Group Description in Drill down and grouping on field

I want to put a formula field for grouping, but I want to display some text(description) in group drill down.
My group field is numeric and I want to display text on right side of drill down report.

Hi Seema,
In order to display a different group name you may try the below steps:
-  Right click on the group and click on change Group option and then click on Options taband then check the box which says 'Customize Group Name Field'.
- Now either 'choose from existing field' or 'use a formula as group name' to display the group description.
This would help you to display the appropriate description for that field.
Regards,
Komal Prasad

Similar Messages

  • Disable Drill Down For Groups only except SubReport

    <p> </p><p>Hi All,</p><p>I have 10 subreports and also 5 Groups sections in one report (version CR 10 - VS.Net 2005)   </p><p>I need to disable drill down on Groups <strong>except SubReport </strong>. </p><p> </p><p>Thanks in advance for any solution </p><p> </p><p>-Harini </p>

    Where are the subreports located? You mention you have 10 subreports and also 5 group sections. Are the subreports located in the page or report header/footer sections? Are there detail records in the groups? If not, then you don't need to supress drill-down, there is nothing to drill to. If there is, suppress the detail section. If a user drills on the groups, there will be no detailed information visible.
    Typically, if you have multiple groups and want to supress drill-down but still display the first group, you can use the 'drilldowngrouplevel >1' statement in the section expert to conditionally suppress the group. Right click the group, select 'Section expert', and click the formula button (the button with the 'X-2' and a little pencil) next to 'Suppress (No Drill-Down) Then, enter drilldowngrouplevel >1. This should do the trick if you have your report structured this way. If not, please provide a little more detail.
    Thanks and good luck.

  • Disable orange highlighting when drilling down by group

    Hey All,
    I am having an issue with a report that I am trying to publish (I did not design the report but need to get it fit for publication on our ERP). The report drills down by group (ie, company overall > department > employee) and for every drill down beyond the 'company overall', my group headers have an ugly and obtrusive orange highlighting that fills the entire text box (so that, say, the Human Resources page has the title, Human Resources, in a big orange box). It makes no difference if I manually set the color of the text box to white. Also, I have tried to manipulate through formulas the {@Department} (or {@Employee}) tag to no avail.
    Terribly frustrating. Any hints? Is there something simple I am overlooking?
    Thanks!

    Hi.......
    Welcome to SAP Business One Forum...........
    Can you please paste your query here so that I can help you possibly?
    Regards,
    Rahul

  • How to remove the sort function on the drill down and then save

    how to remove the sort function on the drill down and then save in the  change local view of the Query
    Is it possible to change the porperties of any characteristic in the local view and then save?
    If so please post the answer.

    I do not think that option is possible.
    Regards,
    Venkata Boga.

  • Drill Down and Drill UP on Web Analysis Report

    Hi all,
    I have a question regarding Drill down and Drill up on Web Analysis Report.
    The situation is the following:
    I've created a report with some account parent elements in row. The dimension account has a multiple hierarchy.
    I need to drill down on the child of these elements keeping the parente on top and so i've selected the option "Selected Member First".
    The drill down it's ok for the first drill to go on the next level but when i drill down once more to go on the next level of the selected member hierarchy the drill move this level out hierarchy.
    Can someone help me on this point?
    After that i've drilled just to the last level when i drill up on these elements to return on the previous level i note that in the report happens a strange thing:
    The Drill Up works fine but on the report appears another elements which is the same parent with anothe code/alias of another hierarchy instead of the Selected member.
    On this i've noted tha this 2 different parente have the same elements...I think that the children of the selected memeber can be shared members....Can be this the problem?
    Thanks for the help.
    Best Regards
    Eugenio Gualtieri

    Hi John,
    thanks for your answer.
    I've trayed to set the report on Smart View to virify tou test your advise.
    The situatio is the following:
    IS05101010-PUBBLICITA'
    702000 - VEND. DI SPAZIO PUBBLICITARIO
    702010 - RETTIFICHE VENDITE SPAZIO PUBBLICITARIO     
    W10004 - RICAVI PUBBL ICITA' ATTIVA (Q.EDIT) INTE     
    W10007 - RICAVI DA SPAZIO PUBBL. INTERASA     
    W10029 - RETTIFICA RICAVI PUBBL. INTERASA     
    ED05101010-PUBBLICITA'
    702000 - VEND. DI SPAZIO PUBBLICITARIO
    702010 - RETTIFICHE VENDITE SPAZIO PUBBLICITARIO     
    W10004 - RICAVI PUBBL ICITA' ATTIVA (Q.EDIT) INTE     
    W10007 - RICAVI DA SPAZIO PUBBL. INTERASA     
    W10029 - RETTIFICA RICAVI PUBBL. INTERASA     
    If I take only one parent member the drill up works fine but if i take all 2 memeber as above and i decide to drill up on one of the two element occur that the drill work for the two elements at the same time.
    Afetr the drill in this case the situation is:
    IS05101010-PUBBLICITA'
    ED05101010-PUBBLICITA'
    Can be a problem due to shared memebers?
    Thanks for your help.
    Regards
    Eugenio Gualtieri

  • Difference between drill down and filter using navigation attributes?

    hi all,
    can anyone let me know the difference between filter and drilldown options using navigational attributes. pls explain with examples for filter and drill down and how it varies.
    thanxs
    haritha

    Jst to add up with an example :
    Say you have a cost center variance analysis report with cost elements in the filter. ( not present in the default report result )
    Filter - You can right click on a particular cost center & say " Keep Filter Value " - it will result in only showing that cost center & you can wish to select other filter value doing " Select Filter Value ".
    Drill Down - If u wish to see the cost elements associated with cost centers you can right click on Cost Center & do " Drill Down To - Cost Element " or Drill Across.

  • Drill down and Drill up

    hi,
      I need to explain to a team, how drill down works. I mean, what are all the properties that I should set for an infoobject to do drill down and drill up on it.
      also, the purpose of hierarchies is drill down? I didnt understand.
    thanks.

    The drilldown and drillup feature is set and achieved in the report by designing in the query designer.
    In the Query Designer if you push a characteristic in "Free Characteristic" then details for this characteristic won't appear in the report.To see the details for these characteristic you have to drill down the original report.
    For Example you have 2 characteristic 0CUSTOMER,0CALDAY and you are displaying KFs "No of Orders" and "Order Value".
    Now if you have both characteristic in the ROWS section in the query designer the report will show Customerwise Daywise Total Order and Sum of Order values.
    Push the 0CALDAY to Free Characteristic.Now you will see only Customer wise No of orders and Value.Right Click you will find an option to drilldown to 0CALDAY and when you select you will be able to see Customerwise Daywise details.
    Hierarchies by default shows the first node and you can drill down to its children.
    Navigational Attribute behaves as a characteristic in the infocube with which you will be able to restriction as well as drill down/up.
    Regs
    Gopi
    Assign points if it helps ....
    Message was edited by: Gopi

  • Is it possible to implement the drill down and navigate reorts in narrative

    any body pse help me to find 'is it possible to implement the drill down and navigate reports in narrative view'

    Hi user12255470,
    Go URLs are a way to directly call an Answer Request or Dashboard Page via a URL. In addition, you can even pass parameters in the URL as filters. GO URLs are used will you want to allow a user to drill into detail by clicking on a static text. It also allows other tools to drill into OBIEE.
    Here's an example GO URL: http://LOCALHOST:9704/analytics/saw.dll?Go&Path=/users/administrator/OTN Tests/Page Test&Style=oracle10&Format=PDF
    I'll break down each piece
    LOCALHOST: This is the URL for your OBIEE web host
    :9704: This is the typical port for OBIEE installs (sometimes 7777)
    ?Go: This is where the it's gets the name "GO URL". It's the GO command.
    &Path= : This is the full path of the report. In my case, it's in the administrator folder in a sub folder called OTN Test. The report itself is called Page Test.
    &Style=: This sets the style, or the look and feel, on how the report is presented. The default is oracle10.
    &Format=: You can set this to default the presentation. I set it to PDf so that a PDF will generated.
    Good luck and if you found this post useful, please award points!
    Best regards!
    -Joe

  • Group Charts in drill down

    Post Author: deltaXI
    CA Forum: General Feedback
    Hi i am pretty new in CR. I have a report which is grouped in 5 levels. ie.when we view the report we get the higher level view then you have to drill down to each of the levels. the grouping and drill down is working perfectly.I need to insert charts in the drilled down pages. but wherever i insert the charts &#91;i tried putting it in group headers and footers&#93; it gets shown on the very first page of the report  without drilling down. I want it to be shown only when drilled down Please helpThanks in advance 

    Hi Ricky.....
    Chart waise Graphical Representation is given by SAP and it can be easily done in XCelcius.
    All you need to do is you have to create your own report and put this report in XCelcius.
    It is recently launched.....
    Regards,
    Rahul

  • IDA ALV - different behavior regarding "drill-down" for grouped attributes after upgrade to ERP 6.0 EHP7 SPS5

    Hello Experts,
    we have  upgraded our Dev System to ERP 6.0 EHP 7 SPS5 (coming from SPS4).
    We had implement an example with an IDA ALV. On SPS4 we could make a "drill-down" to the single lines of grouped attributes. Now with SPS5 this is not possible anymore if the grouping is done for more than one attribute.
    On the following screenshot it scan be seen that the grouping is done over a Peril attribute and the Currency. I can only make a drill-down via the peril attribute, so that the aggregated values per currency are displayed. ON SPS4 it was possible to make a further drill-down for the currency attribute, so that the different single lines were visible which were part of the grouping/aggregation.
    SPS5 behavior:
    SPS4 behavior:
    I did not found any new settings which steers the behavior. Also I did not found any note which gives a hint that this is a bug.
    Does anyone know if the behavior for that was changed and why?
    Thx & Best regards,
    Florian

    Hi Florian,
    it is related with the currency field and it seems to be a bug. Please open a ticket to get the problem fixed. The component is BC-WD-CMP-ALV.
    Cheers
    Jens

  • Web Intelligate Summer Report drill down and drill up problem

    I use summary table and @aggreage_aware function to design a universy.  I want WI report shows highest level summary table data first, then drill down to next high summary table data.  But when I drill up back,  it still shows be next high summary table data.  I don't use the report to do any calculations.  I just want it shows different level data.
    Detail:
    I have three tables:
    1.  Month_Data table:  - Base fact data table.
    Year
    Quarter
    Month
    Department ID
    Supplier ID
    Score          -- Measure type
    2.  Quarter_Data table: - High level summary table.
    Year
    Quarter
    Department ID
    Supplier ID
    Score          -- Measure type
    3.  Year_Data table:  - Highest level summary table.
    Year
    Department ID
    Supplier ID
    Score          -- Measure type
    I like to create a web intelligence report that shows data from year_data table:
    Year          Score
    2008          105
    2007          99
    2006          90
    If I drill one level down, It will show data from quarter_data table:
    Year (example 2007)
    Quarter1     Score
    Quarter2     Score
    Quarter3     Score
    Quarter4     Score
    If two level drill down, it will show data from month_data table:
    Quarter1
         Month1          Score
         Month2          Score
         u2026
         Month12                     Score.
    No calculation needed on the report.
    I will use follow steps to create a universe:
    1.  Three tables will be three classes.  The classes order is:
         Year_Data class;  Quarter_Data class; Month_Data class.
    2.  When I create universe, I join:
    Year_Data  class to   Quarter_data class:
    Year to year                 1 to n               
    Department ID to Department ID          1 to n
    Supplier ID to Supplier ID          1 to n
    Quarter_Data class to Month_Data class:
    Year to Year               1 to n
    Quarter to quarter               1 to n
    Department ID to Department ID          1 to n
    Supplier ID to Supplier ID          1 to n
    3.  Create a filter class with object Department ID and supplier ID.
    4.  I create two aggregate aware classes:
    Agg_dimension class:
         Year:    aggregate_aware(year_data.year, quarter_data.year, month_data.year)
         quarter: aggregate_aware(quarter_data.quarter, month_data.quarter)
         Month:     aggregate_aware(month_data.month); 
    Agg_Measure class:
         Score: aggregate_aware(year_data.score, quarter_data.score, month_data.score)
    5.  I may re-define year, quarter, month and score as aggregate_aware function for objects in all classes:
         Year:     aggregate_aware(year_data.year, quarter_data.year, month_data.year)
         quarter: aggregate_aware(quarter_data.quarter, month_data.quarter)
         Month:     aggregate_aware(month_data.month); 
         Score:   aggregate_aware(year_data.score, quarter_data.score, month_data.score)
    6.  create user hierarchies: 
    agg_dimension.Year
    agg_dimension.quarter
    agg_dimension.month 
    7.  Figure out Aggregate Navigation  -- it is easy.
    Then create a report.  I put follow objects on report:
    Agg_dimension.year          agg_measure.score
    When I run report, it shows right data:
    Year_data.year          Year_data.score
    On the report. I drill down on year, it shows right data.
    Quarter_data.Year:
    Quarter_data.quarter1                quarter_data.score
    Quarter_data.quarter2                quarter_data.score
    Quarter_data.quarter3                quarter_data.score
    Quarter_data.quarter4                quarter_data.score
    But when drill it up back on quarter, it shows:
    Quarter_data.year     quarter_data.score1
    Quarter_data.year     quarter_data.score2
    Quarter_data.year     quarter_data.score3
    Quarter_data.year     quarter_data.score4
    Not
    Agg_data.year          agg_data.score.
    It has drill up back problem on my report.
    Please help.
    Thanks
    Frank Han

    and keyfigures are coming frm 2lis_03_bf..But when i drill down on purchase organization, purchase grou , vwndor account group and planning group then # is coming instead of value....i dont the reason for this..
    Did you chk if you have vendor, purchase org, all this coming from 2LIS_03_BF??
    Can you chk in listcube transaction what is the output by putting the same restrictions as in the query?
    Edited by: mansi dandavate on Jul 10, 2009 11:37 AM

  • Unable to populate the G/L account text ( description ) in drill down repor

    Hi
    We have developed the trial balance drill down report from FAGLFLEXT table under 0FL library for company code wise.
    The charecters are period,fiscal year  & Version and the key figures are HSL ( GLT0 table ).
    We are getting only the GL account number in the row ( actual requirement is we need to get the g/l account number and text beside of number ) . Please suggest.
    Regards
    Venkat

    Hi
    Thanks for the reply, this we have already tried. We are preparing the report for the trial balance which consists of the Balance sheet accounts & Profit and loss accounts. The total number of G/L accounts is more than 500. Here under the Charecteristic values we are giving the account number range . We dont want to manually enter the description for all the G/L accounts. The report should automatically populate the G/L account description ( text ) from the range of the G/L accounts such as 10000000-30000000 etc.
    Regards
    Venkat

  • How to drill down and keep all my pivot table...

    Hello experts!
    I have a question about how to drill-down in pivot table. If I drill-down I can see the result in the same place...but it dissapear other bins or measures...
    Example:
    Pivot table:
    A
    B
    C
    If I click in A I can see:
    a1
    a2
    a3
    But I don't see B and C.
    I would like to see when I click on A:
    A
    ---a1
    ---a2
    ---a3
    B
    C
    In my example I have a lot of bins to do drill-down...so it doesn't work for me to create three pivot tables and to do a union...
    Is that possible? If you need more details you can post here...
    Thank you!

    Alex, this isn't another question. It looked like you were asking something different. That's why I said to start another thread. The bottom line is that OBIEE can't do what you are looking for.
    But I think what is more important is not necessarily how to do what the OP wants, but what is the best way (read: most efficient, simplest, viable) to achieve the goal.
    In this case, I think a better approach to your reporting is to use to Dashboard prompts. The first would be like Vehices (which has Cars, Trucks, Motorcycles, etc. in the drop-down window) and the second, constrained on the first, called Models/Brands (which has values dependent on what is chosen in the first prompt). With "All Choices" checked off in the prompt design, you have all the combinations a user needs to see in the pivot table. If the user chooses "Cars" from the first prompt, and "All Choices" in the second, then he/she will get all the car models displayed in the pivot table. Or, the user could select one particular moded from the start.
    In fact, this is how many product web sites are set up. This gives the flexibility to the user and the report looks clean and efficient. You can have the drill down on the particular model (value interaction) if you wish to supply extra data on the particular model chosen.
    I think this is the "correct" answer, Alex, though not the answer to the question you posed. Good luck.

  • Drill Down and customer Exit variable

    Hello together and A Happy New Year!
    Please help me with the following topic:
    I have a query with 4 selections(fields) in the columns.
    In the first selection (F1) I have resctricion to Posting Period via Period to (a user entry variable).
    In F2 I have restriction to Posting Period via Period to cust (customer exit based on value of V1 - introduced by the user)
    In F3 I have restriction to PP via Period from, Period to (between: user entry variables)
    In F4 restriction to PP fia Period from cust, Period to cust (between: customer exit variables)
    In the query, if I select in the selection screen Period from 1 and Period to 3, for example, when I make the drill down, only  3 (Period to) is displayed instead of 1, 2 and 3.
    If in the query designer I remove from the columns F1 and F2, then the drill down is working properly (having intervals in the other fields: F3 and F4).
    Do you have any idea why drill down is not working properly with all 4 fields in the columns?
    Thank you,
    Iuliana

    Hello,
    Is there anyone who could help me?
    Thank you,
    Iuliana

  • Drill-down and how to change to the correct value in the dashboard title

    Good Morning,
    I have a problem on the presentational side, which some of you might have seen as well.
    My dashboard page looks like this:
    Dummy Prompt 1: YearFrom
    Dummy Prompt 2: YearTo
    Prompt 3: Item
    All three prompts have a presentation variable to show their respective value in the title of the dashboard page.
    Below the prompts is the report, which is filtered by the three prompts and contains a column "year" with the option to drill-down.
    When I drill-down on a "year" value, a column "month" appears and shows the values of the year by month.
    Problem : After the drill-down the title still displays the old "YearFrom" "YearTo" values and not the year I drilled-down on
    Question: How to I change the title to the correct year?
    Optional: In the drilled-down report I would like to hide the column "year".
    Every idea is appreciated
    Turalf

    hi, with JSF 2 you got the ajax tag, just tried it and it works fine :)
    <h:inputText id="myinput" value="#{back.name}">
        <f:ajax execute="@this" event="keyup" render="outtext"/>
    </h:inputText>
    <h:outputText id="outtext" value="#{back.name}"/>or before JSF 2
    <h:outputScript name="jsf.js" library="javax.faces" target="head"/>
    <h:inputText id="myinput" value="#{back.name}" onkeyup="jsf.ajax.request(this, event, {render: 'outtext'}); return false;"/>
    <h:outputText id="outtext" value="#{back.name}"/>The name property is a simple String in the bean.
    Hope this helps
    Edited by: hereps on Aug 21, 2010 7:18 AM

Maybe you are looking for