H264 live encoding in Flash Player 11 slowly?

Hi,
I am using the new Flash Player 11 ability to encode H264 video within the Flash Player. I am streaming the webcam via RTMP to a FMS. I am using the following settings:
H.264 Baseline
Level 5.1
Keyframe freq. 5 seconds
25 FPS
Input size: 1280 x 720 (720p)
Output size: 1280 x 720 (720p)
Bit Rate: 1000Kbps
When I am using these settings with FMLE 3.2, the final stream plays very fluent with a good amount of FPS. If I am using Flash Player 11 for the encoding job instead, the final video is not as fluent as before and achieves less FPS (maybe 5 FPS).
So the question is: is Flash Player 11 not as good as FMLE 3.2 or am I missing some configuration? FP11 should be capable of encoding and streaming a fluent 720p stream, shouldn't it?
Thanks a alot.
Best
Malte

Addition: I've found out that the incoming bandwith is very constant when streaming and encoding from FMLE. It stays relatively constant around 1500 kbps:
When I am using the Flash Player 11 for encoding and streaming the incoming bandwith looks like the rocky mountains. The incoming bandwith jumps between 1000 and 6000 kbps during the whole stream:
That is definitely the reason why it "stutters" when using Flash Player 11. But I have no idea what I am doing wrong.
I am using these encoding settings for FP11 ...
var videoStreamSettings : H264VideoStreamSettings = new H264VideoStreamSettings();
videoStreamSettings.setKeyFrameInterval(5);
videoStreamSettings.setMode(1280,720, 25);
videoStreamSettings.setProfileLevel(H264Profile.BASELINE, H264Level.LEVEL_5_1);
videoStreamSettings.setQuality(1000000, 0);
... and these settings for the camera:
var camera : Camera = Camera.getCamera(0);
camera.setQuality(1000000, 0);
camera.setKeyFrameInterval(5);
camera.setMode(1280, 720, 25);
Any idea why the bandwith is not constant in FP11? The function camera.setQuality() should do the job, right (http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/Camera.html #setQuality%28%29)?
Thanks
Malte

Similar Messages

  • Adobe Flash Player running slowly

    On both Safari 4.0.3 and Firefox 3.0.13, I am getting regular messages saying: A script in this movie is causing Adobe Flash Player 10 to run slowly. If it continues to run, your computer may become unresponsive".
    Do I need to uninstall and reinstall Flash Player, or is am I missing something?

    I've seen this before and attribute it to bad scripting of the Flash in the web page. (I guess)...

  • Multicast media rtmp publish must use Flash Media Live Encoder? Flash 11.4, I use a worse problem

    I use the example FMS installation files, Flash Media Live Encoder is very well, but when I released the source replaced with flash 11.4 a worse problem.
    Beginning everything is normal and Flash Media Live Encoder does not make any difference, but when I upload bandwidth limit to 2KB / S (This situation often occurs in the actual situation, such as the user suddenly side live side of upload files), video and audio becomes very blocked, this is not the key to the problem is to when I upload bandwidth settings for normal, blocking situation will be no better, and have been very bad, but Flash Media Live Encoder automatically adjusted to normal, flash 11.4 but not.
    I have to use flash 11.4, nobody will go to install Flash Media Live Encoder.
    Mike Do you test only test Flash Media Live Encoder, but did not test flash, or flash need another set of code, but I really can not find a reason.
    Please help me, God。
    https://bugbase.adobe.com/index.cfm?event=bug&id=3363878

    There are ways to?

  • Safari will freezes on live cam, adobe flash player?

    I got my macbook replaced with the latest Macbook Pro 13"
    From then on, when trying to load a site http://www.321lively.com/general-chat.php with a other users and a camera, when you click the button, safari will freezes and the only thing you can do is right click and this shows,
    "Movie Not Loaded"
    "Adobe Flash Player .""""""""""""." And so on.
    My old Macbook worked find with this.
    I reinstalled adobe flash player, I fixed permissions, I downloaded firefox, this all didn't work, then I downloaded Google chrome and that worked for about 2 days then the same problem is persisting.
    Running
    Safari 5.1
    OSX 10.7.1
    Please help me.

    Macs now do not ship with Adobe Flash installed. Did you buy your Mac with Lion or is your Mac the previous generation?  You have to do the installation yourself.  Click Get Adobe flash player.

  • Flash player drops frames with playing live h264 frames

    Hi
    i have been tryin to get to a adobe representative for a long time now regarding this but unfortunately no one responds fast enough. I am facing a terrible issue. When broadcasting h264 live video from a flash based encoder client i notice severe frame drops on the playback end no matter what player i use. It even happens if i use fms development server on my own system. Video becomes smooth if i add a 1 sec buffer to the player. but then the video is no longer live.
    So my question is , is theer somethign wrong with h264 encoding in flash player or thats the way it is suppose to be ? at zero buffer  frame drops are severe.  Sample config :
    320 x 240 @ 24 fps @ 90000 bps @ 100 KFI @ 3.1 level @ baseline profile.
    I sincerely some one at adobe to respond. There are many stranded questions on this topic on the forum and on the web already.

    The CPU usage is 2-6% on the i7 920 vista 64bit computer. The audio doesn't seem to be dropping. Some more clues that might help you help me
    - The quality of the video doesn't matter, 360p drops frames just as often as 720p or 1080p.
    - The dropped frames still occur even when the video is completely downloaded and replayed without any buffering needed.
    One thing that does fix the dropped frames is completely disabling my sound card in the windows playback sound options. This also fixes the second computer's dropped frames which only has onboard realtek audio. I have tried using a Creative PCI sound card and the built in realtek sound but they both behave the same. The latest drivers were installed for both.

  • Flash Media Live Encoder Support

    Might LCCS's future roadmap include possible support for using Flash Media Live Encoder (FMLE) for higher quality video/audio capture and encoding?  Or will LCCS continue to be limited solely to encoding by Flash Player (VP6)
    Thanks,
    g

    Hi,
    Right now FMLE does not support Alpha channel. Its Video encoeder encodes data from YV12 format.
    Even latest release of FMLE is not supporting alpha channel. If you want this to be implemented then you can add this as Enhancement bug in Adobe site for Flash media encoder product.

  • FME disconnects randomly while live encoding

    Hello,
    when doing a live encode with Flash Media Live Encoder 3 to FMS 3.5, the encoder disconnects randomly after 1 to 8 minutes. It takes about 50 seconds for the encoder to recognize the lost connection, then it re-connects. I tried to encode from different locations, but the problem remains.
    Thank you very much for any help.

    I suspect the problem with Network connection;
    If not tried earlier; can you try running FMS & FME  on LAN connected machines or (better) on the same machine; If it works fine that it would just confirm that indeed network connection has some trouble.

  • Flash Player 10.1 is jerky and freezes - Apple Mac

    I have a MacBook (a 2.4 GHz Intel Core 2 Duo with 2 GB of memory (1067 MHz DDR3)) running OS10.6 and  had an issue with Flash 10.1 - ie. it was jerky and the picture would occasionally freeze... BUT  only when trying to play a live stream. Note, watching highlighted clips were fine - ie. the quality of the playback was not jerky.
    Anyways, I managed to resolve this issue by TURNING OFF the Hardware Acceleration feature within Flash Player 10.1 - which comes switched on as a default. To turn off the Hardware Acceleration feature, select the link shown below, then control-click the animated Flash Player logo and select 'Settings' from the displayed options. This will open and display the Adobe Flash Player Settings option box. Simply click inside the ticked-box next to the words: Enable Hardware Acceleration, which disables this option. It also means that you should now be able to watch live streaming using Flash Player 10.1 on your Apple Mac without the feed being jerky or freezing etc.
    The required link for resolving this issue is: http://www.adobe.com/software/flash/about/
    (but remember, one has to conrol-click the animated red Flash Player logo when first shown etc.)
    A big thanks to eidnolb for helping to resolve this issue for me (and for you too).
    ^o^

    Hi Bob, Great!! Excellent choice of subject. Thanks for starting your thread and the great post including the issue, the solution and instructions:-)
    It is always nice to have your computer working as it should. Thanks for marking your thread as answered as we have many Mac users posting to the Flash Forum.
    Regards,
    eidnolb

  • Setting text encoding for Flash when being used

    Many Korean web sites use Flash, and many of them are made in
    the text encoding "windows Korean"
    when I use windows it shows those sites as intended because
    the text encoding of flash player in windows is set to "windows
    Korean"
    but on my mac, I believe Flash player uses UTF-8 regardless
    of my web browser setting and many Korean Flash web sites don't
    work as intended.
    Is there something I can do to make them show windows-Korean
    encoded characters? Any suggestion appreciated. Thank you.

    Ok, thank you. I gave up trying to understand html right around when the "blink" tag came out, and I just get paranoid every time I do a reinstall that I'm missing some critical part. I like the validator-- never knew about that.
    Now, if you do a search on the source code for that ETToday page, somewhere far down you'll come to another section that reads:
    <head>
    <title>Untitled Document</title>
    <meta http-equiv="Content-Type" content="text/html; charset=big5">
    blah blah blah
    This does appear to be properly formatted, and maybe it's there specficially for English-default browsers. However, perhaps neither Safari nor the validator are picking up this, or maybe it's referring to something else altogether?
    thanks,
    dave

  • How to avoid flash player out of memory problems

    hi all,
    when i am running my swf file i am getting the message saying
    that " flash script causes flash player run slowly do u want abort
    script ". even it's not the problem of infinite loop.in that i am
    passing huge data.
    please help me how to avoid this situation.

    It is not apparent from your posting, but if you are parsing
    large amounts
    of XML data you could be faced with this issue if not just a
    general
    performance issue.
    Solution is look at how to consume the data in smaller
    pieces. In other
    words only download the needed data to deal with the
    immediate needs of the
    Flash movie and based on user interaction load additional
    data. A possible
    drawback is where user interaction required the data
    instantly such as
    rollovers for large numbers of objects.
    Another solution is look at streamlining the data such as
    reducing nested
    levels in XML.
    Finally you may have an infinite loop that depends on the
    data. With test
    data the code runs fine, however certain values trigger an
    indefinite loop.
    I am working with a few large corporate clients and the
    mentality of dumping
    data in large vats to the client does not take into
    consideration the
    technology and performance. It should be the other way round
    -- know the
    capacity of the technology which is the Flash player.
    Lon Hosford
    www.lonhosford.com
    Flash, Actionscript and Flash Media Server examples:
    http://flashexamples.hosfordusa.com
    May many happy bits flow your way!
    "kalyanchakri" <[email protected]> wrote in
    message
    news:ed42oe$l6j$[email protected]..
    > hi all,
    >
    > when i am running my swf file i am getting the message
    saying that " flash
    > script causes flash player run slowly do u want abort
    script ". even it's
    > not
    > the problem of infinite loop.in that i am passing huge
    data.
    > please help me how to avoid this situation.
    >
    >

  • Flash player h264 live streaming dropping frames

    Hi
    For some reason i noticed Flash player h264 live streaming is dropping frames very rigorously when streaming to fms 3.5. There are no frames dropped on client camera end. Dropped frames correspond to  NetStreamInfo. The output is thus very jerky. This happenbs no matter what settings i use (176 x 144 @10fps). CPU usage is well below 50%.
    I noticied that if i stream the same to Red5 1.0 i do not get any frames dropped. The output is perfect as expected. Can some one please help out on this.

    Also i can confirm that the encoder used in FMLE and flash player 11.1 or above is not the same. The medium quality preset in FMLE uses "
    Bandwidth           300kbps
    Quality                Dont know
    fps                      20
    keyframeInterval  5sec
    If i use the same settings in flash player 11.1 i get heavy framedrops and bad playback no matter what quality i use. So this confirms that both encoder are not the same as adobe claims.
    On the other hand i sure would love to know why setting bandwidth to 0 creates a smooth stream without framedrops. I will request someone from adobe team to answer me here.

  • Audio player not give an option on the Adobe Flash Media Live Encoder

    Audio player not give an option on the Adobe Flash Media Live Encoder:  How do I resolve this problem?

    Please ask your question on Adobe Media Encoder forum: http://forums.adobe.com/community/ame
    This forum is for Adobe Reader.
    ~Deepak

  • Adobe Media Encoder CC won't start if flash player plugin is installed

    Few days ago I installed windows 8.1 pro on a brand new PC and I was having problem starting AME, clicking on icon simply doesn't sort any effect, the software didn't open. I tried starting it as administrator, deleting \AppData\Roaming\Adobe\Adobe Media Encoder\, reinstalling any CC program and even using AdobeCreativeCloudCleanerTool didn't solve the problem.
    At the same time, I was having problem with flash player and firefox; it was just crashing at start, for example at the beginning of a youtube video. Even reinstalling the plugin or firefox itself won't resolve the issue. I resolved by disabling protected mode on flash and after that, the plugin works perfectly in firefox.
    Going back to the AME problem, after a few tries, I managed to resolve it by doing this:
    - uninstall Premiere pro and relative AME
    - uninstall Creative Cloud app
    - uninstall flash player plugin
    - run AdobeCreativeCloudCleanerTool and clearing ALL the stuff
    - install CC app
    - install PP and relative AME
    - NOT INSTALLING flash player plugin for firefox
    Only by doing this, AME starts without any problem. Even after a couple of reboots, it starts nicely.
    After that, I tried to reinstall flash player plugin for firefox. Just after install, with firefox still closed, i disabled the protected mode to avoid any crashes. And by this point, AME won't start anymore. By just installing the flash player plugin (without even let it crash once) AME doesn't start. The only thing that worked was to uninstall everything again, use the cleaner tool, reinstall CC and leaving firefox without the flash plugin. At this point AME starts without any problem. I tried again to reinstall flash plugin and voilà, again AME simply can't start.
    What should i do to fix this? It sounds so stupid that i have to choose between flash plugin or AME, why they can't live togheter on my system? Maybe i just have to wait for an update (for firefox or flash) and see if it changes anything?
    Here are some specs of my system, if it helps:
    winows 8.1 pro x64 updated
    16gb ram
    Intel i7 3820
    GeForce GTX 670
    latest version of flash, CC and firefox
    no plugins installed for any CC software
    flash on internet explorer works well

    I finally find out how to fix this.
    With flash plugin installed and protected mode disabled, I also disabled hardware acceleration in flash plugin options. So I re-enabled protected mode and the plugin worked fine.
    After that, I uninstalled everything from adobe, used cleaner tool and than reinstalled all the stuff. Now AME works fine.
    Hope this fix will help someone.

  • PDF error A script in this movie is causing Adobe Flash Player 10 to run slowly.

    When opening a PDF of a website using Acrobat 9.0 Professional, I am recieiving the following notification.
    A script in this movie is causing Adobe Flash Player 10 to run slowly.  If it continues to run, you computer may become unresponsive.  Do you want to abort the script?
    The error does not occur when viewing the live website from which the PDF was made.
    I recieve the same error when trying to open the PDF on other PCs using Adobe Reader 9.
    I have updated the flash player on each of the PCs as well.
    I am wondering if anyone has any ideas or insight regarding why I am recieving this notification.
    Thank you

    I'm suddenly getting the same error message, on a variety of web sites.  I'm running Windows Vista on a fairly high-end desktop, and I haven't added any new software lately.  This just started up out of nowhere.  When searching for this error message on the web, people are asking this same question all over the place, and no one has an answer.  Does Adobe ever monitor these forums?

  • Can any one tell me when i use adobe flash media encoder how can i see my live vidoes on flash media

    can any one tell me when i use adobe flash media encoder how can i see my live vidoes on flash media server . thnx

    Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
    The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    Hack Allows PowerPC Macs to Access Flash 11 Content
    http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
     Cheers, Tom

Maybe you are looking for

  • How to connect my iPad to my laptop when it has never been connected to a device before

    i need to update my iPad to the new iOS and i need more space in order to do it, i have over 3,000 photos that i dont want to use not to mention game save data that i ideally dont want to loose. it has never been connected to any other device before

  • Getting compile time errors during gwt application compilation

    Hi, I am getting below compile errors while running ant script for my GWT application. javac: [javac] Compiling 32 source files to D:\Projects\workspace\MckSurvey\war\WEB-INF\classes [javac] D:\Projects\workspace\MckSurvey\src\com\spinsci\survey\clie

  • EDK 5.0.2 and JDeveloper

    Is the EDK 5.0.2 compatible with JDeveloper ? Does Plumtree have any instructions for setting this up ? Thank you. Mike Rohm Plumtree PCS

  • Some get there $200 back, some don't

    From what I've read if you bought your iPhone from the Apple online store, you can get a $200 credit or refund. However, if you bought your phone through AT&T, you're pretty much screwed. And that really adds an extra layer of insult to this injury.

  • Can't connect or incomplete connect to internet after updating to 10.5.5!!!

    Hi I am having a problem connecting to the internet since I updated (via Software Update) to 10.5.5. There is not a problem with the house internet connection, because 2 other PC's here are connecting fine. I get full wireless strength, my VPN tunnel