H264 video clip looses sound when imported to FCP X

I have a simple sequence in FCP X for a presentation.  It includes several photographs plus two video clips.  They are H264 and have audio.  But, when I import these two clips to my sequence, one of them looses its audio.  For the life of me I can't figure out why.  It comes in without its audio wave form and has no sound.  Any suggestions?

Post a screen shot of the clip in the browser in list view with waveforms and a screen shot of the timeline with waveforms displayed.

Similar Messages

  • Only half of the video clips have sound after import to Premiere Pro

    Hi!
    When I import my .MTS fukes into Premiere Pro 2014 longer clips loose sound after half the clip. The clips themselves have sound because they are with sound when I watch them using VLC.
    How can this sound issue be solved?

    Thanks for the screenshot.
    Hmm. I don't recall any other reports of a problem like this with MTS files. [Just today I was working on a similar issue with P2 content, but it was limited to spanned clips. Hence that question...]
    First thing I'd try is to clear the media cache files, at least for the affected clips. You should find those files here: C:\Users\<username>\AppData\Roaming\Adobe\Common\. If not there, then check Preferences>Media.

  • P2 card video out of sync when importing to FCP

    Trying to transfer P2 card video (specs on file show 720P60 960x720 59.95 FR with time code 30FPS NDF. P2 plugin is installed and I can view the clips in log and transfer fine. But when importing into FCP the audio is OK but video is slow motion and out of sync. Help what can I do?

    Go into the LOG AND TRANSFER preferences, that sprocket menu on the upper right, and uncheck REMOVE PULLDOWN.  It really needs to be defaulted to OFF.  It causes so many issues.

  • Video does not play when imported from FCP

    When I import a clip from FCP into motion the clip opens up however only one frame shows up in the motion viewer. When I press play, there is no video..only that particular frame that was showing.
    The media tab shows the .mov file, and plays it in seperate window when i double click on it.
    Thanks for helping me out.

    How do you bring the file into Motion and what file are you actually opening in Motion?
    Are you exporting your FCP project as QT? or
    Are you sending your FCP project to Motion?
    Regards,
    Hisham

  • Firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result.

    firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.

    Glad you seem to have sorted things out.
    The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems.

  • No sound when importing video CS3

    Hi Guys
    Here's my situations. I am a media technician in a school and have a PC running windows 7 and Premier Pro CS3 installed. We have just got some new Lenovo G700 laptops (Windows 8) and I have installed Premiere CS3 on these using the original instal disks.
    When I import a video on the laptops I am not getting any sound, when i drag the video onto the timeline there is no audio track. If i use the same video on my PC it works ok! I have had the settings side by side an the ONLY difference I Can see is under the info tab when clicking a video in the project is says 'VIDEO' on the laptops and on my PC it says 'MOVIE' other than that everything is the same!
    Any ideas?
    One other thng, the videos play using WMP on my PC with no problems, however on the laptops they freeze and only play the audio, so I was thinking maybe a codec issue? but I have never gone out my way to instal a codec on the PC it's just always worked

    Ryan,
    Welcome to the forum.
    A MOD will likely Move this post to the Premiere CS4 & Earlier sub-forum, but your link, and any e-mail subscriptions will follow.
    One of the main causes of no Audio, or truncated Audio, on Import is the failure of Audio Conforming not completeing 100%. This article goes into more detail, and offers tips: http://forums.adobe.com/message/3892177#3892177
    The Conforming of the Audio is for Premiere, so being able to PLAY the muxed file in WMP is not a good test, other than to insure that the file does contain an Audio Stream.
    Good luck, and please let us know if this is an Audio Conforming issue.
    Hunt

  • No sound when importing video

    I am importing video into iMovie using a Canon Elura 85. The DV port does not work on the camera, so I have a cable with 3 RCA plugs on the end that goes from the camera's AV port that connects to my Canopus. I plugged two of the RCA plugs into the Left and Right audio ports on the Canopus, and one RCA plug into the video port. I am able to see the video image show up in iMovie's import screen, but there is no sound. How can I solve this? Thanks.

    iMovie does not play sound on import. Most cameras that iMovie supports do not import in real time, so sound is not meaningful. It could be useful for those with tape based cameras, but these cameras usually have a speaker so you can hear it on the camera.

  • No sound when importing from a Sony HDR-HC7

    Hello all together,
    I bought a new Sony HDR-HC7, the camera is fantastic. There is only one thing perplexing me: When importing HD-Clips into iMovie HD 6.0.3 I cannot hear the sound that was recorded by the camera. When I play the clips, I can hear sound. What could this be?
    With my old Sony TVR 33 (no HDV) I don't have this problem.
    Did I forget any settings?
    Thanks for advices,
    Stefan

    Hi Stfan:
    I guess I would try the easy things first.
    Make certain that " Video Play Through Camera " is
    not enabled in imovie Preferences. That is
    because it sends all audio through the FireWire port
    and mutes it on the computer.
    ake certain your video is 16-bit audio (not 12-bit).
    Once you have imported (and saved) the video into
    imovie, close imovie. Then unplug all firewire
    devices (camera included).
    Relaunch imovie. Is the audio there now?
    Sue
    Hi Sue,
    thank you for your advice. As I use the German version I am not quite sure, if "Video Play Through Camera" is in the third tab of the iMovie-Prefs the fourth checkbox overarm? This one's unenabled. Audio is 16-bit.
    Audio was alwas there in the play-mode but not in the import-mode.
    Stefan
    MacPro 2,66 - 2 GB RAM/PB G4 1,5 15"   Mac OS X (10.4.8)  

  • No sound when importing mpg file

    I have used several camcorders as sources for video clips. All of the clips can be imported to my Premiere Pro CS4. The problem I am having is that the mpg files from one of the cameras, when importing the clip, the video comes through fine, but the sound does not come through at all.

    Is the problem MPEG file using MPEG audio or Dolby audio format?
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Loosing quality when import-export file

    I am just wondering, if I loose some quality when I - lets say- an Apple Pro Res 422 HQ 1080p video clip, I import to FCP, do some modifications, export to Pro Res 422 HQ again, import it to Photoshop, do some more modifications> export to the same, but find, I need to work in FCP again, import it, do some modification and export it again to Pro Res 422 HQ. Would there be a visible quality loss?
    Dorian

    Try this.
    Make a copy of a clip.
    Take the copy and edit/color/alter the images using all the operations you would normally.
    Then, look at the original clip vs the altered clip on external monitoring devices (including scopes) to decide if you have an issue.
    Good luck.
    x

  • 6 minute Keynote with video clips keeps crashing when Export  to Quicktime?

    I have a very important presentation I need, it has some video clips in I created in LiveType, and I export to Quicktime, using the default settings, it keeps crashing. The last time I tried it was this morning, it processed for 2 hours, at the last slide was when it froze up and crashed my computer. I am in desparate need of help. What am I doing wrong? I am using Quicktime Pro 7.0.4
    Thanks in Advance for your reply to my Post,
    Sebastian

    I have a very important presentation I need, it has some video clips in I created in LiveType, and I export to Quicktime, using the default settings, it keeps crashing. The last time I tried it was this morning, it processed for 2 hours, at the last slide was when it froze up and crashed my computer. I am in desparate need of help. What am I doing wrong? I am using Quicktime Pro 7.0.4
    Thanks in Advance for your reply to my Post,
    Sebastian

  • Footage Looses Quality When Imported!?

    I worked on footage in Motion from FCP and then when I saved in Motion and went back to FCP the quality was reduced. I then went into Motion and exported it and when I imported the footage and placed the footage in the viewer the quality was normal, but when I dragged it down into the timeline, the quality is reduced even before I render. Any ideas, thanks!

    capture footage in iMovie 06, import to FCP...
    Why? Why did you capture with iMovie if you are working with FCP?
    #20 Using iMovie to Capture for FCP edit
    Shane's Stock Answer #20: Using iMovie to Capture for use in FCP.
    iMovie handles the media differently from FCP, specifically where audio is concerned. So it is not a recommended workflow. Here's why...
    iMovie captures using DV Stream (.dv) standard which does not use timecode. That is a big disadvantage over the way that FCP captures in that you can't go back and recapture the material at a later date if you need to revisit a project.
    The DV/NTSC specification (the one FCP uses) also calls for seperate tracks for audio and video, even if you capture it as one clip. iMovie' DV stream format is muxed audio and video, which means that they are tied together (I can't get into specifics because I ain't no engineer or programmer). FCP is a bit more demanding and captures the seperate audio/video tracks, either in a single media file or as seperate video and audio files. With FCP you could capture video only or audio only because each is defined by the DV specs. while with iMovie you can't.
    Also, if you drop the iMovie footage into the timeline, your will get the RED render bar forcing you to render the footage in order to see it. You can use either QT Pro or Compressor to convert the .dv footage into DV/NTSC in order for FCP to work with it without needing to render.
    Shane

  • Loose sound when fuzzy logic 4 is used

    hi everyone
    when i run fuzzy logic 4 in turbo mode i loose my sound, my mainboard is the MSI 845gmax with a 1.8 pent 4 with 1 gig of ddr2100, i have the ac97 audio,i did upgrade to all current drivers,i only loose the sound when fuzzy is in turbo mode to overclock,any help on this one?

    The timing control for onboard sound and onboard video is taken from the pci bus as well as any card that are inserted.  When you overclock the fsb you also overclock the onboard sound chip as well.  At some point this chip can not keep up and fails.

  • Keyboard Shortcut for adding clip to queue when importing from P2 card

    Does anyone know what the keyboard shortcut is for adding a clip to the queue when importing from a P2 card? Thanks!
    G5   Mac OS X (10.4.8)  

    That would be the Log Clip button which is defaulted to F2.

  • My iphone has a loose sound when you shake it

    hi guys before I go to apple store i just want to know if you guys experiencing my problem with my iphone 5 when you shake its like there something loose sound coming from the camera (i hate it so much )because i pay for this phone

    I don't think the two are related.  The noise is most likely the camera's autofocus mechanism and is normal.  Wifi issues are not normal.  Search this forum for iP5 wifi issues to look for solutions.

Maybe you are looking for

  • Price can not be determined for pr in cj20n

    hi i am making pr in cj20n before saving message is coming "<b>Price cannot be determined for material 4000008727 Message no. CO283 Diagnosis An error occured when determining the price of a requisition. Possible causes: •     The system could not de

  • What does this mean and what do I need to do to fix this?

    Hi so I was trying to back up my MacBook on my Time Machine with the Time Capsule. However it wont let me back up and displays the following message: Time Machine could not complete the backup. The backup disk image "/Volumes/DATA/Charlie Mackenzie's

  • How do I transfer data from two computers onto my new mac?

    I recently bought a new macbook pro with retina display after owning an iBook G4 and a powermac for 7 years but I now want to transfer the data from both of my computers (which both only have one account) onto my new computer. I'm wondering if it is

  • Download EhP4 packages for ECC 6.0 including EhP1 for NW 7.0

    Hi experts, I have the following problem. I must update an existing ECC 6.0 system to NW EhP1. I found it is not possible to update only the NetWeaver but the whole ERP 6.0 must be updated to EhP4. The system is registered in Sol. Man. as ECC with no

  • Event For Field Validation in Table maintenance generator

    Hi Friends, i need to validate the filed in my ztable , when the value is entered in to that field i,e if the value of that field is > 100 its should give error message. I already wrote code in the event  "Creating A New Entry" of event nor 5 as foll