Groups not working on books in iTunes 12

In iTunes 11, I used to be able to modify the "Groups" field in books, which was very useful way to group related books.
In iTunes 12, I am no longer able to do so. Is there a work-around or do I need to go back to iTunes 11?

Hold down Shift as you Right-click > Get Info for the old dialog box with more options.
tt2

Similar Messages

TS3682 unable to activate iphone, keep getting a error that server is not working. to hook to itunes. i have done that and still can not activate

i have iphone 4 and it worked previously but then lost service, contacted provider and said would have to do factory reset. Did the reset and now can not activate phone. said server was not working to connect to itunes. Connected to itunes and still can not activate it. any suggesgtions?

This is the iPod touch forum. I requested your post be moved to the iPhone forum

What should I do? my iphone is not working in connecting to iTunes..

my phone is not working in connecting to iTunes, what should i do?

We will need a little more information from you to be able to help.
- Which computer do you have?
- Which Mac OS are you using?
- What audio hardware are you using? If you're using some external audio hardware have you tried selecting Built-in?
- Have you tried restarting?
- When you do restart do you hear the boot chime?

I was billed for a renewal with eHarmony that does not work. Eharmony said itunes claims the charge didnt go through but I have already been billed. How do I get my money back or get my subscription working??

I was billed for a renewal with eHarmony via iTunes that does not work. Eharmony said itunes claims the charge didnt go through but I have already been billed it is on my bank statement. How do I get my money back or get my subscription working?? I have all transaction ID's and invoice numbers. Please help this has been very frustrating, thanks.

Yes, I reported the problem using that exact sequence immediately after discovering the problem with the app. When I submitted my complaint and request, Apple redirected me the website of the app manufacturer where I submitted the same complaint/request for refund. I have not heard back from either, and was still charged, so I can only assume that is not the correct way to "Report a Problem" even though Apple would have you believe otherwise.

My itnues for pc is not working :( it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me

my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me

Please helppppp

Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please :)

Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please

Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
*Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

Response Groups not working

Hi there
My environment is a single Lync 2013 Front End Server installed on Server 2012.
It works since a year and now we want to use some response groups. I created 2 of them and everything seems fine but i cant call these groups. Not from internal and also not from external.
The clients shows an 500 internal server error with ID 26017.
So i traced the whole thing on the Front End Server. It seems the Response Group Service cant work with the local SQL Server. I see three error messages.
1. TL_ERROR(TF_COMPONENT) [2]0B90.37A8::07/23/2014-06:38:39.119.000002fb (RgsClientsLib,MatchMakingLocator.GetActiveInstanceFromDB:683.idx(479))
(0000000000150BA8)No instance registered as the active instance!
2. TL_ERROR(TF_COMPONENT) [1]1E08.2910::07/23/2014-06:38:42.462.00000a34 (RgsHostingFramework,CallControlManager.HandleAudioVideoCall:2049.idx(619))
(000000000362D054)Call is declined because Call Control is not started.
3. TL_WARN(TF_COMPONENT) [1]0B90.0B7C::07/23/2014-06:38:48.053.00000f2d (RgsClientsLib,MatchMakingLocator.GetActiveMatchMakingInstance:683.idx(301))
(0000000000150BA8)There is currently no active MatchMaking instance in the pool.
The Lync Server Event Log shows this error when the Response Group Service starts:
LS Response Group Service ID 31067
Lync Server 2013, Response Group Service Match Making could not find the Contact object used for subscribing to agents' presence.
Cause: The application has not been properly activated or the Contact object was deleted.
Resolution:
Deactivate and then activate the application for this pool.
Is there a way to reinstall / reconfigure the whole response group service incl. the active directory objects?
I hope somebody could help
Regards
Andreas

Have you seen this thread:
http://social.technet.microsoft.com/Forums/lync/en-US/cd25ddec-6e1e-4d58-9a9a-a530abfa82e3/response-groups-not-working?forum=ocsclients ?
He ran Get-CsApplicationEndpoint and received a warning that let him to a resolution.
Short of that, I'd rerun step 2 in the deployment wizard and restart services when you can to see if I could jog anything loose.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

After the upload of ios6, my iphone did not work...the itunes is saying that I need to restore iphone...how should i do it???

after the upload of ios6, my iphone did not work...the itunes is saying that I need to restore iphone...how should i do it???

Backing Up, updating, and restoring your iPhone and iPod touch software

Address book groups not updated in iSync and iTunes-iPod-info sync

Changes to address book groups are not reflected in iSync and iTunes. I.e. if I remove a group or add a group it is still the old list of groups that is listed in iSync and iTunes available for syncing with my phone or iPod. How do I get these list to be updated and reflect the present list in Address Book?

The suggested resolution essentially said "delete the address book and start over."
Ok, I can see how this will help but... a few questions:
1. How to I re-load the address book with my 500+ contacts without loosing my groups and all the data? The suggestion in the other discussion doesn't give any guidance on this
2. What caused the problem to begin with? In other words, how can I prevent it from happening again?
I discovered the syncing problem about the time I did the following three things:
1. Upgraded to 10.5.2
2. Upgraded my iPhone (and iTunes) to 1.1.4
3. Installed Bento (possibly a red herring) -- but it DOES connect to address book

Smart groups not working

Whenever I try to set up a course as a smart group, not only do I not see any options (see http://tinyurl.com/34rnar6 ) but I get the warning "We could not complete your iTunes store request. The iTunes store is temporarily unavailable. Please try again."
Has this been happening for a while, or am I just hitting the system at a bad time?
Thanks!

I have had this issue also since June 6th. Glad (and sorry) to hear others are having the same issue.
In addition to the original problem (see image in the first post), I have had other strange behaviors. I thought some Smart groups were corrupted, so I deleted then and tried to start over. When I tried to create new ones, sometimes it would open a different smart group (one was even not from our site). There seems to be much confusion.
Creating a new Smart group, I entered a title, and when I clicked on the + button to add a new row, it came up with all the lines of a different smart feed. On other attempts, I could add 1 or 2 lines before it would blank out like the original image shows. This happens on both my Mac and PC. It is causing large holes in our website.
Some links to the pages are:
Old but working: http://deimos3.apple.com/WebObjects/Core.woa/Feed/mdanderson.org.3116309021.0311 6309027
New and failed to create (got one in): http://deimos3.apple.com/WebObjects/Core.woa/Feed/mdanderson.org.3336851257.0333 6851263

ICloud Contact Groups Not Working on iPad

I made a contact list on iCloud.com via my Mac Book (OS X Yosemite). The groups I created there do not work with iPad Air 2 mail. They show up on the iPad, but I cannot send emails to my groups. What do I need to do to make groups work?

Maybe the backup is corrupted.
Turn off iCloud backup and try deleting the iCloud backup for the iPad.
iCloud: Remove an iOS device backup from iCloud - Support - Apple
Then turn it back on and try to backup.
You can also try removing your iCloud account from the device and then re-add it.
Note: This will cause you to lose everything but the last 30 days of photos in your My Photo Stream so take precautions.

Home sharing not working after update to iTunes 12.1

recenty updated iTunes to 12.1.0.71 64 bit for windows 8.1, and home sharing no longer works with my apple tvs. i have an apple tv 2 with software 7.0.3(6917) and an apple tv 3 aalso on 7.0.3(6917). I have tried the usual troubleshooting. Restoring, restarting, reinstalling itunes, made sure all the neccessary ports are open both on my router and firewall. Still not working. I would appreciate any help.

I have similar issue and already opened another thread for it...no reply so far. So I'll give it a try in here.
I'm using a Mac Mini (Mid 2010) with 4GB RAM, Yosemite 10.10.2.
The Mac is connected by cable to a Gbit Ethernet network switch.
I hope the following drawing helps to understand the network environment:
Mac <--> Switch_1 <--> Switch_2 <--> Fire TV
Switch_1 <--> WLAN Router AVM Fritz!Box 7270 <--> 30MBit Internet connection
The Mac and the Fire TV (running AirPlay server App) are both connected by Ethernet cable, but to different switches.
No WLAN enabled on Fire TV.
The WLAN router is the DHCP server.
For sure the remote App is running on an iPad (2) which is using WLAN.
All network addresses are in same network and were provided by same DHCP server (running on WLAN router).
All my music and internet radio is coming from the Mac.
I use remote app (latest version from Appstore) on the iPad to connect to iTunes 12.0.1.26 running on my Mac.
In iTunes I selected the Fire TV as AirPlay receiver.
Fire TV is playing all music through my AV receiver.
This is working perfectly fine except one issue which exists since update to Yosemite 10.10.0.
It remained same with Yosemite 10.10.1 and 10.10.2.
My problem is that I need to enable WLAN (wireless) on my Mac since update to Yosemite.
When I disable WLAN remote app does not find my media library anymore and iTunes is unable to connect to the Fire TV.
When I re-enable WLAN, everything is working fine again.
Remember, all devices except the iPad are on a cabled 1Gbit Ethernet.
Before updating to Yosemite I did not need WLAN.
Any idea what's causing this? IP traffic routing issue?
Usually, when I disable WLAN on the Mac, it continues to run for 1 or 2 days where the iPad has no problem to find and connect to the media library.
After a while. running with WLAN disabled, my iPad is not able to "see" the iTunes media library asking me to enable home sharing.
When I check on my Mac, home sharing is enabled.
I then disable and re-enabled home sharing in iTunes and after doing so my iPads is able to "see" the iTunes media library but it cannot connect to it.
I checked routing and arp tables on the Mac but everything looked fine, routing through the Ethernet interface.
I used "fing" on the iPad to see which devices are online and "fing" on my iPad was only aware of the Mac Ethernet interface. No entry for the disabled Mac WLAN interface.
I checked on the WLAN router and ensured that both Mac interfaces have unique host names (aliases) on the router.
To be sure everything is refreshed I rebooted the router.
No change, my iPad was able to find the iTunes media library through home sharing but was unable to connect to that media library.
So I enabled WLAN on the Mac and immediately my iPad could connect to the iTunes media library.
Weird...
Only mitigation I found so far is to re-enable the WLAN on the Mac.
So I assume something is broken in Yosemite / iTunes 12 home sharing.

Server Group not working when one of Job Servers is down

I have a Server Group of two job servers. They have the same version 12.2.2.3 and are attached to the same Local Repository of version 12.2.2.0.
When I execute a batch job (from the Designer) and explicitly specify on which job server it should run, it works fine for either job server. Also, when I specify Batch Job execution on Server Group, it works fine.
However, when I shutdown one of the Job Servers, and then try to execute the job on Server Group, I'm getting two error messages, BODI-1111011 that one Job Server is down, and BODI-1111009 that another Job Server has failed.
At the same time, when I check the Server Group in the Management Console, it shows that the allegedly failed Job Server is in the status green.
That error is not reflected in a job server eveng log, nor there is anything written to webadmin log, not in the job trace (the latter isn't created at all).
Is there anything I can do at this point except raise a support message?

The issue was with different users for Local Repository in Admin and Job Server config. I discovered it when trying to run the job from Admin Console. Designer is probably not the best diagnostic tool for such kind of issues.

Alert to group not working on Sharepoint 2010!

Hello,
We have a SharePoint 2010 Server which on the front page we have a news list. We have migrated to 365 and since then the alerts are not working properly. We have a local SMTP server that we use to rely to 365 since SharePoint does not support TLS by itself.
The SMTP server is working because we can set up alerts on individuals and the emails are coming. The issue is with the group. I have tried several groups but still the same issue. On some groups we receive the initial email about the creation of the alert,
but no mails after that. I have checked also the Immediate Alert service and is successful. I have checked in the mail flow on 365 and I can see the initial creation of the alert mail sent to all in the group, but the alerts on changing anything on the
list does not come into 365, so it must be a SharePoint issue which I can`t determine since the immediate alert service is running...
Can you please provide a feasible solution for this issue?
Thank you very much.
DOVC
Best Regards, Valentin Doru System Administrator

Hi Valentin,
please also open a thread at o365 community, because seems this issue happened at o365.
to try, perhaps you can re-add the group also, because it may refresh the properties from the AD group to o365.
and you may check these workaround for testing:
Option 1: Use a Redirection User
created a user in Office 365. This user is licensed to use SharePoint Online and Exchange Online.
In Exchange Online, create Distribution Groups, which are standard Distribution Group that allows however in Delivery Management also Senders outside of organization, as the SharePoint Sender is not part of the Exchange Org.
In Exchange Online for the User Exchange Forwarder, created Inbox Rules. The rule is checking the Subject for a keyword and as action redirect the E-Mail to the DG and deletes it right away.
repeat this for other DGs as well.
In SharePoint Online grant the user Exchange Forwarder access to the Site to access the List
Now there are two important steps:
1) The Alert Title needs to include the token we look for in the Exchange rule
2) The “Send Alerts To” needs to be our “Exchange Forwarder”
When everything is set up an Alert will be received by Exchange Forwarder and then forwarded to the DG.
Option 2: Use a custom Workflow with the Send E-Mail To Activity
In Exchange Online creat a Distribution Groups, which are standard Distribution Group that allows however in Delivery Management also Senders outside of my organization, as the SharePoint Sender is not part of the Exchange Org.
Using SharePoint Designer create a custom Workflow like the one below. In the Send E-Mail activity I specified the external SMTP Address of the DG as To-Address.
When the Workflow is executed an E-Mail is sent directly to the DG:
Background:
When sending an Alert, SharePoint is doing a Security Trimming. So SharePoint wants to be sure the recipient of the Alert has permissions to see the List Content the Alert is about. Therefore we cannot enter an SMTP-Address for an Alert but need to specify
a Security Principal known to SharePoint.
In a Workflow we don’t need to do this kind of Security Trimming. The creator / designer of the Workflow need to take care whom to send what information.
Side note: Alerts and Workflow Send E-Mail To Activities are the only possibilities in SharePoint Online to send E-Mails. Custom solutions (Sandboxed Solutions) will not work.
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Groups not working in apple mail

Hi,
Since the update to 19.9.1 mail groups began working again, but now they've stopped. It used to be I could enter the first few letters in the address field and either a person's or group's name would show up to be selected. Not groups don't show up anymore.
Any idea why?

Hi!
I have the same Problem... Did u try to delete the "Envelope Index"? ( got to Library/Mail/V2/... delete all files Envelope ... Close Mail before! and then restart Mail.)
I tried that but nothing happen... How tu use Mail without search feature!!
MacBook Pro late 2009, Mac OS Yosemite (10.10)

Groups not working on books in iTunes 12

Similar Messages

Maybe you are looking for