Grouped tables not grouping

I don't know if it's a coincidence or not, but recently I installed the iPhone SDK 3.0 beta 2, and I can't seem to create grouped tables anymore. It's a bit strange, and I keep looking for a possible code error, but I don't see one. I'm building for 2.2.1, so I'm not even trying to use any of the newer libs.
It's a really simple static table, two sections, one row in the first, one row in the second. Title on each section. Each of the rows ends up in the right section, the UITableView just isn't using the grouped table style. It's set in the nib file in IB, and if I open up the nib in a text editor the setting looks correct. Has anybody else experienced any kind of issue like this?
Other grouped tables that I created pre-upgrade to 3.0 beta 2 are still working just fine, I just can't seem to create any new nibs that work.
This is all testing in the simulator, btw.

Are you overriding the methods that declare the number of rows and sections in your view controller class as shown below?
- (NSInteger) numberOfSectionsInTableView: (UITableView *) tv {
return 2;
- (NSInteger) tableView: (UITableView *) tv numberOfRowsInSection: (NSInteger) section {
return 1;
If you have already done this, you could try re-creating the xib file to see if it helps.
And finally, you may want to install beta 3 to see if you are still having this problem.
Good luck!

Similar Messages

Planner group is not updated in service notification using BAPI

Hi,
Planner group is not updated in service notification using BAPI BAPI_ALM_ORDER_MAINTAIN.
I have written the below code, but planner group is not updated in the service notification.
Please advice which parameters do i need to pass to update planner group in the service notification.
          wa_methods-refnumber      = '000001'.
          wa_methods-objecttype     = 'PARTNER'.
          wa_methods-method         = 'CREATE'.
          wa_methods-objectkey      = wa_subscr1-aufnr.
          APPEND wa_methods TO i_methods.
          wa_methods-refnumber      = '000002'.
          wa_methods-objecttype     = 'HEADER'.
          wa_methods-method         = 'CREATE'.
          wa_methods-objectkey      = wa_subscr1-aufnr.
          APPEND wa_methods TO i_methods.
          wa_methods-refnumber      = '000000'.
          wa_methods-objecttype     = ' '.
          wa_methods-method         = 'SAVE'.
          APPEND wa_methods TO i_methods.
          REFRESH i_partner.
          CLEAR wa_partner.
          wa_partner-orderid        = wa_subscr1-aufnr.
          wa_partner-partn_role     = 'VW'.
          wa_partner-partn_role_old = ''.
          wa_partner-partner        = wa_subscr1-parnr.
          wa_partner-partner_old    = ''.
          APPEND wa_partner TO i_partner.
          REFRESH i_planrgrp.
          CLEAR wa_planrgrp.
          wa_planrgrp-orderid        = wa_subscr1-aufnr.
          wa_planrgrp-plangroup      = wa_subscr1-ingpr.
          APPEND wa_planrgrp TO i_planrgrp.
          REFRESH i_planrgrp_up.
          CLEAR wa_planrgrp_up.
          wa_planrgrp_up-orderid     = wa_subscr1-aufnr.
          wa_planrgrp_up-plangroup   = 'X'.
          APPEND wa_planrgrp_up TO i_planrgrp_up.
*----Change order details with Technician name
          CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
            TABLES
              it_methods   = i_methods
              it_header    = i_planrgrp
            it_header_up = i_planrgrp_up
              it_partner   = i_partner
              return       = i_return.
Thanks & regards,
Krishna

Try this way
CALL FUNCTION 'BAPI_SERVNOT_CREATE'
EXPORTING
* EXTERNAL_NUMBER =
notif_type = 'S3'
notifheader = ls_notif_h
* TASK_DETERMINATION = ' '
* SENDER =
* ORDERID =
IMPORTING
NOTIFHEADER_EXPORT = ls_notif_e
TABLES
* NOTITEM =
* NOTIFCAUS =
* NOTIFACTV =
* NOTIFTASK =
* NOTIFPARTNR =
* LONGTEXTS =
* KEY_RELATIONSHIPS =
return = lt_return
* IF lt_return IS INITIAL.                                               " <<< Comment this lie
read table lt_return into ls_return with key type = 'E'. " << Change
if sy-subrc ne 0.                                                             " << Change
COMMIT WORK AND WAIT.
write: / ls_notif_e-NOTIF_NO.
ELSE.
LOOP AT lt_return INTO ls_return.
WRITE:/ 'errors'.
* ls_return.
ENDLOOP.
endif.
a®

PCUI error: Field group could not be read completely

Hello,
I am trying to remove some fields from the Sales Data tab in the Sales Orders application CRMD_BUS2000115. I have changed field groups before, noth in CRM 4.0 and CRM 5.0, but in this case, I always get this error.
By going into debugging mode (tracelevel set to 2222) I determined the main field group to be SLO_SALES, with lots of smaller reference groups below. Whenever I change one of the reference groups and try to generate the layout of SLO_SALES I get the error "Field group could not be read completely". I even reverted all changes by emptying all the entries from the reference groups so that my c-tables are empty, but I still get the error. All field groups below this one yield the error "No field group selected in blueprint table", so I cannot build those either.
Has anybody else tried to change the contents of that application in that tab?
Regards
Thomas

Hi Thomas,
Everytime you do changes in the reference group the entries in table 'CRMC_FIELDGRP' changes. So you will have to go to this table check entries for the main feild group 'SLO_SALES' in your case and then change entries for this feildgroup in CRMC_BLUEPRINT_C. The idea ia that the data should be consistent/same in both the places.
Hope this helps you.
Regards,
Hetal.

TF201072: A user or group could not be found

We are using TFS2010 (for source control only), and until recently
everyone was using VS2010. Our developers just installed VS2012.
When you go to "Pending Changes" in Team Explorer, we are seeing
TF201072: A user or group could not be found. Verify that the
users and groups used in your work item type definition have been added
to Team Foundation Server., twice, at the top. We can still check-in code from VS - seems this error is ignored.
However, we are unable to shelve changes - when you attempt to
shelve, the same error comes up in a popup, and the shelveset is not
saved.
We can shelve using the command prompt (tf shelve), and
can still shelve using VS2010, so it doesn't seem to be a permission
issue. Also, the TFS administrator is not seeing the error message, and
can shelve from VS2012 with no error.
Any thoughts as to what could be causing VS to error out here? We've tried clearing out the TFS cache, creating a new workspace, and gone over every option we could find in Visual Studio.

Hi Rudy,
I'd like to know more details about the reproduce steps, and whether you have upgraded your TFS server. If you don't have permission to access the database, then you can ask TFS administrator to grant you corresponding permissions to access the database
you're trying to access.
And you can check whether built-in records were missing in table TFSIntegration..tblsubscription. Refer to the link below for more details:
http://blogs.msdn.com/b/emmamou/archive/2009/03/13/a-case-study-on-tfs-identity-replication.aspx?wa=wsignin1.0&CommentPosted=true#commentmessage
Another option is check if the SID of service account is correct. Replace SID if not, you can refer to this
thread for the steps.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Mobility Group Table *MUST* be populated in each WLC in same mobility group

For what it's worth,
I recently discovered that when you have multiple controllers and want to implement Mobility Groups, more is needed than simply entering the same Default Mobility Group Name for each controller within the mobility group. The following is required:
a) The IP address of the "Virtual" interface on each controller must be identical on each controller within the mobility group.
b) The Default Mobility Group Name must be identical on each controller within the mobility group (case sensitive).
c) The mobility table must be populated with an entry for each controller within the mobility group.
Otherwise, you will see some inexplicable behavior such as:
* LWAP access points refusing to change to a different controller, even if their primary controller is explicitly set and the LWAP is rebooted.
* LWAP access points unable to find any other wireless controller other than the one pointed to by the "CISCO-LWAPP-CONTROLLER" DNS entry (presumably, this would also be the case if DHCP Option 43 is used to point the LWAP to a controller). Once the first controller reaches its max. capacity of LWAPs, no more LWAPs can join.
* Even MASTER CONTROLLER MODE has no effect.
Cisco TAC was able to explain the great mystery of the Mobilty Group Table to me. However, unless you know your problem is related to mobility groups issues, you might not know to start there (I know I didn't).
The least difficult method I have found for populating the mobility group table is as follows:
Build a text file with one entry for each controller in the mobility group as follows:
Log into the GUI for each controller and selecting: Controller -> Mobility Management -> Mobility Groups, click the "EDIT ALL" button and copy the MAC and IP address from the text box into a text file using NOTEPAD. Repeat this for each controller, creating a new line for each:
The format for the entries is as follows:
00:1a:6c:91:22:A0 192.168.20.44
00:1a:6c:91:22:B4 192.168.20.45
Once the text file is completed (one entry for each controller in the mobilit group), click the EDITALL button and copy the entire contents of the text file and paste it into the text box on the controller GUI, click the APPLY button and click Save Changes. Repeat for each controller.
Again, make sure that the following settings are IDENTICAL in each of the controllers in the Mobility Group:
* The IP address of the "virtual" interface ( Controller -> interfaces ) must be the same on all controllers.
* The "Default Mobility Domain Name" ( Controller -> General ) must be identical on each controller in the mobility group (note: the Mobility Domain Name is case sensitive).
After making changes directly to the controllers, a "refresh from controller" in the WCS might be needed to get the WCS to attempt to synchronize itself with the controllers.
Here is a link to the 4.2 Wireless Controller Configuration Guide which discusses this in greater detail.
http://www.cisco.com/en/US/products/ps6366/products_configuration_guide_chapter09186a00808e638b.html
It is unfortunate that there are currently no mechanisms in the WCS 4.2 to make these changes in bulk (i.e.: The WCS has no Controller Template to do this).
Also, if you ever need to replace a controller, you will need to update the Mobility Group Table in each controller in the Mobility Group (since the tables will have the MAC address of the old controller which will now be different in the new replacement controller).
Despite having used the "unified" product for some time now, there are still surprises from time to time. I just thought that I would share my experience for those who may want avoid it and/or who may be encountering any of odd the behavior described above.
- John

Hi John,
Nice work with this very relevant info! Please post a short reply here so that we can give this the nice rating it deserves :)
Thanks again!
Rob

Wage group is not getting updated in confirmation.

Hi
When confirmation is done through idoc ( type Conf21) then wage group is not getting updated in confirmation table AFRU.
When confirmation is done through co11n then it gets updated.
How to get it updated when confirmation is done through idoc.

Hi,
In we02 Kindly check if the required field is correct mapped in the IDOC.
Reg
DSk

Problems with GROUP BY - not a GROUP BY expression

Hello,
I am fighting little bit with GROUP BY expression.
After some tests I am able to reduce the problem to following...
When can I use column numbers in GROUP BY expression?
Consider this situation:
CREATE TABLE EMP4 (
NAME VARCHAR2(10)
COMMIT;
INSERT INTO EMP4 VALUES('Tamara');
INSERT INTO EMP4 VALUES('John');
INSERT INTO EMP4 VALUES('Joseph');
COMMIT;
SELECT NAME, COUNT(*)
FROM EMP4
GROUP BY 1;
00979. 00000 - "not a GROUP BY expression"
-- This is working
SELECT NAME, COUNT(*)
FROM EMP4
GROUP BY NAME;Why is the GROUP BY 1 not workig?
I am using the GROUP BY 1 because in real query there is some PL/SQL function which somehow modifies the column NAME, so I can't use the column name
SELECT TEST_PACKAGE.AppendSomeCharacter(NAME), COUNT(*)
FROM EMP4
GROUP BY 1;Of course I can nest the query and move the COUNT and GROUP BY to outer query or maybe something else, but I was just curious why is the GROUP BY not working...
Also in real query, there are 3 columns in the GROUP BY expression, so I have there GROUP BY 1, 2, 3
Thanks for help

hai
try the following
CREATE TABLE TBL(ID NUMBER,VAL VARCHAR(20));
INSERT INTO TBL VALUES(1,'Z');
INSERT INTO TBL VALUES(2,'X');
INSERT INTO TBL VALUES(1,'Z');
INSERT INTO TBL VALUES(2,'X');
INSERT INTO TBL VALUES(3,'A');
INSERT INTO TBL VALUES(4,'H');
INSERT INTO TBL VALUES(5,'B');
INSERT INTO TBL VALUES(6,'C');
INSERT INTO TBL VALUES(7,'T');
INSERT INTO TBL VALUES(3,'A');
INSERT INTO TBL VALUES(4,'H');
INSERT INTO TBL VALUES(5,'B');
INSERT INTO TBL VALUES(6,'C');
INSERT INTO TBL VALUES(7,'T');
CREATE TYPE SAMPLETYPE AS OBJECT ( ID NUMBER, NAME
VARCHAR2(25) ) ;
CREATE TYPE SAMPETBLTYPE AS TABLE OF SAMPLETYPE;
CREATE OR REPLACE FUNCTION SAMPLEFUNC
p_colname varchar2
)return SAMPETBLTYPE pipelined as
ret_val SAMPLETYPE;
TYPE cursor_ref IS REF CURSOR;
fcur cursor_ref;
di TBL%ROWTYPE;
sqlstr varchar2(1000);
colname varchar(30):=p_colname;
begin
sqlstr:='SELECT * FROM TBL ORDER BY '|| colname ;
DBMS_OUTPUT.PUT_LINE(sqlstr);
open fcur FOR sqlstr;
loop
FETCH fcur INTO di;
EXIT WHEN fcur%NOTFOUND;
ret_val:=SAMPLETYPE(di.ID,di.VAL);
PIPE ROW(ret_val);
end loop;
close fcur;
return;
end;
select * from table(SAMPLEFUNC('ID'));
select * from table(SAMPLEFUNC('VAL'));

Logical Aggregate Column (count(distinct)) Does Not Group for SQL Server DB

When utilizing the count(distinct column_name) aggregate function within a Logical Fact source in the Business Model and Mapping layer in the RPD file the output in BI Answers is not grouping correctly for SQL Server 2008 database sources only. All Oracle database sources represent the same aggregate column correctly within BI Answers.
I am using OBIEE version 10.1.3.3.3
Does anyone know how to resolve this issue?
Thanks in advance,
Kyle

I thought that I would update my current findings with this issue. If you display the report in BI Answers as a Pivot Table view the aggregate column displays properly, it does not in a Table or Compound Layout view for some reason. I am still working with Oracle Support on this.

Grouping Table Columns

Hi All,
In my webdynpro application we need to "Group Table Column". I am using NWDS 2.0.9. The "Insert Group COlumn" feature is not there in NWDS 2.0.9. If so how ca i group my table columns. Can anyone provide me a solution for this.
Regards,
Divya

Hi Divya,
I have done this in my application too.
I have used two tables,
The things you need to do is,
1. Create a scroll container
2. Create 1st table,
3. assign the columns coming under its header.
4. create the 2nd table,
5. assign the rest of the columns under that header.
6. Table properties to be set
7. Now make footer visible false for both the table.
8. visible no of rows = -1
9. assigning same context or model node to both the tables will make it as one table itself, and selecting row in one table will also select same row in other table.
10.Dont keep wrapping as true in any table cell editor, because if there occurs any wrapping in one table, the alignment of rows will be disturbed for both.
11.And using scroll container instead of footer will not create the scrolling event of footer in the application.
This will solve your problem.
Mohak.

Group Memberships not Flowing into Metaverse

Hello,
I'm trying to figure out why the group member attributes in the CS are not flowing into the MV. Here's what I have:
An HR system running on SQL Server
A staging database that extract data from the HR system
The staging database has a table representing person object
The stating database has a table representing person multi-valued attributes (i.e location, job code, etc)
The staging database has a table representing group objects
The staging database has a table representing group memberships (mult-valued)
A SQLMA connected to the person and person multi tables
A SQLMA connected to the group and group membership tables
All group memberships are based on job codes and locations. There are no approval process in place. If they have this job code, they get certain groups. That's all calculated in the staging database and the memberships are in the group membership
table
This system does connect to AD (and a few other things), but I'm not concerned with that, right now.
I've read 100 articles on this, most of them over 5 years old, and tried the ones that made sense. The flow from the database into the CS works well. No issues there.
But, a search of the metaverse for the group shows an empty member attribute. The sync process is not throwing any errors. At least they're not showing up in the sync service app or the event logs.
Where allowed, I'm using rules extensions for everything. I can't use a rules extension to set the member attribute because it's an rdn.
I'm going to move forward with this by extending the metaverse schema and adding a multi-valued string attribute named "memberOf" to the person object. Then, I'll modify my existing MA to use that attribute instead of the member attribute.
I'm not sure what kind of issues I'm going to run into when exporting that to AD. I'll cross that bridge when I come to it. I don't anticipate that being an issue as the dns for all these objects will be calculated by the ADMA based on locations,
group functions and person types (bascially, I don't care about the MV rdn).
Anyway, I'm looking for some real world insight on this. This whole effort is to migrate off an existing IDM system that works very, very well but quite expensive to license.
Thanks,
Greg Wilkerson

Hey Cameron,
I have total control of all the DB tables FIM is accessing. I build them up as part of IDM process.
I've read this article, along the many others that address the "manager" scenario. This really doesn't apply in this case as the user and group objects are loaded in separate MAs. Getting reference values to flow with both object live in the
same CS shouldn't be an issue.
I also saw a solution where the group and user objects were in the same table and differentiated by the "object_type" value (user, group). That solution solved the issue of the groups and user being in the same CS. As I grow tired of my daily
FIM beatdown, that solution is growing more attractive. That's a major DB redesign, and seems quite inefficient.
The multi-value table for group memberships already exists in the DB. For FIM purposes, I transferred that data into the user object multi-value table. See screen shot. I can certainly configure the group MA to access that multi-value table
and load the group members as references. But, because the group MA CS will not contain the user objects, I don't see how the references will be set. If the reference value isn't set in the CS, it's not going to flow into the MV (at least I haven't
figured out a way to set the an reference value for an object in the MV - my problem all along.
This whole "setting a reference value" encompasses much more than just group memberships in my implementation. Telephone resources and physical access (key cards, etc) are provisioned through the existing eDirectory system. These objects exist
in our current IDM system and are associated with users based on rules. So, the reference value process is something I need to figure out, if I'm going to use this product.
Maybe I could use a stripped down ECMA2 as a "staging" CS, export the users and groups into this CS and assign the reference values, then import the groups back into the MV, memberships intact. I'm not sure that would get me where I want to go, and
it seems like a lot of extra "stuff" to solve what should be a simple problem. Hmmmmmm. Or, connect the ECMA2 directly to my group membership multi-value table in the DB. Hmmmmmm. I'd still have to export the groups and users into that
CS, but the import might be much more straight forward. Hmmmmmm.
The structure of my GroupMembership table (both columns are anchors or directly translatable to anchors):
EmployeeGroups
   GroupName varchar(50) not null,
   EmployeeID nvarchar(50) not null,
   ID int identity(1,1) not null

Specified Order Grouping does not show if Distinct Count is Zero

Post Author: Hieu
CA Forum: General
Hello,
I'm using Crystal Reports XI R2 with SQL data source. I have a cross-tab report with grouping in specified order. It's a report of applicants applying to a college. The grouping is of various majors (degrees). The report summarizes (distinct counts) the number of applicants for the groups of majors. The problem is that if the count for a group of major is zero, then that Named Group does not appear at all in the cross-tab report. I want the Name Group to appear with the count of "0".
I notice this same phenomenon with specified order grouping anywhere and not just in a cross-tab. I have tried changing "convert database/other null values to default" but nothing working yet.
Any help will be most appreciated. Thanks.

Post Author: synapsevampire
CA Forum: General
It's not a phenomenon, it's how databases and SQL works.
You didn't get any rows back for those with a zero distinct count (otherwise the count would be 1 or more, right?), so Crystal doesn't show any data for those groups.
So to display a zero for those that do not exist would reuire either advanced SQL, or manual summaries.
One method for manual summaries is to use Running Totals. Select distinct count of the applicants and group by the majors, then in the evaluate use a formula place:
{table.majors} = "Blah 1"
Creating a seperate Running Total for every group and replacing "Blah 1" with the various majors.
-kai

LDAP- When importing a Group it goes into Security Users and not Groups.

Hello,
I created a new LDAP Server
cn=GroupBI,OU=Groups,OU=Systems,OU=Milan,OU=Italy,OU=Countries,DC=u,DC=a,DC=g
Connection Test was ok.
The problem is on importing members of my group, on Security Import window instead of having the group drop-down list populated I have the user drop-down list populated with "GroupBI".
If I import this group (considered as a user by BI) it goes into Security > Users and not Security > Groups.
This does not make sense.
I'm sure this "GroupBI" is a group and not a user and the atribute type used is sAMAccountname
Any help?
Cheers

Let me tell how we did Authentication using LDAP
I havent imported any groups or users once the LDAP is set up and connection was successfull. I simply created the session variables USER DISPLAYNAME EMAIL and mapped to LDAP Variables uid, displayname, mail.
Authentication is done in this way by mapping the OBIEE variables to LDAP variables instead of importing the groups.
Now for Authorization I created the groups populated using some db tables and captured the group name and loglevel and applied filters on the group in the rpd for data level and permissions on the group in webcat for object level.
So just for Authentication purposes I think we can authenticate with out really importing groups as long as you map OB variables to LDAP
hope it helps
Prash

Layout generation field group could not be read completely

Hello,
if I try to generate some field groups which I have copied on a new sight and changed afterwards I get the error:
Layout not saved as warnings or errors occurred during layout generation:
ACT_DETAIL_TASK ZNEW Field group could not be read completely
This happens only with certain objects not at everyone ?
Thanks in advance
Michael

Hi Thomas,
Everytime you do changes in the reference group the entries in table 'CRMC_FIELDGRP' changes. So you will have to go to this table check entries for the main feild group 'SLO_SALES' in your case and then change entries for this feildgroup in CRMC_BLUEPRINT_C. The idea ia that the data should be consistent/same in both the places.
Hope this helps you.
Regards,
Hetal.

Auto Invoice Import Program is not grouping by Transaction Type

Hi All,
The Auto Invoice Master program which inturn spwans Auto invoice Import program is not grouping by Transaction type. It is printing for each transaction individually.
What could be the reason for this to happen?
Please let me know.
Thanks,
Prathima

Dear,
You must define "Auto-Invoice Grouping Rules". Define Group by column of the interface table where u are moving transaction type.
Hope it will helps u
Regards

How to group table rows using GroupedColumn?

Hi all,
i know by binding the grouping value to a context, it can merge rows into one. but this only works if the two rows are adjacent.
if the context looks like this:
value 1
value 2
value 1
value 2
it can not group them together
how to group them together and merge the rows?
thanks.

Hi erv,
U need to use the TableSorter class for this.
You can download the TableSorter.java class from the tutorial Working with Tables in Web Dynpro.
Here you can select the project A) Creating Tables and download the Ready-to-use project. The lick to download project is:
[/docs/DOC-8061#46|/docs/DOC-8061#46]
Once you have downloaded the tutorial, you can find the TableSorter.java class in this path
TutWD_Table/src/packages/com/sap/tc/webdynpro/tests/utils
For more information refer to this blog:
[Enhanced Web Dynpro Java TableSorter for SAP NetWeaver 04s|/docs/DOC-8061#46]
Regards,
Sayan Ghosh

Grouped tables not grouping

Similar Messages

Maybe you are looking for