GRPO Report based upon item
Hello Experts,
I want a query, in which if i select any item and FromDate and ToDate..
For Ex:-
Item:- Item A
FromDate:- 04/01/2009
ToDate:- 12/31/2009
Then its should display all the GRPO No,GRPO Rate of that Item A between that FromDate and ToDate.
Regards,
AKM
Hi
here is ur query i think this will solve ur prob if so pls do close the thread
SELECT T0.[DocNum][PO NO], T2.[DocNum][GRPO NO], T2.[DocDate], T2.[CardCode], T2.[CardName], T3.[ItemCode], T3.[Dscription], T3.[Quantity], T3.[Price], T3.[LineTotal], T2.[DocTotal] FROM OPOR T0 INNER JOIN POR1 T1 ON T0.DocEntry = T1.DocEntry, OPDN T2 INNER JOIN PDN1 T3 ON T2.DocEntry = T3.DocEntry WHERE T3.[BaseRef] = T0.[DocNum] and T3.[ItemCode] = T1.[ItemCode] and T2.[DocDate] > = [%0] AND T2.[DocDate] < = [%1] and T2.[Series] =[%2] GROUP BY T0.[DocNum], T2.[DocNum], T2.[DocDate], T2.[CardCode], T2.[CardName], T3.[ItemCode], T3.[Dscription], T3.[Quantity], T3.[Price], T3.[LineTotal], T2.[DocTotal]
Regards
Jenny
Similar Messages
-
Data Selection for report based upon a 'Prompt Value'
I want to report information in my report based upon a 'user input prompt value'
for example:
'Enter Shareholder Selection - A-Active, I-Inactive, B-Both Active and Inactive'
if the user enters 'A', the report selects only active shareholders
if the user enters 'I', the report selects only inactive shareholders
if the user enters 'B' the report selects all shareholders, active and inactive
the field in the database that this based upon is their total share value.
if this field is greater than zero (>0) they are considerd 'active'
if this field is equal to zero (=0) they are considered 'inactive'.
I have tried creating some type of filter, but am not having any luck.
I saw a few examples within the forums that I have tried without any luck....unfortunately most of the examples I've seen are base one only two choices.
I'm sure I need to create some type of 'independant varible' but am not sure how to do that either.
Any suggestions would be appreciated.
Thanks.Hi Daryl,
I Tried this unsuccessfully in DESKI . We can't Eliminate Rows having Empty Measure Values or Measure with 0 as values using Table Level Filter as FIlter can't FIlter rows based on Prompt value selection dynamically. Filters filter rows at a time and not based on 3 condition as Active, Inactive and Both. thus filters are of no use.
I Tried this in WEBI, and it is working perfectly you donu2019t have to create any Object in Universe, you can do it using function UserResponse() at report level.
Hence if you are comfortable using WEBI for Generating this report then Follow the steps.
1. Create Report With Name and Shares Object. It will display all Shareholder Names and No.of shares they hold.
2. Use Status Object in Query filter, use condition as u201CEqual Tou201D and Select prompt. It contains Active, Inactive and Both as values.
3. Report will Display all Shareholder names and No. of shares like 45, 789, 0, 4562 where 0 is inactive Shareholder and all other are active shareholder.
4. Create Variable using Formula.
=If(UserResponse("Enter Status:")="Active" And [Shares]>0;[Shares];If(UserResponse("Enter Status:")="Inactive" And [Shares]<=0;[Shares];If(UserResponse("Enter Status:")="Both";[Shares])))
5. Remove Shares Object from the report and Put Variable created with Names of Shareholders.
6. Select Table-> Properties-> Display-> Uncheck the Option u201CShow Rows with Empty Measure Valuesu201D
7. Report will display Value correctly as per your Prompt value selection.
I Hope this Helpsu2026
Thanksu2026
Pratik -
Report based upon material type against movement type for a period ?
i need a inventory report which should be based upon materil type & movement type for a particular period.
For example- for last monthe how much Raw material has been issued againast production order. i would like report to allow me ROH and movement type 261/262 and period entry. MB5B does not satisfy my requirements, ist of all there si no material type/secondly it restricts itself if i use movement types
thanks
samHi,
You can create a small program to get report.
Input fields Date of posting BUDAT, Movement type BWART (Plant if required).
Check field BUDAT (Posting Date. Should check based on input date field.) In table MKPF.
If data falls in required date range. Pick MBLNR-MKPF (Mat doc number).
Go to table MSEG compare MBLNR-MKPF and MBLNR-MSEG if same pick field MATNR-MSEG (Mat number).
Go to MARA check MTART-MARA for picked MATNR-MARA (in previous step). Take the material type.
Add the below fields to out put
MATNR, MTART, BWART-MSEG (Movt type), ERFMG-MSEG (quantity posted), WERKS-MSEG (Plant received), LOGRT-MSEG (S. Loc received).
Please take advise from ABAPer regarding prog logic
Thank you,
Anand K -
Creating a performance report based upon a custom group
I am trying to create a simple performance report based on a SCOM group that I created, however when I run the report the relevant data cannot be found. When I look at the group membership I see a list of Windows servers. I then go into a generic
performance report, add a single chart, and line series, and select "Add group" and then search and select the SCOM group I created. I then add % processor time for 2008 systems as my rule. However when the report is run, no relevant
data is found. Performance reports run fine when selecting "Add group" and selecting the members of the group themselves.
My suspicion is that it is trying to run the performance report based on the group object and not the members of the group. Is there anyway that I can accomplish this? Perhaps via XML?
KeithHi,
For your reference:
Creating Useful Custom Reports in OpsMgr: How to create a custom performance counter report for a group of servers
http://www.systemcentercentral.com/creating-useful-custom-reports-in-opsmgr-how-to-create-a-custom-performance-counter-report-for-a-group-of-servers/
SCOM reports on performance counters for large groups of servers
http://www.bictt.com/blogs/bictt.php/2010/11/28/scom-reports-on-performance-counters-for-large-groups-of-servers
Regards,
Yan Li
Regards, Yan Li -
Commision based on item group & customer group
Dear all,
Does anyone have an idea about how to get commission based on item group & customer group sales?
My customer wanted commission report based on item group or customer group & based on payment collection dated.
Example
Term given for customer A is 30 days.
12/3/09 Inv 1000 RM 10,000 30 days payment
20/4/09 Inv 2000 RM 5,000 60 days payment
The term given is 30 days of the invoice month.
Salesman will get commission if get the collection at May'09 for Inv 1000, & July'09 for iinv 2000 based on the invoice date month.
The salesman get commission at any date of the month May'09. More longer collection, less commission they will get.
Example:
Salesman A
Customer Group 1st of the month, 2nd of the month, 3rd of the month, 4th of the month
Normal Dealer 1.5% , 0.75%, 0.00% , -0.25%
Sub Distributor 0.5% , 0.25%, 0.00% , - 0.25%
Any idea?
Thanks in advance?
Regards,
Eric TanHi Eric
SAP does not calculate commissions, but merely provide a mechanism to report on it. The multi level calculation you require can be achived with a custom query linked to a report layout. Standard SAP will not provide this type of calculation. You will need to look at the open transactions such as invoices and link to the relevant payment transaction to get the payment date. Then compare this date to the invoice due date to determine if the terms were adhered to or not. If not payment date - due date in number of days will be needed to calculate the effective commission percentage.
Kind regards
Peter Juby -
Non serial Invoice data based upon GRPO
Hello Experts,
I want to made report on non serial based items.
Means i want data based upon the following way.
Suppose GRPONo 400 have three items Item A, Item B and Item C.
and suppose Item C is non serial based item,
so i have to get sales data(A/R) of Item C for GRPONo 400 only not the different GRPONO of Item C.
Ex:-
GRPONO GRPODate ITEMCode ItemQty SaleInvoiceNO SaleInvoiceDate SaleInvoiceQty
400 12/12/2009 Item C 50 900 15/02/2010 30
600 12/02/2010 20
I want only those Invoice sales data which is actually raised against particular GRPONo.
Thanks,Hello Gordon,
Thanks for the reply.We are basically used FIFO method for items.
I can able to discover the solution of Serial based items from OSRI and SRI1 table.
But for non serial based items there is no way to discover that particular GRPO Item quanity has been sale against which Invoice NO???????
I want the sales data of Non serial items for particular GRPO Item quantity.
I want to show that particular GRPO qty is sold against which which invoices..
I hope you are more clear about my requirement.
Regards, -
R12: How to filter Open Item Revaluation Report based on GL Date
Hi,
Anybody know how to filter Open Item Revaluation Report based on GL Date from and GL Date to in R12?
Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
We need to run the report only for specific date only. Please share with me if anyone know about this.
Thanks.Pl do not post duplicates - R12: How to filter Open Item Revaluation Report based on GL Date
-
How to create a report based on selected item from Select list?
Hi,
I have created a tables_LOV based on:
select table_name d, table_name r from user_tab_cols
where column_name like '%_type%'
Then I created a page item ListOfTables, Display as select list and pointing to tables_LOV.
I run the page, and i can select the table i want from the drop down list.
How to create a report based on the selected item? (ex: select * from selected_table)
many thanks in advance
SalahHi Salah,
Allright, have a look at this page: http://apex.oracle.com/pls/apex/f?p=vincentdeelen:collection_report
I think that simulates what you're trying to accomplish. I've set up the simplest method I could think of.
The report is based on an apex collection. If you are not familiar with that, you should study the documentation: APEX_COLLECTION
To recreate my example you should:
1) create an (interactive) report on your collection
SELECT *
FROM APEX_collections
WHERE collection_name = 'MY_COLLECTION'
2) create a page_item select list for the tables you want to display (in my case this is called "P38_TABLES" )
3) create a dynamic action that triggers on change of your select list page_item. The dynamic action must be a PL/SQL procedure perfoming the following code:
declare
l_query varchar2(4000);
begin
l_query := 'select * from '||:P38_TABLES;
if apex_collection.collection_exists
( p_collection_name => 'MY_COLLECTION' )
then
apex_collection.delete_collection
( p_collection_name => 'MY_COLLECTION' );
end if;
apex_collection.create_collection_from_query
( p_collection_name => 'MY_COLLECTION'
, p_query => l_query
end;
Make sure you add your page_item to the "Page Items to Submit" section.
4) Add an extra true action that does a refresh of the report region.
Here are two pictures describing the da:
http://www.vincentdeelen.com/images/otn/OTN_COLLECTION_REPORT_DA1.png
http://www.vincentdeelen.com/images/otn/OTN_COLLECTION_REPORT_DA2.png
Good luck and regards,
Vincent
http://vincentdeelen.blogspot.com -
Report based on a ITEM (which has SQL statement)
Hi everyone,
I have a created a form based on a table which has 1 column that stores SQL statement in the database.And i am displaying the SQL statement in TEXT AREA FILED.
What i want to do is to create a report based on that SQL statement (Which is in the TEXT AREA field on the same page).I tried to create a report region with
:P25_SQL_STATEMENT.But i am getting an error
----->invalid query, no select statement found.
How can i do a report based on the item which has SQL query in it.
Thanks
phani
.Hi Jkallman,
Thanks for the reply.I have a (FORM WITH REPORT) on a table which has column of SQL_STMNT VARCHAR2(2000 BYTE) which takes the SQL statement entered from the FORM.
1.I have a report which shows all the records in the above mention table on page 10
2.If i hit the edit button in the report i go to page 11 which i have the FORM on the above mentioned table.In that form i have a field :P11_SQL_STMNT.
3.I am trying to create a report on the same page 11 based on the SQL query of that :P11_SQL_STMNT.
4.I did the follwoing steps
--> create a region
----> report
---->sql report
and entered the following code.
begin
return (:P11_SQL_STMNT);
end;
but it is giving me the error which i mentioned in the previous post.If u need any more details i can provide
Thanks in advance
phani -
Report based on mutually exclusive items:
Hi guys,
I am trying to create a parameterized report based on mutually exclusive items:
I have a Select List item "P1_Property_type" which has these values ( office , apartment ),
if 'office' is chosen then the report should consider ONLY the value of the select list item "P1_beds"
if 'apartment' is chosen then the report should consider ONLY the value of the select list "P1_size"
I used this query, but it does not seem to wrok:
select * from realestate where
unit_type = decode (:P1_PROPERTY_TYPE,'null',unit_type,:P1_property_type)
and
( br= decode (:P1_beds,'null',br,:P1_beds) or size= decode (:P1_size,'null',size,:P1_size) )----------------
I hope my question is clear
Regards,
FatehAssuming you're using the string literal 'null' rather than NULL.
"it does not seem to work" because of this:
( br= decode (:P1_beds,'null',br,:P1_beds) or size= decode (:P1_size,'null',size,:P1_size) )Assuming you pick "office" and :p1_beds is set and :p1_size is 'null', you end up with a statement that is the equivalent of:
select * from realesate
where unit_type = 'office'
and (br = :p1_beds
or size=size) <--------------problemand your :p1_beds restriction is then ineffective.
I'm not a fan of decode to do this logic.
I prefer a clear statement of exclusive predicates which the optimizer can sometimes deal with more effectively.
e.g. assuming that it's irrelevant whether you pick office or appartment because the relevant parameter :p1_beds or :p1_size will be set appropriately:
select * from realestate
where
(:p1.property_type is null / = 'null'
or (:p1.property_type is not null / != 'null'
and unit_type = :p1_property_type))
and (:p1_beds is null / = 'null'
or (:p1_beds is not null / != 'null'
and br = :p1_beds))
and (:p1_size is null / = 'null'
or (:p1_size is not null / != 'null'
and size = :p1_size))Note that I've provided alternatives depending on whether you're actually using NULL or a magic string. -
Variant Pricing _ each item price based upon main item.
Hello,
I request your help for inputs on Variant Pricing functionality for given scenario.
Each material will have different price based upon different brand / main item.
For example u2013 Inbuilt-Sat Nav will be priced different in Toyota Prius & Toyota Avensis.
Let say, we have 2 products (Toyota Prius & Toyota Avensis.) each having 10 different options/ items which are charged separately.
Hence would like to know how we can set up the price in variant based upon Main item & sub item.
Toyota Prius / Customer / InBuilt Sat Nav = £1200
Toyota Avensis / Customer / InBuilt Sat Nav = £1500
Your inputs are appreciated.
Thanks & best regardsIf you want to maintain seprate prices for each variants go to VK11 use the following condition types -
VA00: this condition type expresses an absolute amount.
u2013 VA01: this condition type expresses the surcharge/discount as a percentage
above are based on sales org, material and variants combination, so as you said you requirement is based on customer will charge different prices, so create new condition table with customer combination and add in to same access sequesnce and condtion type.
For more details check the below link:
http://www.sap-img.com/sap-sd/steps-for-sd-variant-configuration.htm
regards
Satish -
WebI report based on Universe upon SAP BEx Queries:Prompt issue
Hi,
I am creating Web Intelligence report using Universe based on SAP Bex Queries. In WebI report I created a filter condition as I need to run report based on two specidc dates. I need to schedule report to run 2nd of every month to show data for last month. At present I have the following filter : date between 'Start Date' and 'End Date'. 'Start Date' should always be 'first date of previous month' and End Date be always must be 'Last date of previous Month'. How to do this. The solution I thought would be to create variables at report/universe level ('first date of previous month' and 'Last date of previous Month') and use in the filter using 'Object from this Query' option.But this 'Object from this Query' option is missing in the prompt.Is there any work around to achieve this.? Could you please help me.
Nanda KishoreHi all,
I have a related question too.
I have 2 queries and need a Combined BEx query written on this for reporting. (WebI)
In the 2 queries, there is a Field which needs to be restricted.
But this field should not be restricted in the Combined BEx query.
So I thought of restricting the Field at the report level. But in this case, the user gets a prompt to enter a value for the field.
And this is not desirable as per the requirement.
COuld you please tell me if there is another way of handling this without the user being prompted to enter a value while the report is being run, but still I need selection at the Field level.
Thanks and Regards,
Srilakshmi B -
Hi
I'm trying to come up with query report to show Inactive Item bought within a specific period and not sold within a specific period by whse and have stock
The report should show Item Number, Item Name ,Item cost,Retail Price [Based on a price list], Qty in Whse, Last Purchase Date, Last sale Date etc.
e.g item bought between 2011-2013 and have not been sold with the same date range or the last 12 months.
Regards
Brian Ndunda.Hi,
Try this query:
SELECT T0.[ItemCode], T0.[ItemName], T0.[OnHand], T0.[AvgPrice], T0.[LastPurPrc], T0.[LstSalDate] FROM OITM T0 left JOIN INV1 T1 ON T0.ItemCode = T1.ItemCode left JOIN OINV T2 ON T1.DocEntry = T2.DocEntry WHERE T1.[Quantity] is null and T0.[OnHand] >0 GROUP BY T0.[ItemCode], T0.[ItemName], T0.[OnHand], T0.[AvgPrice], T0.[LastPurPrc], T0.[LstSalDate]
Thanks & Regards,
Nagarajan -
Sales Analysis Report based on Supplier-wise
Hi Experts,
My client requirement is ,We are into trading so , we want a Sales analysis report based on Supplier-wise. like,
Selection critieria is
1)Supllier name
2)From and To date.
Heading are
Item name Sales UoM Jan(quantity) Feb(quanitity) mar(quantity) April(quanitiy).........
here, i need only the sum of the quantity for the items for that particular month based on the date giving in selection criteria.
Regards,
Dwarak
Edited by: Dwarak@SMS on Aug 23, 2010 4:29 PMHi experts,
For my clients requirement,
I could able to alter my previous query(find below).
My object is
1)To get sales report based on Manufacturer.
2)To get the TOTAL SALES QUANTITY OF THE MONTHS in the report. I go that in the below query, and only thing is that is have to minus the total Credit note for items to get the ACTUAL TOTAL SALES OF THE MONTHS. so , can anyone help me to alter the query to get me the ACTUAL TOTAL SALES OF THE MONTHS.
the query is
SELECT T0.ITEMCODE,T0.ItemName,T0.OnHand,
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 1 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'JAN ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 2 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'FEB ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 3 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'MAR ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 4 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'APR ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 5 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'MAY ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 6 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'JUN ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 7 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'JUL ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 8 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'AUG ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 9 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'SEP ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 10 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'OCT ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 11 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'NOV ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 12 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'DEC '
FROM dbo.OITM T0
LEFT JOIN dbo.INV1 T1 ON T1.ItemCode = T0.ItemCode WHERE T0.SellItem = 'Y' and T0.[FirmCode] =[%0]
GROUP BY T0.ItemCode,T0.Itemname,T0.OnHand,YEAR(T1.DOCDATE) HAVING YEAR(T1.DOCDATE) =
YEAR(GETDATE())-0
ORDER BY T0. ITEMCODE -
Derive values based upon user input
Hello,
I recieved a request for a report.
When a user runs the report they are to be prompted for a fiscal year/period.
Based on the fiscal year/period that the user provides I have the following columns (in bold below are 2 examples that may make the description more clear).
1. Revenue for the Fiscal year Prior to the fiscal year of the user input value
2. Revenue for the Fiscal year/Period prior to the input Fiscal year/period
3. Revenue for the Year to date accumulation up to the prior fiscal year/period that the user input
4. Revenue for the Year to date accumulation up to the prior fiscal year (fiscal year rolls back first) and prior period (for period 01, it then rolls back the fiscal year 1 more year) that the user input
Example 1: If the user ran the query and they provided the value 05/2007, then the values that need to be obtained would be:
1. Revenue for 2006
2. Revenue for 04/2007
3. Revenue for 01/2007 to 04/2007
4. Revenue for 01/2006 to 04/2006
Example 2: If the user ran the query and they provided the value 01/2008, then the values that need to be obtained would be:
1. Revenue for 2007
2. Revenue for 12/2007
3. Revenue for 01/2007 to 12/2007
4. Revenue for 01/2006 to 12/2006
Please help me with determining how to obtain the user input value, and then how to derive the time periods for the columns based upon that value.
Thanks,
Nick
(points available)
Edited by: Nick Bertz on Mar 13, 2008 9:43 AMHello,
See my example.. I am reading the value from Keydate Variable
WHEN ZVND01
READ TABLE i_t_var_range INTO w_var_range WITH KEY vnam = 'Keydate'.
IF SY-SUBRC = 0.
CLEAR l_s_range.
l_date = w_var_range-low.
concatenate l_date(6) '01' into l_first_date.
CALL FUNCTION 'SLS_MISC_GET_LAST_DAY_OF_MONTH'
EXPORTING
day_in = l_date
IMPORTING
last_day_of_month = l_last_date
EXCEPTIONS
day_in_not_valid = 1
OTHERS = 2.
IF sy-subrc EQ 0.
l_s_range-low = l_first_date.
l_s_range-high = l_last_date.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_between.
APPEND l_s_range TO e_t_range.
ENDIF.
Hope this example helps..
Maybe you are looking for
-
In my preferences I marked that the day starts at 6am and ends at 10pm but iCal is still showing 24hours. Is there a way to hide unnecessary times so I don't have to scroll down my calendar? Thanks!
-
How to set local file copy buffer size?
Is there any sysctl parameter or any other mechanism to set or change file copy buffer sizes? I'm backing up a huge number of files to a local hard drive connected by firewire, and I'd like to play with file copy buffer sizes for the best performance
-
CONNECTION_REFUSED - Apache and WebLogic
Hi guys, My environment is the following: - Apache 2.2. with mod_weblogic loaded - The Apache is setup in a Microsoft Cluster with the IP 10.100.5.227 - The configuration for load balancing is the following: WebLogicCluster 10.100.5.200:18005,10.100.
-
Bitmap indexes generated by procedure dbms_odn.createdimmv_gs
I run the procedure dbms_odn.createdimmv_gs for the dimension products_dim of schema sh, and I have the creation of the following index: CREATE BITMAP INDEX MV_PRODU_PROD__OLAP_PREL_FI ON PRODU_PROD__OLAP ( (CASE SYS_OP_PARGID(GID, PROD_TOTAL, PROD_C
-
i cant get rid of the other users ID, i have tired to remove this id many many times, it will let me use my ID to do updates but it will nto let me do the updates associated that id the original user. any ideas