Group Titles not working in Marker lists

Framemaker 7.2
I've created a special alphabetical list of markers, using a custom name for the marker. The list generates just fine and I have the page formated as I want, except for the need to add group titles.
I created, on the resource page, a GroupTitlesAML paragraph format. The line on the resource page looks like:
Symbols[\ ];Numerics[0];A;B;C;D;E;F;G;H;I;J;K;L;M;N;O;P;Q;R;S;T;U;V;W;X;Y;Z
But it is completely ignored.
Are group titles even available for marker index lists, or only for actual index markers? In other words, is GroupTitlesIX only available with files that have the IX suffix?
I also noticed that doing something like "<Emphasis>maker text<Default Para Font> more marker text" is ignored, in that all of the text appears in the marker list. The special text is not even parsed as special text.

Video Senior,
Michael is correct. If you want an index, then create an index of markers (IOM), NOT an alphabetical list of markers (AML). A list, being a list, does not have group titles, there being no grouping in a list. Thus, the GroupTitlesAML is meaningless for a list.
I have a user-defined marker called warning. I also create an index of my warning markers (IOM). Although I do not group them under group titles, the IOM reference page does have a GroupTitlesIOM line that basically groups them all together.
So, create an index or markers, not a list or markers.
Van

Similar Messages

IOS Group Messaging not working when Android phones are involved

Group Messaging not working for me when there are both Iphones and Androids involved. iPhones still using iOS 7 don't seem to be having problems leading me to believe this is an iOS 8 problem. Is there a workaround for this yet, or is this a legitimate bug fix that Apple will have to address?

Hey geoff_zen,
Thanks for the question. After reviewing your post, it sounds like you arr having trouble with group messages. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Messages
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

IMovie 10.0.1: Stabilization doesn't work. I have tried several times, it just grays out. Also, fonts, font size, color of title not working. What's the skinny?

IMovie 10.0.1: Stabilization doesn't work. I have tried several times, it just grays out. Also, fonts, font size, color of title not working. What's the skinny?

PROBLEM SOLVED!
I went to my device manager on my Windows 7 PC and found the Bonjour service in my Services and Applications section. I set it to manual and BANG iTunes started working like it's supposed to.
Unfortunately, I let my IPad get stolen on 17 Jan so I'll probably wait until after April to replace it with an IPAD 2!

Group chat not working on Mac

Suddenly stopped working, but personal messages works. Had to login via skype for web and that's where I saw that I had tons of group messages. Tried updating Skype to latest version (7.10), restarted several times, to no avail. Group Chat is still dead.

The same here. Group chats not working, and some 2-person chats not working too.

Groups does not work in Mail under Mavericks

Its not just smart groups, by I cannot get any of my Groups to work with Mail under Mavericks. I am weary of having to type out the address for each person separately. Is there some better way?

I don't know why typing he name of a regular group does not work for you, but…
Another way is to open the address panel, select a group, then select all in the group, then click the two button.

OS10 Hub - Conversation Display - Grouping emails using title not working

Hello,
One great feature of former blackberry and Outlook is the ability of sorting email together if they are relating the same discussion.
Their is an option for this in my Z10, but it doesn't work well at all. I had a discussion with someone using emails and we exchanged pictures and this kind of thing. The hub groups sometimes two messages together but that's it. There is no reliability or repeatability. And when I deactivate the function it is even worse as the few which were grouped together starts to be as unique entry (which is the expected behaviour under such settings).
Is the "Conversation" Display style working well on your handset ? This is pretty basic thing and my old BB 9800 used to do it properlly...
Thanks for your feedback.

I have the same problem as you..
It would be great to imporve this . For now grouping option is not working.

In SharePoint sorting is not working in the list.

Sorting is not working when i click on the list column, where the column filed is an people or Group datatype.
Please help me out in this.
Ramesh S

Hi,
You can refer this post-
https://social.technet.microsoft.com/Forums/office/en-US/b748bb03-4881-4aa5-9c87-bd4558b9201c/unable-to-sort-task-lists-by-assigned-to-column?forum=sharepointadminprevious
Thanks,
Danny
Please remember to Mark as Answer if it works or vote of it is helpful

Lync 2013 Group Chat not working

We have a 2010 server and when I move people over to 2013 group chat does not work. I can select the people I want to talk to, but they don't see any of the conversations. When I move the back to the 2010 it works again.
We are running office 2013, lync 2013 and exchange 2010.
Any suggestions?

Have you installed Persistent Chat in Lync 2013? You'll need to migrate the group chat data to the Persistent Chat pool and setup a Persistent Chat Endpoint for the legacy 2010 group chat clients, see: http://technet.microsoft.com/en-us/library/jj204901.aspx
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Group Messages Not Working between Android and iPhone Users on iOS7

Hi there,
I am a former iPhone user. I recently converted both my line and my wife's line from the IPhone 5 to a Motorola X Android phone. We kept our same phone numbers, but we completely switched from Verizon to AT&T. I have noticed that text messaging works perfectly on an individual basis when I correspond with individuals who have the iPhone, but Group Messaging is not working correctly. I am able to send messages to a group and they receive them just fine, but when they respond back to me, I do not receive their responses (as it appears they are going through as iMessages). My wife is having the same issue on her phone. After doing some detective work, I have found that hundreds of other users are having the same issues on their smartphones when they make the switch from an Apple product to an Android phone. There are a variety of "bug fixes" listed on the web, but I have completed all of them and I am still having the same issue. Here is what I have done so far...
*Factory reset both of our phones and removed the SIM cards (since we are with a new phone carrier)
*Changed both of our apple ID passwords
*Removed both of our phone numbers from Apple's database all together
*Unregistered both of our iPhone products with Apple
*Had all of my friends/family switch SMS to "On" in their Settings tab
So now what? I read one post on an Apple forum that said that they are aware of the issue and we can expect a fix in a future iOS update...but when is that going to occur, if at all? It is problems like these that led me to leave Apple all together, and here I am after having left the company, and I am still left high and dry searching for solutions to my problems. Who can help, and how can I remedy the situation?
Anything you can provide to help out would be great.
Thanks.

There are reports of iOS7 altering the settings on iMessage's connection to the iPhone. Verify that each of the iPhone and the Mac is receiving on the "channel" (phone number or email address) on which the other is initiating iMessages.

Group Policy not work in some client machine.

Hello All,
Existing environment is AD 2012. gpupdate /force command does not working in some client machine. And it's occur randomly. Error shown about 15-20% of client machine. Please suggest. Hopefully this time get reply from community.
The Error:
User policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller
has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
Computer policy could not be updated successfully. The following errors were enc
ountered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.

Thanks for your reply. basically this error occurs with in same location as well as branch location. i have check event log in AD but not got any specific error. AD health status is ok. AD to AD synchronization also working well. All the client machine running
on windows 7 64 bit and few of them are windows 8.
Please suggest. if you need any event log for analysis i can send you.
Thanks
I recommend you examine the event logs upon an affected client machine. Specifically, look for the surrounding events on that machine (both System, and Application logs), for the hours previous and the hour after.
The time period may vary according to your environment (e.g. what is expected/normal for your environment, your configured GP refresh cycle-time).
e.g., are there network drops, or power drops, or system crashes, restarts at the similar time.
if it's a laptop, is it wireless? Was there a transition from wireless to wired operation?
Is there VPN in use?
If you are able to compare with another machine (I would encourage that), to understand what "normal" looks like in the logs, so that you have some kind of baseline data for comparison.
Other checks, maybe confirm that the machines are updating as required (have the relevant WindowsUpdates etc), and consider if some security/protection/firewall software might be interfering with normal Windows operations.
Also the potential for malware or virus, which can disturb many basic services (ensure a scan is performed and returns clean).
If you have the opportunity for an affected user to contact you urgently when the symptom occurs, check that the gpt.ini file is accessible from their PC.
e.g.: \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini
This file is hosted within the replicated SYSVOL share on your DC's, so check that it is accessible.
You might also validate the particular GPO this refers to, and check each of your DC's holds the correct copy of the files for that GPO GUID.
If you open that GPO, and perform a minor change to it (e.g. add a comment), then click Apply, OK, this should cause the GPO contents to replicate an updated version (be cautious, depending upon the nature of that GPO !!!)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Windows 2008 Group Policy not working in Windows 8.1

Hi ,
We found that the GPO settings created in Windows 2008 is not working in a Windows 8.1 machine.
One example is the proxy settings.
We confirmed from gpresult that the GPO is in the list but checking the actual proxy settings, it is not applied.
Regards,
Jhun

Hi,
How did we configure the proxy settings, using Internet Explorer Maintenance? If it is this case, just as Martin suggested, we can’t use IEM to manage
IE 10 and IE 11. However, we can configure the proxy setting via Group Policy Preferences (GPP).
Regarding this point, the following blog can be referred to for more information.
Configuring Internet Explorer 10′s
Proxy Via Group Policy
http://johnfail.wordpress.com/2013/06/15/configuring-internet-explorer-10s-proxy-via-group-policy/
In addition, when we use this GPP extension, pay attention to GPP F5-F8 keys.
Regarding this point, the following blog can be referred to for more information.
Group Policy Preferences F5 F6 F7 F8 “documentation”
http://msitpros.com/?p=1014
Please Note: Since the above two websites are not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy
of this information.
In addition, regarding the deprecation of IEM, the following article can be referred to for more information.
Appendix B: Replacements for Internet Explorer Maintenance
http://technet.microsoft.com/en-us/library/jj890998.aspx
Best regards,
Frank Shen

Video Group call not working

Hello! I have recently purchased a laptop with Windows 8.1 with pre-installed Skype application. When When I video-call a single person, everything is working normally, and I am able to see the other person. However, when making a group call, I am the only one that cannot see neither of the parties, though I am able to hear them. I do have the latest Skype application. Also, I cannot recieve pictures. Where is the problem?
Solved!
Go to Solution.

Hi there, I am having a similar problem. When I make group video calls (on my PC with Windows 8.1), the people on macs or iphones can only be heard but not seen. And I get a message on my screen that says something like their version doesn't support group video? But I've done everything the forums says:
1) they have the latest iPhone and just downloaded Skype which is the newest version (no older versions here)
2) I'm the one hosting the call, so they're just joining in (because I know iPhone can't host, but they're supposed to be able to join group video chats).
3) I've added their name to my contacts list and dragged their contact into the group call box to initiate the call (so they're not joining in later, they're there at the start of the call).
4) And we tested prior to the group call to make sure that one-on-one video calling is working.
5) Everyone else on the call who are on a PC has the group video chat working fine.
6) Only calling with 3-4 people in a group.
What am I missing? Please help.

Anonymous Access Not Working on 3 Lists (Slideshow provided in link)

There are three lists that have anonymous access settings configured.
The anonymous access settings however do not work for some reason. I need to know how to make them show up AGAIN.
The SharePoint administrator before me had all the lists working properly with anonymous access.
I, unfortunately, inherited permissions from parent on all lists and sites, and somehow broke the anonymous permissions. They don't work anymore.
Please see the slideshow to view what I am looking at. This will show all pages and their respective permissions per page.
Anonymous access permissions stopped working on all three lists when I disabled them. When I tried to enable them again, I assumed they would work easily, but they do not.
You will be viewing what I see as a site collection administrator. When I try to view in incognito with these settings it doesn't work.
http://s304.photobucket.com/user/mirzabaig1/slideshow/
http://s304.photobucket.com/user/mirzabaig1/library/?sort=9&page=1

Hi,
Thanks for your sharing! It will be beneficial to others in this forum who meet the same issue in the future.
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Post Migration from SP2010 -Attach File Button not working in any list new/edit forms

Hi,
We have migrated the SharePoint 2010 farm to Sharepoint 2013 on last saturday and we are noticing an interesting issue after the migration .
On any custom list on any web application ,When we create a new item,if we click on attach file button in the ribbon,nothing shows up on the screen.
In the browser Dev Tools its showing an error message as "Cannot read Property style of null".
This is happening on a javascript (form.debug.js) on line No : 5276
(document.getElementById("partAttachment")).style.display = "block";
There is no element rendered in html with id "partAttachment",which is causing this error to happen.
Solutions tried are
1) Modified the List Advanced Settings to disable and enable the attachments ,which did not work
2) Ran the Sharepoint Configuration wizard which did not fix
3)Tried reset the site definition for all pages in the site from site settings
4) Deactivated and activated all the activated features in the site collection
Its an OOB List New Form,no customizations has been done.
Similar error occurring with List Edit form as well
when you click on the List Item in the List default view when you navigate to the list and when you click on attach file,a popup dialog to upload attachments appearing,However its not working when you
navigate into the list item and tried to upload attachment.
Please help if any Solutions / thoughts

Hi Christopher,
Thanks for your reply,
Farm Information
OS: Windows Server 2008 R2 SP1 Enterprise
SQL: SQL 2008 R2 SP2
SP -SharePoint 2013 with no CU applied
Method,we used is restored the content DB from SP2010 and attaching to SP2013 SQL Server
Site Collection is in 15 mode
It happens on new site collection even though its not migrated site.
Server is 16GB RAM 8Core Processor
If we create a new form from designer,attach file link is working
OOB New form.aspx is having List Form webpart
Custom New Form.aspx creaed with designer has data form webpart
if we create a new sharpoint site collection in 2010 mode,its working fine without any issues
Interestingly,all the javascript files loading were debug.js,Not sure how its loading all debug.js files

Group Message not working iPhone 6/ iOS 8

I am not able to receive group messages after I updated to iOS 8.0.2 I just activated my iPhone 6 about 3 weeks ago (Before the Apple pay update). It was working fine until I updated the software with the Apple Pay. Initially I thought ALL the group messages are not working. After few trials I realized it was only the case when the group included both iPhone and non-iPhone users. Groups with ALL iPhone users is working fine.
I have checked everything possible, but nothing works.
- Turned off-on iMessages
- Turned off-on Group messages
- Reset Network Setting
- Erased and Reset the Entire phone from Phone settings (Now operating on iOS8.1)- still not working
- Called my carrier and they didn't seem to understand why I was having this problem
I then spoke with Apple Support who ran few diagnostic tests and they didn't find anything. They suggested that I re-set the phone to brand new phone (with out iCloud back-up) via iTunes (not from phone settings) and see if that will fix this. I will try this later tonight and see if I have any luck.
I tried telling customer service that I want to return my phone and get a new one- but they seemed to keep me away from that option.
Has anyone else experienced this? If so, any suggestions?

Send a group message with your iPhone, iPad, or iPod touch - Apple Support
Send messages with your iPhone, iPad, or iPod touch - Apple Support
iOS: Troubleshooting Messages - Apple Support

Group Titles not working in Marker lists

Similar Messages

Maybe you are looking for