Group Already Created (Assign Another Name)

Hi SD Guru's
I am getting this message "Group Already Created (Assign Another Name) " as soon as i enter my order type , sales org , dist chann , and division in VA01 and press Enter .
Message No. is JVSD002
What could be the possible reason for the same?
How can it be resolved.
Regards
Ravi

Similar Messages

How to group data and assign cell names using Excel templates

Hi all,
reading the article "Real Excel Templates 1.5" on the Tim Dexter's Blog, I found that I need hierarchical data for Excel templates. So only in this way I can group my data.
My hierarchy is composed by 3 levels:
lev 1 DESTINATION: is the higher level that groups SERVICES and COUNTRY
lev 2 SERVICES: is the level that groups the countries
lev 3 COUNTRY: is the lowest level with the COUNTRY, CALLS and CALLS_MINUTES details
An example of my hierarchy is this:
lev 1 INTERNATIONAL
lev 2 INTERNATIONAL FIXED
lev 3 Albania 90 438,15
lev 3 Armenia 1 16,95
lev 2 INTERNATIONAL MOBILE
lev 3 Albania Mobile 161 603,35
lev 3 Australia Mobile 6 34,38
lev 1 NATIONAL
lev 2 HELLAS LOCAL
lev 3 Hellas Local 186,369 707940,6
lev 2 HELLAS MOBILE
lev 3 Hellas Mobile Cosmote 31,33 43856,97
lev 3 Hellas Mobile Q-Telecom 2,398 4343,78
lev 2 HELLAS NATIONAL
lev 3 Hellas Long Distance 649 1499,55
lev 1 INTERNET
lev 2 INTERNET CALLS
lev 3 Cosmoline @Free 79 2871,3
So, my data template is the following (with exactly the hierarchy I want for my data):
<dataTemplate name="emp" description="destinations" dataSourceRef="GINO_DB">
     <dataQuery>
          <sqlStatement name="Q1">
               <![CDATA[SELECT 1 TOTAL_CALLS, 2 TOTAL_CALLS_MIN from dual ]]>
          </sqlStatement>
          <sqlStatement name="Q2">
               <![CDATA[SELECT dest.ID_DESTINATION, dest.DESC_DEST from ale.AAA_DESTINATION dest order by dest.ID_DESTINATION ]]>
          </sqlStatement>
          <sqlStatement name="Q3">
               <![CDATA[SELECT ser.ID_SERVICE,
ser.ID_DEST,
ser.DESC_SERVICE,
count.ID_COUNTRY,
count.ID_SERV,
count.COUNTRY,
count.CALLS,
count.CALLS_MIN
from ale.AAA_SERVICE ser, ale.AAA_COUNTRY count
where ser.ID_SERVICE= count.ID_SERV
and ID_DEST = :ID_DESTINATION
order by ser.ID_SERVICE ]]>
          </sqlStatement>
     </dataQuery>
     <dataStructure>
          <group name="G_TOT" source="Q1">
               <element name="TOTAL_CALLS" value="G_COUNTRY.CALLS" function="SUM()"/>
               <element name="TOTAL_CALLS_MIN" value="G_COUNTRY.CALLS_MIN" function="SUM()"/>
               <group name="G_DEST" source="Q2">
                    <element name="DESC_DEST" value="DESC_DEST"/>
                    <element name="DEST_CALLS_SUBTOTAL" value="G_COUNTRY.CALLS" function="SUM()"/>
                    <element name="DEST_CALLS_MIN_SUBTOTAL" value="G_COUNTRY.CALLS_MIN" function="SUM()"/>
                    <group name="G_SERV" source="Q3">
                         <element name="DESC_SERVICE" value="DESC_SERVICE"/>
                         <element name="SERV_CALLS_SUBTOTAL" value="G_COUNTRY.CALLS" function="SUM()"/>
                         <element name="SERV_CALLS_MIN_SUBTOTAL" value="G_COUNTRY.CALLS_MIN" function="SUM()"/>
                         <group name="G_COUNTRY" source="Q3">
                              <element name="COUNTRY" value="COUNTRY"/>
                              <element name="CALLS" value="CALLS"/>
                              <element name="CALLS_MIN" value="CALLS_MIN"/>
                         </group>
                    </group>
               </group>
          </group>
     </dataStructure>
</dataTemplate>
Not considering the CALLS and CALLS_MIN details (I focused only on the COUNTRY which is as the same level), with this data template, making tests on my excel template, I noticed that I can group ONLY two nested levels using the format XDO_GROUP_?group_name?
XDO_GROUP_?G_DEST?
XDO_GROUP_?G_SERV?
or
XDO_GROUP_?G_DEST?
XDO_GROUP_?G_COUNTRY?
or
XDO_GROUP_?G_SERV?
XDO_GROUP_?G_COUNTRY
If I try to group all the three level together in this order
XDO_GROUP_?G_DEST?
XDO_GROUP_?G_SERV?
XDO_GROUP_?G_COUNTRY
I don't have the output I would like to have.....
Practically, in my excel I have 3 rows with the following labels
DESTINATION (called XDO_?DESC_DEST? - =Sheet1!$A$3
SERVICE (called XDO_?DESC_SERVICE? - =Sheet1!$A$4
COUNTRY (called XDO_?COUNTRY? - =Sheet1!$A$5)
where
XDO_GROUP_?G_DEST? (=Sheet1!$A$3:$B$5)
XDO_GROUP_?G_SERV? (=Sheet1!$A$4:$B$5)
XDO_GROUP_?G_COUNTRY     (=Sheet1!$A$5:$B$5)
I noticed that if I don't use the last one (XDO_GROUP_?G_COUNTRY), my output is correct even if I don't have more than one country for each service....As soon as I put XDO_GROUP_?G_COUNTRY....I loose all the 2nd level and the most of times the 3rd level too....
So...I think that the problem is how I choose the excel cells when I assign the XDO_GROUP_?group_name?
Anybody had made some tests, or can help me ???? I'm becoming crazy.....
Any help will be appreciated
Thanks in advance
Alex

But how can I use tags XDO_GROUP_?? to group data correctly using hierarchial xml, I don't want to use flat XML.
Yep, I using Template Builder in Excel to run reports localy, and output is wrong
It's seems that groups couldn't define the level of nesting, I think...
How can I write it in XDO_METADATA sheet?
Though I have hierarchial XML and groups should define nesting level correctly.
I have no clue.....

Root.sh diskgroup already mounted in another lock name space

I have successfully installed oracle grid infrastructure 11.2.0.3 and have created an oracle database on an asm instance on top of it.
I installed the database as a RAC database on a single node db-test-mi-1, postponing the addition of a second node at a later time.
Now I have a second node db-test-mi-2, that I need to add to to the database.
I have successfully performed
cluvfy stage -pre nodeadd -n db-test-mi-2 -verbose
without any errors.
When I try to extend grid infrastructure to the new node, with
./addNode.sh "CLUSTER_NEW_NODES={db-test-mi-2}" "CLUSTER_NEW_VIRTUAL_HOSTNAMES={db-test-mi-2-vip}"
it works fine, but the script /oracle/app/11.2.0/grid/root.sh, from the grid home of the second node, generates an error
ORA-15032: not all alterations performed
ORA-15017: diskgroup "DATADG" cannot be mounted
ORA-15003: diskgroup "DATADG" already mounted in another lock name space
This is because of course the ASM instance on the first node is locking the disk group.
How can I extend ASM to the second node??
Any hel greatly appreciated

Hi,
Please refer
Troubleshooting 11.2 Grid Infrastructure root.sh Issues (Doc ID 1053970.1)
Thanks,
Rajasekhar

How can I create a host name site collection when I have a 443 web application already created for App model?

Hi all,
I have a 2013 farm set up with the App model
1 web application for path based site collection using host name
1 web application with SSL (no host name)
1 web application for mysite
My business request is that I need to migrate SSL enabled 2007 content to this farm and use host name site collections. I tried to create one more web application for this without any luck (the 443 IIS folder is already used by another web application).
I thought I bind the previous 443 web application with another IP address should be fine. Seems like the IIS site is taken (https://server name:443) so it will not let me create one more. How can I solve this problem so I can create the web application
to host those host name site collections? Any suggestion is greatly appreciated.
Thanks in advance.
Sally

Hi Trevor,
Thanks again for your quick reply. I try the option 2 right after your post. I use my front end server name for public URL (https://WFEName:443) and it fails again. The error message is:
The directory C:\inetpub\wwwroot\wss\VirtualDirectories\443 is already being used by another IIS Web Site. Choose a different root directory for your new Web application.
After reading more, I saw mix Hosted Name Site collection and Path-based site collection aren't recommended. Unfortunately I already have Path-based site collection created with App model web application
(the web application without host name) in my farm. In my Option 2, that web application without host name is used for App routing. This takes the root folder 443 which will not allow any other web application to use the same name again.
Does that mean we can't create Host Named Site collection in the same farm? Is there any configuration I need to check?
Thanks again.
Sally

System Center Virtual Machine Manager SC VMM 2012 SP1 Installation fails: Unable to assign the name NO_PARAM to this host because this name is already in use.

I'm trying to install VMM 2012 SP1 on a Windows Server 2012 machine and it fails with this error,
the scenario is as follows,
Old database (from 2012 RTM) exists on remote SQL 2012 SP1 server
Server was 2008 R2 SP1 so I decided to make a fresh installation of 2012 with the same name
installed ADK
specific error: 01:42:13:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException, Exception.Message: Unable to assign the name NO_PARAM to this host because this name is already in
use.
please help

I had a similar problem today when upgrading from SCVMM 2012 RTM to SCVMM 2012 SP1 RTM. To re-create the issue you describe originally you can actually just uninstall SCVMM 2012 SP1 RTM with "retain data" option and re-install the software on the same
computer (with the same name of course), attaching it to the retained DB. If you change the SCVMM server name I believe it will make some things go wrong after your install, like missing VM template passwords for example as the data gets encrypted in
the DB. Maybe it didn't but I didn't risk it. I definitely know if you change service accounts on a scenario like this you will be without the encrypted DB data which isn't much fun. To avoid changing the computer name, if you look in the setup log
files in %systemdrive%\ProgramData\VMMLogs\, specifically the SetupWizard.log file. You will see details on it failing because the same computer name is in the DB table "dbo.tbl_ADHC_AgentServer" and until it is removed from that table I wasn't able to get
the install to complete at all. The error in my logs looked something like this "InnerException.Type: System.Data.SqlClient.SqlException, InnerException.Message: Violation of UNIQUE KEY constraint 'unique_ADHC_AgentServer_ComputerName'. Cannot insert duplicate
key in object 'dbo.tbl_ADHC_AgentServer'. The duplicate key value is (computername.is.writtenhere). The statement has been terminated." In the row data in the DB it also seems to suggest that the computer name had "Virtual Machine Manager Library Files" on
it which is strange since I always remove the local SCVMM server as a library server after I install it and use an off box library server.

Create table with name already existed

Hello,
I am trying to create a table which has the same table name that already exists in a different schema. The table already exist in another user's schema but why can't I create the same table in my own schema with the same name? Thank you.

Check this out.
SQL> create user testuser1 identified by testuser1 default tablespace user01;
User created.
SQL> create user testuser2 identified by testuser2 default tablespace user01;
User created.
SQL> grant create session, create table, create public synonym,
2 unlimited tablespace to testuser1;
Grant succeeded.
SQL> grant create session, create table, create public synonym,
2   unlimited tablespace to testuser2;
Grant succeeded.
SQL> connect testuser1/testuser1
Connected.
SQL> create table mytable(col1 number);
Table created.
SQL> create public synonym mytable for testuser1.mytable;
Synonym created.
SQL> grant select on mytable to public;
Grant succeeded.
SQL> connect testuser2/testuser2
Connected.
SQL> create table mytable(col1 number);
Table created.
SQL> drop table mytable;
Table dropped.
SQL> desc mytable
Name                                      Null?    Type
COL1                                               NUMBER
SQL> desc testuser1.mytable
Name                                      Null?    Type
COL1                                               NUMBER
SQL> disconnect
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.3.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.3.0 - Production

You already have a schema opened on this file with another name: abc

I am trying to create a model for an XML file, when I clicked on "Objects to Reverse" checkbox under "Selective Reverse" tab, I am getting the following error:
java.sql.SQLException: You already have a schema opened on this file with another name: abc
I have created a Data Server in Topology whose schema and workschema are "abc" and logicla schema is "Labc".
Where is the mistake going in?

That is because you can only connect to a file in read/write mode once at a time. When you connect to a file without specifying ro=true (e.g. Read Only=true) in the URL, the file is locked and you can’t connect to the file from another instance until the original connection is dropped. I assume since you are trying to connect to the file multiple times that you mean to connect in readonly mode. To do this, like I mentioned earlier, simply add ro=true to your URL and you should be all set. Note: you may need o restart your JVM for chnges to take effect. Let me know if that works.

Find out Account Group for already created customer

Hi,
How do i find out Account Group for already created customer?
Is there any Tcode to find that?
Thanks in advance.
Swetha

Hii
Please check it in XD03 got to sales area tab under billing document tab u will find the account assignment group.

I'm trying to create a new ichat Acc because for some reason the old one is not working, so I go to Create an Apple ID and start creating a new apple ID, when I submit the Acc it tells me that my Email address is already verified for another Apple ID and

I'm trying to create a new ichat Acc because for some reason the old one is not working, so I go to Create an Apple ID and start creating a new apple ID, when I submit the Acc it tells me that my Email address is already verified for another Apple ID and thats the only email address I have... What can I do?

There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content.

How do i move a picture from one pdf-file to another already created pdf-file with adobe reader?

How do I move a picture from one pdf-file to another, already created pdf-file, with adobe reader?

Reader doesn't have editing capabilities.

Assign meter that already created from PM to rental object

Dear Expert,
Please kindly advice on how to assign the meter that already created (already has the measuring point ) into pooled space or rental object.
When I use REBDRO --> Meter Tab
the transaction allows only creation of new measuring point , Field Measuring Point is disable and allow to assign internally from the system
Best regards,
Tima

Hi Tima,
I dont think it is possible to assign the measuring point already created to RE Objects. As, if we go to transaction IK01 we select the Measuring point object as "IME" and then select the object type and ID. If we use any other measuring point object we dont have the option to enter the Rental object type and rental object ID to create the measuring point. So any measuring point created with any other Measuring point object cant be attached to the rental objects.
Even if we directly create measuring point from rental object, the object is created with "IME" Measuring point object.
Regards,
Deepak M

POWL 'Query Name is already open in another session'

Hi there,
Our users are constantly getting the following error message when using POWL's in the Portal.
Query <Name> is already open in another session' (POWL 016)
The error occurs when a user tries to refresh a query and the query is locked in another session (ENQUEUE_EPOWL_QUERY_EDIT Exception foreign_lock).
There are various root causes to why this error happens, system, application, communication etc. The one I am seeking help on occurs when the user abruptly terminates the browser session (forced or unforced) and the orphaned session is unable to close properly leaving the POWL query locked.
We are currently informing the users to
1.) close all windows and reload the worklist.
and in certain circumstances
2.) log off and log on again
The above workaround doesnt always solve the problem. We are reluctant to give users access to SM12.
Has anybody encountered something similar, if so were their specific settings, notes, code etc. which needed to be implemented?
Cheers
John P

Try the following steps
Please implement the note 1836401 and the prerequisites 1873487,1902580 .
Identify the POWL Query name and set the refresh type as: 'refresh on every LIST VISIT'.
Important: Run the report POWL_D01 and remove the result list of your POWL
Application ID, it#s very important because the cache would still contain the old refresh type and will not recognize the new refresh type, please run the report at first for one user ant test the behaviour, if it works run it for all other user
Pass the application parameter REFRESHA with value X to your POWL application. After that retest your issue, it should work. if not implement the note 1975395 and its prerequisites and test again
Best regards,
Robert.

I created a Group and put in all names and email addresses but cannot get the group to appear in an outgoing email message. What am I doing wrong?

I created a Group and put in all names and email addresses but cannot get the group to appear in an outgoing email message. What am I doing wrong?

This may help.
Can't connect to the iTunes Store
What happens whenyou try to connect? Error messages?

Help with importing photos - IPhoto assigning file names that already exist

When I import photos from my canon powershot camera, IPhoto has begun assigning file names that are the same as filenames that already exist on photos imported previously. It appears it is deleting those older files (when I go look in my photo library, the older one with the same name is now gone).
I don't know how to name photos as they are imported as it seems to be done automatically and I'm afraid to import more photos and loose my old pics. Can't find anything on the internet when I search on this question - can anyone help?

Thanks so much for your quick reply, TD.
What happens when I plug in my camera is that Iphoto opens, asks me if I want to import photos (and if I want to delete originals), and I click okay or whatever and they are imported. I name the roll/folder, and I photo puts them in the library in that folder in that year.
It makes sense that the camera is numbering them. I think that the ones it is using the same numbers for (ie - IMG0080.jpg) are the numbers on older photos that were assigned by a different camera that we used to have.
So I guess the canon isn't searching on all photo names that have been used, just the ones that it has used in the past.
Unfortunately, when the new photo is named with the same name as an old one, that old one is literally deleted - at least as far as I can tell - and when I go look for it in my photo library, it is no longer there.
I might try to see if there are any help forums for the canon powershot and see what I might learn there.
THanks so much for your help!

Table name for Customer Account Group and created by Data

Dear Gurus,
Kindly le t me know the table name having a list of Customer a/c groups and created by data. if there is no such table thn pls let me know the alternatives for fetching the same data.
Wishes
Abhishek

hI
Go to Se11 and give table name KNA1 and go to display
you can able to see the Customer AccountGroup field :KTOKD
Thanks
Vasu

Group Already Created (Assign Another Name)

Similar Messages

Maybe you are looking for