GTA IV ERROR DD3D30 HEEEEEELLLLPP!!!!!!!

HELP I have a MacBook Pro 13" inch mid 2009 running osx 10.9 (Mavericks) and I Installed bootcamp and GTA IV And everytime I open it it gives me this error
FATAL ERROR DD3D30
WHAT DOES IT MEAN AND WAT DO I NEED TO DO TO FIX IT? PLEASE HELP!!!!!!

seems to be a common gta 4 issue
https://www.google.dk/search?q=gta+4+FATAL+ERROR+DD3D30&oq=gta+4+FATAL+ERROR+DD3 D30&aqs=chrome..69i57j0l5.2123j0j8&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8

Similar Messages

Gta v error solution.

This has worked for me and my friends. Go to your account on rockstar social club and unlink your psn from it. Then after a minute load up gta. You should now be able to load up and join online. Finally when your on relink your psn to social club. Like i said its worked for me and all my friends who couldnt get on. I hope this helps you all.

It should work for most of you. If it does spread the word and comment below.

I am trying to run gta iv on my mac.. but i am seeing error messages as soon as it begins.

i am trying to run gta iv on my mac.. but i am seeing error messages as soon as it begins.

It must be a poorly ported Mac Version . . . From Rockstar (the ones who ported the program over)
Question: What are the system requirements for the Mac versions of GTA III, Vice City, and San Andreas?
Answer: The following list details the minimum requirements and supported specs for GTAIII, Vice City, or San Andreas on the Mac.
Supported Operating Systems: Mac OS X 10.5.8, Mac OS X 10.6.2 Snow Leopard
Supported Processors: Intel Core 2 Duo Processor or higher. This game will NOT run on PowerPC (G3/G4/G5) based Mac systems (PowerMac)
Memory: 1GB RAM
Hard drive: At least 9GB of free Hard Disk space
Graphics: ATI X1600, NVIDIA 7300 GT or Intel X3100 integrated graphics chip
Input: Keyboard and mouse
Filesizes:
GTA III: 731.9MB
Vice City: 1.3GB
San Andreas: 3.9GB
The following are known issues and details about unsupported Mac hardware:
Mac mini: Some Mac Minis have the Intel GMA950 graphics chipset which is NOT supported for select game titles.
Macbook: Some MacBooks use an Intel X3100 graphics chipset which may require a game to be run under low graphics settings or may prevent the game from running at all. MacBooks with an Intel GMA950 graphics chipset are NOT supported for select game titles.
Macbook Air: Some MacBooks use an Intel X3100 graphics chipset which may require a game to be run under low graphics settings or may prevent the game from running at all.
Macbook Pro: No known issues
iMac: Information coming soon
Mac Pro: No known issues

GTA 5 CLOSING AUTOMATICALLY AND SHOWING A SOME KIND OF ERROR

IT SHOW A ERROR AND CLOSING AUTOMATICALLY WHEN I PLAY GTA 5

TheMadGamersTMG wrote:
IT SHOW A ERROR AND CLOSING AUTOMATICALLY WHEN I PLAY GTA 5 Welcome to the forums & sorry to hear about your troubles. Can you please give us more details in order for us to try assist you with a solution...
The label says it's on PS4 you're having trouble on right?Can you please provide more details of the error it shows, is it a error code? Can you upload a screen shot?Are you playing from disk or digital download?... If disk, have you checked the disk for any damages/dirty spots?

GTA IV FATAL ERROR: TEXP70

Hello people of apple, download the game grand theft auto 4 for my macbook pro and when I run the error GTA IV FATAL ERROR: TEXP70, I smell is the video card, but do not know. please help me
mac data
Processor: 2.3 GHz Intel Core i5
RAM: 8GB
video card: Intel HD 3000 Graphics

Alright im going to explain this here, the GTA IV for Mac OS X will not work on Intel Based Graphics! It is because intel graphics is a integrated graphics that the graphics won't work well or crash in some sort of Mac OS X games. If you looking a solution for a other way to play GTA IV is too install Windows 7 to your mac using bootcamp and install GTA IV (full or crack) and play. Note: I know this cause I also have a Macbook Pro 13" Early 2011 and Macbook Pro 15" Late 2011 (I own 2 Macbook Pro).

GTA IV FATAL ERROR: TEXP70 GTA IV FATAL ERROR:

GTA IV FATAL ERROR: TEXP70 GTA IV FATAL ERROR: Unable to create depth render target - re-install DirectX and/or install the latest video card driver. Exception raised Unhandled page fault on write access to 0x00000000 at address 0x004538d6. i have Processor 2.3 GHz Intel Core i5 Memory 4 GB 1333 MHz DDR3 Graphics Intel HD Graphics 3000 384 MB Software Mac OS X Lion 10.7.2 (11C74) macbook pro 13 inch....so plz help me

Processor 2.3 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Software Mac OS X Lion 10.7.2 (11C74)
macbook pro 13 inch

GTA 4

Hi, i've got an iMac Aluminium wit 2.4ghz core 2 duo, 2 gb ram and a graphic card with these details:
ATI Radeon HD 2600 Pro:
Chipset Model: ATI,RadeonHD2600
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x9583
Revision ID: 0x0000
ROM Revision: 113-B2250F-219
EFI Driver Version: 01.00.219
Displays:
iMac:
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Built-In: Yes
Display Connector:
Status: No display connected
Now coming to the actual point, I installed windows with service pack 3 which it needs to run and bought GTA 4 Liberty City. But when i installed it and came to run it and hopefully play it on my mac running windows XP an error pooped up reading Fatal Error GTA 4 DD3D30. Any help please..

I don't know what it means, let alone how to resolve and fix it, but there are others talking about this:
http://www.google.com/search?q=FatalError+GTA+4DD3D30
... and more importantly, what it means.

MSI z68A-GD80 (g3) "B2" error with ned gtx 970

Hey.
Hardware info:
MSI z68A-GD80 (g3) - Bios version. V18.8
Intel i5 2500k
4x4GB kingston hyperX 1600mhz
MSI 970 gaming g4
PSU : Seasonic SS-500GB
My problem is that when I'm trying to install the new GPU i get the error "b2" when i boot. If i chance back to my old gpu (560 ti) or the gpu on the CPU there is no problem. Also i have tested the gtx 970 in another PC and it works.
After some reseach i found out that i need a bios update. I have tried this but with no luck, cant upgrade bios. I have use "MSI Forum HQ USB Flashing" tools with bios from MSI hp (I choose the (g3) bios) . I can get the bios on the USP stick but when I'm trying to install the new bios i got the error "Bios corruption detected !!" and stopped. I don't know what to do now, i hope that you can help me
The usp stick is fat32

I had the exact same problem as the original poster - same motherboard, same old graphics card (560ti) and same new graphics card (970 gaming) and got the same B2 error code and the PC not going beyond that.
I flashed the bios and that fixed the problem - the exact version I used was on this page:
Ok, this forum isn't allowing me to post a link to it, but just go to the official page for the motherboard on MSI's website - then click on Support and Service Location, which should open up the list of BIOS upgrades...
The top one as of writing this is version 19.2
To do the flashing of the BIOS you must load the downloaded exe file onto a flash drive and run it from there. Don't worry if it seems like your PC is hanging, it just takes a while (while still in Windows). It then reboots and will finish up flashing the BIOS (you'll see a red bar with the warning on a black background with white text).
After doing that, my GTX970 GAMING works like an absolute charm! I can now finally enjoy Minecraft like it was meant to be played haha (kidding, I played GTA 5 the whole weekend with EVERYTHING to the absolute MAX!)
Hope this helps if you are experiencing this extremely annoying error.

Error in Constructor

So i mod GTA IV with c#
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.IO;
using System.Windows.Forms;
using System.Drawing;
using System.Diagnostics;
using System.Collections.Generic;
using GTA;
using GTA.Native;
namespace Beggar
public class ambBeggar : Script
bool tb = false;
bool bp = true;
Ped rped;
AnimationSet beggarsitting;
AnimationSet beggarstanding;
Keys begkey;
GTA.Timer gmoney;
public ambBeggar()
gmoney.Interval = 120000;
gmoney.Tick += gmoney_Tick;
begkey = Settings.GetValueKey("Beg", "Beggar Mod", Keys.B);
if(!File.Exists(Settings.Filename))
Settings.SetValue("Beg", "Beggar Mod", Keys.B);
this.Interval = 100000;
this.Tick += new EventHandler(ambBeggar_get);
this.ConsoleCommand += new ConsoleEventHandler(ambBeggar_ConsoleCommand);
public void ambBeggar_get(object sender, EventArgs e)
if(tb == true && !rped.Exists())
rped = World.GetClosestPed(Player.Character.Position, 30);
public void gmoney_Tick(object sender, EventArgs e)
if (rped.Exists())
rped.Task.GoTo(Player.Character.Position.Around(2));
Pickup.CreateMoneyPickup(rped.Position, 1000);
rped.NoLongerNeeded();
public void ambBeggar_ConsoleCommand(object sender, ConsoleEventArgs e)
if(e.Command == "t_beggar" && tb == false)
tb = true;
Function.Call("REQUEST_ANIMS", "amb@beg_sitting");
//Function.Call("REQUEST_ANIMS","amb@beg_standing");
if (Function.Call<bool>("HAVE_ANIMS_LOADED","amb@beg_standing") /*&& Function.Call<bool>("HAVE_ANIMS_LOADED","amb@beg_sitting")*/)
msg("Press" + begkey.ToString() + "To Beg", 5000);
beggarsitting = new AnimationSet("amb@beg_sitting");
//beggarstanding = new AnimationSet("amb@beg_standing");
Player.Character.Animation.Play(beggarsitting, "beggar_sit", 8, AnimationFlags.Unknown05);
while(tb == true)
beg_playing();
if(Game.isKeyPressed(begkey))
Player.Character.Task.ClearAllImmediately();
Player.Character.Task.PlayAnimation(beggarsitting, "beggar_beg", 8);
gmoney.Start();
while (bp == true) Wait(0);
Player.Character.Task.ClearAllImmediately();
Player.Character.Task.PlayAnimation(beggarsitting, "beggar_sit", 8,AnimationFlags.Unknown05);
if(Player.Character.isDead)
cleanup();
if(e.Command == "t_beggar" && tb == true)
cleanup();
public void msg(string sMsg, int time)
Function.Call("PRINT_STRING_WITH_LITERAL_STRING_NOW", new Parameter[] { "STRING", sMsg, time, 1 });
public void beg_playing()
if (GTA.Native.Function.Call<bool>("IS_CHAR_PLAYING_ANIM", Player.Character, "amb@beg_sitting", "beggar_beg") == false)
bp = false;
if (GTA.Native.Function.Call<bool>("IS_CHAR_PLAYING_ANIM", Player.Character, "amb@beg_sitting", "beggar_beg") == true)
bp = true;
public void cleanup()
tb = false;
gmoney.Stop();
Every time i run the game i get "Error in Constructor" and "Object reference not set to an instance of an object"

please verify
this.Interval = 100000;
Interval, member of the class or no ?
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

Error while running service tax program (New)

Hi
I have created S3 as interim tax code and S4 as final tax code. I assigned S4 to S3 as a target tax code. Entries are perfectly flowing.
But when i do service tax program for, session is created properly. When i run it in SM35, for gived error
"Tax code S4 may only contain one assignment line"
I have given routine 166 in OBQ3 for ECess and SHEC.
I tells me to do following procedure:
Use a different tax code.
For direct postings to a tax account, you might have to define a separate tax code for which only one line with a percentage rate other than zero is active in percentage rate maintenance. All other lines must be inactive.
Please help me.
Edited by: Deepak Agrawal on May 4, 2010 1:29 PM

There is one interim service tax code (for normal services) - S1. Final service tax code S2 is created assigned to S1 as target tax code.
Entry passed:
Exp A/c.. Dr                                   500000
Service Tax Basic (deferred)       50000
Service Tax ECS (deferred)         1000
Service Tax SHEC (deferred)       500
   To Vendor A/c                                        551500
For this service tax program (new) is working fine.
For the GTA scenario where service tax is not charged in invoice but we have to pay to government, in that case i have created one interim tax code G1 and i have assigned final tax code S2.
Entry passed for GTA (invoice raised by transporter is Rs. 500000):
Exp A/c.. Dr                                   515000
   To Service Tax Basic (deferred)       50000
   To Service Tax ECS (deferred)         1000
   To Service Tax SHEC (deferred)       500
   To Vendor A/c                                   500000
But when i execute the program i can see three line items (for basic, interim and SHEC)
But when i run the session, it gives error:
Tax code S2 may only contain one assignment line.
I AM UNABLE TO UNDERSTAND, WHY ITS GIVING ERROR FOR GTA SERVICE TAX TRANSFER
Edited by: Meenu_ND on Jun 1, 2010 10:48 AM

Blue Screen Error on Satellite A100-920 (PSAA9)

Hi
I had a blue screen error during normal use and after restart, Windows suggested updating the BIOS, so I updated it with the latest version (5.10). The next day, I got another blue screen and on restart, Windows suggested I update my display drivers, which I did (to ver. 8.241)... I have an ATI Radeon X1400 GPU. After doing that, the computer crashed every time it loaded windows, with a popup about services.exe telling me the computer would turn off in 60 seconds.
I assumed this was related to the display driver, so I replaced the drivers with an earlier-dated version (8.241-034065C). After I did this, it seemed to work and I could use the computer fine for a bit, even play games such as GTA but i am starting to get the blue screens again, usually just when opening folders, etc and not when running graphics-heavy applications. The problem definitely goes away when I disable my display drivers, but that's not much of a solution.
I turned off the reboot on error setting and this is the information from the blue screen of death:
*** STOP: 0x0000008E (0xC0000005,0xEE6DF5E9,0xBAD2F99C,0x00000000)
*** system32:huy32.sys - Address EE6DF5E9 base at EE6DD000, Datestamp 45abe717
Does anyone have any idea how I can sort this problem, it's driving me crazy!
I have downloaded the Omega drivers for the card, but am slow to install them as I hear they can cause overheating and I think ATI/Toshiba should be able to provide me with a solution without me having to use third party drivers.

I have Network Associates (McAfee) v. Enterprise 8. I ran a full virus scan with this and windows defender and a worm stinger utility and another microsoft app whose name I forget... all came up clean.
I tried the omega drivers out of frustration and they cause services.exe to terminate.
Could it possibly be a BIOS issue? I'm not sure how likely it is, since the computer definitely works with the display adapter enabled and will usually crash (BSOD) after anything from a few mins to a few hours with it enabled. I seem to be getting two types of reply from microsoft on restart, one saying there is a general driver fault and one saying there is a display driver fault and suggesting updating the display drivers.

GTX 970 PC Crashing (Started since I played GTA V and it crashed)

This all started 2 days ago while I was playing GTA V. Someone recommended installing Afterburner to look at my CPU and GPU usage while in game. Once the program was installed I was trying to understand how it worked, and I was looking at the sliders in the middle. I attempted to move one as it looked as if the changed had to be applied by the tick button, I moved it a tiny amount tot the right and suddenly my PC decided it would start to lag. So, I just put it back to where it was and left it (without pressing the tick)
I have no idea if the above is actually relevant, but I never experienced any issues before then. The next day I went onto GTA V to play it again, and after a few minutes in the middle of a car chase where a lot was going on my game exited with the error message... err_gfx_d3d_init . This was followed by text saying: Failed Initialization. Please reboot and restart the game. Try re-installing the game if this persists. I am not prepared to download the 60gb game again unless it is outlined as the problem for sure, since I have a download speed of 700kbps.
This kept happening but then it started to just shutdown my PC all together when this happened. This has now risen to the point of I had to unplug my graphics card as I would have no display while turning on my PC. My PC is now working fine with the exception of the graphics card. I have decided to try reinstalling the drivers which is something I am attempting to do right now (Update will be posted below).
PC Specs:
i7 4790k 4ghz
16gb DDR3
Asrock Z97 Pro4 Socket 1150
Corsair RM 650W
MSI GTX 970 GAMING Twin Frozr V 4GB GDDR5 Dual DVI HDMI DisplayPort PCI-E Graphics Card
If anyone has any suggestions that will help me and the rest of the GTA V gaming community about these crashes then it would be hugely appreciated.

Hey guys,
I'm having the EXACT same error. I don't know what to do anymore. I purchased newer faster RAM to see if it was a case of overloaded forcing a shutdown of the game?
I upgraded from 8Gb to 16Gb, anyways.. It didn't work.
Essentially, game crashes, I get the "D3D_INIT" error asking me to reinstall and nothing has changed, despite the clean re-installation of drivers and the game alike I am getting really frustrated with this especially when it drops during something like a 'Heist'. I've followed countless forums posts on here and 'Tomshardware.com' and the rest. I'm currently trying to make up my mind of whether or not to return the card since it's obviously not up to the job.
I would really appreciate some help on this.
I haven't changed any settings as its factory set and OC'd (Maxwell Edition).
Current set up:
MoBo: MSi Gaming 5, Z97
CPU: Intel i7 4790k @ 4.4Ghz (Factory/MoBo Turbo)
GPU: Single MSI GTX 970, Maxwell Edition
RAM: Corsair Vengeance Pro 2x8Gb @ 1866Mhz
Storage:
1x 120Gb SSD (w/ OS)
2x 2Tb HDD (Junk and the rest)
I really need help with this one guys. I went out to purchase the new GPU for the purpose of the newer gen games and it's been a massive let down!

Error can be trouble shooted

Hi friends,
I'm new to ODI and i was in the process of installing ODI newly from the scratch.....
As i was learning about ODI as a beginner now..im using ODI 10.1.3.5 which supports only EBS 11.5.10
To start the ODI agent on windows, they have given the below steps as per the guide..
*) i opened the cmd window and changed the directory to
$ODI_HOME\oracledi\binAnd after that they asked to execute the following command
agentservice –i –s WORKFLOW 20910
Soon after executed it is throwing the error like saying
A JDK is required to support web service with oracleDI. You are currently using a JRE
AgentService.bat
AgentService.bat:Syntax ErrorBut according to my knowledge i didnt installed JRE.....I installed only JDK and this is it
(jdk-6u11-nb-6_5-windows-ml.exe)
I dont know why it is showing i have installed JRE...
But in my C drive---->i have a Java folder---->As it is showing JRE content's only.......
Whether is it possible to troubleshoot it...
Or else once again i need to install correct JDk, obiee, obia, ODI once again.
The above step is tedious.......
Any way in resolving it....
Thanks
All izz well
GTA

Hi Sutirtha,
Thanks for the reply, i tried by again restarting the services and now it is working Fine.
But I came up with one issue Sutirtha,
In Topology manager, under the Repositories tab i have the following
Two folders
*) Master repository_v4.2.02.01
*) Work Repositories
If i expand that 'work Repositories' means it is not showing WORKREP_7952..i dont know why???
i have expansion kind of symbol for the 'work Repositories' folder but if i expand that means it is not showing WORKREP_7952 and it is not showing anything.
i dont why this problem is occuring.
i have done all the steps necessary for creating the ODI blank work repository following the installation guide,
These are the steps that i followed
1. In the Topology Manager, display the Repositories tab.
3. In the Repositories pane, right click on Work Repositories node.
4. Select the Insert Work Repository menu option to display the Data Server: New
dialog.
5. Display the Definition tab, and enter the appropriate information, as described in
the table below.
6. Display the JDBC tab, and enter the appropriate information, as described in the
table below.
7. Click Test to display the Test Connection for: <connection> dialog.
8. From the Agent drop down list, select Local (No Agent).
9. Click Test to verify the details.
10. Click OK on the Information dialog.
11. Click OK on the Data Server: New dialog to display the Work Repository: New
dialog.
12. On the Work Repository: New dialog, enter the appropriate information, as
described in the table below
13. Click Apply, then click OK to save the details.But the Topology Manager didnt displays the WORKREP_7952 repository in the Work Repositories list in the Repositories pane.
The work repositories is showing the expansion node, but if i clicked that node means it is not showing anything.
so, again if i tried to create means (i.e) if i follow all the steps above again means it is showing the error like
java.sql.SQLException:ORA00001:unique constraint(ODI_REP_7952.AK_CONNECT)violated
Thanks for your support
All izz well
GTA..
Edited by: GTA on Jun 12, 2011 4:46 AM
Edited by: GTA on Jun 12, 2011 5:58 AM

URGENT!!!: REP-51002 ERROR with local installation without network

Hi,
we have a problem with the Oracle Reports Services (10.1.2). We get an REP-51002-Error (Bindung an Reports Server nb-gta nicht möglich).
We have a development environment where all works fine. For presentation purpose we installed the ReportsServices on a laptop. The strange thing:
When we have inserted a network cable to the laptop, all works fine. when we replace the cable, we get the REP-51002-error.
Seems that the ReportServer has a problem when no network card is present (ipconfig shows no network card or IP-Adress when the cable is replaced).
We also tried to modify the SERVER-Variable in the rwservlet.properties (set to localhost and 127.0.0.1), but with no success.
TraceFile of ReportServer reports a "NoRouteToHost"-Exception.
Thanks for help in advance!
Greetings,
Claus

If the host machine is not in a network, then try this (for Windows platform):
Install the MS loopback adapter, as described on the Miscrosoft Web site (http:\\microsoft.support.com). Then, specify an IP address for your machine (either XP or Windows 2000), as follows:
1. On your desktop, rightclick My Network Places, and select Properties.
2. Rightclick the MS loopback adapter, and select Properties.
3. In the Properties dialog box, select Internet Protocol (TCP/IP), and then click on Properties.
4. Select Use the following IP address, and enter a valid IP address. The subnet mask field will automatically populate. Do not use the local host IP (that is, 127.0.0.1). For example, enter: 198.162.1.1.
5. Click OK, and follow the instructions displayed.
Another option is to use naming services, as mentioned in pdevaal's reply.
Message was edited by:
mdey

Can't run GTA SA on Macbook Pro!

I have downloaded GTA San Andreas from uTorrents and there wasn't no errors during installation but now after it's installed i cannot run it. The icon for GTA SA has appeared but when i click on it... nothing. I also had the same problem with CSR Racing Game which i downloaded from Apple Store.
I am using a: Macbook Pro, Processor 2.5 GHz Intel Core i5, Memory 4 GB 1600 MHz DDR3, Graphics Intel HD Graphics 4000 512 MB and Software OS X 10.8.2.
Can anybody help me please?

Ummm...
You downloaded pirated software and you want help getting it to run? I don't think we'll help you here.

GTA IV ERROR DD3D30 HEEEEEELLLLPP!!!!!!!

Similar Messages

Maybe you are looking for