Gvfs listed in mounts but I didn't set it up?

When I issue mount, I started to see this line:
gvfs-fuse-daemon on /home/user/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=user)
The line wouldn't come up before (before what? I don't know... I noticed it yesterday...) I can umount it, but it gets mounted either at boot randomly (I umounted and rebooted a few times but did not see it coming up on boot) or after I do something. All I do in this system is browse the web (firefox & chromium), use org-notes in emacs, and sync its files via dropbox..
I'm using fluxbox.
gvfs is not listed in df.
Any ideas what might have activated it or something? Here's my pacman.log from a week ago:
[2010-01-15 02:19] starting full system upgrade
[2010-01-15 02:21] upgraded dhcpcd (5.1.3-1 -> 5.1.4-1)
[2010-01-15 02:21] upgraded fakeroot (1.14.3-1 -> 1.14.4-1)
[2010-01-15 02:21] upgraded x264 (20090416-1 -> 20100107-1)
[2010-01-15 02:21] installed opencore-amr (0.1.2-1)
[2010-01-15 02:21] installed libvdpau (0.3-2)
[2010-01-15 02:21] upgraded ffmpeg (0.5-1 -> 20100108-2)
[2010-01-15 02:21] upgraded mkinitcpio (0.5.26-1 -> 0.5.28-1)
[2010-01-15 02:21] installed talloc (2.0.1-1)
[2010-01-15 02:21] upgraded tdb (3.4.3-4 -> 1.2.0-1)
[2010-01-15 02:21] upgraded smbclient (3.4.3-4 -> 3.4.4-1)
[2010-01-15 02:21] upgraded mplayer (29776-1 -> 30286-1)
[2010-01-15 02:21] upgraded patch (2.6-1 -> 2.6.1-1)
[2010-01-15 02:21] upgraded perl-html-parser (3.62-1 -> 3.64-1)
[2010-01-15 02:21] upgraded perl-xyne-common (1.0.3-1 -> 1.0.4-1)
[2010-01-15 02:21] [1;31mWarning[0;39m
[2010-01-15 02:21] Most of the modules in perl-xyne-arch have been rewritten for version 1.0. This
[2010-01-15 02:21] has led to changes in several packages which provide frontends to these modules,
[2010-01-15 02:21] most importantly powerpill, pkgd, rebase and reflector.
[2010-01-15 02:21]
[2010-01-15 02:21] Please check the help messages and man pages of these packages for option and
[2010-01-15 02:21] configuration changes.
[2010-01-15 02:21] upgraded perl-xyne-arch (1.0.25-1 -> 1.0.38-1)
[2010-01-15 02:21] >>> The kernel-mode plugin has a new place.
[2010-01-15 02:21] >>> It's now located under /usr/lib/rp-pppoe/rp-pppoe.so
[2010-01-15 02:21] >>> Change LINUX_PLUGIN to the new path in your /etc/ppp/pppoe.conf
[2010-01-15 02:21] upgraded rp-pppoe (3.10-1 -> 3.10-2)
[2010-01-15 02:21] upgraded vlc (1.0.4-1 -> 1.0.4-3)
[2010-01-17 02:54] synchronizing package lists
[2010-01-17 02:55] starting full system upgrade
[2010-01-17 02:59] upgraded expat (2.0.1-4 -> 2.0.1-5)
[2010-01-17 02:59] warning: /etc/group installed as /etc/group.pacnew
[2010-01-17 02:59] adding new group: rfkill
[2010-01-17 02:59] upgraded filesystem (2009.11-1 -> 2010.01-1)
[2010-01-17 02:59] upgraded libxfcegui4 (4.6.1-1 -> 4.6.2-1)
[2010-01-17 02:59] upgraded live-media (2010.01.11-1 -> 2010.01.13-1)
[2010-01-17 02:59] upgraded smbclient (3.4.4-1 -> 3.4.4-1.1)
[2010-01-17 02:59] upgraded mplayer (30286-1 -> 30325-1)
[2010-01-17 02:59] upgraded perl-libwww (5.833-2 -> 5.833-3)
[2010-01-17 02:59] upgraded perl-xyne-common (1.0.4-1 -> 1.0.6-1)
[2010-01-17 02:59] upgraded xfsprogs (3.0.5-1 -> 3.1.0-1)
[2010-01-18 21:18] synchronizing package lists
[2010-01-18 21:39] synchronizing package lists
[2010-01-18 21:40] starting full system upgrade
[2010-01-18 22:11] synchronizing package lists
[2010-01-18 22:11] starting full system upgrade
[2010-01-18 22:11] upgraded iproute2 (2.6.29-3 -> 2.6.31-1)
[2010-01-18 22:11] upgraded perl-libwww (5.833-3 -> 5.834-1)
[2010-01-18 22:11] [1;31mWarning[0;39m
[2010-01-18 22:11] Most of the modules in perl-xyne-arch have been rewritten for version 1.0. This
[2010-01-18 22:11] has led to changes in several packages which provide frontends to these modules,
[2010-01-18 22:11] most importantly powerpill, pkgd, rebase and reflector.
[2010-01-18 22:11]
[2010-01-18 22:11] Please check the help messages and man pages of these packages for option and
[2010-01-18 22:11] configuration changes.
[2010-01-18 22:11] upgraded perl-xyne-arch (1.0.38-1 -> 1.0.41-1)
[2010-01-18 22:11] upgraded psmisc (22.8-1 -> 22.10-1)
[2010-01-18 22:11] upgraded python-urwid (0.9.8.4-1 -> 0.9.9-1)
[2010-01-18 22:11] upgraded rasqal (0.9.16-1 -> 0.9.17-1)
[2010-01-18 22:11] installed unixodbc (2.2.14-2)
[2010-01-18 22:11] upgraded redland (1.0.9-4 -> 1.0.10-1)
[2010-01-18 22:11] upgraded xfconf (4.6.1-2 -> 4.6.1-3)
[2010-01-18 22:11] upgraded zlib (1.2.3.4-3 -> 1.2.3.4-4)
[2010-01-19 01:43] synchronizing package lists
[2010-01-19 01:44] starting full system upgrade
[2010-01-19 01:48] synchronizing package lists
[2010-01-19 01:48] upgraded wicd (1.6.2.2-3 -> 1.7.0-1)
[2010-01-19 01:49] synchronizing package lists
[2010-01-19 01:49] synchronizing package lists
[2010-01-19 01:49] starting full system upgrade
[2010-01-19 02:02] upgraded wicd (1.7.0-1 -> 1.6.2.2-3)
[2010-01-19 14:23] synchronizing package lists
[2010-01-19 14:23] starting full system upgrade
[2010-01-19 20:29] synchronizing package lists
[2010-01-19 20:29] synchronizing package lists
[2010-01-19 21:06] synchronizing package lists
[2010-01-19 21:06] starting full system upgrade
[2010-01-19 21:09] upgraded farsight2 (0.0.16-1 -> 0.0.17-1)
[2010-01-19 21:09] [1;31mWarning[0;39m
[2010-01-19 21:09] Most of the modules in perl-xyne-arch have been rewritten for version 1.0. This
[2010-01-19 21:09] has led to changes in several packages which provide frontends to these modules,
[2010-01-19 21:09] most importantly powerpill, pkgd, rebase and reflector.
[2010-01-19 21:09]
[2010-01-19 21:09] Please check the help messages and man pages of these packages for option and
[2010-01-19 21:09] configuration changes.
[2010-01-19 21:09] upgraded perl-xyne-arch (1.0.41-1 -> 1.0.42-1)
[2010-01-19 21:09] upgraded smartmontools (5.38-2 -> 5.39-1)
[2010-01-19 21:09] upgraded smbclient (3.4.4-1.1 -> 3.4.5-1.1)
[2010-01-19 21:09] upgraded wicd (1.6.2.2-3 -> 1.7.0-1)
[2010-01-20 20:53] synchronizing package lists
[2010-01-20 20:54] starting full system upgrade
[2010-01-20 20:55] synchronizing package lists
[2010-01-20 20:55] starting full system upgrade
[2010-01-20 21:05] upgraded coreutils (8.2-1 -> 8.4-1)
[2010-01-20 21:05] upgraded kernel26-firmware (2.6.32.3-1 -> 2.6.32.4-1)
(mkinitcpio ...)
[2010-01-20 21:07] upgraded kernel26 (2.6.32.3-1 -> 2.6.32.4-1)
[2010-01-20 21:07] upgraded kernel26-headers (2.6.32.3-1 -> 2.6.32.4-1)
[2010-01-20 21:07] upgraded perl-xyne-common (1.0.6-1 -> 1.0.7-1)
[2010-01-20 21:07] [1;31mWarning[0;39m
[2010-01-20 21:07] Most of the modules in perl-xyne-arch have been rewritten for version 1.0. This
[2010-01-20 21:07] has led to changes in several packages which provide frontends to these modules,
[2010-01-20 21:07] most importantly powerpill, pkgd, rebase and reflector.
[2010-01-20 21:07]
[2010-01-20 21:07] Please check the help messages and man pages of these packages for option and
[2010-01-20 21:07] configuration changes.
[2010-01-20 21:07] upgraded perl-xyne-arch (1.0.42-1 -> 1.0.44-1)
[2010-01-20 21:07] upgraded skype (2.1.0.47-2 -> 2.1.0.81-2)
[2010-01-21 01:59] installed gparted (0.5.0-1)
[2010-01-21 11:35] upgraded skype (2.1.0.81-2 -> 2.1.0.47-2)
[2010-01-21 11:51] synchronizing package lists
[2010-01-21 11:51] starting full system upgrade
[2010-01-21 11:51] upgraded blueman (1.21-1 -> 1.21-2)
[2010-01-22 16:05] synchronizing package lists
[2010-01-22 16:05] starting full system upgrade
[2010-01-22 16:06] synchronizing package lists
[2010-01-22 16:06] starting full system upgrade
[2010-01-22 16:06] upgraded dosfstools (3.0.6-1 -> 3.0.7-1)
[2010-01-22 16:06] upgraded perl-xyne-arch (1.0.44-1 -> 1.0.45-1)
[2010-01-22 16:06] upgraded tzdata (2009t-1 -> 2010a-1)
[2010-01-22 19:16] synchronizing package lists
[2010-01-22 19:16] starting full system upgrade
[2010-01-22 19:20] upgraded wine (1.1.36-1 -> 1.1.37-1)
[2010-01-22 20:29] synchronizing package lists
[2010-01-22 20:29] starting full system upgrade
[2010-01-22 21:49] synchronizing package lists
[2010-01-22 21:49] starting full system upgrade
[2010-01-22 21:51] synchronizing package lists
[2010-01-22 21:51] starting full system upgrade
[2010-01-22 21:57] synchronizing package lists
[2010-01-22 21:58] starting full system upgrade
[2010-01-22 22:04] warning: /usr/share/texmf-config/web2c/updmap.cfg installed as /usr/share/texmf-config/web2c/updmap.cfg.pacnew
[2010-01-22 22:04] upgraded texlive-bin (2009.4-3 -> 2009.5-1)
[2010-01-22 22:04] >>> texlive: updating the filename database...
[2010-01-22 22:05] >>> texlive: updating the fontmap files with updmap...
[2010-01-22 22:05] done.
[2010-01-22 22:06] recreating all formats... done.
[2010-01-22 22:06] (logs are under /usr/share/texmf-var/web2c/<engine>/<formatname>.log)
[2010-01-22 22:06] upgraded texlive-core (2009.15574-1 -> 2009.16776-1)
[2010-01-22 22:06] >>> texlive: updating the filename database...
[2010-01-22 22:06] upgraded texlive-bibtexextra (2009.15542-1 -> 2009.16287-1)
[2010-01-22 22:06] >>> texlive: updating the filename database...
[2010-01-22 22:06] >>> texlive: updating the fontmap files with updmap...
[2010-01-22 22:06] done.
[2010-01-22 22:06] upgraded texlive-latexextra (2009.15565-1 -> 2009.16666-1)
[2010-01-22 22:06] >>> texlive: updating the filename database...
[2010-01-22 22:06] upgraded texlive-humanities (2009.15113-1 -> 2009.16540-1)
[2010-01-22 22:06] >>> texlive: updating the filename database...
[2010-01-22 22:06] upgraded texlive-pstricks (2009.15032-1 -> 2009.16633-1)
[2010-01-22 22:54] synchronizing package lists
[2010-01-22 22:54] starting full system upgrade
Edit:
I did this to remove gvfs, but I don't know if this is good practice, becaue I don't know what I'm doing with gvfs:
$ sudo pacman -R gvfs libgnome libbonoboui libgnomeui etherape gnome-python gufw
checking dependencies...
(1/7) removing gufw [#############################################] 100%
(2/7) removing gnome-python [#############################################] 100%
(3/7) removing etherape [#############################################] 100%
(4/7) removing libgnomeui [#############################################] 100%
(5/7) removing libbonoboui [#############################################] 100%
(6/7) removing libgnome [#############################################] 100%
(7/7) removing gvfs [#############################################] 100%
please advise
Last edited by vajorie (2010-01-23 23:37:03)

gufw > gnome-python > libgnomeui > libbonoboui > libgnome > gvfs
etherape > libgnomeui > libbonoboui > libgnome > gvfs
On the front page of archlinux.org you can do a package search and get this as a result: http://www.archlinux.org/packages/community/i686/gufw/
Then follow the dependencies. You can also see dependencies with pacman -Qi gufw.
For gvfs, it is a virtual filesystem. It doesn't use diskspace, only a tiny part of RAM, like sysfs/tmpfs/procfs.
Here is more info: http://library.gnome.org/devel/gio/stable/ch01.html
The two apps above use gnome libraries, which require gvfs for their filechooser so they can access all the mounted filesystems easier (easier for the app authors).
Last edited by fphillips (2010-01-24 08:14:23)

Similar Messages

  • My MacBook is asking for a password to install a program, but I didn't set one.

    My MacBook is asking for a password to install a program, but I didn't set one. I've just completely wiped my laptop due to corrupt files, which an Apple Genius in the store helped me with, and we didn't set a password. I'm now home and trying to download programs that I had on before, and it's asking for a password. I try to go to "change password" and it asks for the old before I can enter the new, but there is no old. What should I do?

    Hello chilondon,
    Thanks for using Apple Support Communities.
    The password your Mac is prompting you for is your administrator password for the computer.  If none of the attempts to enter it in worked, including leaving it blank, you can reset the password by following the directions in the link below.
    Reset the user password in OS X Lion, Mountain ... | Apple Support Communities
    Take care,
    Alex H.

  • I'm trying to locate my iPhone but I didn't set up find my iPhone how would I locate it?

    I'm trying to find my iPhone but I didn't set up find my iPhone how would I locate it

    Welcome to the Apple Community.
    You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

  • A passcode screen has appeared, but i didn't set one up

    the 'enter passcode' screen is blocking me from using my ipad. i didn't set it up, what happened and how can I disable it?

    i use gmail on my iphone and ipad, but neither device has ever locked me out like what just happened with my ipad. i was just trying to access my apple id to setup icloud on apple.com when i was having difficultywith my primary email. so i attempted to change my id to the gmail acct, and now this happened. i don't know if there is any connection, but it is strange that it happened afterwards. if i restore from itunes, will i lose my ipad data?

  • I got locked out from my iPad mini during setup, keep ask me for passcode but I didn't set one up.  Reboot unsuccessful, iTune won't let me connect because I didn't enter my passcode. How to fix this?

    I got locked out from my iPad mini during my initial setup.  Keep ask me for passcode but I haven't setup one.  Reboot and restart didn't solve the problem, tried connect to iTunes but it won't let me because it requires the passcode.  Tried my Exchanged password, Apple ID password and my iPhone passcode but none work.  Any idea to resolve this?

    Try and force your iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost.

  • When i want to download something it asks for a password but i didn't set one up?

    i have just got a imac and when i want to download something e.g. Flashplayer it asks me for a password but i didnt set one up and i dont know what it is. Also, i cant change the password as i dont know the old one and there isnt a forgot password option what should i do? xx

    Apple strongly recommends that each user have a password. If you never set one up, log into your account, and reset it. See http://support.apple.com/kb/HT1274 for details.

  • Trying to purchase an app, but i didn't set any security questions?

    Hi,
    So, i just got a new ipad and im trying to buy an app, but it keeps telling me to answer security questions, all fine except, i never set an answer to any seurity questions?!
    Any way to get around it?

    Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

  • Apple ID says my gmail account is already in use, but I didn't set it up?

    I haven't used my Apple ID since I last had an iPhone over 2 years ago. Yesterday when I ordered my iPhone 6 I decided I wanted to create a new Apple ID, because I no longer use the email that I used to use. (I understand I can't merge the two accounts).  However, I went to create my account and it said my email wasn't available. So I went out and just thought I would go and "reset" my password. However, I have yet to receive any email from Apple. My thinking is either the availability is incorrect or I just need the email to send.

    bsans10 wrote:
    I haven't used my Apple ID since I last had an iPhone over 2 years ago. Yesterday when I ordered my iPhone 6 I decided I wanted to create a new Apple ID, because I no longer use the email that I used to use.
    Simply update your old AppleID.
    -> Change your Apple ID

  • My ipad has locked. but i didn't set a passcode

    I have just set my ipad up on itunes. then after i turned it back on it asked for a passcode. i haven't set one up, so can't access my ipad. What do i need to do to get the passcode?
    Help!

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT3231 I've just got MacBook pro and now I can't get pass the password section.  We didn't set a password

    Help please, my MacBook pro is asking for a password but we didn't set one

    You need to set a password. So, do this:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
    Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.

  • Listing order and dates of my photos have all changed and now it is a mess in my photo library! I tried to list them again by date, but it didn't fix the problem. What to do?

    Listing order and dates of my photos have all changed and now it is a mess in my photo library! I tried to list them again by date, but it didn't fix the problem. What to do?

    If your preferences keep getting messed up try this:   make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    Happy Holidays

  • Hello Apple. Yesterday I have purchased app «OS X Mountain Lion», but it didn't download completely and disappeared from my purchased list. Need you assistance.

    Hello Apple.
    Yesterday I have purchased app «OS X Mountain Lion», but it didn't download completely and disappeared from my purchased list.
    Need you assistance.

    See if the purchase is hidden:
    http://support.apple.com/kb/HT4928

  • I want to inform you about my purchased list I tried to open it many times but invain. I tried to open the list at another device but it didn't open, So I tried another account on my device at it opened, So the Problem is not in my device I think in the a

    I want to inform you about my purchased list I tried to open it many times but invain. I tried to open the list at another device but it didn't open, So I tried another account on my device at it opened, So the Problem is not in my device I think in the account. I hope my problem will be solved soon.
    Thanks for interest.

    It sounds as though you are trying to talk to Apple.  Unfortunately, this is a user-to-user forum and Apple does not participate here.
    You say you tried opening it "but in vain" - describe what happens, do you get an error statement or is the list just empty.
    You tried another account, does that mean you set the Account ID to another one (for the itunes store?) and now you do get a list?  Is it the list of apps that you have purchesed?  If so, then recall that the device must be connecting to itunes using the ID that was used to purchase the apps.  If you later change to another ID, then all the apps purchased under the other ID will be removed.
    If I'm not understanding your problem, please describe it again and include more information.

  • Dmg mounts but doesn't open

    Hi everyone,
    kind of an odd problem I've started having today. DMG's mount fine but don't open in a window any more. For instance, if I wanted to install an app and it was a DMG file i would double click it, it would mount and I would see a window with the program listed. Now, I double click the DMG file and it mounts but no window. I have to go to the left bar on my finder window, locate the mounted image and install the app from there.
    Yes, that works ok but it's more of a pain then it used to be.
    Any ideas on what's going on? I can't think of anything that I've changed either.
    10.8.2 on a macmini.
    thanks

    That depends on how the disk image is created. Some won't open a window automatically when mounted.

  • I deleted all my playlist by mistake from itunes. tried copying the to on the go on ipod and thought it would copy it on to my itune but it didn't. does any one know how i can do this without redoing all my playlists. thanks

    I deleted all my playlist by mistake from itunes. tried copying them to on the go on ipod and thought it would copy it on to my itune but it didn't. does any one know how i can do this without redoing all my playlists. thanks

    Are the playlists still on the iPod? If so I can probably cook up a script to read them back into iTunes, or you can check the features of the various tools listed at the end of this user tip to see if you can find one that you want to use.
    tt2

Maybe you are looking for

  • TS2446 My apple Account has been locked due to wrong entry. What do I do to find my answers to the security questions ?

    I couldn't remember my security question password/ answers in the process I was locked out . How do i reset those passwords.

  • Control break statement

    In Control break statement, can i write the 5th column first?

  • ACR 5.4 question

    I noticed that LR2.4 is only showing ACR 4.4 - how do I install the newer version?  What might be occurring is that I'm still on the 30 day trial of LR since my actual copy has yet to be delivered (hopefully today or tomorrow).  Anyways I noticed tha

  • Converting 1.0 event model to 1.1

    I am working on converting a game that uses the 1.0 event-handling model to 1.1 (in preparation for eventual conversion to Swing). I have reached the point of saturation where I'm probably missing the obvious things that will fix my problem, so I'm h

  • Java Webdynpro

    Hi, I am developing java Webdynpro and whould like to know what do I need to run at a customer who does not have SAP. I would like to develep With java Webdynpro, and with webservices. Also what will the cost be for such a instalation