Creating a performance report based upon a custom group

I am trying to create a simple performance report based on a SCOM group that I created, however when I run the report the relevant data cannot be found. When I look at the group membership I see a list of Windows servers. I then go into a generic
performance report, add a single chart, and line series, and select "Add group" and then search and select the SCOM group I created. I then add % processor time for 2008 systems as my rule. However when the report is run, no relevant
data is found. Performance reports run fine when selecting "Add group" and selecting the members of the group themselves.
My suspicion is that it is trying to run the performance report based on the group object and not the members of the group. Is there anyway that I can accomplish this? Perhaps via XML?
Keith

Hi,
For your reference:
Creating Useful Custom Reports in OpsMgr: How to create a custom performance counter report for a group of servers
http://www.systemcentercentral.com/creating-useful-custom-reports-in-opsmgr-how-to-create-a-custom-performance-counter-report-for-a-group-of-servers/
SCOM reports on performance counters for large groups of servers
http://www.bictt.com/blogs/bictt.php/2010/11/28/scom-reports-on-performance-counters-for-large-groups-of-servers
Regards,
Yan Li
Regards, Yan Li

Similar Messages

Data Selection for report based upon a 'Prompt Value'

I want to report information in my report based upon a 'user input prompt value'
for example:
'Enter Shareholder Selection - A-Active, I-Inactive, B-Both Active and Inactive'
if the user enters 'A', the report selects only active shareholders
if the user enters 'I', the report selects only inactive shareholders
if the user enters 'B' the report selects all shareholders, active and inactive
the field in the database that this based upon is their total share value.
if this field is greater than zero (>0) they are considerd 'active'
if this field is equal to zero (=0) they are considered 'inactive'.
I have tried creating some type of filter, but am not having any luck.
I saw a few examples within the forums that I have tried without any luck....unfortunately most of the examples I've seen are base one only two choices.
I'm sure I need to create some type of 'independant varible' but am not sure how to do that either.
Any suggestions would be appreciated.
Thanks.

Hi Daryl,
I Tried this unsuccessfully in DESKI . We can't Eliminate Rows having Empty Measure Values or Measure with 0 as values using Table Level Filter as FIlter can't FIlter rows based on Prompt value selection dynamically. Filters filter rows at a time and not based on 3 condition as Active, Inactive and Both. thus filters are of no use.
I Tried this in WEBI, and it is working perfectly you donu2019t have to create any Object in Universe, you can do it using function UserResponse() at report level.
Hence if you are comfortable using WEBI for Generating this report then Follow the steps.
1. Create Report With Name and Shares Object. It will display all Shareholder Names and No.of shares they hold.
2. Use Status Object in Query filter, use condition as u201CEqual Tou201D and Select prompt. It contains Active, Inactive and Both as values.
3. Report will Display all Shareholder names and No. of shares like 45, 789, 0, 4562 where 0 is inactive Shareholder and all other are active shareholder.
4. Create Variable using Formula.
=If(UserResponse("Enter Status:")="Active" And [Shares]>0;[Shares];If(UserResponse("Enter Status:")="Inactive" And [Shares]<=0;[Shares];If(UserResponse("Enter Status:")="Both";[Shares])))
5. Remove Shares Object from the report and Put Variable created with Names of Shareholders.
6. Select Table-> Properties-> Display-> Uncheck the Option u201CShow Rows with Empty Measure Valuesu201D
7. Report will display Value correctly as per your Prompt value selection.
I Hope this Helpsu2026
Thanksu2026
Pratik

Unable to Create a QBE report based on View

I have a view which is based on 4 tables.
The view by itself works fine.When I create a QBE report based on that view it gives the
ORA-01445: cannot select ROWID from a join view without a key-preserved table (WWV-11230).
I am not able to understand what I'm doing wrong.Please help!
Thanks,
Hyma.
null

Its simple if its a view on one table, but you have a view based on 4 tables. That is what makes it complicated and the need for special set up and a little research. I don't remember what all goes into it, but I do recall that its not just as simple as creating the view.

Sale Item Price Based On BP Customer Group

Hi,
We have SAP B1 2007A.
We have different customer groups like : Member, Non Member, Distributors.
I want to have a different price list for each Customer based on the customer group they belong to.
In other words, the same ITEM has a different price based on the customer group.
Any way to do that?
Mike

Mike,
This is what you can do -
1. Create a "BASIC PRICE LIST" for the item first.
2. For each customer (since the relation of Price lists has to be defined at this level not customer group), you can create a new price list but link it to the "BASIC PRICE LIST" you created in step 1.
So for ex - if CUSTOMER GRP A has to be sold at a discount of 10%, then in your customer price list definition, enter factor as 0.9 and link it to the "BASIC PRICE LIST".
Since one customer can be defined only within one group at a time, you can have the same effect of having the price list defined on customer groups. Only that, if your group pricing changes, you will have to either modify the price list, or create a new price list and link it all your customers (of a particular group) once again.
Hope this helps.
Cheers

Report based on a reord group - PROBLEM

Using Reports Server / Forms/Reports 6i
I am trying to run a report based on a record group on the web. It fails giving the error 'Cannot run report.'
The report is called from a form and the record group is passed as a data parameter. It works fine in Client/Server.
I have tried to remove the data parameter and run the report without it but, despite working in the Client/Server environment, it still fails on the Web.
Does anyone have any suggestions?

I have found the answer to my problem in the forms forum!
Apparently, this type of report won't work on the web and I have to use temporary tables!

Report based upon material type against movement type for a period ?

i need a inventory report which should be based upon materil type & movement type for a particular period.
For example- for last monthe how much Raw material has been issued againast production order. i would like report to allow me ROH and movement type 261/262 and period entry. MB5B does not satisfy my requirements, ist of all there si no material type/secondly it restricts itself if i use movement types
thanks
sam

Hi,
You can create a small program to get report.
Input fields Date of posting BUDAT, Movement type BWART (Plant if required).
Check field BUDAT (Posting Date. Should check based on input date field.) In table MKPF.
If data falls in required date range. Pick MBLNR-MKPF (Mat doc number).
Go to table MSEG compare MBLNR-MKPF and MBLNR-MSEG if same pick field MATNR-MSEG (Mat number).
Go to MARA check MTART-MARA for picked MATNR-MARA (in previous step). Take the material type.
Add the below fields to out put
MATNR, MTART, BWART-MSEG (Movt type), ERFMG-MSEG (quantity posted), WERKS-MSEG (Plant received), LOGRT-MSEG (S. Loc received).
Please take advise from ABAPer regarding prog logic
Thank you,
Anand K

WIS 10901 error when creating a webi report based on OLAP unv (SSAS 2005)

Hi,
I'm using two VM.
Machine A is running SSAS 2005. I'm able to create SSAS cube. Everything is ok
Machine B is runing BO XIR3.1. I'm able to create webi report on relational DB without any problem or opening samples.
Both VM machines are on the same custom network and I'am able to ping both. SQL managment server studio is installed on both machines. I'm able to manage SSAS from B also and not only from A.
Creating unv with BO designer on machine B is OK, connexion is runing and universe has been created and published on the BO server
But when I create a webi report from B, using my OLAP unv based on SSAS located on machne A I recieve following error message :
Une erreur de base de données s'est produite. Le message d'erreur est le suivant : . (WIS 10901)
thanks for your help,
Nicolas

Hi
Ya I used SAP authentication - then also get same error.
Connections are created with username, password to access SAP Source
Thanks!
J>M>Raj
Edited by: John Milton on Jun 25, 2009 10:03 AM

Could you restrict purchase orders based upon Vendor / Material Group?

Hey everyone - I've got a general "could this be done" kind of question.
We would like to add on to the vendor purchasing view to include "valid" material groups. This would then have what material groups could be purchased for which company code for that vendor. Then in the purchase order creation / modification we would like to be able to validate this purchase order against this vendor / company code / material group combination.
Obviously with enough custom code this could be done. My question is whether it could be done without out introducing too much custom code - how would you construct such a solution to this problem?
We are a SAP 4.7 shop.
Thanks!   Ken Little

>
Ken Little wrote:
> Hey everyone - I've got a general "could this be done" kind of question.
>
> We would like to add on to the vendor purchasing view to include "valid" material groups. This would then have what material groups could be purchased for which company code for that vendor. Then in the purchase order creation / modification we would like to be able to validate this purchase order against this vendor / company code / material group combination.
>
> Obviously with enough custom code this could be done. My question is whether it could be done without out introducing too much custom code - how would you construct such a solution to this problem?
>
> We are a SAP 4.7 shop.
>
> Thanks!   Ken Little
By include "valid" material groups i think it means you are introducing a new field or some value in already existing field in vendor master.
1) Now to restrict PO based upon material group a small custom code is needed.
    Use BAdI ME_PROCESS_PO_CUST....here write a code with help of your ABAP person that system will first select the
    LIFNR (vendor code) entered in the PO...then it will check the same LIFNR in LFM1 table...here it will check the material
    group in the customized field & if found that it is within the list of previous listed material group then it will allow to process
    further or otherwise give a customized error message.
or
2) Use the field Group in OMSF...here maintain a common group against the material groups you want to do the purchase cycle.Now ask your BASIS person to use this group in carry out a specific activity, the user must have authorization for the combination of the activity and the authorization group.
Regards,
Indranil

Create a Bex report based on the client requirement

Hi Experts
We are using 3.5 version SAP BW.
Our Client requirement is to create a report. as below
CC01 Qty Ltr Ripple xxxxx.xx
CC01 Qty Ltr Ripple xxxxx.xx
CC01 Qty Ltr Ripple xxxxx.xx
CC01 Profit Value Ripple xxxxx.xx
CC01 Profit Value Ripple xxxxx.xx
CC01 Profit Value Ripple] xxxxx.xx
Where CC01 is Company Code
QTY Ltr is the formula value that i have created for them
Profit value also is the formula that i have created
Ripple is the value that they want it to be seen in the reprot as a standard which is not available anywere in the multiprovider
xxxxx.xx are the total values of Qty LTr and Profit values per month (eg: 01.2011)
I have created the reprot and able to get the values but i do not get the CC01 for every line, and even Qty Ltr or the Profit Value in every line of the report , And i do not know how to hard code the Ripple.
Please adivice hope i am clear.
My repot displays this way. may be based on the company code.
CC01 Qty Ltr Ripple xxxxx.xx
xxxxx.xx
xxxxx.xx
Profit Value Ripple xxxxx.xx
xxxxx.xx
xxxxx.xx
CC23 Qty Ltr Ripple xxxxx.xx
xxxxx.xx
xxxxx.xx
Profit Value Ripple xxxxx.xx
xxxxx.xx
xxxxx.xx
CC09 Qty Ltr Ripple xxxxx.xx
xxxxx.xx
xxxxx.xx
Profit Value Ripple xxxxx.xx
xxxxx.xx
xxxxx.xx
Thanks Regds
Sri

With the code, you've presumably logged on to the database. To insert objects on to a new report you'd want to use code along the following lines:
private void AddTableFromDataSet(ref CrystalDecisions.CrystalReports.Engine.ReportDocument rpt, System.Data.DataSet ds)
ISCDReportClientDocument rasReport = rpt.ReportClientDocument;
// Convert the DataSet to an ISCRDataset object (something the ISCDReportClientDocument can understand)
CrystalDecisions.ReportAppServer.DataDefModel.ISCRDataSet rasDS;
rasDS = CrystalDecisions.ReportAppServer.DataSetConversion.DataSetConverter.Convert(ds);
// Add the dataset as a data source to the report
rasReport.DatabaseController.AddDataSource((object)rasDS);
// Add a field to the report canvas
// Note: This is quick and dirty. No positioning, resizing, formatting, etc.
CrystalDecisions.ReportAppServer.Controllers.ISCRResultFieldController rfc;
CrystalDecisions.ReportAppServer.DataDefModel.ISCRTable crTable;
CrystalDecisions.ReportAppServer.DataDefModel.ISCRField crField;
rfc = rasReport.DataDefController.ResultFieldController;
crTable = rasReport.Database.Tables[0];
crField = crTable.DataFields[2]; // Hardcoded field "Customer Name" in the Customer table from Xtreme Sample Database
rfc.Add(-1, crField);
// Save the report template to disk (without data)
//object path = @"c:\documents and settings\administrator\desktop\";
//rasReport.SaveAs("test.rpt", ref path, 0);
//MessageBox.Show("Done!");
For more info, see sample apps on the following link:
http://wiki.sdn.sap.com/wiki/x/IgBmBQ
Also, consult your 'Report Application Server .NET SDK Developer Guide" and "Report Application Server .NET API Guide". I'd provide the appropriate links, but you do not mention the version of CR you are using...
Thread moved to the '.NET - SAP Crystal Reports" forum.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Document created in a workflow based on a custom template is empty

Hello,
we have a big issue creating a document based on a defined custom template in a workflow. The following steps were made to achieve that:
1. Adding a custom document type in Website Settings
2. Creating an Excel file and uploading it as a template
3. Allowing custom types for document list
4. Adding the type to my document list as default
Site Wokflow:
1. Create Action: Create list item with the created document type and Name "test"
When i run the workflow, SharePoint creates the document but the document is empty. If I create a document manually in the same document list, the document is created fine.
These steps were performed in several tutorials with older SP Versions. So what happened in SP 2013?
Thank you for help

Hi Victoria Xia,
I checked them again, the Template is specified in the content type of the document library, the workflow is creating a document using that content type, and will bring all the metadata as mapped in the workflow.
but when I open the document created by the workflow it will be blank document, and the content type name is the correct content type (my custom content type) it is like its not using the template specified.
when I click new document inside the library itself directly, it is opening a new document with the specified template.
where could be the issue here?
Thanks

How to create dynamic Invoice report based on Tax calculations

Hi Ppl,
I have an invoice report requirement. There are multiple line items in invoice and each line item will have a tax % and discount associated with it. Discount has to be applied at line item level. Tax will be applicable on resultant amount which respect to tax share on total amount. Below is example
Part# Tax     Qty     UnitPrice Amount     Discount     Net Value
1     12.5%     40     10          400          100          300
2     12.5%     50     20          1000          200          800
3     4%     10     30          300          50          250
                         SubTotal                    1350
                         VAT 12.5% on 1100(300+800)     137.50
                         VAT 4% on 250               10
                         Total Amount               1497.5
I have created a static rtf which does all calculations correctly. I have hardcoded 12.5 and 4 % tax values for calculations. But issue is that taxes are changeable in future so I want to create dynamic template which takes care for tax calculations. I thought of to create an array to store distinct tax values from XML data and then to perform calculation but don’t know how to do that.
Can some body help me out as this is very critical and urgent?
Note: Tax calculation can be done at line item level itself but there are some scenarios where additional discounts are there so tax calculation can not be done at line item level.
Below is the sample XML data
<?xml version="1.0" encoding="UTF-8" ?>
- <ListOfBipActionTest>
- <Action>
<AccountId>1</AccountId>
<PartName>17211KCC900LS</PartName>
<TAX>12.5</TAX>
<QTY>40</QTY>
<UNITPRICE>47.06</UNITPRICE>
<DIS>15.00</DIS>
<TaxType>CST</TaxType>
</Action>
- <Action>
<AccountId>2</AccountId>
<PartName>17213KCC900LS</PartName>
<TAX>12.5</TAX>
<QTY>50</QTY>
<UNITPRICE>19.53</UNITPRICE>
<DIS>8.00</DIS>
<TaxType>CST</TaxType>
</Action>
- <Action>
<AccountId>3</AccountId>
<PartName>28302KAG900S</PartName>
<TAX>12.5</TAX>
<QTY>50</QTY>
<UNITPRICE>59.49</UNITPRICE>
<DIS>15.00</DIS>
<TaxType>CST</TaxType>
</Action>
- <Action>
<AccountId>4</AccountId>
<PartName>2830AKAG900S</PartName>
<TAX>12.5</TAX>
<QTY>10</QTY>
<UNITPRICE>168.7</UNITPRICE>
<DIS>15.00</DIS>
<TaxType>CST</TaxType>
</Action>
- <Action>
<AccountId>4</AccountId>
<PartName>91001GF6000S</PartName>
<TAX>4.00</TAX>
<QTY>60</QTY>
<UNITPRICE>115.34</UNITPRICE>
<DIS>17.00</DIS>
<TaxType>CST</TaxType>
</Action>
</ListOfBipActionTest>
Thanks
Ashish

Dear Efstratios Kara,
I installed SAP Integration Kit 3.1. Yes I installed the integration kit after installing CR.
I have uninstalled the earlier version and i have reinstalled CR with (12.3.0.601) version.
But still i cant view the SAP connectivity. can u tell me from which version they have included this connectivity option in CR.
If CR going to support SAP Table connectivity on specific version, what is that version.
Waiting for your reply.
Regards,
Suman

Create Application performance report

All,
iam trying to implement analytical/graphical/chart report to show the performance of the application at different times/pages. What is the best approach to this? thanks in advance.

Hello,
Here is the query which you can use to get similar report like what you get in APEX Admin - Performance Dashboard
select application_id,
       page_id,
       substr((select application_name
                 from apex_applications
                 where application_id = q.application_id),1,30) application_name,
       substr((select page_name
                 from apex_application_pages
                 where page_id = q.page_id
                 and application_id = q.application_id),1,30) page_name,
       page_events,
       median_elapsed_time,
       page_events * median_elapsed_time weighted_cost
from
select application_id,
       page_id,
       count(*)                 page_events,
       median(elapsed_time)             median_elapsed_time,
       median(elapsed_time)*count(*)    weighted_median
from apex_workspace_activity_log l
where seconds_ago <= NVL(:P4_SECONDS,10800)
group by application_id, page_id
order by 5 desc
) qBy Default, it gets the data for last 3 hours. If you want to get more older data, just change the value of item :P4_SECONDS (Similar to Select list in APEX Performance Dashboard) :D
Regards,
Hari
P.S. Taken query from APEX Internal App - 4350, Page - 78 and modified.

How to create a crystal report based on SAP R3 Tables????????????

Dear All!!!!!!!!!!!
I am new to SAP BO crystal reports.
I want to extract the data from SAP R3 tables and design the crytal report. When i tried to make a new connection;
We have lot of connection as OLAP;OLE DB and etc, I am not sure how to establish a connection between R3 tables and crystal reports. I cannot able to find documents too...
Is there any documents available to make the connection or can anyone help me out to figure this..........
Thanks in advance.
Regards,
Suman.

Dear Efstratios Kara,
I installed SAP Integration Kit 3.1. Yes I installed the integration kit after installing CR.
I have uninstalled the earlier version and i have reinstalled CR with (12.3.0.601) version.
But still i cant view the SAP connectivity. can u tell me from which version they have included this connectivity option in CR.
If CR going to support SAP Table connectivity on specific version, what is that version.
Waiting for your reply.
Regards,
Suman

GRPO Report based upon item

Hello Experts,
I want a query, in which if i select any item and FromDate and ToDate..
For Ex:-
Item:- Item A
FromDate:- 04/01/2009
ToDate:- 12/31/2009
Then its should display all the GRPO No,GRPO Rate of that Item A between that FromDate and ToDate.
Regards,
AKM

Hi
here is ur query i think this will solve ur prob if so pls do close the thread
SELECT T0.[DocNum][PO NO], T2.[DocNum][GRPO NO], T2.[DocDate], T2.[CardCode], T2.[CardName], T3.[ItemCode], T3.[Dscription], T3.[Quantity], T3.[Price], T3.[LineTotal], T2.[DocTotal] FROM OPOR T0 INNER JOIN POR1 T1 ON T0.DocEntry = T1.DocEntry, OPDN T2 INNER JOIN PDN1 T3 ON T2.DocEntry = T3.DocEntry WHERE T3.[BaseRef] = T0.[DocNum] and T3.[ItemCode] = T1.[ItemCode] and T2.[DocDate] > = [%0] AND T2.[DocDate] < = [%1] and T2.[Series] =[%2] GROUP BY T0.[DocNum], T2.[DocNum], T2.[DocDate], T2.[CardCode], T2.[CardName], T3.[ItemCode], T3.[Dscription], T3.[Quantity], T3.[Price], T3.[LineTotal], T2.[DocTotal]
Regards
Jenny

How to generate a list of Devices based upon an eDir group

Is there a way for us to generate a report/query of devices (we need model, etc) where the calculated user for each device is a member of an eDirectory group?
Basically, we need to generate a list of machines in our "HR" department or "Finance" department, etc.
Any clever ideas?
-Brian

bpedrant,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Creating a performance report based upon a custom group

Similar Messages

Maybe you are looking for