Group Assignment and Analytics Visibility

Hello,
We are thinking of using the Group Assignment feature in On Demand. However, I have not found documentation on how this affects Analytics reporting visibility. I see the options for Manager, Team, and Full Visibility for Analytics. However, I would like to find out if users belong to a particular Group, would they also have visibility to those associated Accounts, Opptys, etc associated with that group in Analytics by using Team Visibility?
Thanks!

Imagine if we two are sales rep belonging to the same team then I would see records for which i am owner and also records for which my team members are owner.So we can see each others data provided we are on the same team and team visibility is applied under our user profile.

Similar Messages

LT41 - No active selection for group assignment

Hello Guru,
i need to group transfer requirement by transaction LT41 but when i try to select TR to assign them a group I always get the same error " No active selection for group assignment" and I´m not able to select transfer requirements.
Maybe is there a customizing not done?
Anyone can help me?
thanks in advance
Boris

Hi,
I'm not sure this help you or not but as a prerequisit of this sceanrio you have to make some settings for your WH (allow partial processing / SPRO > LE > WM > Master Data > Define control Parameters for WH No.). Please check the customizing step in SAP help:
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
Please also check whether you follow the proper steps during creation of a group:
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f841ff4afa11d182b90000e829fbfe/frameset.htm
Csaba

Analytics Visibility - Books of Business and Direct Reports

We have a manager who has looks over two key accounts and also has a few employees who deal with smaller deals.
For the two major accounts, the opportunities are assigned Books of Business and each book rolls up to the same parent book.
When the manager runs a report, and picks the parent book at the 'Look In', will they see other opportunities that are owned by people who report to him/her, or will they just see opportunities that have the books of business on them.
In a perfect world, they would like to see the key account opportunities as well as the other opportunities for people who report to them.
Can this be done?

David,
I will email you a file that explains analytics visibility in R15.
The file is also available on Metalink for anyone else who needs the information... search for analytics visibility.
Mike L

How to group data and assign cell names using Excel templates

Hi all,
reading the article "Real Excel Templates 1.5" on the Tim Dexter's Blog, I found that I need hierarchical data for Excel templates. So only in this way I can group my data.
My hierarchy is composed by 3 levels:
lev 1 DESTINATION: is the higher level that groups SERVICES and COUNTRY
lev 2 SERVICES: is the level that groups the countries
lev 3 COUNTRY: is the lowest level with the COUNTRY, CALLS and CALLS_MINUTES details
An example of my hierarchy is this:
lev 1 INTERNATIONAL
lev 2 INTERNATIONAL FIXED
lev 3 Albania 90 438,15
lev 3 Armenia 1 16,95
lev 2 INTERNATIONAL MOBILE
lev 3 Albania Mobile 161 603,35
lev 3 Australia Mobile 6 34,38
lev 1 NATIONAL
lev 2 HELLAS LOCAL
lev 3 Hellas Local 186,369 707940,6
lev 2 HELLAS MOBILE
lev 3 Hellas Mobile Cosmote 31,33 43856,97
lev 3 Hellas Mobile Q-Telecom 2,398 4343,78
lev 2 HELLAS NATIONAL
lev 3 Hellas Long Distance 649 1499,55
lev 1 INTERNET
lev 2 INTERNET CALLS
lev 3 Cosmoline @Free 79 2871,3
So, my data template is the following (with exactly the hierarchy I want for my data):
<dataTemplate name="emp" description="destinations" dataSourceRef="GINO_DB">
     <dataQuery>
          <sqlStatement name="Q1">
               <![CDATA[SELECT 1 TOTAL_CALLS, 2 TOTAL_CALLS_MIN from dual ]]>
          </sqlStatement>
          <sqlStatement name="Q2">
               <![CDATA[SELECT dest.ID_DESTINATION, dest.DESC_DEST from ale.AAA_DESTINATION dest order by dest.ID_DESTINATION ]]>
          </sqlStatement>
          <sqlStatement name="Q3">
               <![CDATA[SELECT ser.ID_SERVICE,
ser.ID_DEST,
ser.DESC_SERVICE,
count.ID_COUNTRY,
count.ID_SERV,
count.COUNTRY,
count.CALLS,
count.CALLS_MIN
from ale.AAA_SERVICE ser, ale.AAA_COUNTRY count
where ser.ID_SERVICE= count.ID_SERV
and ID_DEST = :ID_DESTINATION
order by ser.ID_SERVICE ]]>
          </sqlStatement>
     </dataQuery>
     <dataStructure>
          <group name="G_TOT" source="Q1">
               <element name="TOTAL_CALLS" value="G_COUNTRY.CALLS" function="SUM()"/>
               <element name="TOTAL_CALLS_MIN" value="G_COUNTRY.CALLS_MIN" function="SUM()"/>
               <group name="G_DEST" source="Q2">
                    <element name="DESC_DEST" value="DESC_DEST"/>
                    <element name="DEST_CALLS_SUBTOTAL" value="G_COUNTRY.CALLS" function="SUM()"/>
                    <element name="DEST_CALLS_MIN_SUBTOTAL" value="G_COUNTRY.CALLS_MIN" function="SUM()"/>
                    <group name="G_SERV" source="Q3">
                         <element name="DESC_SERVICE" value="DESC_SERVICE"/>
                         <element name="SERV_CALLS_SUBTOTAL" value="G_COUNTRY.CALLS" function="SUM()"/>
                         <element name="SERV_CALLS_MIN_SUBTOTAL" value="G_COUNTRY.CALLS_MIN" function="SUM()"/>
                         <group name="G_COUNTRY" source="Q3">
                              <element name="COUNTRY" value="COUNTRY"/>
                              <element name="CALLS" value="CALLS"/>
                              <element name="CALLS_MIN" value="CALLS_MIN"/>
                         </group>
                    </group>
               </group>
          </group>
     </dataStructure>
</dataTemplate>
Not considering the CALLS and CALLS_MIN details (I focused only on the COUNTRY which is as the same level), with this data template, making tests on my excel template, I noticed that I can group ONLY two nested levels using the format XDO_GROUP_?group_name?
XDO_GROUP_?G_DEST?
XDO_GROUP_?G_SERV?
or
XDO_GROUP_?G_DEST?
XDO_GROUP_?G_COUNTRY?
or
XDO_GROUP_?G_SERV?
XDO_GROUP_?G_COUNTRY
If I try to group all the three level together in this order
XDO_GROUP_?G_DEST?
XDO_GROUP_?G_SERV?
XDO_GROUP_?G_COUNTRY
I don't have the output I would like to have.....
Practically, in my excel I have 3 rows with the following labels
DESTINATION (called XDO_?DESC_DEST? - =Sheet1!$A$3
SERVICE (called XDO_?DESC_SERVICE? - =Sheet1!$A$4
COUNTRY (called XDO_?COUNTRY? - =Sheet1!$A$5)
where
XDO_GROUP_?G_DEST? (=Sheet1!$A$3:$B$5)
XDO_GROUP_?G_SERV? (=Sheet1!$A$4:$B$5)
XDO_GROUP_?G_COUNTRY     (=Sheet1!$A$5:$B$5)
I noticed that if I don't use the last one (XDO_GROUP_?G_COUNTRY), my output is correct even if I don't have more than one country for each service....As soon as I put XDO_GROUP_?G_COUNTRY....I loose all the 2nd level and the most of times the 3rd level too....
So...I think that the problem is how I choose the excel cells when I assign the XDO_GROUP_?group_name?
Anybody had made some tests, or can help me ???? I'm becoming crazy.....
Any help will be appreciated
Thanks in advance
Alex

But how can I use tags XDO_GROUP_?? to group data correctly using hierarchial xml, I don't want to use flat XML.
Yep, I using Template Builder in Excel to run reports localy, and output is wrong
It's seems that groups couldn't define the level of nesting, I think...
How can I write it in XDO_METADATA sheet?
Though I have hierarchial XML and groups should define nesting level correctly.
I have no clue.....

Need to understand Site Assignment and Content Location Boundary Groups

Okay I am very confused about something that I am seeing that is throwing my understanding of how Boundary Groups work completely off.
Here is my dilemma:
I created two boundary groups, a site assignment and a content location boundary group. The site assignment boundary group contains all of my sites. The content location boundary group I have just has my datacenter systems where the DP installed on my site
server is being referenced in that boundary group.
Now, I had two pilot deployments. The very first pilot deployment I had I created a content location boundary group for that site and referenced the local DP and when I deployed software updates to the clients there, I kept getting timeout errors. The second
pilot deployment i had, I totally forgot to create a content location boundary group, but the software updates installed perfectly fine on those clients.
What the heck is going on here?
I thought if a content locatoin boundary group was NOT created for a remote site, then those clients would not be able to receive any content at all, period.
Can someone please, please explain to me what is going on here?
Thanks everyone

A couple of additional comments here that build on the previous by Peter and Nick.
Site assignment has nothing to do clients finding content so while it's good that you have a site assignment boundary group and even that you mentioned it, it has nothing to do with what's going on here. Also as a semantic side note, when referring
to remote locations, you shouldn't use the word "site" when discussing ConfigMgr because "site" means something very specific and could cause confusion. I typically try to use the word "location".
Clients that do not fall into a boundary within a content location boundary group automatically fall into a "default" boundary marked as slow in a default "boundary group". Neither of these is defined anywhere in the console or the product
so default isn't exactly the right word here, but it does convey the meaning. Thus, not being in a defined boundary does not mean that clients cannot get content, just that they will only get content allowed for slow boundaries or where fallback is enabled.
Jason | http://blog.configmgrftw.com | @jasonsandys

Effective start and end dates for roles/group assignment

Hi,
Does Access Manager (in legacy or realm) mode support effective start date/end date on a role/group assignment on a user?
Thanks,
Srinivas

Hi Ankush,
I am also of the same opinion. Start and end dates can probably be enforced by a policy condition in AM but would lead to proliferation of policies as we would end up creating policies per role entitlement duration for a user.
Any thoughts on whether the sunrise/sunset concept of Identity Manager can be used for this requirement.
Thanks,
Srinivas

Need user and Groups assigned to each folders(KM) under service permission

Hello Experts,
Need you help for one requirement , in which i need to provide a list of users and groups assigned under Service permission for each KM folders. There is huge amount of folders so it is quite time consuming to get each folders open & to check the service permission and user.
Do you have any idea on this? Any sugesstion would be appreciated in points.
-Regards
AK
Edited by: AlokSBP on Oct 7, 2011 8:46 AM

Hi,
You'll find a lot of help on this if you search for ACL and permission in this forum.
Here is a code sample of what to use:
IAclService aclService = (IAclService) repServiceFactory.getRepositoryService(resource, "ServiceAclRepositoryService");
                    IResourceAclManager servAclMgr = aclService.getAclManager();
                    if(servAclMgr != null) {
                         IResourceAcl servAcl = servAclMgr.getAcl(resource);
                         if (servAcl == null) {
                              logger.debugT("no ServiceAcl found ");
                              logger.debugT("getting ServiceInheritedAcl ");
                              servAcl = servAclMgr.getInheritedAcl(resource);
                         if(servAcl == null){
                              logger.debugT("no ServiceInheritedAcl found");
                         }else{
                              // Iterating through the ACL list
                              IResourceAclEntryListIterator servAclList = null;
                              IResourceAclEntry servAclEntry = null;
                              for(servAclList = servAcl.getEntries().iterator(); servAclList.hasNext();)
                                                //here do what you need to do. For example
if(servAclEntry.getPermission().getName().equals(IAclPermission.ACL_PERMISSION_FULL_CONTROL))
                                        logger.debugT("This is a Full Group ");
Regards,
Thomas
Edited by: Thomas Pary on Oct 10, 2011 1:59 PM

How to retrieve the Role of a custom sharepoint Group Progrmatically and also assigning the same roles to new user?

I want to retrieve the roles assigned to custom group progrmatically and assigning the same roles to new user?

Hi,
According to your post, my understanding is that you want to retrieve the Role of a custom sharepoint Group Progrmatically and also assigning the same roles to new user.
To retrieve the Role of a custom sharepoint Group, you can refer to:
http://www.sharepointfix.com/2011/05/find-rolepermissions-of-currently.html
To assign the same roles to new user, you can refer to:
http://msdn.microsoft.com/library/Microsoft.SharePoint.SPRoleAssignment
Best Regards,
Linda Li
Linda Li
TechNet Community Support

No Assignment of Payroll Data to BW Month for Country Grouping 10 and 13

Hi Gurus,
I get the error "No Assignment of Payroll Data to BW Month for Country Grouping 10 and 13" when extracting data for 0PY_C02. I then added the "End Date of For Period" in the SBIW in the Payroll systen activity "Assignment of Payroll Data to BW Month". I am still getting the same error???
Also I do have data in the cube from that extraction, but when I run a query I get no data?? Is this due to the above error?
Thanks,
Garth

Hi,
The extractor runs without errors in RSA3 in the source system. The error is red with the test of "No Assignment of Payroll Data to BW Month for Country Grouping 10 and 13". I completed the SBIW task to set this in the source system but I still get the same error?
Any other ideas?
Thanks,
Garth

Hide and make visible a group of buttons controls or indicators

HI
well, may be sound weird?, but I need to hide and make visible a group of
buttons, controls, indicator, graphs etc.
the pint is that I have for example like 20 buttons, and depending of the
actions of the users I need to hide them or not, I know I can do it one by one
with the visible property, but I was wondering if there is a possibility to do
it but all together, with the same property, like put all the buttons or control inside a
subpanel and then hide the subpanel? I tried this but didn´t work
any suggestions?
thanks!!!!

You can put all of your controls in a cluster. The reference to the cluster - Property node> Controls [] - will be an array of references. From there you can control the visibility of each control.
PaulG.
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind except that you happen to be insane." -- George Orwell
Attachments:
cluster ctrls visible1.vi ‏12 KB

Group Policy Guru? Group Policy and Windows 7 erratic and inconsistant.

(*If you don't feel like reading everything, skip to the bottom two paragraphs for my questions)
I've had a premier call open with MS since August. This week I had a Microsoft Technician in-house. Though we eliminated some possibilities, we're not really closer to a cause or solution.
Every time we work with an expert, I get a different explanation to describe the situation we are viewing.
Quick summery of the issue: We've been using Group Policy to manage most Windows XP and 7 settings for years, but starting the middle of last year, we began having clients with machines where some or all group policies would fail to apply.
These could be long assigned policies, new polices, or changes to policies. It would never affect everyone or even a majority at once, and the resolution is never the same. Sometimes a GPUDPATE /FORCE sometimes fixed automajically the next day,
sometimes (but very rarely) longer.
Troubleshooting History:
What we found in early troubleshooting, that these machines, had errors in Event Viewer for Netlogon, Time-Sync, and Group Policy. The other issue we noticed, was that our GPRESULT /H reports were missing security groups and the denied section was
nothing but SSID's. The first issue pointed me to:
Event ID 5719 and event ID 1129 may be logged when a non-Microsoft DHCP Relay Agent is used
I installed these Hot Fixes. No change to any of the errors in event viewer, or to our Group Policy problems.
Initial work with Premier Support found that Netlogon, Time-Sync, and Group Policy, were failing before loading of the network stack. The suggestion was to apply the group policy setting "Always wait for the network at computer startup and
logon". At the time, this seemed not to work. The policy was set on a test bed of laptops and desktops, and no changes in behavior were seen after 3 days.
Windows 7 Clients intermittently fail to apply group policy at startup
For some time after this, we were collecting GPSVC and NetTrace logs for Premeir Support, trying to document and troubleshoot the problem. Eventually we got fed up and asked our TAM to call in a pro to get this resolved. We were sent an engineer
for 3 days. For three days we banged away on this issue. We verified AD and replication health, we tried numerous fixes and workarounds. I learned 3 different desriptions of how Group Policy works, and in the end we thought we had a workaround
using the "Always wait for the network at computer startup and logon" because of a single success late in the day. On day 3 we tried replicating this fix, and quickly realized that the same issue we were having preventing other GPOs to apply,
were also preventing our "fix" GPO from applying. So we went the route of using a registry entry. I also had a problem that even though it was making the process more consistant, it was still taking 3 reboots for a Computer Policy, assigned
to a computer object via Security Group, to fully take affect on a computer.
I used the registry methods in the above article. It didn't work, no sign it was having the same affect the GPO had had.
Our support engineer claimed this was the proper method, but that path wasn't even close in a Windows 7 SP1 registry, and after creating all the keys that were not present, it still didn't work.
Always wait for the network at computer startup and logon - AzureWeb
We ran out of time, our engineer returned home.
I can understand how these errors indicate a problem applying Group Policy at boot. But to me it doesn't explain why it doesn't correct post boot, and after a GPUDPATE /FORCE and a reboot.
It also doesn't explain why we were working fine for years, then all of a sudden DHCP is being outrun by background services. (By the way logging showed DHCP wasn't significantly delayed, out boot process was actually excellent, health wise.)
Why all of a sudden is this not behaving optimly? No changes to network design or function. No changes to the domain since 2008 R2 was installed in 2011.
Today I'm reading through all these KB's and articles again, and took some time to read:
[Forum FAQ] Common steps to start troubleshooting Group Policy
application and it's links below.
We ran though all of that before and during the 3-day onsite. It's not getting us any closer to the cause or a solution.
I found and begin some deep reading in this link today. It has some additional information I will try to use next week:
Group Policy Basics - Part 3: How Clients Process GPOs
The one unanswered question I have is this. How is group policy supposed to apply to a computer, when that policy is applied to a AD Security Group, in which the computer object is a member?
Before we began having this problem, we would assign a computer GPO, then ask the user to reboot. If it were a user GPO, we'd ask the user to log off, or reboot. Either way, if we allowed a few minutes for AD and FRS replication, the user would
log back in with that new policy in affect. A new imaged machine would boot with all the GPO's linked to that domain and assigned to "Authenticated Users", already in affect. Admin groups would be present in administrators, proxy settings
would be set in Internet Explorer, etc.
Now I'm aked to beleive this was never the case from Premeier Support and Microsoft Engineers. That those policies require the equilent of a "GPUPDATE /FORCE" that was executed by the Local_System account. That 3 reboots may
be nessessary for a group policy to be applied. One for the AD Security Group to be applied. One for the Computer Policy to be applied. And a final one for the policy in the GPO to be applied to Windows.
Can someone confirm or correct this information please? It's imperitive to my troubleshootng.
There's no place like 127.0.0.1

That key is empty on all of my machines I have checked today. Working and problematic alike.
GPRESULT logs, when ran as me, historically would show the group polices applied, denied, and the AD group membership all by name. About 6 months ago I noticed this changed.
Now they show the applied GPO's by name, a few of the denied GPO's by name, most by SID, and only 2 to 3 AD groups, though PowerShell shows all the AD groups assigned. This happens after several AD security and distribution groups are added to the
machine (Radia software distribution uses Dist groups to assign software).
A check showed no groups with long legacy Kerberos keys.
When we make a change to AD Security Group membership, to assign or deny a Group Policy, is usually when we encounter this problem. It will usually fix itself in 24 hours of the machine being left up and running. But no amount of GPUPDATE /FORCE
and rebooting will cause the changes to take affect.
During this time, the Group Policies will show assigned to the computer in the GPRESULT log.
Yesterday I began looking into Spanning Tree configuration on our network being a possible cause for the boot up issues. I'm waiting on responses from our Network group to confirm our configuration.
There's no place like 127.0.0.1

CiscoWorks user options "device type groups|switch and Hubs"

Hi,
We are using CiscoWorks software to deploy new configuration to our network devices. Because our environnement is mixed about version of network devices we have to create a new netconfig job for each device model, because in some plate-forme configuration option, syntax maybe different of each other.
When I create a new netconfig job with my username under "device type groups|switch and Hubs" I have a list there of all plate-forme we have in our production environnement managed by CiscoWorks software. I know thoses group was'nt define by on of us and thoses are define by default in CiscoWorks software, but they are hiden by default per user basic.
We have a new one in our team, I had created his user name and password, but I can find the option where I can asked to make visible to him plate-form device type group as I have in my user configuration.
Also, is it possible to copy private define group to an other user without to make thoses as public ?
Thanks a lot !

Here,
is a view of what I have with my user
but in his profile he is only see
Device type Groups
     + Routers
     + Switches and Hubs
     + Wireless
if he clic on the plus sing to develop group "Switches and Hubs" he see all switches and hub managed by CiscoWorks software. I know He did not create Cisco Catalyst 2912 XL Switch and Cisco Catalyst 2924 XL Switch group in my profile. I know we have to modify an option in CiscoWorks per user basic to view those group, the person who where that option should be modifiy is currently in vacation, but he will need that option enable before our specialist will be back !
Thanks a lot !

The business system HRK_005 is not a business system in the group assigned

Hi there,
i have a Problem. I want to transport a Scenario from our Consolidation to our Prod System.
In this Szenario, there are XI and HR Systems included.
On Consolidation Side:
XIK_001
HRK_005
in Prod
XIP_001
HRP_001
When i now export the whole Scenario from our K System and want to import it to our P Systems the following error occurs:
The business system HRK_005 is not a business system in the group assigned to production.
I have no System HRK_005 in production. HRK_005 is in Group Consolidation?!?
Can someone help here?
Thanks
Bjoern

Oops i spoke with u r key code it bounced back .
Well i explained standard way to export and import Intergration Directory objects.
K - Development System ( SLD_Dev)
P - Production System (SLD _Prod)
In K - SLD_Dev needs Group -- This is based on the Integration Server (IS) of the K / P XI server.
IS (K) -- Group1 / IS (P) -- Group2 (All this in the SLD_Dev)
Assign all BS of K to Group1
Assign all BS of P tp Group2
For BS of K specify the target transport as Production BS (P).
Now goto P (SLD_Prod) create the BS as same in K what you have created in Group2
Now export from K (Dev) to P(prod)
am not able to view the link provided.
Any ways i have listed standard way for transport, hope this helps
Srini

Group above and left classic reports

how can i group above and left in an existing classic reports? is there any document around here please share it to me.

>
Please update your forum profile with a real handle instead of "user13653962".
how can i group above and left in an existing classic reports? What does "group above and left" mean? A demonstration layout on apex.oracle.com or here (using tags<tt>\...\</tt> tags to preserve formatting) would be helpful.
The options for break formatting on classic reports are:
<li>The basic built-in control break features.
<li>Simple DIY break layout on any number of columns using analytics in the source query: +{message:id=10679160}+
<li>Complex report layout with multi-level headings using analytics in the source query and a custom named column report template with conditional row templates: +{message:id=9816577}+
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.

Report User (groups) assigned to Bundles

Hi,
i need a report of users or user groups assigned to Bundles. I can create a report of Workstations assigned to Bundles. But the users are LDAP users, so they're not available in the user database of ZCM? Is there an option to report Bundles and there assigned LDAP Users or User Groups?
Regards,
Patrick

petjez,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Group Assignment and Analytics Visibility

Similar Messages

Maybe you are looking for