GSSAPI Error Another one

Hello All
I'm having a problem to login on my MacServer since yesterday when we got new connection and I had to change my DNS configuration.
No one can login, and on logs I got this error messages
To give a brief explanation about the problem, the server has 3 network interfaces 1 for external access (internet) and 2 for our internal networks. So with the new internet connection I had to change the external interface's IP address. So I've also changed it on the DNS (as you can see on the log before it was 172.16.XX.XX). But after that nobody can login.
System Log
+DirectoryService[61]: GSSAPI Error: Miscellaneous failure (Server not found in Kerberos database)+
Kdc Log
+Jun 18 10:50:09 server.domain.com krb5kdc[242](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 81.145.128.82: ISSUE: authtime 1213782609, etypes {rep=16 tkt=16 ses=16}, [email protected] for krbtgt/[email protected]+
+Jun 18 10:50:10 server.domain.com krb5kdc[242](info): TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 81.145.128.82: UNKNOWN_SERVER: authtime 1213779829, [email protected] for ldap/[email protected], Server not found in Kerberos database+
Kadmin command
+sudo kadmin.local -q listprincs | grep ldap+
ldap/[email protected]
My DNS Zone
+$TTL 86400+
+domain.com. IN SOA server.domain.com. sysadmin.domain.co.uk. (+
+2008061818 ; serial+
+3h ; refresh+
+1h ; retry+
+1w ; expiry+
+1h ) ; minimum+
+domain.com. IN NS server.domain.com.+
+domain.com. IN A 99.99.999.99+
+server IN A 99.99.999.99+
Inside my /Library/Preferences I've got 2 edu.mit.Kerberos files
edu.mit.Kerberos
edu.mit.Kerberos.UrLRdkjIuH7V7yG2QuH8e
One of them (the UrL*) is empty the other one has this configuration
+# WARNING This file is automatically created, if you wish to make changes+
+# delete the next two lines+
+# autogenerated from : /LDAPv3/127.0.0.1+
+# generation_id : 1093139664+
[libdefaults]
+default_realm = SERVER.DOMAIN.COM+
[realms]
+SERVER.DOMAIN.COM = {+
+kdc = server.domain.com+
+admin_server = server.domain.com+
[domain_realm]
+domain.com = SERVER.DOMAIN.COM+
+.domain.com = SERVER.DOMAIN.COM+
[logging]
+admin_server = FILE:/var/log/krb5kdc/kadmin.log+
+kdc = FILE:/var/log/krb5kdc/kdc.log+
I've read all the topics about it but till now I couldn't solve my problem.
Is anyone able to help me?
Thanks

I even tried the online support option using my PlayBook's serial number; when I entered my email address, it said that it failed to recognise it.
Yet in the tablet it clearly shows the right one.
I am beginning to have serious doubts about having bought it in the first place.
Techie Charlie.
Trying to stay loyal to BlackBerry.
Currently using BBM on my Android Motorola Moto G

Similar Messages

  • Hi, im getting an error message, "expected identifier"  and another one, "expected expression" when i try a c   program in xcode

    hi, im getting an error message, "expected identifier"  and another one, "expected expression" when i try a c   program in xcode

    You have errors in your C code. If you want anyone to be able to help you, you need to post the code. You also should tell us the version of Xcode you're using and the type of Xcode project you created for the C program.

  • GSSAPI Error: Server not found in Kerberos database

    Hi all
    For about 3 days I'm now seeing this error message in system.log every 3 minutes:
    DirectoryService: GSSAPI Error: Miscellaneous failure (Server not found in Kerberos database)
    This happens on a fileserver which is connected to an OD server.
    I did a search in this forum and found one thread about it. The advice there was to look in kdc.log to see which principal is failing - but I don't have a kdc.log. The other tip was to use kadmin to get a list of the principals by using
    kadmin.local -q listprincs
    but what I get instead of this list is:
    Authenticating as principal xyz/[email protected] with password.
    kadmin.local: No such file or directory while initializing kadmin.local interface
    It seems that some file is missing, which would explain why DirectoryService can't find the server in the database... I have to confess that I have no idea as to how Kerberos works or how to configure it.
    Authentication against the OD server is working fine, it's just that the errors in the log are getting on my nerves, and they make it difficult to find other, more important messages in system.log.
    Thankas, Tina

    Ah, I see, the kdc.log is on the OD server, not on
    the file server where I was looking for it.
    OK, in the kdc logfile I have a lot of entries like
    these ones:
    Kerberos is an auth system where the user authenticates to the kdc and is issued a TGT (Ticket Granting Ticket). The user then presents their TGT and a service principal (Kerberos name of a server) to the kdc to get a service ticket. The user then sends the service ticket to the server who lets the user in.
    Some interpretation:
    Mar 22 09:18:35 zool09.abc.xy krb5kdc[218](info):
    TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 130.60.23.23:
    UNKNOWN_SERVER: authtime 1143003387,
    [email protected] for krbtgt/[email protected],
    Server not found in Kerberos database
    This (TGS_REQ) is request for a service ticket from 130.60.23.23 using the
    TGT owned by [email protected], to get a service ticket for
    krbtgt/[email protected]. It looks like krbtgt/[email protected] is not in your kdc's database. This looks like a cross realm request.
    If you are also connected to an active directory system you might see something like this.
    Mar 22 09:19:20 zool09.abc.xy krb5kdc[218](info):
    AS_REQ (7 etypes {18 17 16 23 1 3 2}) 130.60.23.11:
    NEEDED_PREAUTH: [email protected] for
    krbtgt/[email protected], Additional
    pre-authentication required
    Mar 22 09:19:20 zool09.abc.xy krb5kdc[218](info):
    AS_REQ (7 etypes {18 17 16 23 1 3 2}) 130.60.23.11:
    ISSUE: authtime 1143015560, etypes {rep=16 tkt=16
    ses=16}, [email protected] for
    krbtgt/[email protected]
    The AS_REQ's above are the two step authentication process for user [email protected] from 130.60.23.11.
    Mar 22 09:19:20 zool09.abc.xy krb5kdc[218](info):
    TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 130.60.23.11:
    UNKNOWN_SERVER: authtime 1143001370,
    [email protected] for
    krbtgt/[email protected], Server not
    found in Kerberos database
    This is another service ticket request. Though the requested service principal looks malformed, I would look for something misconfigured on 130.60.23.11.
    Possibly watch what user zds01 is doing during login to get some idea of what's going on.
    Mar 22 09:19:20 zool09.abc.xy krb5kdc[218](info):
    TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 130.60.23.11:
    UNKNOWN_SERVER: authtime 1143001370,
    [email protected] for
    krbtgt/[email protected], Server not found
    in Kerberos database
    Same as above.
    What do they mean? I didn't set up Kerberos
    authentication, I think I don't need it, is there any
    way to disable it? Or am I using it without knowing
    it??
    When you set up the OD Master, a kdc & the needed files were set up to allow single sign on to all the kerberized services in the system.
    - see if you have an
    /Library/Preferences/edu.mit.Kerberos file
    - Also look for an /etc/krb5.keytab file
    Yes, I have both of them.
    kadmin.local -q listprincs on the OD server gives me
    a long list of computers, users and services like
    this:
    I don't know what these all mean... could you give me
    a brief explanation?
    [email protected]
    When you create a computer record in Workgroup Manager a generic principal name is added to the kdc for that computer. It is related to the host/computer_name@REALM service principal for servers.
    [email protected]
    This is a user principal (this is the account name for the user in the Kerberos system) Sometimes you will see user/admin@REALM.
    afpserver/[email protected]
    This is a service principal. They usually are in the form servicetype/server_dnsname@REALM
    One of the things that Kerberos is very sensitive to is correct DNS configuration. You need to have both forward (name -> IP) and reverse (IP -> name) DNS set up for all the servers in your realm.
    Hope this helps
    - Leland
    DP G4   Mac OS X (10.4.5)  

  • Not able to execute one Java program from another one via. exec()

    Hi,
    I am new to this forum, so I might be asking a very trivial quetion.
    My program Ap1 is :
    class Ap1
    public static void main(String a[]) throws Exception
    Runtime rt=Runtime.getRuntime();
    Process p=null;
    p=rt.exec("javac,Pr.java");
    Runtime.getRuntime().exec("javac,Pr.java");
    When I run the above program, I get below error at the line 7(bold one):
    D:\batchwe>javac Ap1.java
    D:\batchwe>java Ap1
    Exception in thread "main" java.io.IOException: CreateProcess: javac,Pr.java err
    or=2
    at java.lang.ProcessImpl.create(Native Method)
    at java.lang.ProcessImpl.<init>(ProcessImpl.java:81)
    at java.lang.ProcessImpl.start(ProcessImpl.java:30)
    at java.lang.ProcessBuilder.start(ProcessBuilder.java:451)
    at java.lang.Runtime.exec(Runtime.java:591)
    at java.lang.Runtime.exec(Runtime.java:429)
    at java.lang.Runtime.exec(Runtime.java:326)
    at Ap1.main(Ap1.java:7)
    Path is set as below(which seems correct):
    D:\batchwe>path
    PATH=C:\Program Files\Java\jdk1.5.0_05\bin
    I am just wondering how to call one Java program from another one?!
    Please help.
    thanks
    Rashmi

    Hi diptaPB,
    Thanks for your suggestion.
    Here is how I tried it again, but not getting the desired output:
    Class Pr looks like below -->
    class Pr
    public static void main(String a[])
    System.out.println("hi from process");
    When I run 'Pr' from command prompt, i get the desired output:
    D:\batchwe>java Pr
    hi from process
    However, when I call 'Pr' from another program Ap2.java, it seems that it does not call 'Pr':
    class Ap2
    public static void main(String a[]) throws Exception
    Runtime rt=Runtime.getRuntime();
    Process p=null;
    String[] cmd=new String[2];
    cmd[0]="javac";
    cmd[1]="Pr.java";
    p=rt.exec("cmd");
    D:\batchwe>javac Ap2.java
    D:\batchwe>java Ap2
    ************* no output appears here***********************
    Looking forward for your help.
    regards
    Rashmi

  • Create a sales order with reference to another one. (BAPI)

    Hi everybody,
    I'm trying to create a new sales order with reference to another one (That's important because of the documents flow).
    I'm using 'BAPI_SALESORDER_CREATEFROMDAT2' but I couldn´t do it yet. I've read some ideas about this kind of creation in this forum; but I still haven´t found the solution yet.
    Some ideas about the BAPI parameters I nedd to complete?
    Thanks in advance!!

    Hi,
    Go through this one
    *& Report ZSD_R_SALESORDER
    report zsd_r_salesorder1 line-size 132 message-id zmmbapi .
    *& Created By : shailaja
    *& Created on : 13.10.2007
    *& Requested By : vardhman
    *& Description of program :
    Internal table definition *
    data: gt_order_header_in like bapisdhead occurs 0 with header line,
    gt_return like bapireturn1 occurs 0 with header line, " Return Messages
    gt_order_items_in like bapiitemin occurs 0 with header line, " Item Data
    gt_salesdocument like bapivbeln-vbeln , "Number of Generated Document
    gt_order_partners like bapiparnr occurs 0 with header line, "Document Partner
    gt_return1 like bapiret2 occurs 0 with header line.
    Data definition *
    types: begin of ty_gt_ft_sales ,
    partn_numb(10) type n ,"Customer Number 1
    partn_role(2) ,"Partner function
    sales_org(4) , "Sales Organization
    distr_chan(2) , "Distribution Channel
    division(002), "DIVISION
    doc_type(4) , "Sales Document Type
    purch_no(020), "Purchase order
    material(18), "MATERIAL
    targetquantity(020),"Target quantity
    reqqty(020), "Req quantity
    reqdate(010), "req date
    *REQ_DATE_H(010),
    ref_1(012), "Ref
    unload_pt(025),
    *PARTN_ROLE(2) ,"Partner function
    *PARTN_NUMB(10) ,"Customer Number 1
    end of ty_gt_ft_sales,
    begin of ty_header ,
    partn_numb(10) ,"Customer Number 1
    partn_role(2) ,"Partner function
    sales_org(4) , "Sales Organization
    distr_chan(2) , "Distribution Channel
    division(002), "DIVISION
    doc_type(4) , "Sales Document Type
    purch_no(020), "Purchase order
    unload_pt(025),
    req_date_h(010),
    end of ty_header,
    begin of ty_item,
    material(18), "MATERIAL
    targetquantity(020),"Target quantity
    reqqty(020), "Req quantity
    reqdate(010), "req date
    ref_1(012), "Ref
    *UNLOAD(025),
    end of ty_item.
    data : msg(240) type c, " Return Message
    e_rec(8) type c, " Error Records Counter
    rec_no(8) type c, " Records Number Indicator
    s_rec(8) type c, " Successful Records Counter
    t_rec(8) type c, " Total Records Counter
    v_matnr like mara-matnr,
    v_parvw type parvw.
    data : gt_ft_sales type standard table of ty_gt_ft_sales with header line.
    data : wa_gt_ft_sales type ty_gt_ft_sales,
    wa_order_items_in like gt_order_items_in,
    wa_gt_ft_sales1 type ty_gt_ft_sales,
    wa_header type ty_header,
    salesdocument like bapivbeln-vbeln.
    selection block for EXCEL UPLOAD FILE
    selection-screen begin of block b1 with frame title text-000.
    parameters file type ibipparms-path obligatory.
    selection-screen end of block b1.
    *<<<<AT SELECTION-SCREEN ON VALUE-REQUEST FOR FILE .
    at selection-screen on value-request for file .
    perform getname.
    form getname.
    call function 'F4_FILENAME'
    exporting
    program_name = syst-cprog
    dynpro_number = syst-dynnr
    importing
    file_name = file.
    endform.
    *TOP-OF-PAGE.
    top-of-page.
    skip 3.
    format color col_heading inverse on.
    write 40 text-001.
    format color col_heading inverse off.
    skip 1.
    format color col_negative inverse on.
    write :/ text-002, 13 sy-mandt , 104 text-003, 121 sy-uname,
    / text-004, 13 sy-datum , 104 text-005, 121 sy-uzeit.
    format color col_negative inverse off.
    skip 3.
    *START-OF-SELECTION.
    start-of-selection.
    perform get_data.
    perform bapi.
    *end-of-page.
    perform result.
    form result.
    t_rec = e_rec + s_rec.
    skip 3.
    format color col_total inverse on.
    write: /38 text-007, t_rec.
    format color col_total inverse off.
    format color col_negative inverse on.
    write: /38 text-008, e_rec.
    format color col_negative inverse off.
    format color col_total inverse on.
    write: /38 text-009, s_rec.
    format color col_total inverse off.
    endform.
    *& Form get_data
    text
    --> p1 text
    <-- p2 text
    form get_data .
    call function 'WS_UPLOAD' "#EC *
    exporting
    filename = file
    filetype = 'DAT'
    tables
    data_tab = gt_ft_sales
    exceptions
    conversion_error = 1
    file_open_error = 2
    file_read_error = 3
    invalid_type = 4
    no_batch = 5
    unknown_error = 6
    invalid_table_width = 7
    gui_refuse_filetransfer = 8
    customer_error = 9
    no_authority = 10
    others = 11.
    if sy-subrc 0 .
    message e000.
    endif.
    endform. " get_data
    *& Form BAPI
    form bapi .
    loop at gt_ft_sales into wa_gt_ft_sales.
    wa_gt_ft_sales1 = wa_gt_ft_sales.
    at new partn_numb.
    wa_header-doc_type = wa_gt_ft_sales1-doc_type..
    wa_header-sales_org = wa_gt_ft_sales1-sales_org . "'0001'
    wa_header-distr_chan = wa_gt_ft_sales1-distr_chan. "'01'
    wa_header-division = wa_gt_ft_sales1-division. " '01'
    wa_header-purch_no = wa_gt_ft_sales1-purch_no.
    wa_header-req_date_h = wa_gt_ft_sales1-reqdate.
    call function 'CONVERSION_EXIT_PARVW_INPUT'
    exporting
    input = wa_gt_ft_sales1-partn_role
    importing
    output = v_parvw.
    wa_header-partn_role = v_parvw.
    wa_header-partn_numb = wa_gt_ft_sales1-partn_numb.
    wa_header-unload_pt = wa_gt_ft_sales1-unload_pt.
    move-corresponding wa_header to gt_order_partners.
    move-corresponding wa_header to gt_order_header_in.
    append gt_order_header_in.
    append gt_order_partners.
    endat.
    call function 'CONVERSION_EXIT_CCMAT_INPUT'
    exporting
    input = wa_gt_ft_sales1-material
    importing
    output = v_matnr.
    gt_order_items_in-material = v_matnr .
    gt_order_items_in-target_qty = wa_gt_ft_sales1-targetquantity . "'1000'
    gt_order_items_in-req_qty = wa_gt_ft_sales1-reqqty.
    gt_order_items_in-req_date = wa_gt_ft_sales1-reqdate.
    *GT_ORDER_ITEMS_IN-BILL_DATE = wa_GT_FT_SALES1-REQDATE.
    gt_order_items_in-ref_1 = wa_gt_ft_sales1-ref_1.
    append gt_order_items_in.
    clear : wa_gt_ft_sales1,wa_header.
    at end of partn_numb.
    call function 'BAPI_SALESORDER_CREATEFROMDAT1'
    exporting
    order_header_in = gt_order_header_in
    WITHOUT_COMMIT = ' '
    CONVERT_PARVW_AUART = 'X'
    importing
    salesdocument = salesdocument
    SOLD_TO_PARTY =
    SHIP_TO_PARTY =
    BILLING_PARTY =
    return = gt_return
    tables
    order_items_in = gt_order_items_in
    order_partners = gt_order_partners.
    ORDER_ITEMS_OUT =
    ORDER_CFGS_REF =
    ORDER_CFGS_INST =
    ORDER_CFGS_PART_OF =
    ORDER_CFGS_VALUE =
    ORDER_CCARD =
    ORDER_CFGS_BLOB =
    ORDER_SCHEDULE_EX =
    if gt_return-type eq 'E' .
    e_rec = e_rec + 1.
    read table gt_return with key id = 'V1'.
    format color col_negative inverse on.
    rec_no = e_rec + s_rec.
    concatenate text-006 rec_no ':'
    gt_return-message into msg separated by space .
    condense msg.
    write: / msg.
    format color col_negative inverse off.
    elseif gt_return-number = '000'.
    s_rec = s_rec + 1.
    format color col_positive inverse on.
    msg = 'SUCCESS'.
    condense msg.
    write: / msg .
    format color col_positive inverse off.
    write :/ salesdocument, 'Has been created'.
    perform commit_mm.
    endif.
    clear: gt_return[], msg.
    endat.
    endloop.
    endform. " SLALE_UPLOAD_DATA
    *& Form COMMIT_MM
    text
    --> p1 text
    <-- p2 text
    form commit_mm .
    call function 'BAPI_TRANSACTION_COMMIT'
    exporting
    wait = 'X'
    importing
    return = gt_return1.
    clear: gt_order_items_inhttp://].\"GT_ORDER_CONDITIONS_IN[.
    endform. " COMMIT_MM
    inthis pass re_doc field in header...
    Edited by: Naresh kumar

  • "No connectivity with the server" error for one document but not the other, in the same document library

    We have a number of users all of a sudden getting "No connectivity with the server.  The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
    just by clicking the link and selecting the "Read Only" option.  If they select the "Check Out and Edit" option, they can open the document no problem.  One of my customers gets the error on one document but not the other, in
    the same document library!  The older document (a weekly report) was copied and renamed as per standard procedure.  She can read the older document, but not the new one.
    It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error.  We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
    created profile does not experience the error for these people.  Renaming the profile back restores all their personal settings but the error reappears.  When we copied the old profile's folder structure into the new profile, many of the user settings
    were restored (but not all, like Dreamweaver settings) but the error did not appear.  We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy.  We are rebooting between
    logons to make sure all files are unlocked.
    The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
    2005 SP4.  SharePoint is 64bit MOSS 2007 with the latest CU.
    We've checked the logs on the client as well as on the server and there aren't any helpful entries.  We've also run Process Monitor, also with no helpful entries.  We're planning to run something like Fiddler next.
    It's not everyone, because there are many people are accessing the SharePoint system and the same files.  It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes.  One person experiencing
    the errors is a Site Collection Admin.  That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file.  They were able to open it Read Only no problems that day, but the next day, the same
    file gave them an error.   In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
    We've tried lots of things including:
    Deleting IE cache
    Deleting SharePoint Drafts and webcache folder contents
    Running IE without add-ons
    Upgrading and Downgrading IE
    Uninstalling and re-installing IE
    Reinstalling our SSL certs
    Repairing Office
    Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool 
    Deleting all HKLM and HKLU Office registry settings
    Toggling IE Compatibility Settings
    Toggling the IE Automatic Logon option
    Toggling the location of checked out files
    Adding the site in the trusted sites list
    Adding the site to the WebClient\Parameters registry locations
    Making sure the WebClient service is started
    Rebooting the machine (lol :)
    This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing.  There aren't
    "check out" workarounds for some of those macros.
    We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next.  Thanks!
    -Richard.
    PS  I think this needs to be in the "General" forum instead?

    It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes.  It helped tremendously that my own machine was throwing the error.  I have scheduled a couple of users to work with me to test the
    various fixes, to see which one works best, so the story isn't over yet.
    I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done.  I made a copy of the profile folder and was using that for awhile,
    but then made another copy where I had deleted a lot of content out of it so that the copies would go faster.  Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
    to get back to work.  Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore.  The concept was to keep as much as the users profile
    in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
    When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error.  I then tried xcopy, but got the "can't read file" error.  Then I tried robocopy, and ran into the "junction" problem. 
    I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
    So the process went as follows: 
    Reboot and log into the machine as another user
    Delete the profile and associated registry key
    Reboot and log into the machine as the affected user, creating a new profile, and there is no error
    Reboot and log in as the other user
    xcopy the contents of the skinned-down backed-up profile to the newly created profile
    Reboot and log in as the affected user, and the error occurs
    Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
    I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring.  That was strange, because we've cleaned out the cache folders
    before which didn't fix the issue. 
    So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
    What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
    One way to do this was to:
    Reboot and log in as another user
    Rename the c:\users profile folder
    Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
    Reboot and log in as the affected user, confirm that there is no error
    Reboot and log in as the other user
    Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
    Delete new profile folder, and rename the backup to be the production folder
    Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
    Reboot and log in as the affected user, confirm that there is no error
    We've tried this on a couple machines and it works.  I had to run Windows Explorer as Administrator to access the other profile's folders.
    We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
    We may attempt to script this, but the self-help instructions are only 5 lines long:
    Reboot and log into the affected computer with another account
    Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
    Run Windows Explorer as Administrator
    Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
    Reboot and log into your normal account, and confirm the error is gone
    I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it.

  • Place one IDML file inside another one.

    I want to place one or more IDML files into another single IDML "master" file.
    The master file is sort of a template for a site layout. The IDML files I need to embed represent single content boxes with specific layouts. The files for those content boxes are created outside of InDesign with some texts I get from a database.
    To retain those layouts I deemed it best to just place them into another document which is no problem with INDD but just with IDML.
    I managed to link multiple INDD files into the master file in InDesign itself, but can not figure out how to link IDML files. I also found that it is possible to link INDD files into IDML files, just not IDML into IDML.
    I need to be working with IDML as opposed to INDD because I have to be able to manipulate the files in an easy way outside of InDesign.
    Is there any way to link IDML files into other IDML files? Or if not, is there a possibility to convert my IDML files to INDD files without having to use a real instance of InDesign?
    Relevant Lines of code from the master IDML file taken from the Spread.xml file:
    <Link Self="u9f81" AssetURL="$ID/" AssetID="$ID/" LinkResourceURI="file:/path/to/subtemplates/box2.idml" LinkResourceFormat="$ID/InDesign Format Name" StoredState="Normal" LinkClassID="35906" LinkClientID="257" LinkResourceModified="false" LinkObjectModified="false" ShowInUI="true" CanEmbed="true" CanUnembed="true" CanPackage="true" ImportPolicy="NoAutoImport" ExportPolicy="NoAutoExport" LinkImportStamp="file 130505142560000000 1396736" LinkImportModificationTime="2014-07-22T16:50:56" LinkImportTime="2014-07-23T11:42:22" LinkResourceSize="0~155000" />
    If I leave this in and try to open the file in InDesign I get the error message that the linked file type is not supported
    <Link Self="u9f81" AssetURL="$ID/" AssetID="$ID/" LinkResourceURI="file:/path/to/subtemplates/box1.indd" LinkResourceFormat="$ID/InDesign Format Name" StoredState="Normal" LinkClassID="35906" LinkClientID="257" LinkResourceModified="false" LinkObjectModified="false" ShowInUI="true" CanEmbed="true" CanUnembed="true" CanPackage="true" ImportPolicy="NoAutoImport" ExportPolicy="NoAutoExport" LinkImportStamp="file 130505142560000000 1396736" LinkImportModificationTime="2014-07-22T16:50:56" LinkImportTime="2014-07-23T11:42:22" LinkResourceSize="0~155000" />
    If I put this in everything works fine.
    Notes: box1.indd and box2.idml are the exact same files, just saved differently by InDesign. The path to both files is a valid file system path and has full read/write access.

    Thank you for your reply. I already know that it is possible to edit IDML files, which is what I am already doing.
    What I am now looking for is a way to place one IDML file into another one like you are able to do with INDD files.
    Which file format should I use insted then? It must be editable outside of InDesign because I need to be able to change texts and stylings within the file.
    Laubender
    That possibly means you have to have InDesign Server to integrate in your workflow.
    That's the exact thing I am trying to avoid here.

  • How to drop a schema and load another one?

    I have an interruption during installing the central instance of a SAP Netweaver 04s System. After I restarted the installation I found this message in the Log file.
    <b>ERROR 2006-08-16 16:17:04</b>
    CJS-30109 The Java load in database PDV/liesc1ddbw01 has already been configured. <p> SOLUTION: Drop the schema and load it with a new load before running this installation.
    <b>ERROR 2006-08-16 16:17:04</b>
    CJS-30109  The Java load in database PDV/liesc1ddbw01 has already been configured. <p> SOLUTION: Drop the schema and load it with a new load before running this installation.
    <b>ERROR 2006-08-16 16:17:04</b>
    FCO-00011  The step getJavaLoadType with step key |NW_Java_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|10|0|getJavaLoadType was executed with status ERROR.
    QUESTION: How to drop a schema and load another one?

    Hello,
    I got the similar error....but i did reinstall from o.s. and done the installation again...it was worked successfully..
    if you find out alternate solution for that ...please let us know..
    Regards,

  • GSSAPI Error - Miscellaneous failure - ldap - krbtgt

    Hello,
    So I don't know too much about managing and maintaining a network, but I know 1000 times more than everyone I work with.  So I got the "IT Guy" title pushed on me.  So I was looking at the server logs and there is a message that shows up every minute.  And every minute the message displays about 10 times.
    2/8/13 12:15:53.844 PM slapd: GSSAPI Error:  Miscellaneous failure (see text (Server (krbtgt/[email protected]) unknown while looking up 'ldap/[email protected]' (cached result, timeout in 1200 sec))
    Also in the slapd.log this message shows up over and over.  I don't know if they are related, but they could be.
    Feb  8 12:18:56 sol slapd[49440]: do_syncrepl1: client_connect failed (-1)
    Feb  8 12:18:56 sol slapd[49440]: slap_client_connect: URI=ldap://marvin.multi-tek.com:389 ldap_sasl_interactive_bind_s failed (-2)
    I've searched and searched for an answer here and other places, but no one seems to have the same problem.  I don't even know if this is a problem although I don't think this should be happening.  Everything seems to be working okay.  We have 2 servers running Lion.  Let me know what else you need to know.
    Thanks for looking.

    Solved the problem by myself
    - Disable the automatic recognition of the account settings-

  • There is not enough disk space available at the selected destination. Please choose another one or clear some space

    Importing a small motion movie into fcpx and I get this error "There is not enough disk space available at the selected destination. Please choose another one or clear some space"  the destination is a new 6TB raid thats empty.  I've created a new library  on that drive and still get the same error!  help..

    Did you format your new drive to MAC OS Extended?
    Al

  • Hush now slapd.log GSSAPI Errors

    I think we got the GSSAPI errors showing up repeatedly in our slapd.log to go away by stripping out then replacing the LDAP KDC principle and key. Here's how if you'd like to try (at your own risk):
    Remove the LDAP service principal:
    sudo kadmin.local -q 'delprinc ldap/<FQDN>'
    Remove the principal key from the keytab:
    sudo kadmin.local -q 'ktrem ldap/<FQDN>'
    Create a fresh LDAP service principal:
    sudo kadmin.local -q 'addprinc -randkey ldap/<FQDN>@<REALM>'
    Import the new principal key into the keytab file:
    sudo kadmin.local -q 'ktadd ldap/<FQDN>@<REALM>'
    Reboot when convenient. Reloading the slapd didn't seem to enable this
    fix. I did not try reloading both slapd and the krb5kdc.
    (FQDN = Fully Qualified Domain Name. Yes I know you know, but there will be somebody that will message me asking what it means)

    We're seeing them on just about all of our Tiger servers. We are or were having stability issues and this was one of the odd activities taking place. I felt that it was better to clear these just incase they were playing a role in the instability.
    The cause could be that there is something wrong with Apple's integration of OpenLDAP with Kerberos. Somehow OpenLDAP isn't happy with the LDAP principal and key within Kerberos. Refreshing it manually with these commands sorted it.

  • Change dummy profit center to another one

    Hello,
    I am beginning the customizing of a new system (so there are no postings for the moment). A Dummy profit center is already created but I want to change it.
    I try to change the master data but the case "Dummy profit Center" is not available.
    How is it possible to switch the dummy profit center to another one ?
    I thank you in advance for your answer.
    Céline

    Hi,
    As per Std.SAP we need to create dummy profit center.  it is not same as create profit center, KE59 though we can create the  dummy profit center, for normal profit center the t.Code is KE51.
    I am not able to under stand where you are changing the master data.
    give the correct error what you are getting.
    regards.
    Gopi.P

  • ADO Error: 0x00000001 Argument error. One of the column names specified is blank.

    I am writing a database program and have come across this error -
    ADO Error: 0x00000001
    Argument error. One of the column names specified is blank.
    I have tried everything I can think of and have no idea what to try next.
    The VI that the error is occuring in (attached written in LV 2011) allows the user to enter in the details of a new user. It then looks up this user to get the ID (primary key) of the user which will be used in another step of the program. The VI writes to the database fine but then comes back with the above error when using the SELECT query. All columns in the database have data in them. Also when i use a differnt VI that just looks up the user/customer it works fine. 
    I have tried deleting all the code and copying the code from the simpler (look up only) VI but I still get the same error.
    I created an indicator for the concatenated text to make sure the query was right and it appears to be fine. So now I am stumped. Any help would be greatly appreciated.
    Thanks
    Attachments:
    AddNewMeasurer.vi ‏40 KB

    tripped wrote:
    I am writing a database program and have come across this error -
    ADO Error: 0x00000001
    Argument error. One of the column names specified is blank.
    I have tried everything I can think of and have no idea what to try next.
    The VI that the error is occuring in (attached written in LV 2011) allows the user to enter in the details of a new user. It then looks up this user to get the ID (primary key) of the user which will be used in another step of the program. The VI writes to the database fine but then comes back with the above error when using the SELECT query. All columns in the database have data in them. Also when i use a differnt VI that just looks up the user/customer it works fine. 
    I have tried deleting all the code and copying the code from the simpler (look up only) VI but I still get the same error.
    I created an indicator for the concatenated text to make sure the query was right and it appears to be fine. So now I am stumped. Any help would be greatly appreciated.
    Thanks
    The query "appears" fine. Well, obviously it isnt' fine. The database is telling you that.
    What is the SELECT query you are sending?

  • Replacing an embedded component by another one

    Hi!
    I have created a WD component interface (let's name it INTERFACE) and I am using this in a main component (let's call it MAIN). Then I have two interface Implementations (many will follow), let's name them IMPL_1 and IMPL_2.
    In the MAIN-component I have an ViewcontainerUIElement, that is connected with the Usage of the interface. When the user clicks a button, a specific implementation - e.g. IMPL_1 should be embedded there. this works by calling CREATE_COMPONENT( 'IMPL_1' ).
    If the user clicks another button, another implementation of the interface should be shown there - so I remove the existing component via DELETE_COMPONENT and create the new one with CREATE_COMPONENT( 'IMPL_2' ).
    That does not throw any error, but the embedded view disappears and will never come back again.
    So my question is: what is the easiest way to replace an embedded component IMPL_1 with another one IMPL_2 - both implementing the same interface! This should be fairly simple, as I'm referencing just the interface in the MAIN-Component.
    Any hints? I'm just finding very difficult solutions with PREPARE_DYNAMIC_NAVIGATION and so on - but I don't want to recreat all Plug-Connections again as they have been connected in the designer using the interface-definition....
    Thanks in advance!
    TopperDEL

    Hi Robert,
    that sounds like a solution to my problem, yes. Unfortunately I'm not at that system until thuesday. But I will try this and post back what happened.
    But thanks so far for that hint! I think that'll work!
    Sincerely,
    TopperDEL

  • I had all of my video files that I work on in iMovie saved to an external hard drive exclusively to save space on my Macbook.  I had just finalized a project, went to work on another one and files couldn't be found, were not deleted how do I find them?

    I had all of my video files that I work on in iMovie saved to an external hard drive exclusively to save space on my Macbook.  The other day I had just finalized a project and went to work on another one and when I opened the project I could see what should have been there, but scrolling over the entire clip I would only see black and that the file was missing.  I did not drag anything on the hard drive to the trash or move anything.  How can I get those files?  These are videos of my kids and I am devastated and willing to try anything!

    Control click does not work - no option to find files.  I have no idea what to do.  When I look at the usage of the external drive the space is being used, but I cannot find the files.  I am going to try MacKeeper's Undelete and see if I can make any progress with it. 

Maybe you are looking for

  • How do I add an apple ID

    I am the disgruntled spouse that is forced to deal with these GOD **** apple products because my wife desires them. They are F'ING impossible to use. First thing the new i-pod touch 4.0 touch asks me to do is insert my apple user name and password. I

  • Goldengate Language settings

    Hi, We have OS / Application being configured to Japanese language. Can we install Goldengate in English version and how will the log files will be generated? Does it have any effect on goldengate configuration? And whether it is a valid scenario? Th

  • I keep getting an invalid SSl error message when I try yo upload medical reciepts to my flexible spending provider. never a problem before

    My flexible spending account is with ADP. I have been going to that site for 2 years to upload my receipts and now it says "invalid SSL" when I try. Its very frustrating!!! HELP!!!

  • IMovie vs. Final Cut Express HD

    I have captured video onto FCE HD but have decided to edit it in iMovie because I am more familiar with it. Is it possible to move the captured videos to iMovie from FCE HD? If so, how?

  • AirPort Extreme 802.11n macbook pro

    I have just set up time capsule and it works perfectly (painless process setting this up!) One query i have is re: AirPort Extreme 802.11n. I have a macbook pro 2.16GHz core duo, and according to network utility i have Wireless Network Adapter (802.1