GW Interface Questions

We are looking for direction regarding communicating with Groupwise 7 for the purpose of generating 'Tasks', 'Alerts' and E-mail messages to individuals and groups. It has been suggested that communicating with the Groupwise Gateway API or SOAP would allow us to do this. Is there documentation in regards to how to communicate with these interfaces? If so, where would we be able to obtain them.
We are currently using GroupWise 7.01 on NetWare 6.5. The application or service we are looking to develop will most likely be run on the Linux platform.
Thank you in advance.
Robert

First ofall, there aRE developer forums accessible via nntp.
Second, "through a GW interface" has no meaning in any language or
universe. If you mean "can I create tasks programmatically?" Yes, via
SOAP, object api, or api gateway. I already commented on this.
I'll mention two other APIs
C3PO allows CLIENT-SIDE plugins (win32 only) (eg adding a menu to client
)...TokenAPI allows interactive use of Client (Win32 only) (eg popping
up the busy search interface)
now....see below
>>>
>>>
>
> Thank you for the quick response. Currently we have an admin who does
> this manually by placing tasks in each individual's task list as a
> reminder on appeal due dates. We assumed that if it could be done
> manually, we could automate this function.
Of course. All things can be automated. At worst, you reverse engineer
the code nad write your own. But that's not what you mean
Is there no way to do this
> through a GroupWise interface?... or should we be developing this
> outside of GroupWise?
>
Already commented. Your statement is poorly and unclearly worded, so I'm
ignoring it, after having added what I could.
> Just to clarify, here are our requirements:
> We need to be able to have a process that can create Tasks on
> employee's task lists to alert them to various milestones in the
> appeals process. For instance, 30, 15, and 5 days before letters are
> due, certain people should receive a task from the system to complete
> their work.
>
You can create a task programmatically. Of course the user has to accept
the tasks, otherwise they only show in the inbox, but that's eactly like
currently. SOAP and Object API
> -Any replies generated to these tasks need to go back to humans (a
> receipt notification of completion)
Well, that's nice. You can set the notification options for the task
before sending. SOAP and object api are again good options.
The FROM address is not settable. It is set as whoever you log in as.
Yes you log in as the sender. Either you supply the username, password
or you use the "Trusted Application API" to access all mailboxes as a
trusted user. The initial generation of the Trusted Key requires Win32,
thenceforth Object API or SOAP.
>
> -Some recipients of these automated messages will need to be a mailing
> list: we need to send alert messages to certain members or groups
>
Why do I care. Yes yes recipients. Groupwise supports recipients.
Recipients are good because email travels from one place to another. Of
course if these are internet users they just get the ical equiv of the
task, which isn't quite as good.
Seriously, whatever, programmatically this matters very little. I guess
I should be happy you were complete.
> -Different messages will be sent daily, potentially many messages
> (10-20) sent on a given day.
>
Yes, yes. Of course you'll have to write said program and it will some
how be configured as to this schedule. But that's easy.
BTW 10-20 isnt many. 20000-100000 is many. GW laughs at your feeble
10-20 messages (well assuming they aren't 1 million recips each).
>
>
> Thank you again.
You are welcome. Now, go to developer.novell.com/groupwise . Choose
Object API (if win32 is acceptable, it's a bit easier, more mature, and
faster), or SOAP (cross platform, becoming the flagship), download the
NDK, and write the durn thing. More questions? NNTP the support forums,
and you'll find the dev forums magically too.
>
> Robert
>
>

Similar Messages

WLS Users and Groups interface questions / observations

I'm new to WLS, having just installed OBIEE 11g for the first time. There are some oddities in WLS around setting up Users that I'd like to ask about, to see if I'm just missing something, or if the interface really IS this bad. Please feel free to comment in any way, or to correct any statements that are erroneous. Here goes:
1. The use of Previous and Next buttons instead of a vertical scroll bar for finding users and groups in their respective lists. What if you have several hundred users, and the one you want to modify starts with the letter 'Z'? That means clicking the Next button several dozen times. (Security Realms … myrealm … Users and Groups … Users) Not only is there no scroll bar, there's no search box either. The only way to get to a user near the end of the alphabetical listing is the Next button. Is that correct?
2. After adding a new user, what's the next most logical thing to want to do? How about assigning that user to Groups? So why do I have to click Next several times to find that new user in the alphabetical list? I don't see a sortable 'Date Modified' field for the table of users, nor a link to the "Most Recently Added" user. Nor can I assign groups during the same action as creating the user. In the example in #1, I might have to click Next several dozen times to get to the user I just added. Is that correct?
3. When creating a new User, immediately after clicking New, where is the most likely place that I'd want to go? How about the Name field? Right now, the cursor rests in some indeterminate location. I have to hit the Tab key 14 times, or move the mouse into the Name box and click it. The active cursor position does not default to the Name box when creating a new user. Is that correct?
4. I don't see a 'Create Like' button for creating Users, so that existing group membership can be easily replicated. I'd like to be able to add a new employee by clicking to highlight an existing user from the same department, clicking a 'Create Like' button, then entering a new user name and password, with all group memberships assigned automatically based on the source user. The same could be said for replicating groups. I don't think that exists. Is that correct?
5. I don't see a clean way to return to the User list on the page on which I clicked a user name. Imagine that I'm going through my entire list of users one at a time to set an attribute. I click on the user JSMITH and set the attribute. The only way to get back to JSMITH's page and select the next user list is to hit the browser's back button three times, or to click the Users and Groups breadcrumb at the top of the screen and use the Next link multiple times to find that page again. Is that correct?
6. I don't see a way to bring up a Group and assign Users to it from a list. It appears that the only way to assign a User to a Group is to access a User profile and click Groups. If we're creating a new group that has 200 users selected from a list of 500 users, that could potentially represent somewhere between 5000 and 10000 mouse clicks. It would be much more efficient to be able to bring up a group, then select its members from a list of users. That does not appear to be possible. Is that correct?
7. It also appears that when assigning groups for Users, the list of Available Parent Groups sorts the lowercase entries after all uppercase entries, so that groups that start with the letter 'a' fall after groups that start with 'Z'. That is not the case with the list of users. The User table uses a case-insensitive sort. Is that correct?
8. When I want to delete more than one User, and the ones that I want to delete are on different pages, there appears to be no way to select those users from multiple pages at the same time. So, imagine that I have 500 users, and I want to delete two users, one of whom is listed on page 48, and the other on page 50. I would have to click the Next button 47 times to find the first user and delete it. At that point, the interface returns to page 1, and I have to click the Next button 49 times to reach the second user. Is that correct?

Hi,
Regarding your first question, you might want to press the "Customize this table" button, then select the maximum allowed amount of rows in "Number of rows displayed per page:" that would resolve some of the problems you're having with the interface. I do think this is not a great graphical tool, and there are some usability issues.
Regarding the adding of users to groups, it seems the way you describe is the only way of doing it, however you could try using a script instead of the graphical console, the easiest way of making it is adding a user to a group while using the "Record" button on the top of the screen to get a wlst script to use as a model, then create a new script with all new users you want to add/modify.
Regards,
Franco.

HR-PDC , Time Management Interface Question

Hi,
I am involved in a project that links Kronos Time Management system with SAP 4.6C . Since Kronos is certified for standard interface HR-PDC, we can use it for integration without patch-work.
For more information, go to <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/sdnservices/icc">this link</a> and on the right hand side, select Human Resources from Integration Scenarios -> Business Application Integration. Select HR-PDC from the list of interfaces available for HR.
There are a few concerns though, the most important being related to transfer of HR mini-master data. It is mentioned in the interface documentation that SAP always sends complete master data for all employees and that deltas are not supported.
Now, the customer has around 50,000 employees and sending data for each one of them every night doesn't seem to be a workable solution, especially when only 30-50 records change in a day. I understand that sending deltas can be accomplished through some tweaking, I am wondering why the standard interface won't support them, knowing the fact that all historical (delta) information is available from cluster PCL4.
Although I understand that SAP themselves are in a better position to answer the question of why the interface is like that, I am asking if anyone experienced any short-comings with sending delta information. For example, perhaps the number of scenarios for which delta was to be transferred were too many and sending complete information was more suitable. So if anyone has had previous experience of working on HR-PDC, please shed some light on their experience.
Secondly, is there a standard interface to record and send changes in Organization and Staffing (create, modifiy, delete) to a sub-system? I am talking in relation to t. code PPOME. Is HR-OCI the right interface for that???
Thanks and regards
Message was edited by: Shehryar Khan

Hi,
Thanks for the reply. It was quite helpful.
It is fine to download time balances but downloading whole employee (mini)master data each day is a bit difficult to explain to stakeholders. Perhaps I may need to create my own driver program that populates data for modified employees only. Thoughts??? Is this the correct approach???
As far as the second one is concerned, I am interested in downloading new/modified OM records like departments, jobs, positions, etc. It seems the same can be catered for by using HR-PDC through business object RCVPEVTREC, method receivePObject. I perhaps overlooked the interface specs.
Thanks again and I may get back with more questions.
Regards

User Interface Questions

I have already programmed some dialogs in JavaScript. I'm not using Script UI, although I've played around with Script UI a little bit. Now I'm getting a bit more advanced with some user interfaces and dialogs and have a few questions:
1. Is it possible to create a "live updating" dialog similar to InDesign's Files > New > Document, where based on a menu selection of a preset, the dialog's editboxes change their values to reflect that menu selection?
2. Can you program something like the Presets button in InDesign's New Document dialog where the user clicks "Save Preset", names it, and then the main dialog updates with the new preset the user just created.
3. Script UI does not have measurement friendly boxes, does it? By that I mean that when you enter inches, mm or picas, the box will translate it into the current measurement type.
4. I love the nudge option on the measurement editboxes. Can that be done via Script UI?
Ideally my coding needs to work in both CS2 and CS3 and I code in JavaScript because that's what I know, but if the "live updating" stuff is possible in AppleScript or VBScript I'd still like to be aware that it can be done.
While code examples of any of this are welcome, I mostly need to know what's possible, and any starting point you can offer will help (like the name of the control). That way I can start looking things up and figuring them out.
Thanks in advance,
Dan

Thanks for the answers Bob. They are exactly as I thought, but wanted to make sure. It sucks that we have to recreate (via code), things that were given to us before Script UI. I know Script UI is more powerful in some ways (and hopefully sure will get more powerful with time) but loosing measurement boxes is a big bummer. They had so many nice built in features. I feel like I need to reinvent the wheel with Script UI.
1. Do you have any example dialogs that you could post? I can often figure out how to get a lot of stuff done by looking over examples other people have created. Especially things where one feature interacts with another, but even just a dialog with menus, text, etc so I can check out how to layout the dialog. I have created one dialog with Script UI, but am not sure if I am doing it very efficiently and I couldn't find any Script UI stuff in InDesign's sample scripts.
2. I suspect if I use Script UI I'll have to verify that only numbers are entered into the edit fields right? I need numerical values only for what I will be doing. Any thoughts on the best way to verify it's only a number in there? Can I do that live in the dialog before the user clicks OK? Argh, all these complications make me less than enthusiastic to go to Script UI, but I really would like to be able to have a live updating dialog.

Flexconnect Radius Server Overwrite interface Question

Hello All,
Can someone confirm/comment on the following:
In a flexconnect scenario, for site 1, i would like to source the radius requests to a remote radius (at the flexconnect site 1). as i can understand i need to enable the RAdius Server Overwrite interface option. Is that all?
Also, for flexconnect sites X this can also be done per WLAN X configuration.
Is this correct?
Thanks

Hi pana,
Answers below :
Meaning that, even if i configure the Flexconnect groups with local authentication, then how does the Flexconnect ap reach the local radius?
When you are working with local authentication, the AP will communicate with the local RADIUS Server using the local routing in the branch office without the 802.1X traffic being sending to the WLC......the AP will communicate directly to the local radius server using it IP address and the local routing. (This communication is transparent if you see from the WLC because the WLC will not intermediate the authentication between the client and RADIUS, who will intermediate is the AP. The WLC will receive informations when the AP is in connected mode about the client and the authentication method and etc after the user was authenticated).
Example :
RADIUS SERVER
WLC ----SWITCH L3------ROUTER----(MPLS Link)-----ROUTER---SWITCH L3---AP
The WLC continues managing the Access Point but will not"talk" to the RADIUS Server, who will "talk" to the RADIUS Server is the AP in the branch office using the SWITCH L3 (Asumming that you have the RADIUS in one network and the AP in another network in the same branch office)
Understand now ?
As i can understand, in a local switching/local authentication scenario the Flexconnect ap can only map a WLAN to local VLAN( route-able network on the remote site) that serves for the users-data plane. Then in conjunction with the radius server override option, how can this FlexconnectAP send requests to the local radius? I can only suppose that it will do so using the users locally mapped VLAN/WLAN but i cant reference this anywhere.
The AP will only send the requests do the local radius only if you configure the FlexConnect Local Auth and FlexConnect Group. Enabling this option the AP will use it IP Address to communicate with RADIUS without the WLC intermedianting this communication.
Without the FlexConnect Local Auth enable in the WLAN the AP will continue directing the 802.1X requests to the WLC and the WLC will send to the RADIUS Server and in this situation if you enabled the radius overwrite interface the WLC will try to reach the RADIUS Server using the WLAN interface and not the management the interface. (You do not need the radius overwrite interface option to work with Local Auth if you want to use the AP as a Authenticatior, you only use this interface if you want that the WLC with central authentication direct the 802.1X authentications to the RADIUS)
One information about the VLAN/WLAN is really mapped statically but you can manipulate it using the RADIUS Atrributes, changing the VLANs from the USERs based in the AD Group and after the authentication. It can work in local auth scenario or central auth scenario.
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/emob73dg/emob73/ch7_HREA.html#pgfId-1103070
I hope it helps and if not helps i think i am not understanding the real question.

Interfaces questions

I'm working through the tutorial and have a question about casting and interfaces.
In the sample code in the tutorial, they cast other as RecanglePlus. This only makes partial sense to me. Given that the getArea() method would only work on basic rectangular/square shapes to begin with, do I still need to cast the 'other' object as a Rectangle? Presumably it would crash if I sent a circle object whether I cast the object or not.
Thank you in advance for any clarification to this.
public class RectanglePlus implements Relatable {
    // a method for computing the area of the rectangle
    public int getArea() {
     return width * height;
    // a method to implement Relatable
    public int isLargerThan(Relatable other) {
         RectanglePlus otherRect = (RectanglePlus)other;
         if (this.getArea() < otherRect.getArea())
              return -1;
         else if (this.getArea() > otherRect.getArea())
              return 1;
         else
              return 0;
{code}

robert_t wrote:
I'm working through the tutorial and have a question about casting and interfaces.
In the sample code in the tutorial, they cast other as RecanglePlus. This only makes partial sense to me. Given that the getArea() method would only work on basic rectangular/square shapes to begin with, do I still need to cast the 'other' object as a Rectangle? Presumably it would crash if I sent a circle object whether I cast the object or not.Yes, you would get a ClassCastException if you called that method with anything but a RectanglePlus. If the definition of an interface method depends on methods that aren't part of that interface, then chances are either both or none of those methods should be in the interface. If Area is something that a Relatable is defined to implement, then that getArea method should be part of Relatable. If not, then the interface isn't very useful.
If you had another class Circle that implements Relatable, but doesn't have a getArea method, how would you ever use that common method to compare the two different types? You couldn't. If you make getArea an interface member, then any implementation of Relatable can return it's area, and you can leave the types as Relatable without casting to concrete types.

Necessary to Power off each night?--Logic/Interface Question

Hey all....i recently purchased the M-Audio Solo Firewire and am wondering if it is necessary to "unplug"(firewire)it from the mac each night...reason why i ask is because of the VERY bright blue power light that it emits in my room...I let the mac 'sleep' everynight, but the power light stays lit...if so, how should i unplug it each night? and/or how long is it ok to keep it 'powered up'? thanks for any and all help....
b

If your drives dont turn off, I have a question. Are you using a UPS (Uninteruptable Power Supply)? If not, you really should consider it. The UPS is kind of a battery that takes in the fluctuating AC power and stores it and puts out a steady stream of constant rated power. Furthermore, and what they are designed for, is in the event of a power outage, they keep putting out steady power for about 20 minutes. Long enough to save your work and shut down safely. I have a nice one that I plug in my computer, my Audio and MIDI interface, and my external Hard Drives. And it has saved me more than once. When I shut down at night, the last thing I do is turn off the UPS which in affect, turns off my FireWire drives as well.

Another audio interface question

hi all, esp. hangtime
im looking at the firepod and firestudio interfaces on the presonus site to replace my mackie 1202-vlz pro. theres only 2 things im hoping to change. one thing is having a mixer rack mounted so its more stable for transporting to gigs and the other is being able to multitrack record into my computer. one question arises i cant see on the site. do the interfaces support stand alone operation? what i mean is right now i can adjust each tracks volume and eq with knobs live without dragging my computer to a gig. could i still do that if i replace the mackie with one of those?
thanks for any help.

Hah, I just bought a Presonus Firestudio last week! And yes, it can do stand alone operation. It stores the last setting you made (you make new settings with the presonus application) onto its flash memory. You can even adjust the volume with the knobs.

Printable interface question

Hi all,
Just a quick question, I'm attempting to print the contents of a Container, however from what I can tell, the Container has to have been painted to the screen first. If I don't paint the Container to the screen in some way (eg in a JFrame) first, it just prints out a blank page.
Is there any way to print a container without displaying it to the screen first?
Regards,
Andrew.

Hi!
There is no need to display your component before printing can begin. In fact, one printJob can print several components at once, or you can add arbitary contents to the page (such as text or images or whatever)!
Here is an example:
//To start the printjob, somwhere outside the component to be printed
public void startPrintJob() {
     Component sc = myComponentToPrint;
     try {
         PrinterJob printJob = PrinterJob.getPrinterJob();
         PageFormat pf = printJob.defaultPage();
         pf.setOrientation(PageFormat.LANDSCAPE);
         printJob.setPrintable(sc,pf);
         if (printJob.printDialog()) {
                printJob.print();
     } catch (PrinterException ex) {
         JOptionPane.showMessageDialog(this,
                           ex.getMessage(),
                           "Printing error",
                           JOptionPane.ERROR_MESSAGE);
/* This function should be within the component you want to print.
* My version does some scaling to fit the page.
* Note that this function is a member of the Printable interface,
* which this component has to implement.
* pi refers to the current page to be printed.
* In this example there is only one page, so I return NO_SUCH_PAGE
* if pi >= 1.
    public int print(Graphics g, PageFormat pf, int pi)
                          throws PrinterException {
     if (pi >= 1) {
         return Printable.NO_SUCH_PAGE;
        //Fit to page
     Graphics2D g2d = (Graphics2D)g;
     g2d.translate(pf.getImageableX(), pf.getImageableY());
     double scaleX = pf.getImageableWidth() / ((double) getWidth());
     double scaleY = pf.getImageableHeight()/ ((double) getHeight());
     g2d.scale(scaleX, scaleY);
     RepaintManager currentManager =
         RepaintManager.currentManager(this);
     currentManager.setDoubleBufferingEnabled(false);
     //Add a date to the bottom of the page
     Font f = new Font("Arial", Font.PLAIN, getWidth()/100);
     FontRenderContext frc = g2d.getFontRenderContext();
     TextLayout tl = new TextLayout("Created on " + new Date(),
                           f,frc);
     tl.draw(g2d,0,getHeight()-tl.getDescent());
     //Draw contents by calling paintComponent manually, no need to draw on screen!
     paintComponent(g2d);
     currentManager.setDoubleBufferingEnabled(true);
     return Printable.PAGE_EXISTS;
    }

Implementing interfaces question

I have a really vague question about interfaces....can't really figure out how this works...I know that interfaces only have method definitions and the implementing classes should define those methods.
I am trying to use a DOM parser to parse an XML document. The org.w3c.dom package gives you a list of interfaces like Node, NodeList, Document etc to work on.
Assume that i have the following code in my class:
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
Document doc = builder.parse(invoiceXML);
NodeList itemList = doc.GetElementsByTagName("item");
Here is what I dont understand...doc is of type Document which is an interface. How can you call the method of an interface directly in the 4th line? I thought we are only supposed to call methods on the implementing class...the problem is I dont see an implementing class here...does the builder.parse(invoiceXML) return a Document interface or an object that implements the Document interface? If 'doc' is actually an object that implements the Document interface then it makes sense here...but then will all the methods be automatically implemented in the object created by the api?

Here is what I dont understand...doc is of type Document which is an interface. Yes.
How can you call the method of an interface directly in the 4th line? How? Just like that.
I thought we are only supposed to call methods on the implementing class...Methods are applied to objects, not classes.
the problem is I dont see an implementing class here...And you don't need to. Do you need to open up your DVD player and look inside in order to push "play"?
does the builder.parse(invoiceXML) return a Document interface or an object that implements the Document interface? Methods don't return interfaces. They return references to objects (or primitive values).
If 'doc' is actually an object that implements the Document interface then it makes sense here...Eureka!
but then will all the methods be automatically implemented in the object created by the api?"Automatically" is not how to think about it. The Document interface was implemented by some class, the details of which aren't important. What's important is that if you have a reference to an object of type Document, you can apply Document methods to it, according to the API for Document.

Cisco SG 300-10 VLAN and IP Interface Question

Hello,
Please forgive me if you find my question too basic. But, I would really appreciate an answer as I am having a heck of a time getting the VLANs to work. I have several VLANs configured as follows, but, my question is related only two VLANS: VLAN 104 and VLAN 2000. Followings are the screenshots. I have connected cable from Port 6 of the switch to the NIC2 of Windows 8.1 PC. When I use GE6 as access port for VLAN 104, I am able to ping to the NIC2 configured with static IP 10.10.30.30. However, when use GE as Trunk Port for VLAN 104 and 2000, I am not able to ping the NIC2 configured with static IP 10.10.30.30 or static IP 10.10.110.30. I am using the ping utility from the GUI.
If there is a better way to test the trunk port, please let me know.
At this point, I am assuming that something is wrong with my configuration as the NIC2 is unable to receive IP address.
The other assumption is that NICs with Windows 8.1 OS does not accept Traffic from Tagged VLANS.
VLAN TableShowing 1-11 of 1110203050per page
VLAN ID
VLAN Name
Originators
VLAN Interface State
Link Status
SNMP Traps
1
Default
Enabled
Enabled
100
Management A
Static
Disabled
Enabled
101
Management B
Static
Disabled
Enabled
102
VXLAN A
Static
Disabled
Enabled
103
VXLAN B
Static
Disabled
Enabled
104
vMotion
Static
Enabled
Enabled
105
IP Storage
Static
Disabled
Enabled
106
HQ Uplink
Static
Disabled
Enabled
107
HQ Access
Static
Disabled
Enabled
1000
Test VLAN
Static
Disabled
Enabled
2000
Test2 VLAN
Static
Enabled
Enabled
Port VLAN Membership Table
Filter:
Interface Type
equals to
PortLAG
Go
Interface
Mode
Administrative VLANs
Operational VLANs
LAG
GE1
Trunk
1UP
1UP
GE2
Trunk
1UP
1UP
GE3
Trunk
1UP
1UP
GE4
Trunk
1UP
1UP
GE5
Trunk
1UP
1UP
GE6
Trunk
1UP, 104T, 2000T
1UP, 104T, 2000T
GE7
Trunk
1T, 100UP, 101T, 102T, 103T, 104T, 105T, 106T, 107T
1T, 100UP, 101T, 102T, 103T, 104T, 105T, 106T, 107T
GE8
Trunk
1T, 100UP, 101T, 102T, 103T, 104T, 105T, 106T, 107T
1T, 100UP, 101T, 102T, 103T, 104T, 105T, 106T, 107T
GE9
Trunk
1T, 100UP, 101T, 102T, 103T, 104T, 105T, 106T, 107T
1T, 100UP, 101T, 102T, 103T, 104T, 105T, 106T, 107T
GE10
Trunk
1T, 100UP, 101T, 102T, 103T, 104T, 105T, 106T, 107T
1T, 100UP, 101T, 102T, 103T, 104T, 105T, 106T, 107T
IPv4 Interface TableShowing 1-11 of 1110203050per page
Interface
IP Address Type
IP Address
Mask
Status
VLAN 105
Static
10.10.20.1
255.255.255.0
Valid
VLAN 104
Static
10.10.30.1
255.255.255.0
Valid
VLAN 2000
Static
10.10.110.1
255.255.255.0
Valid
VLAN 1
Static
192.168.0.39
255.255.255.0
Valid
VLAN 1000
Static
192.168.1.1
255.255.255.0
Valid
VLAN 106
Static
192.168.100.1
255.255.255.0
Valid
VLAN 100
Static
192.168.110.1
255.255.255.0
Valid
VLAN 107
Static
192.168.130.1
255.255.255.0
Valid
VLAN 102
Static
192.168.150.1
255.255.255.0
Valid
VLAN 101
Static
192.168.210.1
255.255.255.0
Valid
VLAN 103
Static
192.168.250.1
255.255.255.0
Valid
Ping
Host Definition:
By IP address
By name
IP Version:
Version 6
Version 4
<tr id="trSourceIP" display:none"="">
Source IP:
Auto10.10.20.1(VLAN105)10.10.30.1(VLAN104)10.10.110.1(VLAN2000)192.168.0.39(VLAN1)192.168.1.1(VLAN1000)192.168.100.1(VLAN106)192.168.110.1(VLAN100)192.168.130.1(VLAN107)192.168.150.1(VLAN102)192.168.210.1(VLAN101)192.168.250.1(VLAN103)Autofe80::5267:aeff:fe3d:83b3(VLAN1)Auto10.10.20.1(VLAN105)10.10.30.1(VLAN104)10.10.110.1(VLAN2000)192.168.0.39(VLAN1)192.168.1.1(VLAN1000)192.168.100.1(VLAN106)192.168.110.1(VLAN100)192.168.130.1(VLAN107)192.168.150.1(VLAN102)192.168.210.1(VLAN101)192.168.250.1(VLAN103)fe80::5267:aeff:fe3d:83b3(VLAN1)
Destination IPv6 Address Type:
Link Local
Global
Link Local Interface:
VLAN 1
Destination IP Address/Name:
Ping Interval:
Use Default
User Defined
ms (Range: 0 - 65535, Default: 2000)
Number of Pings:
Use Default
User Defined
(Range: 1 - 65535, Default: 4)
Status:

Tom and Michal, your response is much appreciated. You are 100% right. The issue was with the Windows recognizing the VLAN tags. I have tested trunking by using the vmxnet3 driver from VMware and it works.
I had another question where I can use your help too. I am not sure how to connect two Cisco SG300 switches - one with L3 mode and the second one with L2 mode. I have configured GVRP for Port 5 of both switches and run a cable connecting to Port 5 of each switch. I have made port 5 of both switches trunk mode ( 1U, 1000T). I have created VLAN 1000 on both switches. With L3 switch, I have added IP Interface (192.168.100.1) to VLAN 1000. My issues is that, I am not able to access the management port (192.168.1.238) of the L2 switch. Note that the L2 switch has only on uplink, which is to the L3 switch. Since the Port 5 also receives untagged traffic from VLAN1 (192.168.1.1), I am assuming that it would receive the management network from VLAN1.

MSI GT70 2PE 880m Bus Interface Question

I recently purchased an MSI GT70 2PE with an nvidia 880m gpu
The question i have is should the card be running with a bus interface of x4 at all times?
gpu load when other screenshot was taken:
The above is a screenshot of gpu-z while running its render test
the bus interface always reads x4 3.0 even with games such as planetside 2 running at max settings
I am on the latest nvidia driver and did install the vbios update from msi
From other forums ive gathered it should be running at x8 when idle but should be reaching x16 when running games or stressing the card?
If so is there any way to get it to work correctly?
Edit:
The only other state i have seen it in is this:
which is x4 1.1

Quote from: zipper.sippola on 05-August-14, 02:13:36
Probably GPU-Z isn't up-to-date with 880M; my 680M is recognized as x16.
This is probably it. Even though the 880m is a refresh of 780m and has been out a while. There are still plenty of programs and utilities that don't even identify it or know what it is. I'm sure things will get better.
If you really need/want to know if it is 4x or 16x lanes, then run a game on it with clear documentation of settings for that chip and results on a non multiplayer game. If your laptop isn't running all 16 lanes, then it should run far slower than the rest.

Show policy-map interface | Question about QOS show command output

I hope this is the correct place for this question. If not, please let me know.
When I issue the show policy-map interface command (in this case on a 3845) there is some output I don't understand. I have included some output below and formatted the lines I am confused about as "computer code" which show up as red on my screen. A list of the individual lines i'm confused about is below, followed by those liens in the context of the show policy-map command's output.
Any help with this will be greatly appreciated. Thanks in advance.
5 minute offered rate 46000 bps, drop rate 0 bps
5 minute rate 10000 bps
bandwidth remaining 50% (768 kbps)
show policy-map interface
--- previous output omitted ---
GigabitEthernet0/0
Service-policy input: QoS_IN
class-map: Silver (match-any)
      164691299 packets, 23570752398 bytes
      5 minute offered rate 46000 bps, drop rate 0 bps
      Match: access-group name MAINFRAME
        4371992 packets, 2311242335 bytes
        5 minute rate 0 bps
      Match: access-group name KRONOS
        13334297 packets, 3051409140 bytes
        5 minute rate 5000 bps
      Match: access-group name EMAIL
        97652823 packets, 10323856470 bytes
        5 minute rate 10000 bps
      Match: access-group name VOIP-CONTROL
        20782858 packets, 1481676784 bytes
        5 minute rate 0 bps
      Match: access-group name LOGIXWEB
        0 packets, 0 bytes
        5 minute rate 0 bps
      Match: access-group name GRINDLOG
        0 packets, 0 bytes
        5 minute rate 0 bps
      Match: access-group name CITRIX
        46895 packets, 14669179 bytes
        5 minute rate 0 bps
      Match: access-group name CORP_WEB
        28502414 packets, 6387897396 bytes
        5 minute rate 4000 bps
      QoS Set
        dscp af31
          Packets marked 164691269
show policy-map interface s0/0/0:0
Serial0/0/0:0
Service-policy output: QoS_OUT
--- previous output omitted ---
    Class-map: Silver (match-any)
      86590227 packets, 12051546524 bytes
      5 minute offered rate 3000 bps, drop rate 0 bps
      Match: access-group name MAINFRAME
        7641084 packets, 2701232492 bytes
        5 minute rate 0 bps
      Match: access-group name KRONOS
        6975052 packets, 1555404656 bytes
        5 minute rate 0 bps
      Match: access-group name EMAIL
        58438150 packets, 5433636586 bytes
        5 minute rate 3000 bps
      Match: access-group name VOIP-CONTROL
        355083 packets, 41252455 bytes
        5 minute rate 0 bps
      Match: access-group name LOGIXWEB
        0 packets, 0 bytes
        5 minute rate 0 bps
      Match: access-group name GRINDLOG
        0 packets, 0 bytes
        5 minute rate 0 bps
      Match: access-group name CITRIX
        19 packets, 4967 bytes
        5 minute rate 0 bps
      Match: access-group name CORP_WEB
        13180836 packets, 2320015236 bytes
        5 minute rate 0 bps
      Queueing
      queue limit 64 packets
      (queue depth/total drops/no-buffer drops) 0/18156/0
      (pkts output/bytes output) 86421413/12004278837
      bandwidth remaining 50% (768 kbps)

this is my configuration
DGMGRL> show configuration
Configuration
Name: matrix
Enabled: YES
Protection Mode: MaxPerformance
Databases:
stdby1 - Primary database
stdby2 - Physical standby database
stdby3 - Physical standby database
Fast-Start Failover: DISABLED
Current status for "matrix":
SUCCESS
--- this is my first successful switchover -----
DGMGRL> switchover to stdby2
Performing switchover NOW, please wait...
New primary database "stdby2" is opening...
Operation requires shutdown of instance "stdby1" on database "stdby1"
Shutting down instance "stdby1"...
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
Operation requires startup of instance "stdby1" on database "stdby1"
Starting instance "stdby1"...
ORACLE instance started.
Database mounted.
Switchover succeeded, new primary is "stdby2"
-------------------this is my second switchover -------------
DGMGRL> switchover to stdby1
Performing switchover NOW, please wait...
New primary database "stdby1" is opening...
Operation requires shutdown of instance "stdby2" on database "stdby2"
Shutting down instance "stdby2"...
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
Operation requires startup of instance "stdby2" on database "stdby2"
Starting instance "stdby2"...
Unable to connect to database
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Failed.
You are no longer connected to ORACLE
Please connect again.
Unable to start instance "stdby2"
You must start instance "stdby2" manually
Switchover succeeded, new primary is "stdby1"
DGMGRL>
Edited by: user6981287 on Jan 7, 2010 12:57 AM
Edited by: user6981287 on Jan 7, 2010 1:00 AM

Supplier sites open interface question

Hi all,
Here is what we have done:
We have a data migration program that looks at a csv file and then brings the data into staging table.
Then, it inserts the above data into 3 open interface tables (AP_SUPPLIERS_INT, AP_SUPPLIER_SITES_INT, AP_SUP_SITE_CONTACT_INT)
We are using the vendor_interface_id to link the data.
For ex.
Supplier 'ABC' in AP_SUPPLIERS_INT would have vendor_interface_id => 2345
Supplier Sites that belong to above supplier will have:
vendor_interface_id => 2345 vendor_site_code => 'ABC-SITE-1'
vendor_interface_id => 2345 vendor_site_code => 'ABC-SITE-2'
When we ran the Request Set [Supplier Open Interface Request Set(1)] , the program considered all the records and imported Supplier record and 'ABC-SITE-1'.
It rejected 'ABC-SITE-2' because of a setup issue.
Now, after we fixed the setup issue, we ran the request set again, it rejected the Supplier record saying "Vendor already exists " => No problems with this.
But, it doesn't attempt to pick the second site 'ABC-SITE-2' which is now good to be picked, because it doesn't update the vendor_id, it stays as an orphan record.
Is there any way to work this around (preferably from the application)?
Thanks
Vinod

Hi user567944 ,
While submitting to the Open interface. the import options parameter should be All or Rejected. Please check this.
Regards/Prasanth

Setting project default file locations and a few random interface questions

I apologize for the randomness of this post, but it seemed better than spamming a bunch of different posts in a short period of time. I've been using Premiere Elements 9 for about 6 months now and there are a few little things that I'd like to tweak.
I'd like to change the default file save location for a project. I've got different projects in different folders and it seems like I should be able to set a default save location for each project. All I've ever been able to find in the help is how to set the scratch folder, which is different.
I'd like to change the default encoding preset for a project. For example, I have a custom preset for mp4 under the mobile phone category. It would be nice to have that be the default whenever I pick the mobile phone category.
With birthdays and concerts and plays and all that stuff I have about 50 videos and a couple hundred large photos already. Every time Premiere loads, it takes a few extra seconds to load up all of the thumbnails. I hide all the videos and pictures on the Organize tab and save the project, but it never sticks. Is this just impossible?
Finally, every so often, the end-of-clip marker acts funny. I don't know what the proper name for it is, but it is the thing under the mouse cursor in the picture below. It used to automatically move on the time line as I added or deleted clips. Somehow I clicked a button and it no longer does that. After a week or so of not working, it goes back to automatically adjusting as I add and delete clips from the timeline and then it will break again. Ideas?
Also in the timeline, I now have this huge gap of nothingness on top of video 1, see picture. My ocd says that Video1 and Audio 1 should be at the very top and the gap should be on the bottom. Ideas?
Thanks,
Bob

I kind of wish you'd have spread these questions out over a couple of posts so that we could answer each thoroughly. If I answer all of them in depth in a single post, this answer would be the size of one of my books! (which, by the way, contain many of the answers to these questions.)
1. The default save location for your videos should be the last place you've saved your video to. So that should happen automatically. Although in my books I recommend that, whenever you start a new project, you create a new folder for it. This is good housekeeping and a good way to keep your tmp and render files in the same place on your drive, which has a number of advantages.
2. You can't create a custom project preset. The only presets available are the ones Adobe provides. And, although they are pretty extensive, some non-traditional formats (like video from some mobile phones) are not well supported. You may be able to get it to work -- but it's usually a hybrid solution and, personally, if you plan to use your phone's video as your main video source, I'd recommend you look at another video editing program. Premiere Elements doesn't do the hybrid stuff well. It's ideally suited for video from traditional camcorders.
3. The thumbnails you see when the program loads are not in your current project. At least not until you import them into your Project panel. That Media panel is merely a preview to what's in your Organizer catalog. As I explain in my book, it's usually best to ignore this panel until you really learn your way around the basics of this program. It's very confusing. Fortunately, it adds very little load time to the program itself -- regardless of how much time it seems to add.
4. The thing in the illustration is the Work Area Bar. It's used to isolate a segment of your timeline for rendering, etc. Usually, it will shrink and grow as you add and remove video from your timeline. Unfortunately, there's a bug in version 9 and, if you manually change it once during a project, you'll have to manually change it for the rest of the time you work on the project. But, if you drag each end of the Work Area Bar to cover your entire timeline of videos, your project shouldn't misbehave.
5. The "gap of nothingness" on your timeline is just room for you to add more audio and video tracks if you'd like to. It's a good thing to have! BTW, as I'm sure you know (and my books, once again, explain) you can toggle the tracks on your timeline so that they display as either compressed (as in your illustration) or wide open, which allows you to see your clips and control audio and video levels. Once again, this is a very good thing!
Happy moviemaking.

GW Interface Questions

Similar Messages

Maybe you are looking for