments Array object to get the startup arguments passed into the native application.

Create WiFi Hotspot using the command promt

I was trying to create WiFi Hotspot on my Windows 7-32bit running laptop using the command promt method after followinng the instructions from here >> http://www.techswatch.com/2014/11/create-wifi-hotspot-windows-87-command-prompt.html However, the problem is, after creating the hostpot, when I enter the password it does get connected but I cannot access the internet. I am sure that I have entered the correct password else it wouldn't have got connected. Any idea what could have gone wrong? Any help would be apprecited.

Hi ihtisham301,
Thank you for visiting Sony Community!
Try to connect any different device to your home network. If other device can't connect then you may contact your Internet Service Provided (ISP) for further assistance.
If other device can connect, then try to isolate the issue. You mentioned you cannot connect to the network but you were able to enter the credentials before connecting to the network. Try to ping any website, Start -> search cmd -> once in command prompt, enter ping googe.com and hit Enter. Check the Ping statistics. Try to ping your router as well. ping [router IP address] then hit Enter. Also boot the laptop in Safe Mode with Networking -> turn off the laptop, press the power button and immediately, tap the F8 key repeatedly. Once in Advanced Boot Options, select Safe Mode with Networking.
I'm not quite sure about the process that you did. I never tried that before. And another thing is, it seems that you are using a non-U.S. model of Vaio. We usually have Windows 7-64bit computer. We have limited information with non-U.S. model of laptops.
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Hope my suggestions help.
Thanks,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

Installing a New Windows Server 2008 R2 Child Domain by Using the Command Line

Installing a New Windows Server 2008 R2 Child Domain by Using the Command Line:
http://technet.microsoft.com/en-us/library/cc731873%28v=ws.10%29.aspx
dcpromo /unattend /InstallDns:yes /ParentDomainDNSName:mysite.com /replicaOrNewDomain:domain /newDomain:child /newDomainDnsName:gridview.mysite.com /childName:gridview /DomainNetbiosName:gridview
/databasePath:"c:\Windows\ntds" /logPath:"c:\Windows\ntds" /sysvolpath:"c:\Windows\SYSVOL" /safeModeAdminPassword:pass1 /forestLevel:4 /domainLevel:4 /rebootOnCompletion:yes
Error Code:
The specific argument 'childName' is not recognized.
I am trying to insert gridview as a childname.

Hi,
Before going further, can we try another domain name to see what will happen?
Besides, if the issue persists, we can try installing a new child domain by using the GUI.
Installing a New Child Domain by Using the Graphical User Interface (GUI)
http://technet.microsoft.com/en-us/library/cc771856(v=ws.10).aspx
Best regards,
Frank Shen

Error in using the command "loadjava"(help me !)

Similar Messages

Maybe you are looking for