Group By Column using Wizard - Begin each group on new page...?

I have a report w/ just one query, and I'm using the wizard to designate a column by which to group the data. What I need to do is begin each new group on a new page. I can do this by setting the region for my grouped field header as 'Yes' for Page Break Before, but that always creates a blank page as the very first page of the report.
Is there an easier way for me to do this?

Yes -
Set the Maximum Rows per page to 1 for the repeating group which you want to separate.
For example if you had a list of employees grouped by department, if you set that property on the repeating frame for the department frame, each department would appear on a separate page.
Thats a confusing thing to new users of Reports :)

Similar Messages

  • From XML (import) for each record automatic new page creation?

    Hello,
    I'm playing around with XML.
    Can someone tell me where to look and help me?
    I load variable data via XML.
    Example content xml:
    <pages>
         <page>
             <id>1</id>
             <article>title page 1</article>
             <info>Info page 1</info>
             <price>price page 1</price>
         </page>
         <page>
             <id>2</id>
             <article>title page 2</article>
             <info>Info page 2</info>
             <price>price page 2</price>
         </page>
         <page>
             <id>3</id>
             <article>title page 3</article>
             <info>Info page 3</info>
             <price>price page 3</price>
         </page>
    </pages>
    I have 1 page classified (ie 3 text boxes). The idea is that for each record in the xml (in this case 1, 2 and 3) a new page is created (Qua layout identical to the page that I had prepared, but with the corresponding data in each box)
    How do I do this?
    Thanks!

    If you need to keep the three parts of your page in separate text frames, you are probably out of luck.
    I can't tell from your question whether you know how to tag frames and import XML content into them. If you don't, the manual is fairly clear on it. However, it states more than once that "InDesign flows merged XML content into existing frames only."  That means that it won't add frames or pages for you -- you can only load XML into tagged frames on the first page and will have to add extra ones by hand.
    If you could rework your design so that all the elements could be accommodated in a single text frame, using paragraph styles to keep them apart, you could just import the XML and map tags to styles, then drag it into a frame on the first pages. If your article style was set to start in a new frame,  everything but the first would go into overset text, which you could deal with in the usual way -- shift-click on the in port of a new frame and InDesign will add the pages you need.

  • Forcing a new page and using CAN GROW in a group header section??

    Two Questions:
    1) Is it possible to force a new page at any given position of the report?
    I have a summary report with drill downs.  My problem is that the vendor name and address (group 3 which is split into 3 subgroups GH3a GH3Bb GH3c) is sometimes at the end the page and the rest of the information (detaila and detail b with GFs) continue on the next page.
    Can I specify a specific time or position when to page so that if this happens I can make the vendor name print on the next page?
    I know of the keep group together option in the section expert but that keeps the detail together with the group heading - which is not the problem I am trying to resolve.
    2) Can the group header and group footer sections be set to CAN GROW?
    Thank you,
    JS

    If a field exists in a section and the field is set to can grow, the section will grow with the field.
    CR2008 allows you to page after X number of records in the details section. See section expert, paging tab (Details Section)
    If you are not using CR2008 you could calculate the number of records per group and new page after this based on the number of records.

  • Javascript errors - Summing columns using Javascript

    Hi
    I have two regions on a page which are tabular forms that I have manually setup using APEX_ITEMS that I would like to use some JavaScript to pick up the values entered and sum that row up. I used Vikas example for tabular form calculation and it works perfectly for 1 region however if I have two regions it seems to give me the following error message in Firefox:
    g_table.rows[rownum].cells[getCellPos(g_table, html_GetElement("COL05"), "column")] has no properties
    Which I gather is because there are two columns on the page named COL05 and idea how I could get around this problem.
    I've put an example here: http://apex.oracle.com/pls/otn/f?p=35414:4

    Hello,
    It could be a bit difficult to auto sums a row, as
    usually rows include non-numeric columns. In any
    case you can always use a computation column in your
    select statement, or build a derived column in the
    report attributes tab. The problem is to update these
    columns in real-time, after a specific cell has been
    changed, and for that you need JavaScript.I realised this thats why I wanted to pickup the column and Row and then I would be able to replace the value in the specified column ie. total column using javascript for each row.
    I’m not sure I’m following you, but if you mean the
    current (active) rownum per displayed report page,
    you can use the #FIRST_ROW_FETCHED# and
    #LAST_ROW_FETCHED# substitution strings, in the
    footer of the report region.
    If you meant something else, please elaborate a bit
    more.Look at the revised demo app http://apex.oracle.com/pls/otn/f?p=35414:4 as you can see in this particular example each region returned 15 rows of data. I wondered if there was a way to pick up the last row returned so that I could use the same javascript function I use to calculate the rows I could update that specific column/total row. Example, in my demo app you will see a null row returned I would like to find this row then update the values.

  • How to trigger New page while using ALV with classes/oops?

    Hi All
    I am trying to print a report which has to show the data in two pages.
    I am using ALV with classes/oops.
    Though I am able to print the report but a new page is not coming. Whole of the data is coming in one single page.
    Please tell me as to how to trigger a NEW PAGE while using ALV with classes/oops.
    Please send some code samples also if available.
    Thanks in advance.
    Jerry

    using sort option you can do it. in case of grid/oo alv class ALV you can view that only in print mode/preview mode.
    in case of list you can view that directly.
    sort-fieldname = 'FIELDNAME'.
    sort-group = '*'  "triggers new page
    sort-up = 'X'.
    append sort to it_sort.

  • Each record diplay in new page

    Hi All,
    How to display the data in diff pages.
    Means each record in new page.How i will do.
    Thanks in advance.
    Subbu

    hi
    in your table under main area create one command and in that command go to next page 'xxxx'. then every record is printed in new page.
    regards,
    ananth

  • Sum of LineCount Including Groups and Detail Data On Each Page Used To Generate New Page If TotalPageLineCount 28

    Post Author: tadj188#
    CA Forum: Formula
    Needed: Sum of LineCount Including Groups and Detail Data On Each Page Used To Generate New Page If TotalPageLineCount > 28
    Background:
    1) Report SQL is created with unions to have detail lines continue on a page, until it reaches page footer or report footer, rather than using  subreports.    A subreport report is now essentially a group1a, group1b, etc. (containing column headers and other data within the the report    with their respective detail lines).  I had multiple subreports and each subreport became one union.
    Created and tested, already:
    1) I have calculated @TotalLineForEachOfTheSameGroup, now I need to sum of the individual same group totals to get the total line count on a page.
    Issue:
    1) I need this to create break on a certain line before, it dribbles in to a pre-printed area.
    Other Ideas Appreciated:
    1) Groups/detail lines break inconveniently(dribble) into the pre-printed area, looking for alternatives for above situation.
    Thank you.
    Tadj

    export all image of each page try like this
    var myDoc = app.activeDocument;
    var myFolder = myDoc.filePath;
    var myImage = myDoc.allGraphics;
    for (var i=0; myImage.length>i; i++){
        app.select(myImage[i]);
        var MyImageNmae  = myImage[i].itemLink.name;
        app.jpegExportPreferences.jpegQuality = JPEGOptionsQuality.high;
        app.jpegExportPreferences.exportResolution = 300;
           app.selection[0].exportFile(ExportFormat.JPG, File(myFolder+"/"+MyImageNmae+".JPEG"), false);
        alert(myImage[i].itemLink.name)

  • Each groups on separate page

    Hi
    i having one report (IDS 10g) with group above format and i want to print each groups in each page how can i achieve that.Printing each groups here departments on each page
    rgds
    jyothi

    Jyothi,
    You can set the group Frame's property Page Break After to Yes. Then each group will come in new page.
    Regards,
    Manu.
    If this answer is helpful or correct, please mark it. Thanks.

  • Each Group should start on a new page

    Hi,
    What setting I need to make in the CR XI so that each Group starts on a new page?
    Thanks,
    Reena

    After you check the new page after, click on the X+2 button to enter a formula.
    In the formula type this:
    Not OnLastRecord
    I hope that helps.
    Regards,
    Zack H.

  • To view reports in new page for each cutomer using Report Designer

    HI all
    I have a requirement to view the data (key figures) for each customer in a new page.
    I have created the same using the Report Designer tool.
    Now there is setting for this Group Header 'Customer' i have selected the option 'repeat group header on each page'
    still the query when generated, gives fine results for certain cases but not for all.
    like it will show the each customers in a fresh page for some pages , then in midst there would some 2-3 customers in the same page.
    There is no relation between these customers , they are same as the other customers, no difference at all.then i am not able to figure out the reason why it is behaving so odd.
    Thanks
    Ramesh

    Ramesh,
    right now there really is no way to solve what you are looking for.  There partial solutions, but you will not be able to force a page break in a dynamic report.
    Here is what I have faced, and what I have come up with so far:
    I have a series of reports that have the same column heading, but spread over 5 pages in a fixed structure.  I need to be able to re-use the header and the general report design with 6 reports.  Here is my solution:
    1. Create an outline of the report.  I did all the formatting by creating a report section for each page.  You can force page breaks between the pages.  Upgrade to patch 1502 (came out last week) and you will see some new functionality (such as fit to page, page numbers, etc).
    2. Insert all you page breaks and do all the formatting.
    3. Insert an infoprovider.  Once in, you can just drag and drop the key figure cells into your formatted report.
    4. Create additional modification for formatting as needed.
    This fixes my problem (for now), but I had to do a lot of work to come up with this.  Also, the latest patch (1501 and 1502) has created an issue for me - there is a null exception when I try to use a variable or a filter value in the report body - I can't save the report.  I have an OSS message out, but our BASIS guys are going to be taking the lead on troubleshooting this.
    The reason that you are seeing some customers on the new pages is probably because of "how the cookie falls" - they just fit that way.
    I am trying to be positive and overcome the limitations that are in place right now. If my technical issue is solved, I would recommend upgrading to the new patch (1403 is the latest stable one in my opinion)
    good luck
    Pavel

  • Associating a certain "useful life" for each "Asset Class" ?

    Hi All
    Could anyone tell me how to associate a certain "useful life" for each "Asset Class" ?
    Which's customizing navigation?
    Thanks
    Gandalf

    Hi Try this..
    If you go to IMG (Transaction SPRO) :-
    -> Financial Accounting
    -> Asset Accounting
    -> Master Data
    -> Screen Layout
    -> Define Screen Layout for Asset Depreciation Areas
    -> ScrnLayout XXXX
    -> Field group rules
    Here, you will find whether column 'Class' is activated -> it should be activated
    Hope it helps
    Zub

  • Page break for a group and sub group based on page length

    Hi
    I have a requirement where in I need to develop a report which has the following requirement. I am attaching the sample xml and rtf files for reference:
    1) There are 3 groups in the Data Model. G1, G2 and G3. G1 contains G2 and G2 contains G3. I need to display that data in that order in the rtf template. Pretty straight forward.
    2) The tricky part, however, is that the report needs to have a page break on the following conditions:
        a) When the value of col1 changes which is in G1
        b) On col3 (in G2), but only when there is not enough space on the page to accommodate the values present in G3, ie col5 and col6 alongwith the values in G2. This means when the value of col3, which is present in G2, changes and if there is not enough space to accommodate G2 and G3 on the same page, it should break and start on a new page. The table which should come together is marked in grey color in the RTF template.
    What I have done till now to achieve this?
    I have created a parent table with two rows. In the second row I have made sure that the row doesn't break across pages. This is true for all the subsequent tables in the report. Now, in that second row, I have col1 in a nested table within a repeating group G1. Inside G1 there is a nested table for G2 and within G2 I have another table for the group G3. The row is not breaking across pages for all the tables that have been created.
    I have tried all the permutations and combinations of nested tables, keeping G1, G2 and G3 in the same table but different rows, having G1 in one table and nesting G2 and G3 in another, keeping G2 and G3 in a separate table altogether, Keeping G1, G2 and G3 all of them in the separate table. All of them are apparently not working.
    Is there anyway where we can either get hold of the current position of the cursor and the total number of rows on that page? Or any other solution that is possible? Or if I can have to make changes in the data model?
    Thanks a lot in advance
    Sid

    Hello Sid,
    I have checked your report and XML Sample and you haven't linked the fields from XML Sample to your .rtf report.
    You can use <?for-each?> syntax for your groups to print the content.
    I recommend you to review our "Creating RTF templates" manual:
    http://docs.oracle.com/cd/E28280_01/bi.1111/e22254/create_rtf_tmpl.htm#BIPRD2354
    Regards,
    Liviu

  • Crystal Report Group section in new page

    Hi all,
    I have a program written in VB.Net 2005 which display a report. In this report, I have a group by Item type ascending.
    When I run the program and load the report, it display the data correctly.
    When I move my mouse cursor on Group Section Hearder on the report, it will change to Magnify icon.
    When I double click on that Group title which is "Item Type" in my report, it will load a new page beside "Main Report" in Crystal tool bar.
    Problem is it didn't contain Report Header/Footer or Page Header/Footer.
    I like this feature but it only display the group section is not enough for me.
    Why I like it is because my report will have different Item Type. Each type can list up to more than 1 page.
    I want to print the report by Item Type. That means Item A may be total 2 pages, Item B may be total 6 pages.
    All I need to do is load the page like I mention above, it will only contain that Item Type and click on Print to print out particular Item type.
    Another issue is If i supress this Group Section in crystal report during design, when I run the program I can't double click to open up new page beside Main report.
    Any idea and solution for my case????
    Thanks.
    Edited by: scsfdev on Mar 4, 2010 9:34 AM

    Your report will need re-designing. What you are seeing is an expected behavior. Consider redesigning your report - possibly using subreports.
    If i supress this Group Section in crystal report during design, when I run the program I can't double click
    - again, an expected behavior. You suppressed the GroupSection. E.g.; you made it invisible / non functional / not needed by suppressing it...
    Ludek

  • Error while creating Materialized View step 3 of 6 using wizard

    have oracle 9i Rel 1 on Windows 2000 server. Master Site has been setup. Database links are created at Materialized view site. But while creating Materialized View Group using wizard there is following error on step 3 of 6.
    Statement:----------------
    /*OracleOEM*/ SELECT 1 FROM SYS.dba_constraints@masterdbname WHERE OWNER='username' and table_name='tabname' AND constraint_type='P'
    Stack Trace:----------------
    ORA-00942: table or view does not exist.
    ORA-02063: preceding line from masterdbname.
    All parameters for replication are correct.
    Please help me early.
    Thanks

    Hello,
    In the masterdbname, logging as sys user, you must grant select permission on sys.dba_constraints view to mvadmin_dbname user (where dbname is the replicated database name).
    Regards,

  • Having trouble connecting column to column using niSwitch on a PXI 2530

    Having trouble connecting column to column using niSwitch vi on a PXI 2530 matrix module.  I have configured my switch using Switch Executive, have identified aliases, and verified routes and route groups.  When I use LabVIEW to connect column to column I get an error reading "cannot find connection between c0 and c1".  c0 and c1 are example columns I want to connect.  Any help is appreciated.

    You can find NISE VIs in the function pallete in LV if you have installed LabVIEW support when you installed NISE (this is selected by default in the installer if you had LV installed before installing NISE).
    Also, choose between niSwitch and NISE based on your need - if all you ever do is connect two channels in your application, then configuring a NISE virtual device is probably an overkill (and so is using a switch in this case:-) . However, if you are going to manage multiple routes, then using NISE configuration will let you create named routes and route groups, which you can then invoke (connect/disconnect) in your application and have the configuration part managed outside your application. The code would then concentrate solely on establishing a necessary connection(s) via connecting a route or a route group, while if you were to use niSwitch for this purpose, you would have to keep the logic of connecting inside your application, together with the list of channels that need to be connected.
    Start with using NISE, and see if you like it.
    http://www.ni.com/pdf/products/us/3msw112-113.pdf
    Srdan Zirojevic

Maybe you are looking for