Group Left

In my Report
Engine Trans MWC HFC
Tested 2.2v x.5 3.8 4.5
2.7v x.6 3.7 5.5
Toatl 7.5 10
Untested 2.2v x.5 4.5 6.5
2.7v x.7 3.5 3.5
total 9.0 10.0
How to do this kind of Group reports
Thanks
In Advance
Sankuratri

See the link:
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_concepts1.htm#sthref42
Hope this helps.

Similar Messages

Group Left report: problem in order the columns

Hi,
I have a Group Left report in report6i with group A and Group B. Group A has columns AAA, BBB, CCC, DDD, EEE, FFF and Group B has coulmn YYY, ZZZ.
The problem is report does not take order by clause. It sort the report by first column of Group A, does not reflect my order by clause.
I created laxical variable in order to change order by clause dynamically.
Any suggestion?
Thanks in advance
Dip

Hi,
I have a Group Left report in report6i with group A and Group B. Group A has columns AAA, BBB, CCC, DDD, EEE, FFF and Group B has coulmn YYY, ZZZ.
The problem is report does not take order by clause. It sort the report by first column of Group A, does not reflect my order by clause.
I created laxical variable in order to change order by clause dynamically.
Any suggestion?
Thanks in advance
Dip

Group left and group above

I am trying to do a group left within or below a group above, like so.
Name John Doe
Incident Activity
12345 Apply
Accept
Modify
12346 Apply
Accept
Modify
Name Bill Smith
Incident Activity
12347 Apply
Accept
Modify
12348 Apply
Accept
Modify
I can't figure out how to specify different types of grouping for different groups.
Any suggestions?
null

Make a group above report for the first 2 groups. in the Data model extend the detail's repeating enclosing frame.
Inside this frame draw an additional default layout (a button in the Layout Editor on the left toolbar) and inside this one insert your detail group.
Or... you can create an above group without any break first, then separate a group in the Data Model and add a repeating frame around the detail columns. Specifi as source of this frame the name of the detail group from the Data Model.

Converting a Group Left to a Group Above Report

I have created a dozen group left reports which I thought would only take up one page of data. I have found that some of them will actually require more pages but the report will only produce 1 page.
As an example I created the same report but used the group above style and this time by default it creates multiple pages. So how can I change my other reports into the group above style - note I cannot use the wizard as I have made many layout changes which woujld be lost.

It's not because of Group Left vs Group Above that report display only the first page. Make sure the Print Object On property of the repeation frames set to First Page Only, not All Pages.

Problem in creating group above AND group left in one report!

Hi all,
I need a report that is a combination of group above and group
left.
Suppose I have 3 table (Emp, Sales, Product):
Emp Table has 2 column
- Emp_PK
- Emp_Name
Sales Table has 4 column
-Sales_PK
-Sales_Date
-Emp_FK
-Produck_FK
-Quantity
Product Table has 3 column
-Product_PK
-Product_Name
-Product_Price
I want to make Employee Sales Report For The Month that will
look like this:
Emp Number___: Emp_PK
Emp Name_____: Emp_Name
Sales Date______Product_Name____Quantity \(2 sales
________________Product_Name____Quantity /the date)
Sales_Date______Product_Name____Quantity
As you can see this consist of group above (The Employee) and
group left (The Sales and Product).
I create this by using 2 queries and link them (the Emp_PK from
1st query and Emp_FK from 2nd query) on the report builder using
data link.
The first query is:
Select Emp_PK, Emp_Name from Emp
The second query is
Select Emp_FK, Sales_Date, Product_Name, Quantity
From Sales, Product
Where Product_PK=PRODUCT_FK
I then create the layout for second query and choose group left
for Sales_Date using wizard and I create additional layout to
for the employee.
The problem is that when I run this report, it will print ALL
the employee record first (including employee who has NOT sale
anything) and then on the last page it will print the record of
Last employee on the Emp table and ALL sales record (including
those that is done by other employee).
This report will run correctly if I choose an exact employee
(For example by adding Where Emp_PK=1111 in the first query) to
report all of the sales done by this person (employee with emp
number of 1111). However I need the report to run and print
ONLY those employee who has Sales Records!
I thought that by linking the 2 queries in Data Model, it will
have the same effect as linking using the WHERE clause in query.
If suppose I create a query like this:
SELECT Emp_PK, Emp_Name, Sales_Date, Product_Name, Quantity
FROM Emp, Sales, Product
WHERE Emp_PK=Emp_FK AND Product_PK=Product_FK
The report will run OK but I can only choose EITHER group above
or group left for this ONE query methods in report Wizard.
Sorry if it is a long question but I hope you can see what I am
trying to do.
Thanks in advance for any tip.

hello,
of course you can create group left and group above blocks in a
single report.
you might want to use the INSERT REPORT BLOCK instead of the
report wizard, as the report wizard only allows you to use one
report layout per report, where the report block wizard (invoked
by INSERT REPORT BLOCK) allows you to choose on a per-block
basis.
of course you can create the blocks completely from scarth by
hand, if you want to.
regards,
the oracle reports team --pw

How to design Group Left Report using RTF method ( XML Publisher )

Hi,
I need to design Group Left Report using basic RTF method. I am able to design basic simple report and Group Above Report but I am not getting Group Left Report. Can anyone help me out.
Thx N Regs,
Khan.

Group Left report can be done using table consisting of 1 row and 2 columns. Group header goes to the column 1, group details go to the second column. Group details can be also designed using table, in this case you get table within table cell. "for-each.." statement for the upper level group to be placed in the left column before the group header data. "end for-each.." to be placed in the second column after the detail data.

Need help in group left report

i need help in group left report
i am making group left report in which all group data on top is repeating as many time as detail record is .
for axampel
if
group record:
fielda fieldb field c
fielda fieldb field c
fielda fieldb field c
fielda fieldb field c
detail record :
fieldd fielde feildf
fieldd fielde feild
fieldd fielde feild
fieldd fielde feildf
how i can show group record on top once and on each group record show detail record belong to master record.
plz help me
A.R

I think you Should go for Group above report...
and if you want group left only and also want to display master once then
put all master fields above but yeah take care of it's master repeting frame
it should not change...
and if you want i can send you an example...
Enjoy Oracle...

How to build a Matrix with Group Left Report

I want to build a Matrix with Group Left Report,not Matrix with Group Above Report,i am still finding the solution, any help is useful.
thanks
<[email protected]>

Hi,
The problem in your output is not clear. The report output should appear like:
Order Mode.....Sales_Rep_ID > 10..11..12..
Online.........Order Status
...............A..............x....x...x
...............B..............x....x...x
...............C..............x....x...x
Order Mode.....Sales_Rep_ID > 10..11..12..
Retail.........Order Status
...............A..............x....x...x
...............B..............x....x...x
...............C..............x....x...x
Here "Order Mode" is the group field (it repeats for every group). Could you pl specify what output you are getting?
If the problem is that you don't want the Title (like "Order Mode" in the above example) to print in every group, just place it outside the group repeating frame. It will print only once.
Navneet.

How to Group left + group above

I am new to oracle report. Hope to get clear steps thx.
I have 7 columns in my report. 3 columns using group-left and i want to use another 1 column for group above.
How do i create group above for the column i want ?

It is not clear to me how your report layout will be looking at runtime. Can you provide any output example.
Always use the 6 digit before and after your example. Only small letters inside the curly brackets. For more information see FAQ right corner of the page.
-Ammad

Group Left Order By

Hi,
I have a sql which contains an order by clause (order by field1, field2), the query runs fine in SQL*Plus.
I tried to create a Group Left report in Reports 10g. (The report contains the Group on field1.) When I run the report, it disregards the order by clause. Is there some place else I need to look at?
The report works fine if I I picked tabular, but then field1 repeats itself: i.e.
Human Resources John Smith
Human Resources Jane Doe
If there is a way to suppress the repeating value, then I could use tabular format.
Thanks in advance
VC

Figured it out.

Group Left Rpt - Dept Subtotal - S

Have a Group Left Report - Have it set up with the Following
Mgr Grp -
Mgr
Emp
SumofXYZ
Sumof123
Sumofabc,
Sumofdfe,
Date Grp -
Date,
XYZ,
123,
ABC
The report is set to Group on Mgr and Emp with Totals at Emp level, then a REPORT total generates at end of reprot ...The need I have is to be able to generate a Subtotal when the Mgr VALUE changes with the totals summing up all the EMP totals under that Mgr VALUE...have tried a few approaches ...any help would be greatly appreciated!!

In the date model drag the column above all column on which you want to make a sub total on

Help with Group Left Report

Hi everyone,
I created a Group left report with 4 grouping columns.Everthing is working fine but i am getting some problem with the order of the 3rd column(varchar).It is doing ascending order(As the Break order Propoerty of that column is ascending).
But i am trying to do is the 3 rd column needs to be displayed by a specific (order by clause)
But in group left report it is not considering the (order by clause of the query).It is doing sort by the grouping columns.Is there any way that i can sort a grouping column(other than asc and dsc).It needs to be displayed in the order of another column.
Thanks
phani

Create another column (either in the query, or in the data model as formula) that would indicated the rank according to the desired sort order. You don't need to place the column into the layout, but use it to set the break order in the data model.

Group Left report does not sort DESCending

Hello seniors...
i have the following query that produces result as desired below at SQL level; i am aiming at rows to be displyed in the DESCending order..
SQL> SELECT Z.ACATG_TYPE, Y.EXPN_CATG, z.ACATG_DESC, y.expn_code, y.expn_name,
2 DECODE(Z.ACATG_TYPE,'I', x.closing) Income,
3 DECODE(Z.ACATG_TYPE,'E', x.closing) Expense
4 FROM(
5 SELECT PSN_PARTY, expn_name, SUM(nvl(NETT,0)) nett, SUM(nvl(DEBIT,0)) debit, SUM(nvl(CREDIT,0
)) credit,
6 SUM((nvl(NETT,0)+nvl(DEBIT,0)-nvl(CREDIT,0))) CLOSING
7 FROM (
8 SELECT PSN_PARTY, 0 nett, SUM(nvl(debit,0)) DEBIT, SUM(nvl(CREDIT,0)) CREDIT
9 FROM(
10   SELECT PSN_TXN_DATE,PSN_PARTY, nvl(DEBIT,0) debit, nvl(CREDIT,0) credit
11   FROM
12       (
94 where PSN_PARTY = expn_code
95 GROUP BY PSN_PARTY, expn_name) x, expense_master y, Accounts_category z
96 where x.psn_party = y.expn_code
97 and   y.expn_catg = z.acatg_code
98 and   z.acatg_type in ('I','E')
99 ORDER BY Z.ACATG_TYPE DESC, Y.EXPN_CATG,y.expn_code;
ACA EXPN_C ACATG_DESC                     EXPN_C EXPN_NAME                             INCOME       EXPENSE
I   90     Income                         AC2000 Sale                                1333.000
E   10     Expense                        AC0003 ELECTRICIRTY BILL                                   30.000
E   10     Expense                        AC0005 TELEPHONE BILL                                      16.000
E   10     Expense                        AC0007 TEA & SNACKS                                        17.000
E   10     Expense                        AC0009 REPAIRS & MAINTENANCE                               15.000
E   10     Expense                        AC0010 MOBILE BILL                                         45.000
E   10     Expense                        AC0011 REFUND                                             220.000
E   10     Expense                        AC0019 OFFICE EXPENCE                                      15.000
E   40     Staff Salaries                 AC0006 STAFF SLALARY                                      250.000
9 rows selected.But when i made use of the above query in my report with Group Left Option, i dont get it sorted in DESCending order.
With Tabular type report it sorts correctly as above.
The screen schot for better idea of my report is attached for the reference.
[http://i995.photobucket.com/albums/af71/rhnshk/INCEXP.jpg|Report-Preview]
[http://i995.photobucket.com/albums/af71/rhnshk/INCEXP1.jpg|ReportWizard-DataModel]
[http://i995.photobucket.com/albums/af71/rhnshk/INCEXP2.jpg|ReportWizard-Groups]
[http://i995.photobucket.com/albums/af71/rhnshk/INCEXP3.jpg|ReportWizard-Fields]
[http://i995.photobucket.com/albums/af71/rhnshk/INCEXP4.jpg|ReportWizard-Totals]
i want the rows with acatg_type = 'I' to be displayed first.
Sorry for not attaching the complete SQL, but no issues if at all required, i can do that as well.
Since its a long in-line view created SQL. thought the solution might come out showing this much part only.
i am using Report 6i on 10g.
Please help me.

Thanks Arif,,
Grouping/Break i need to be done with EXPN_CATG-within-ACATG_TYPE.
if you can view the my report image links, u'll understand much better.
EXPN_CODE is not part of the Group Fields.
Still i tried re-arranging Group fields, but still the same..
Row with ACATG_TYPE = 'I' is not moving up.
Please suggest..

Group Left report

Helo all,
Iam trying to create a group left report (Time report)
I need something like this
code Client_name county Average1
02 Elias Mulain Central Cf_1/Count North Cf_1/Count
South Cf_1/Count
SouthWest Cf_1/Count
Cf_1= (staff_date-access_date)
Count= Count(county)
my query is
select code,Client_name,county
staff_date,access_date,hire_date
from t1,t2,t
as I selected code,Client_name,county in the group
I selected one of the date columns and I made it invisible so that it doesn't display in the report. it prints lot of spaces for ex
02 Elias Mulain Central
North Cf_1/Count
South Cf_1/Count
SouthWest Cf_1/Count
How do I get rid of this space.
I tried creating 2 queries in datamodel one query for the group colums and other for the dates.
But I am getting a "refrence col below frequncy...." error when I am trying to refer them for the calculations
Please help me

This was filed as a bug in Oracle Reports (May 15th 2003).

Order by group left report

Hi,
I have a sql which contains an order by clause (order by field1, field2), the query runs fine in SQL*Plus.
I tried to create a Group Left report in Reports 10g. When I run the report, it disregards the order by clause.
The report works fine if I picked tabular.
Thanks in advance
Tushar

Let us take an example of a table with the following structure -
create table test (grade varchar2(3),
detail varchar2(10));
Here GRADE is the column which contains numbers as well as alphabets or
alpha-numerals.
A normal query on the table would result in the following -
select grade, detail from test
GRADE DETAIL
1 DET1
1 DET2
1 DET3
1 DET4
2 DET1
2 DET2
2 DET3
5 DET1
A DET1
A DET2
B DET1
B DET2
B DET3
B DET4
10 DET1
10 DET2
10 DET3
If you want the GRADE to be sorted in a numeric order first and then alphabetically,
you can use the concept explained .
select grade, detail
from test
order by decode( TO_CHAR(NVL(LENGTH(TRANSLATE(grade,'A1234567890','A')),0)),
'0',LPAD(grade,8),
grade)
GRADE DETAIL
1 DET1
1 DET2
1 DET3
1 DET4
2 DET1
2 DET2
2 DET3
5 DET1
10 DET1
10 DET3
10 DET2
A DET1
A DET2
B DET1
B DET2
B DET3
B DET4
If you were to write the above query in Oracle Reports (tabular style),
the output would be the same as above.
But if you create a group left or group above style with GRADE as the
higher group, the same query would give the following result -
GRADE DETAIL
1 DET1
DET2
DET3
DET4
10 DET1
DET3
DET2
2 DET1
DET2
DET3
5 DET1
A DET1
DET2
B DET1
DET2
DET3
DET4
This is because although the server sends back the resulting set in the desired
ordered fashion, the grouping on grade does a further sort (ascending - the
default). But this sort is done alphabetically since this is a varchar2 column.
To avoid this or to achieve the desired output (numbers to appear sorted first
and then alphabets), use the decode in the select list itself.
Now the query for the report becomes -
select decode( TO_CHAR(NVL(LENGTH(TRANSLATE(grade,'A1234567890','A')),0)),
'0',LPAD(grade,8),
grade) grade
, detail
from test
The order by clause in the query is irrelevant since the grouping inside reports
anyway does the sort. The result would look like
GRADE DETAIL
1 DET1
DET2
DET3
DET4
2 DET1
DET2
DET3
5 DET1
10 DET1
DET3
DET2
A DET1
DET2
B DET1
DET2
DET3
DET4

Tape marked as offsite ready due to a single protection group left behind on tape

Hi,
we're using DPM2012, we have it on two nodes, the first backs up to disk and then offsite to the second server which goes to disk + tape.
In general tape colocation works however I have a slight issue;
At the moment we are running close to the number of tapes we actually need to backup the volume of data we back up, this means that every day I mark tapes as free using the force free tape script available on the web... This works but occasionally I notice
that the script will not quite finish - DPM will take the tape before it completes and start using it as a free tape i.e. immediately starts putting data on the tape. Normally this is okay but it occasionally leaves a single bit of data on the tape..
the backup will continue and perhaps write 100 GB for example, then all of a sudden that tape is marked as 'offsite ready' when there is clearly lots of free space on the tape.
So today for example I have about 10 different PG's on a tape, all with todays date as the backup date, expiry is plus 2 weeks. But then there is a single PG on there with a date of about 2 weeks ago which I'm assuming is what has made the tape offsite ready.
I don't really want to have to stop active backups from running to be able to mark a tape as free as a fix - anyone know of a way around this?
My second question - relating to co location again - if a backup of a PG needs to span a second tape - can it only do so on a free tape? some of our larger backups will sit and refuse to write to a tape which might (by estimation) have 500 GB free
space left on it.
Thanks
Chris

Hi,
<snip>
so I might have a tape with 500 GB free space on it sat waiting there, and the job won't utilize this tape.
>snip<
Apples and Oranges - When DPM needs a new tape for spanning purposes, it always requires a free or expired tape.
When a new backup job starts, DPM looks at all media In the library and determines what tape to write the new data set on. This is based on the settings of
the PGSet and either picks an existing tape that is still available for writing or it picks a free or expired tape.
So, in the case where a tape is only half used, review what data sets are already written (right-click, view tape contents) and the review the Write Period and Expiry Tolerance values for the protect group set used by the protection groups configured to
that that PGSet..
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Group Left

Similar Messages

Maybe you are looking for