GUI_DOWNLOAD Control_flush_error -- session missing?
Hi guys,
here's the deal:
I developed an application (simple Report) in which a PDF is created, downloaded to the Presentation Server (Client) and executed via inetexplorer. Works all fine testing with SAP_ALL. When run with the rights of a user who's acutally going to use this application. the program fails, because the authority is missing. The respective authority CANNOT be assigned to the user due to in-house regulations.
To avoid this authority issue, I packed the code including the GUI_DOWNLOAD Function Module into an RFC-FM with the option "DESTINATION". Destinination in my case is the same server I start the request from, access is gained via a system user who has SAP_ALL. So bottom line I'm just outsourcing the code, which would require the end user to have certain rights he isn't supposed to have, to the system user...
Yet, when tested with the appropriate User (in DIalogue mode of course) I'm getting Sy-Subrc 21 = Control_flush_error. I have a sense of foreboding the session GUI_DOWNLOAD needs, is cut when Calling the RFC FM. If that is correct, I have a problem, because...
OPEN DATASET --> can be used for application server, can be used in background
DOWNLOAD/UPLOAD --> can be used for presentation user, needs dialogue mode
Can anyone confirm this?... Or maybe it's something completely different? Would I have any other chance to download a document from runtime to the presentation server via an RFC FM?
I hope someone can help me, << priority normalized >>
best regards, Lukas
Edited by: Rob Burbank on Jul 19, 2011 11:45 AM
Hey Rob,
Yeah, I did search the forums and found lots of threads which point to a "similar" direction; but I needed to make 100% sure I was assuming right technical-wise :-|
Inhouse Regulations prevent our authority experts to assign the authority object as it would enable users to download ANYTHING from ANY report... And yes, the requirement for the application is, users are able to download from this particular report. So bottom line, as I have your confirmation I assumed right , I'll make a customer authority object which hopefully only affects that one particular application.
Cheers,
Lukas
Similar Messages
-
Gui_download control_flush_error CRM Action
Hi ,
WE have created an action to generated document. In this we are using Gui_download function module. When we trigger the action from SAP Gui it is working fine.But when we trigger the same from Portal this throwing an Exception Control_flush_error.
Please help me in solving this.
jaffer vali shaik.Hey Rob,
Yeah, I did search the forums and found lots of threads which point to a "similar" direction; but I needed to make 100% sure I was assuming right technical-wise :-|
Inhouse Regulations prevent our authority experts to assign the authority object as it would enable users to download ANYTHING from ANY report... And yes, the requirement for the application is, users are able to download from this particular report. So bottom line, as I have your confirmation I assumed right , I'll make a customer authority object which hopefully only affects that one particular application.
Cheers,
Lukas -
When customising toolbar item only stays for current session, missing when Firefox is reopened
I want to add a 'Bookmarks' icon next to the 'Refresh' icon on the tool bar. When I customise and then click 'Done' the icon appears and functions correctly. The icon stays for the open session with Firefox. However after closing and then reloading the icon is not there. Any ideas please.
See this: <br />
https://support.mozilla.com/en-US/kb/Preferences+are+not+saved -
Event Trace Session missing for Failover Cluster
I have a failover cluster setup and is managed via a Windows Domain controller for the failover cluster network. I am troubleshooting a potential issue with the failover cluster and the recommendation is to go into event viewer, app & service
logs, Microsoft, windows and look for failover cluster diagnostics and operations logs and these do not exist.
It appears they are created by having an event trace session associated with windows failover clustering but apparently it was't created when the cluster was created for some reason. I am wondering how to create the proper event trace session
in order to get these additional failover cluster logs created?Hello,
the following forum mat be the better one for your needs:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverClustering
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
Checkbox for authenticated sessions missing in 3.6.3
I am a tech support person for users of Blackboard CE8, an online learning management system. We have told users of earlier Firefox versions to "Clear Private Data" and then check a box for authenticated sessions in order enable certain features of Blackboard. Now, it's "Clear Recent History" which I've done (again and again). There is nothing in 3.6.3 that pertains directly to "authenticated sessions." What, then, is the troubleshooting step in 3.6.3 that is *equivalent* to checking the box for authenticated sessions?
We ran this solution past the user with this problem, and it didn't take. We also tried these steps to ream out Java on the user's computer. (See the list of steps below). It still didn't take.
1. With no programs open, remove all versions of Java: Go to the Start menu, and choose Control Panel.
2. Open Add/Remove Programs (for Windows XP) or Uninstall Program (for Windows VISTA)
3. Remove ALL instances of Java.
4. Close all windows.
5. Install current version of Java: go to http://www.java.com/en/download/manual.jsp
6. Click the link Windows 7/XP/Vista/2000/2003/2008 Online ( http://javadl.sun.com/webapps/download/AutoDL?BundleId=39502 )
7. Choose Run and follow instructions to install Java.
8. After installation, open Firefox and go to your course.
9. Be sure that popups are enabled in your browser or disable your popup blocker.
10. If you receive a Security Alert popup window, choose "Always trust content from this publisher" and then press Run.
11. You can now try to browse your computer to add an attachment, to see if you can see the My Files icon.
We have since advised the user to try using Internet Explorer 8, which is certified for use with Blackboard CE8. This is clearly not a desirable option from Firefox perspective. -
Crashing, and restored session missing some tabs that were open.
I happen to get frequent crashes of Firefox.
It may have to do with having many tabs opens at once. (Maybe 150 or more). Is there a way you can verify if too many open tabs is causing crashes?
Then when I restart, and indicate to Firefox to do a restore, many times I will find that new tabs recently opened are not all restored.
Likewise, when I delete tabs, many times on a restore those 'deleted' tabs are 'restored' also!
I have tried to go though the tabs to delete them, thinking that fewer tabs might mean less crashes. But I have given up on that seeing that I often crash in the midst of doing deletions.
It's like a going in a circle.Hi Matt, crash reports are very hard to understand, and the ones you've submitted aren't directly associated with specific bugs, which makes the troubleshooting more of a challenge.
The first report seems associated with an "out of memory" (OOM) condition, and occurred after Firefox has been "up" for over 6 hours (although you were not necessarily active during that time). Firefox has a page called about:memory with buttons you can use to reduce Firefox's use of memory. Unfortunately, OOM crashes can be unpredictable and I don't know how to recommend you go about using that tool. You could try using it every 4 hours to see whether that makes any difference.
For the second one, the involvement of fslsp.dll indicates a problem between Firefox and your F-Secure extension. Please make sure F-Secure is as up-to-date as possible, and/or consider disabling this extension. Please see this thread for past discussion on that: [https://support.mozilla.org/questions/968603 FireFox chrashes several times an hour].
Third and fourth reports, no insight.
Fifth report hints at a connection to SPDY, a protocol some websites use for faster communications. You can disable SPDY in about:config and see whether that helps.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''spdy''' and pause while the list is filtered
I haven't researched the newer preferences on this list, but I suppose it's worth trying to disable all 3:
* network.http.spdy.enabled
* network.http.spdy.enabled.v2
* network.http.spdy.enabled.v3 -
JSP session getting destroyed when second user logs in
Hi,
I am facing a session related problem in a small login program in jsp. I am using three jsp pages, login.jsp (user logs in), page1.jsp (creates a session and stores username) and page2.jsp (accesses session).
Login.jsp:
No jsp actually. Just a simple html form.
Page1.jsp:
String name=request.getParameter("Name");
session=request.getSession(true);
session.setAttribute("Name",name);
Page2.jsp:
session=request.getSession(false);
if(session.isNew())
System.out.println("new session created");
String name=session.getAttribute("Name").toString();
As expected, it works like session getting set at page1 and used at page2. It works good if users log in one by one. The problem arises when 2 (or more users with different logins) try to access the page at same time. When a new user logs in, the previous user session gets destroyed (session.isNew() becomes true and session Id changes).
Is it the way I am using sessions (missing something), or there is some setting in tomcat server to specify maximum number of logins (sessions that can be handled).
Regards
KamalHi,
Thanks for reply, but I guess the problem is not clear. Let me explain..
A user logs in, he reaches first page (page1.jsp), here session is getting set. Then user goes to page2.jsp where application retrieves the information from session and uses it. It works all well.
When two (or more) user logs in.. First user logs in, he reaches page 1, session is set. But then another user logs in (different id) and a session is set for him as well. Now the problem here is that session for first user gets destroyed at this point, which is unexpected (two sessions should not conflict, on different machines).
Additionally, the problem does not happen necessarily at second login. eg. sometimes 4 users log in and when fifth one logs in, fourth gets logged out (session gets destroyed).
I am not able to figure out, whether the problem is in code (given in first post) or there is some tomcat setting responsible for this behavior.
Regards
Kamal -
ISE 1.2 issue with CWA (Error : Your session has expired)
Hii
we have ISE deployment with two administration nodes and two service policy nodes running 1.2.1.198 , with CWA for wireless guest users (Cisco WLC) . Suddenly , many guest users faced an issue where login page is redirected but after inserting user/password it gave ""Your session has expired. Sign on again""
authentication logs on ISE shows:
Event 5418 Guest Authentication Failed
Failure Reason 86017 Session Missing
Resolution Please contact your Administrator
Root cause SessionID is missing. Please contact your System Administrator
we suspected the bug CSCul10677 , but it is fixed in 1.2.1.198 . We reloaded the two service policy nodes and that resolved the issue temporarily , but it showed back after couple of hours . The issue appeared with some users not all , and with no specific devies or operating systems.
Any idea ?
Regards,
MohammadPlease refer the link : https://supportforums.cisco.com/discussion/12131531/ise-12-guest-access-session-expired
Workaround:
Terminate session from admin UI and type in the original URL to redirect to guest portal with a new session-id.
Disconnect SSID, wait for a few minutes, reconnect and enter the original URL to redirect to guest portal with the new session-id. -
ISE 1.2 web authentication problem with wired clients
Hello,
i am having problems with centralized web authentication using a Catalyst 3650X with IOS 15.0.2 SE01 and ISE 1.2.
Redirecting the client works fine, but as soon the client opens a web browser and ISE websites open to authenticate the client, the switch port resets, the authentication process restarts and the session ID changes. After the client enters the credentials a session expired messages appears on the client and i get an 86017 Session Missing message in ISE.
here the output form the debug aaa coa log.
Any ideas
thanks in advanced
Alex
! CLIENT CONNECT TO SWITCHPORT
ISE-TEST-SWITCH#show authentication sessions interface gi0/3
Interface: GigabitEthernet0/3
MAC Address: 001f.297b.bd82
IP Address: 10.2.12.45
User-Name: 00-1F-29-7B-BD-82
Status: Authz Success
Domain: DATA
Security Policy: Should Secure
Security Status: Unsecure
Oper host mode: multi-auth
Oper control dir: both
Authorized By: Authentication Server
Vlan Policy: N/A
ACS ACL: xACSACLx-IP-PERMIT_ALL_TRAFFIC-537cb1d6
URL Redirect ACL: ACL-WEBAUTH-REDIRECT
URL Redirect: https://nos-ch-wbn-ise1.nosergroup.lan:8443/guestportal/gateway?sessionId=AC1484640000026B28C02CDC&action=cwa
Session timeout: N/A
Idle timeout: N/A
Common Session ID: AC1484640000026B28C02CDC
Acct Session ID: 0x0000029C
Handle: 0x8C00026C
Runnable methods list:
Method State
dot1x Failed over
mab Authc Success
! CLIENT OPENS INTERNETEXPLORER -> REDIRECTS TO ISE
! SWITCHPORT GOES IN ADMINISTRATIVE DOWN STARTS AUTHENTICATION AGAIN
ISE-TEST-SWITCH#
191526: .Jun 24 10:42:24.340 UTC: COA: 10.0.128.38 request queued
191527: .Jun 24 10:42:24.340 UTC: RADIUS: authenticator 7F A9 85 AB F6 4A D0 F3 - B4 E6 F2 56 74 C6 2D 33
191528: .Jun 24 10:42:24.340 UTC: RADIUS: NAS-IP-Address [4] 6 172.20.132.100
191529: .Jun 24 10:42:24.340 UTC: RADIUS: Calling-Station-Id [31] 19 "00:1F:29:7B:BD:82"
191530: .Jun 24 10:42:24.340 UTC: RADIUS: Acct-Terminate-Cause[49] 6 admin-reset [6]
191531: .Jun 24 10:42:24.340 UTC: RADIUS: Event-Timestamp [55] 6 1403606529
191532: .Jun 24 10:42:24.340 UTC: RADIUS: Message-Authenticato[80] 18
191533: .Jun 24 10:42:24.340 UTC: RADIUS: E0 3C B2 8C 89 47 67 A8 69 F5 3D 08 61 FF 53 6E [ <Ggi=aSn]
191534: .Jun 24 10:42:24.340 UTC: RADIUS: Vendor, Cisco [26] 43
191535: .Jun 24 10:42:24.340 UTC: RADIUS: Cisco AVpair [1] 37 "subscriber:command=bounce-host-port"
191536: .Jun 24 10:42:24.340 UTC: COA: Message Authenticator decode passed
191537: .Jun 24 10:42:24.340 UTC: ++++++ CoA Attribute List ++++++
191538: .Jun 24 10:42:24.340 UTC: 06D96C58 0 00000001 nas-ip-address(600) 4 172.20.132.100
191539: .Jun 24 10:42:24.349 UTC: 06D9AC18 0 00000081 formatted-clid(37) 17 00:1F:29:7B:BD:82
191540: .Jun 24 10:42:24.349 UTC: 06D9AC4C 0 00000001 disc-cause(434) 4 admin-reset
191541: .Jun 24 10:42:24.349 UTC: 06D9AC80 0 00000001 Event-Timestamp(445) 4 1403606529(53A95601)
191542: .Jun 24 10:42:24.349 UTC: 06D9ACB4 0 00000081 ssg-command-code(490) 1 33
191543: .Jun 24 10:42:24.349 UTC:
191544: .Jun 24 2014 10:42:24.365 UTC: %EPM-6-IPEVENT: IP 10.2.12.45| MAC 001f.297b.bd82| AuditSessionID AC1484640000026B28C02CDC| AUTHTYPE DOT1X| EVENT IP-RELEASE
191545: .Jun 24 2014 10:42:24.382 UTC: %EPM-6-IPEVENT: IP 10.2.12.45| MAC 001f.297b.bd82| AuditSessionID AC1484640000026B28C02CDC| AUTHTYPE DOT1X| EVENT IP-WAIT
191546: .Jun 24 2014 10:42:24.382 UTC: %EPM-6-POLICY_REQ: IP 0.0.0.0| MAC 001f.297b.bd82| AuditSessionID AC1484640000026B28C02CDC| AUTHTYPE DOT1X| EVENT REMOVE
191547: .Jun 24 2014 10:42:24.390 UTC: %EPM-6-AUTH_ACL: POLICY Auth-Default-ACL-OPEN| EVENT DETACH-SUCCESS
191548: .Jun 24 2014 10:42:26.353 UTC: %LINK-5-CHANGED: Interface GigabitEthernet0/3, changed state to administratively down
191549: .Jun 24 2014 10:42:27.359 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/3, changed state to down
ISE-TEST-SWITCH#
191550: .Jun 24 2014 10:42:36.366 UTC: %LINK-3-UPDOWN: Interface GigabitEthernet0/3, changed state to down
191551: .Jun 24 10:42:40.592 UTC: AAA/BIND(000002A7): Bind i/f
191552: .Jun 24 2014 10:42:41.129 UTC: %AUTHMGR-5-START: Starting 'dot1x' for client (001f.297b.bd82) on Interface Gi0/3 AuditSessionID AC1484640000026C28C2FA05
191553: .Jun 24 2014 10:42:42.580 UTC: %LINK-3-UPDOWN: Interface GigabitEthernet0/3, changed state to up
191554: .Jun 24 2014 10:42:43.586 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/3, changed state to up
! SESSION ID CHANGES, USER ENTERS CREDENTIALS
! ERROR MESSAGE AT CLIENT "YOUR SESSION HAS EXPIRED"
! ERROR MESSAGE IN ISE "86017 SESSION MISSING"
ISE-TEST-SWITCH#show authentication sessions interface gi0/3
Interface: GigabitEthernet0/3
MAC Address: 001f.297b.bd82
IP Address: 10.2.12.45
Status: Running
Domain: UNKNOWN
Security Policy: Should Secure
Security Status: Unsecure
Oper host mode: multi-auth
Oper control dir: both
Session timeout: N/A
Idle timeout: N/A
Common Session ID: AC1484640000026C28C2FA05
Acct Session ID: 0x0000029D
Handle: 0x2C00026D
Runnable methods list:
Method State
dot1x Running
mab Not runGuest authentication failed: 86017: Session cache entry missing
try adjusting the UTC timezone during the guest creation in the sponsor portal.
86017
Guest
Session Missing
Session ID missing. Please contact your System Administrator.
Info -
Beginner help to send an email from PHP
I hope this isn't too easy to answer - I think I must be doing something fairly simple wrong.
I want to send an email from a PHP page, using SOAP so the mail appears in the sender's sent items, as if it was done in the usual way.
We're using Groupwise 8.02
Using the example code in phpClient/phpClient.php I have got a list of folders/emails in my mailbox, so the authentication and access to Groupwise is obviously working. However, in that file there isn't a send mail example, so I copied the one from phpSOAP/client.php and it doesn't work.....the error seems to be 59920 which might be something to do with the session missing, but I find this hard to believe since the folders can be retrieved with the same object.
Here is the code for mail sending I'm using:
$mail = new Mail();
$mail->subject = "php item";
$dist = new Distribution();
$from = new From();
$from->displayName = "Paul Green";
$from->email = "[email protected]";
$dist->from = "[email protected]";;
$dist->to = "Paul Green";
$rlist = new RecipientList();
$recip1 = new Recipient();
$recip1->displayName = "Peter";
$recip1->email = "[email protected]";
$recip2 = new Recipient();
$recip2->displayName = "Andy";
$recip2->email = "[email protected]";
$rlist->recipient = array ($recip1, $recip2);
$dist->recipients = $rlist;
$mail->distribution = $dist;
$mp = new MessagePart();
$mp->_ = "This is a test!";
$mb = new MessageBody();
$mb->part = $mp;
$mail->message = $mb;
$sir = new sendItemRequest();
$sir->item = $mail;
$sires = $gwservice->sendItemRequest($sir);
Looking around, it seems to me that some of the objects haven't got the properties that the above code expects (eg the from object), so is the schema wrong somewhere?
What I would like, but couldn't find, is some simple example code that works!
Does anyone know the simplest way to send an email via SOAP?
Many thanks in advance for any help anyone can give.
Paul Green
Barton Peveril College
Eastleigh
Hampshire
UKThe phpClient code was a proof of concept.
I only hand fixed a few of the requests.
If you use that code, you will need to go into each
request you want to use and put in code to put in the
session string. You need to do that in GroupWiseService.php.
You may need to modify the individual files, ie Filter.php.
The phpSOAP code works better / easier. You shouldn't have
to modify that code. (You should be able to just use it.)
That said, I only did a spot check. The code is as is. There
is no support for it.
Preston
>>> On Friday, June 29, 2012 at 9:56 AM,
PaulGreen77<[email protected]> wrote:
> Thanks for the suggestions. I tried the phpClient code you suggested,
> but it didn't work at all. I don't quite understand what you say about
> setting the session header string; I think my code does this already.
>
> Early on in the code, after logging in, I have the following line
> $gwservice‑>session = $lres['session'];
> Doesn't this set the session as part of the Groupwise service?
>
> You said I need to manually set the session header string, but which
> objects do i need to do it in? And can I do it as a parameter call, or
> does it need to be done in GroupwiseService.php?
>
> I hope this doesn't make me sound too silly, but I am a bit of a novice
> with OO programming!
>
> Another point: at various places in the code,
> http://schemas.novell.com/2005/01/Gr...groupwise.wsdl is referred
> to, but when I type this into a web browser, it says it can't be found?
> Does this matter?
>
> I hope you can help me a bit further!
>
> Thanks.
>
> Paul
>
> Preston Stephenson;2203363 Wrote:
>> If you can use php 3.x, use the phpSOAP example instead.
>> ftp://sdk.provo.novell.com/ndk/gwsoa...rm/phpSOAP.ZIP
>>
>> It will handle setting the session string header automatically.
>> If you use the phpClient example, you will have to go in to
>> GroupwiseService.php
>> and manually set the session header string in each request you want to
>> use.
>> See getFolderListRequest().
>>
>> Preston
>>
>> >>> On Friday, June 22, 2012 at 9:56 AM,
>> PaulGreen77<PaulGreen77@no‑mx.forums.novell.com> wrote:
>>
>> > I hope this isn't too easy to answer ‑ I think I must be doing
>> something
>> > fairly simple wrong.
>> > I want to send an email from a PHP page, using SOAP so the mail
>> appears
>> > in the sender's sent items, as if it was done in the usual way.
>> > We're using Groupwise 8.02
>> >
>> > Using the example code in phpClient/phpClient.php I have got a list
>> of
>> > folders/emails in my mailbox, so the authentication and access to
>> > Groupwise is obviously working. However, in that file there isn't a
>> send
>> > mail example, so I copied the one from phpSOAP/client.php and it
>> doesn't
>> > work.....the error seems to be 59920 which might be something to do
>> with
>> > the session missing, but I find this hard to believe since the
>> folders
>> > can be retrieved with the same object.
>> >
>> > Here is the code for mail sending I'm using:
>> >
>> > $mail = new Mail();
>> > $mail‑>subject = "php item";
>> > $dist = new Distribution();
>> > $from = new From();
>> > $from‑>displayName = "Paul Green";
>> > $from‑>email = "[email protected]";
>> > $dist‑>from = "[email protected]";;
>> > $dist‑>to = "Paul Green";
>> > $rlist = new RecipientList();
>> > $recip1 = new Recipient();
>> > $recip1‑>displayName = "Peter";
>> > $recip1‑>email = "[email protected]";
>> > $recip2 = new Recipient();
>> > $recip2‑>displayName = "Andy";
>> > $recip2‑>email = "[email protected]";
>> > $rlist‑>recipient = array ($recip1, $recip2);
>> > $dist‑>recipients = $rlist;
>> > $mail‑>distribution = $dist;
>> > $mp = new MessagePart();
>> > $mp‑>_ = "This is a test!";
>> > $mb = new MessageBody();
>> > $mb‑>part = $mp;
>> > $mail‑>message = $mb;
>> > $sir = new sendItemRequest();
>> > $sir‑>item = $mail;
>> > $sires = $gwservice‑>sendItemRequest($sir);
>> >
>> > Looking around, it seems to me that some of the objects haven't got
>> the
>> > properties that the above code expects (eg the from object), so is
>> the
>> > schema wrong somewhere?
>> > What I would like, but couldn't find, is some simple example code
>> that
>> > works!
>> > Does anyone know the simplest way to send an email via SOAP?
>> >
>> > Many thanks in advance for any help anyone can give.
>> >
>> > Paul Green
>> > Barton Peveril College
>> > Eastleigh
>> > Hampshire
>> > UK -
AFP client "connection failed 32" - 10.4.7 AD bound client & server
Please, can anyone help with this?
Two G5s, clean installed, one as 10.4.7 client, other as 10.4.7 server. Both machines bound to company's MS AD. AD machine logins fine. AD lookups etc all working fine. DNS Forward and Reverse on server fine. Nothing else installed on either machine, no settings meddled with. Bound to AD with default settings.
Problem: When client attempts to connect to AFP shared volume on the server, message "Connection failed 32" appears. On first attempt after client reboot to connect to the share, the credentials pane appears (Domain, blah...) then, after OKing, the dreaded "Connection failed 32" message appears. Subsequent attempts to connect during the same session misses out the creds pane and returns only the 32 error message. I've looked up Apple's error codes but 32 doesn't exist.
Any non-AD bound client on the same network can connect to the same share fine via AFP, even LDAP clients using their AD creds.
I'd just config all the clients for LDAP to get round this but there are several reasons why that's a no no (mostly company security policy). It's either get all Macs fully AD bound or take them off the network.
Kerberos is used. Is this problem related to that? Sorry but I'm not a Mac or Networking Guru so I don't know which logs etc. to look at. Any help at all would be most appreciated - can't begin to tell you the hassle this is causing.
It would be something to find anyone with the same problem at least.
Thanks.A development on this:
By setting the Authentication method (Server Admin, AFP, Settings, Access) to Standard, rather than Kerberos or Any, clients can now mount the share OK, and still using their AD user credentials rather than a server local account.
Not sure what the security implications for this method are. Or is that just a red herring anyway? As long as the users are authenticated against our AD (via Kerberos) I'm happy for now.
Now then, if only Apple's SMB server would allow our PC clients to connect to the Mac shares I'll be fully home and dry. Come on Apple, where is SMB signing? Thursby have it. And don't tell me I can just disable it on the MS AD servers - absolutely no chance of that in a corporate PC network. And please don't tell me I can use DAVE to do the SMB sharing - it handles the signing but slows down AFP access to a crawl when everyone logs in. -
Error: Missing initial value for session parameter
Hi,
I'm facing a problem while running the ETL process for Complete 11.5.10 Execution Plan in DAC Client. Some tasks are getting failed beacuse of the following error:-
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: VAR_27026 [Error: Missing initial value for session parameter:[$DBConnection_OLAP].].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6270 [Error: Variable parameter expansion error.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6163 [Error initializing variables and parameters for the paritition.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6226 [ERROR: Failed to initialize session [SDE_ORA_Product_Category_Derive_Full]].
ERROR : LM_36320 [Mon Nov 19 21:02:08 2007] : (2108|2632) Session task instance [SDE_ORA_Product_Category_Derive_Full]: Execution failed.
When i checked the parameter file i can see the value assigned to the $DBConnection_OLAP. The same tasks ran successfully when i ran the ETL process for Complete 11.5.10 for the first time. I did not change anything after that and also all these are came built-in with the installation of Oracle BI Applications.
Please anyone give me an idea what is causing the problem.
Thanks,in DAC > Run History > Task Details, query
Name = SDE_ORA_Product_Category_Temporary
Open Status Description, look for string -lpf, the file after it is the actual parameter file DAC send to INFA server. E.g
-lpf D:\DACTOPUS\Informatica\parameters\SDE_ORAR12_Adaptor.SDE_ORA_Product_Category_Temporary.txt
Open the parameter file, most likely the [session_name] does not match with SDE_ORA_Product_Category_Derive_Full or some parameters are missing. -
ORA-00026: missing or invalid session ID
I am receiving following error, while executing a procedure kill_session
EXEC kill_session('USERNAME');
4329 267 TARIQ_CORE
ORA-00026: missing or invalid session ID
create or replace
procedure kill_session (usr_2_kill in varchar2)
as
vsid number(6);
vserial number(6);
begin
for s_info in (select * from v$session where username=usr_2_kill)
loop
vsid := s_info.sid;
vserial := s_info.serial#;
dbms_output.put_line(vsid||' '||vserial||' '||usr_2_kill);
execute immediate 'alter system kill session(:v1,:v2) immediate' using vsid,vserial;
end loop;
EXCEPTION
WHEN OTHERS
THEN
dbms_output.put_line(SQLERRM);
END;malhi wrote:
I am receiving following error, while executing a procedure kill_session
EXEC kill_session('USERNAME');
4329 267 TARIQ_CORE
ORA-00026: missing or invalid session ID
create or replace
procedure kill_session (usr_2_kill in varchar2)
as
vsid number(6);
vserial number(6);
begin
for s_info in (select * from v$session where username=usr_2_kill)
loop
vsid := s_info.sid;
vserial := s_info.serial#;
dbms_output.put_line(vsid||' '||vserial||' '||usr_2_kill);
execute immediate 'alter system kill session(:v1,:v2) immediate' using vsid,vserial;
end loop;
EXCEPTION
WHEN OTHERS
THEN
dbms_output.put_line(SQLERRM);
END;
Check your syntax ... it's wrong.
TUBBY_TUBBZ?alter system kill session (99,16840);
alter system kill session (99,16840)
ERROR at line 1:
ORA-00026: missing or invalid session ID
Elapsed: 00:00:00.89
TUBBY_TUBBZ?alter system kill session '99,16840';
System altered.
Elapsed: 00:00:00.57
TUBBY_TUBBZ? -
Data missing while downloading the data using GUI_DOWNLOAD
Hi experts,
I'm uploading the Production Order data through excel and in the transaction level it's happening fine.
After running the BDC I'm fetching the Production Order Number(AUFNR) and it's Status from the respective tables and downloading the data along with the Production Order Number(AUFNR) and it's Status using GUI_DOWNLOAD. (Version is 4.6 C)
After downloading some of the Production Order Numbers(AUFNR) and it's Status are missing in the Excel Log sheet . But it's very much there in the SAP tables and also in the transaction screen level.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = v_bin_filesize
filename = v_name
filetype = 'ASC'
write_field_separator = 'X'
TABLES
data_tab = it_final
EXCEPTIONS
file_write_error = 1
no_batch = 2
OTHERS = 22.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Kindly give me your suggestions regarding this.
Thanks in advance.
JessiHi,
I am not sure why it is not coming .
But try by uncomment the bin_filesize.
Because generally the size(bin_filesize) specification is for binary files .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*bin_filesize = v_bin_filesize "Comment This
filename = v_name
filetype = 'ASC'
write_field_separator = 'X'
TABLES
data_tab = it_final.
Regards,
Raghava Channooru -
CONTROL_FLUSH_ERROR when using 'GUI_DOWNLOAD' Function Module in foreground
Hi,
I am using function module 'GUI_DOWNLOAD' in foreground mode with APPEND = 'X' ( I need to add infomration to file ).
In most of the cases it works good but in some cases ( which I cannot isolate ) - I am getting CONTROL_FLUSH_ERROR exception. Do you have any ideas where can be the problem?
Thanks in advance,
AnnaYou will get "CONTROL_FLUSH_ERROR " error when there is some problem with SAP GUI. Check your Gui installation and if possible uninstall the exixting GUI and reinstall the new GUI from fresh.
or you can use the below code
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING bin_filesize = l_xml_size
filename = 'c:tempflights.xml'
filetype = 'BIN'
CHANGING data_tab = l_xml_table
EXCEPTIONS OTHERS = 24.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Maybe you are looking for
-
Lost data after upgrade to Lion
Hi. I recently upgraded to Lion on my Macbook Pro and after a crash, my data was lost. The documents and downloads folders were empty. Fortunately I have a PC backup of the data and when I tried to restore the music to Itunes I was getting error mess
-
Handling "NOT NULL" in forms(4.5)
Hi everbody, I am working in forms4.5,oracle 7.3 in winNT. I had some columns which were defined as NOT NULLs in the database. When I tried loading data into them I got an error.I found that there were no values for those columns in the datafile. So
-
Hey all, After downloading the last lot of updates for my eMac, I have had problems with the eject button on the keyboard. It works, except you have to hold it down longer. I've spoken to a couple other people who had similar issues. And just this we
-
How to create a Tree menu?
Hi, I need to create a tree menu navigation in ABAP dialog screen. How do i do it? Any guide / sample code for reference? Regards, Rayden
-
Updated Software, now running slower.
I updated the software on my iPhone 3G to Version 4. I've noticed that the phone is now operating slower than it did before the update. Is there any reason for this?