Groups not showing up in Planning

I have created groups in Shared Services and provisioned the groups. I can see the users and groups in Essbase using the administration services console. In Planning, when I try to assign access to a form or dimension, I do not see any users or groups. Any ideas?

You shouldn't have the same application appearing under multiple application groups. If I were in your situation I'd try unregistering the application (Planning > Administration > Application Settings > Unregister Shared Services) and then register it again (Register Shared Services), making careful note of your application group selection during the registration process. After that, I'd use Shared Services to provision appropriate Planning roles for the application.

Similar Messages

  • CN41N and S_ALR_87013533 report not showing Production order planned cost

    Hi Experts,
    I am having issue to get total planned production order values in my CN41N or S_ALR_87013533 cost report. I am facing 2 issues :
    1. CN41N repoet does not show individual material cost planned in BOM.
    2. CN41N report and S_ALR87013533 report does not show total value but only picking fixed value.
    Example :
    1. CN41N report :
    Above screenshot shows no values in Project plan cost & Order cost column but it shows total cost as a lumpsum on top for project. I need to know how can i get material cost populated here for Project Valuated stock material?
    2. S_ALR_87013533
    This report shows Total Cost of BOM as 1 line under Material Procurement activity similar to CN41N report. Also Order value is picking from Fixed cost from planned order and total cost is added on top. How can i get Total cost picked from production order?
    Is there any Setting in PS config which allow me to pick the detail production order plan cost in both report under planned cost.
    Thanks in advance.
    Ashish

    Hi Ashish,
    I doubt whether Item level reporting  in S_ALR... (hierarchy report) is possible or not because I haven't seen item level cost in them only the lump-sum cost because they are summarized at cost object level itself. Navigation path are there which we use to go into details of cost.
    Please check the following links:
    https://scn.sap.com/thread/1743833
    (In the above thread,focus on  Mr. Mohamed Rafi comment.)
    http://scn.sap.com/thread/3530080
    http://scn.sap.com/thread/1311820
    Order cost plan in report CN41N
    Display of plan cost., CN41N | ABAP, SAP, benX AG, benXBrain,&…
    Just an additional pointer ,have a look on your costing variant and variation variant settings for material section.
    Regards
    Saurabh

  • Address Book Groups not showing up in iTunes

    The groups that I have set up in Address Book are not showing up in the Info tab in iTunes when attempting to sync my iPhone. The iCal calendars show and sync with no problems. I have tried resetting sync history, logging off of my .Mac account and logging back in.
    Any advise? Thanks.

    Don't take what I have to say as fact, because I don't use a Mac and could be mistaken. I remember reading last night something about people taking and checking the box on the Summary page of iTunes to replace the info on the iPhone with the computer. Once that was done, it seemed to correct this issue and showed the address groups after that.
    It might be worth the experiment, however I would make sure I had a backup of the phone before I tried it. I know it was only the last day or show that I read it, so if you want to search the forum before you try it, be my guest. I don't want to ruin anything for you, but I just remember reading that someone did that and it fixed it.
    Hope this helps.

  • Groups not showing up in contacts?

    Hi! My groups are not showing up in my contacts in the Address Book. Any idea why, or how I can make them show up? Thanks.

    If all contact info is available online with your MM account - when checking your MM address book via webmail access using a browser, try turning Contacts off for over the air syncing with your MM account on your iPhone. This will erase all contact info on your iPhone. Follow this by turning Contacts back on for all contact info available online with your MM account to be re-downloaded to your iPhone's address book.
    When you say you did a complete reset with your iPhone, does this mean you restored your iPhone with Tunes from your iPhone's backup?

  • Tkprof not showing the Execution Plan for Statement

    Hi all
    using oracle 9i release 2
    I have issued the following statements
    alter session set sql_trace
    alter session set events '10046 trace name context forever, level 12';
    --then executed a pl-sql procedure
    after reading the traceout outfile it shows the Execution plan for statements directly wirtten under begin and end block and doesnot displays the plan for the statements written like this
    procedure a is
    cursor b is
    select ename,dname from dept a,emp b
    where a.deptno=b.deptno;
    begin
    for x in a loop --plan not found but stats are written
    select ename into v_ename from emp where empno=300; --does show the plan+stats
    end;
    what I am missing to get the actual plan in trace output file
    thanks in advance

    You have to exit sql*plus after running the procedure, example tkprof is below:
    declare
    cursor c is
    select ename, dname
    from emp, dept
    where emp.deptno = dept.deptno;
    begin
    for v_x in c
    loop
    dbms_output.put_line(v_x.ename || ' ' ||v_x.dname);
    end loop;
    end;
    call count cpu elapsed disk query current rows
    Parse 1 0.00 0.00 0 0 0 0
    Execute 1 0.00 0.06 0 0 0 1
    Fetch 0 0.00 0.00 0 0 0 0
    total 2 0.00 0.06 0 0 0 1
    Misses in library cache during parse: 0
    Optimizer goal: CHOOSE
    Parsing user id: 68
    Elapsed times include waiting on following events:
    Event waited on Times Max. Wait Total Waited
    ---------------------------------------- Waited ---------- ------------
    SQL*Net message to client 1 0.00 0.00
    SQL*Net message from client 1 0.00 0.00
    SELECT ENAME, DNAME
    FROM
    EMP, DEPT WHERE EMP.DEPTNO = DEPT.DEPTNO
    call count cpu elapsed disk query current rows
    Parse 1 0.00 0.00 0 0 0 0
    Execute 1 0.00 0.00 0 0 0 0
    Fetch 15 0.01 0.00 0 44 0 14
    total 17 0.01 0.00 0 44 0 14
    Misses in library cache during parse: 0
    Optimizer goal: CHOOSE
    Parsing user id: 68 (recursive depth: 1)
    Rows Row Source Operation
    14 NESTED LOOPS
    14 TABLE ACCESS FULL EMP
    14 TABLE ACCESS BY INDEX ROWID DEPT
    14 INDEX UNIQUE SCAN DEPT_PK (object id 40350)
    Best Regards
    Krystian Zieja / mob

  • Public logon group not showing up

    Hi everybody
    I am trying to create a SAPGui entry for logon group access to customer ECC6.0 system.
    I have configured the service and sapmsg.ini file.
    I was told by customer sysadmin that PUBLIC logon group was created but in the list of logon groups I can only see SPACE.
    Moreover, if I complete the procedure with SPACE logon group, when I try to login it won't succeed, warning that even the client number is wrong (?!).
    My questions are:
    - how to retrieve message server number and port (even though I am fairly certain that they are ok, otherwise the Logon group list wouldn't have been populated... right?)
    - what might be the cause for the PUBLIC logon group not to show up
    Thanks, points will be awarded
    Vincenzo

    Hi,
    Since you get such strange errors, it almost seems like you are trying to logon to the wrong server.
    Please check sapmsg.ini again to see that the correct hostname/ip-address is entered.
    Also, did you notice if the server name is correct at the logon screen ?
    Every Dialog instance or Central Instance gets logon group SPACE by default. Then, when you create logon groups for the instance,
    the group SPACE will disappear.
    In some installations the central instance and the message server both uses the instance number of the central instance as a base to calculate the ports.
    CentralInstance/DialogInstance = 3200, MsgServer=3600
    but, on some installations (E g Windows Cluster) this could be different.
    There you might have something like:
    CentralInstance/DialogInstance = 3200 and the MsgServer=3601
    You need to ask your sysadmin for message server port and host.

  • Update account group not showing in fs00

    HI, previously i have created 1 account group i.e. (current asset& liabilities group) without any posting i devided that into two group i e current asset , current liabilities. but problem is its not showing separately on drilldown of account group of gl master record.
    pls can u clarify me .

    Hi,
    Pls. check that newly divided account groups' From and To account range.  It should not overlap with the older one.
    Also check in t-code FSP0 to see if 2 account groups appear.
    Regards,
    SRidevi

  • Custom Groups not showing in Reports

    Hello,
    Per our reporting requirement, I have created few groups in Authoring pane. However, when I am going to select those groups in reporting, its not showing up.
    Env: SCOM 2012 R2.
    Any help is appreciated.
    Thanks,
    Binoy Das

    Hi,
    It seems like that there is a sync issue/latency between the operational database and the data warehouse in your case. Groups should appear in the data warehouse within just a minute or two in most environments. Check errors and performance on
    your management servers and sql servers.
    Do you see any error or warning Events in the OperationsManager Windows Event log on one of the management servers which could be related to db issues?
    Regards,
    Yan Li
    Regards, Yan Li

  • Contact Groups not showing up on Iphone when syncing with Mobileme

    My contacts show up in my address book on my Iphone but when I go to look at my groups the page is blank and I cannot get back to my contacts without closing and reopening contacts but still no groups. I want my groups to show up. I have at least 4 groups that show up on my me, and syncs fine with ipad....
    I THINK THIS IS A ISSUE with the new verizon iphone.
    Please help if anyone has

    I am having a similar issue. As is my wife. I also believe that it is a bug in the current iOS on the CDMA iPhone 4.
    It is just as you described, and I have to close Contacts completely in order to restore my access to the contacts list. And, like you, our groups show up just fine on our iPads (within minutes of making changes, as we sync over MobileMe).
    It doesn't appear to be a letter-case issue, as at least my login is in all lowercase letters.
    I sure hope that this is fixed in an iOS update soon! It's rather problematic for those of use who use their iPhones for business purposes.

  • ADF Data Visualizations group not showing up in Component Palette

    I apologize for my ignorance, but I cannot find how to solve this problem. I am trying to use the data visualization components such as graphs but my component palette does not show this. It does show ADF Faces, JSF, and some others, but not this. I tried adding more libraries to my project's properties, but it does not show up. I am using:
    JDeveloper
    Studio Edition Version 11.1.1.2.0
    Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
    Any ideas?
    thanks,
    Kerry

    Go into project properties -> JSP libraries and make sure you add the data visualization tag library.

  • HT201077 Photo stream group not showing up

    I was invited to a photo stream and I clicked join, but when the link takes me to my photo streams that stream does not show up no matter how long I wait

    Wow! Ive always just gone straight into photos from camera! Really appreciate that......

  • Members of Domain Local Groups not showing up through net group command

    Hello,
    I am trying to get the list of members in a Domain Local Group using "NET GROUP" command, but unable to get the member list.
    I get the message "group not found", whereas members of Global Groups  are visible.
    Thank you in advance !

    Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. 
    This is only one forum among the many that are on the TechNet Discussion Forums, and given your post, you likely chose the wrong forum. 
    This is a standard response I’ve written up in advance to help many people (thousands, really.) who post their question in this forum in error, but please don’t ignore it. 
    The links I share below I’ve collected to help you get right where you need to go with your issue.
    For technical issues with Microsoft products that you would run into as an
    end user of those products, one great source of info and help is
    http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums
    are also here: http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
    For Technical issues with Microsoft products that you might have as an
    IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
    http://social.technet.microsoft.com/forums/en-us, and search for your product name.
    For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the
    MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
    If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
    http://community.dynamics.com/
    If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! 
    Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem
    you’re seeing. 
    If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have
    a forum just for you!  It’s called the Where is the forum for…? forum and it’s here:
    http://social.msdn.microsoft.com/forums/en-us/whatforum/
    Moving to off topic. 
    Thanks
    MSDN and TechNet Subscriptions Support
    Did Microsoft call you out of the blue about your computer?
    No, they didn't.

  • Open Directory groups not showing up in Windows

    Hello,
    we are using Open Directory on a Leopard 10.2 as a primary PDC for mac, linux and windows clients.
    The Kerberos sign in works as expected, but we can not get any group created in the OD to be displayed (or selectable) from windows. All users show up, but no groups.
    Anyone got an ides or the same problem?
    Message was edited by: majs

    Same problem here. On Windows client we see only domain users, no domain groups.
    No solution yet.

  • New chat groups not showing up in client

    i have skype installed on my mac and, apparently, I was added to a few new converstations. I am not seeing any of the messages in my client though. No new group popped up in the left hand bar. Individual conversations are still working and old chat groups that I have work, but not these new ones for some reason.
    I logged into Skype on my iphone and I see the new chats there, so this is only on my mac client.
    I restarted skype on my mac, logged out, logged back in, and even uninstalled and reinstalled, but no luck. The new group chats still don't show up.
    Any ideas?

    Can you confirm you are using the latest Skype 6.18 for Mac from www.skype.com/go/download
    You can check your installed version from the menu "Skype - About".
    Please report back which Mac hardware you are using should you have problems updating to 6.18
    If you are already using 6.18: Please share the first 5 lines of output from issuing the following chat command in any chat. Just send this like any normal chat message:
    /dumpmsnp
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Groups not showing up in iPhone Sync Options

    Runnning iOS 5 on an iPhone 4S (although I don't think that's the issue)
    Running iTunes 10.5, Lion 10.7.2.
    When syncing my phone via USB (or wireless for that matter) under the info tab the option exists to sync Address Book Contacts and there is a radio button that should allow me to select groups, however there are no groups to select and much of it is greyed out.  I have 3 groups in my Address Book application, but they aren't showing up as options to sync to in iTunes.
    I have restarted the computer in an effort to get iTunes to recognize (and offer) the Address Book groups to no avail.
    Any suggestions?
    Thanks.

    Just as a follow up, I opened a support case with Apple on this topic because as stated my wife isn't/wasn't impressed with my Contact list.  The fundamental problem is iCloud basically takes all the Contact Groups and moves them into the cloud which prevents you from selectively putting AB Groups on your phone from within iTunes.  The resolutions was follows:
    1.  Close Address Book
    2.  System Preferences -> Uncheck Contacts (sync) (Note: Make sure you keep a copy on your Mac)
    3.  Wait an unspecified amount of time so that the contacts have time to sync up to the local Address Book.
    4.  Open Address Book (I don't believe that opening Address Book before your contacts sync matters) and verify that your contacts show up under 'On My Mac'
    5.  Reboot Mac
    6.  Open iTunes with your iPhone connected
    7.  Verify that you have a recent back up of your iPhone (iTunes Preferences -> Devices)
    8.  Goto 'Info' tab in iTunes under your iOS device
    9.  Check 'Sync Address Book Contacts' and leave it as 'All contacts'
    10.  Scroll to very bottom and check "Replace information on this iPhone' (assuming you don't want to Merge) Contacts sections
    11.  Click 'Sync' button
    12.  Once it completes the sync you should now have the option to sync only selected groups
    I've added a feature (www.apple.com/feedback) to iCloud for the ability to sync iCloud AND to selected groups...or if they are so inclined the ability to sync selected groups with iCloud in general.  This seems like a convoluted process to get this feature back but it works, I just wish Apple wouldn't change expected behavior for what I would think is a popular feature.
    BivDog

Maybe you are looking for