[H61M-P20/ S20 (G3) Beta UEFI Bios [E7788IMS.1xx Releases]

E7788IMS.190 ==> E7788IMS.1A1 Beta UEFI Bios
Add UpdateBiosAndME function error message issue.
Set ME Setting "M3 Power Rails Availability" as false.
Fixed Avexir 2400(patched before) S3 wakeup failed.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

Similar Messages

[ZH77A-G43] BETA UEFI Version [E7758IMS.1xx Releases]

E7758IMS.160 FULL RELEASE BIOS
- Support Windows8 Feature.
- Update CPU Micro Code.
- Update ME8.1 1318 firmware.
- Update onboard Realtek UEFI driver.
- Improved gaming keyboard compatibility.
- Auto select UEFI/Legacy mode by VBIOS & system BIOS.
This is the full release bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<Intel Downloads / Management Engine>>
Please note that flashing this release occurs entirely at your own risk!

E7758IMS.160 ==> E7758IMS.183
01.Fix whql test fail after support 18 languages.
01.Fix system reset on 0x55 issue when use Sandy Bridge G440 CPU and install two 4G memory.
02.Modify watchdog timer function code.
03.Fix PCIE GEN3 display card issue.
04.Fix 'Integrated Graphics Share Memory' and 'DVMT Memory' item show incorrect.
05.update realtek uefi pxe rom.
06.Fix NV's GOP crad will lag & freeze in setup when win8 Enable.
07.Fix press DEL key can't entry BIOS Setup when fast boot enabled after.
08.Modify fast boot default to disabled when win8 disabled.
09.Fix USB Support and Fast Boot item help string show error issue.
10.Add to switch T1,T2 orT3 Mode To Thermistor for fintek.
11.Fix SATA Devices Support function error issue.
12.Fix ps2 keyboard can't use in os when msi fast boot enabled.
01.Fix USB3.0 can not work when OC genie enabled.
02.Fix oc profile fail.
01.Add EIP99882 to fix Win8 OS will hang 0D when set usb support to Partial Initial after reset.
02.Modify OC Genie Mode help string.
01.Fix USB mouse cannot be use under UEFI bios setup issue if you plug the mouse after booting up the system.
02.Add GOP hot-plug solution.
03.Fix the issue that hot plug usb device will clear screeen when cpu memory changed OR oc fail message appear.
04.Fix post process, the phenomenon of the dialog box will appear if you press F12 Key some cases there will be the phenomenon of the crash.
05.Modify PS/2 Mouse&KB wakeup help string.
06.Fix WIN7 64 Bit OS S4 resume fail issue when BIOS Setup install password and password check set boot mode.
01.Remove F1,F2 information after clear CMOS.
01.Fix system will reset after clear cmos and press F1.
02.Add F1,F2 information after clear CMOS.
01.Fix F12 issue for two ps2 port bom.
02.Modify BIOS Setup USB Support item.
03.Modify DMI type1 and DMI type 2 Manufacture from write once to unlimited.
01.Add UpdateBiosAndME function error message issue.
02.Add some spi rom support.
03.Fix quit without saving will reset when connect a uefi os.
04.Patch Fast Boot "SATA Device Support" disabled function fail.
05.Replace SATA port automatically shut down when in WIN8 64 bit OS the shutdown.
06.Update the solution of "Fix USB3.0 cannot work when OC genie enabled".
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

[FM2-A85XA-G65] BETA UEFI BIOS [E7793AMS.1xx]

E7793AMS.125
Warning! BIOS update is risky, proceed at your own risks!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Please unplug the power cord from PSU, or switch it off completely and >>Clear CMOS Guide<< after flashing.

Changes:
E7793AMS.110 ==> E7793AMS.125
01. win8 solution.
01. Add solution for OCZ PCI-E SSD card & Star tech TV card.
02. Add solution for Geforce GTX295 HANG 33.
01.Fix the Corsair CMZ32GX3M4X1866C10 memory show wrong XMPinformation in setup.
1. Remove eModule - Trinity-AGESAPI_FM2;4.6.5.1_TrinityPI_019
2. Remove eChipset - AMD Trinity-Hudson / Richland-Bolton;4.6.5.1_RL_002_SB_018
3. Remove Flavor - Trinity-AGESAMSI;
4. Remove eModule - MsiOc - Trinity;
5. Add eModule - Trinity-AGESAPI_FM2;4.6.5.1_TrinityPI_020
6. Add eChipset - AMD Trinity-Hudson / Richland-Bolton;4.6.5.1_RL_005_SB_021
7. Add Flavor - Trinity-AGESAMSI; 4.6.5.1_Trinity_AGESAMSI_020-1
8. Add eModule - MsiOc-Trinity; MsiOc_Trinity_122
1. Fix OCG button GPU Freq setting.

[FM2-A75IA-E53] BETA UEFI BIOS [E7792AMS.1xx]

E7792AMS.10K
Warning! BIOS update is risky, proceed at your own risks!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Please unplug the power cord from PSU, or switch it off completely and >>Clear CMOS Guide<< after flashing.

E7792AMS.10L ==> E7792AMS.112
01. Support win8 function.
02. Updated Trinity-AGESAPI_FM2 to 4.6.5.1_TrinityPI_021.
03. Updated AMD Trinity-Hudson / Richland-Bolton to 4.6.5.1_RL_005_SB_022.
04. Update Trinity-AGESAMSI;4.6.5.1_Trinity-AGESAMSI_021-1.
05. Update MsiOc - AMD Trinity;MsiOc_Trinity_124.
01. Fix bluetooth and wifi whql test fail issue.
02. Adjust "CPU Base Frequency" default as 103 when choose OC Geine mode.
03. Add module Hardware Signature Management.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

[Z77A-GD80] BETA UEFI Version [E7757IMS.1xx Releases]

E7757IMS.132
1. Enhanced Windows 8 Support including feature set
2. Fixed issue with Roccat ISKU Keyboard can not work.
3. Added GOP support
4. Updated ME to 8.1.2.1318
5. Memory patches
6. Fixed some 2133 memory XMP function fail
Warning! BIOS update is risky, proceed at your own risks!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Please unplug the power cord from PSU, or switch it off completely and >>Clear CMOS Guide<< after flashing.

E7757IMS.162
01. Update CPU Microcode for Ivy Bridge E-1 and L-1(M12306A9_00000019).
&Update CPU Microcode for Sandy Bridge Q-0 and D-2(M12206A7_00000029).
02. Add solution to fix System hang up "A2" with some hard disk.
03. Adjust Fast Boot PS2 Devices Support disable function incorrect solution.
04. Remove Switch to PLL mode for clock buffer solution.
05. Patch Fast Boot PS2 Devices Support disable function incorrect.
06. Update ME 8.1.40.1416.
07. Modify the PCH Sata Aggressive LPM Support item default value.
08. Switch to PLL mode for clock buffer.
09. Fix can't detect LSI 9270-8i RAID card.
10. Fix LSI 9270-8i RAID card can be detected in BIOS when Windows 8 feature enabled,
but the option has display garbled.
11. Fix GetVariable compatibility issue while enable Win 8 feature upon MahoBay codebase.
12. Patch some memory user mannule set tcl=12 can't boot when dram frequency>2600MHz.
13. Fix clear cmos after boot option priorities show error issue.
14. Fixed build-in shell disappear issue when update FixedBootOrder13 module.
15. Disable "Secure Boot"when "Windows 8 feature" set from "Enabled" to "Disabled"
to patch some NV's graphics card capability issue.
16. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
17. Fix some monitor hang B2 issue.
18. Change French language error in the option "Load Overclocking Profile x".
19. Limit Snapshot to be triggled just one time while system with multiple USB keyboards plug.
20. Update SMBIOS module ver 34.
21. Improve OC memory(2600Mhz+) capability for Intel 7 series project.
22. Replace SATA port automatically shut down when in WIN8 64 bit OS the shutdown.
23. Fix WIN7 64 Bit UEFI OS S4 resume fail issue.
24. Fix post process, the phenomenon of the dialog box will appear
if you press F12 Key some cases there will be the phenomenon of the crash.
25. Fix select BIOS Setup Discard Changes and Exit item after can't enter os issue.
26. Fix F12 Snapshot function error issue when post press F12 and Del key.
27. Patch NV Quadro NVS450 card S3 fail.
28. Add "Long Duration Power Limit","Short Duration Power Limit","Primary Plane Turbo Power Limit",
"Secondary Plane Turbo Power Limit" range to 4096.
29. Fix it will show error characters in Boot device priority after disable some boot options.
Warning! BIOS update is risky, proceed at your own risks!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Please unplug the power cord from PSU, or switch it off completely and >>Clear CMOS Guide<< after flashing.
Please use option 1 of the forum flash tool and point to the compressed archive in order to flash the Management Engine extension of bios.

[X79A-GD45] BETA UEFI Version [E7735IMS.1xx Releases]

E7735IMS.160 ==> E7735IMS.17A
1. Change memory run XMP timing solution when memory frequency is >=1866MHz
2. Auto adjust Voltage when Dram frequency manuel select memory frequency >=1866MHz and XMP is disable.
3. Fix 2 profile XMP Dram frequency information incorrect issue when XMP function and XMP function with My OC Genie select to diffrent profile.
4. Fix XMP Dram frequency information incorrect issue with special XMP speed like 1750MHz or 2250MHz.
5. Fix Vdroop Offset Control item setting incorrect issue.
6. Add the Network stack item.
7. Patch A4tech 7100 wireless combo keyboard can't use in setup.
8. Patch UEFI device Boot Option Priorities always on 1st Boot after UEFI OS HDD removed.
   9. Fix the BIOS boot hang B2 issue.(This could happend in post runtime remove storge device)
10. Fix S4 resume issue. (when e820 memory table corruption on the Ready to Boot event)
11. Fix when BCLK select to 103MHz,current dram frequency show different to adjusted dram frequency.
1. Add setup voltage item keyin function support
1. POST LED will show CPU Temp after boot.
2. Add tRFC option range to 450T.
3. Fix XMP-1500MHz memory enable XMP,adjusted memory frequency show 1500.
4. Fix kernel-Processor-Power error in windows when adjusetd cpu ratio.
1. Patch keyin function code behavior.
2. Move Internal PLL Overvoltage function to PEI phase.
3. Change OC Genie Dram Volt to XMP volt instead of fix 1.65v.
1. Add setup item "PCI ROM Priority" and default as "Legacy ROM".
2. Fixed DMI type17 show error(only for 4 dimm model).
1. Hide item "PCI ROM Priority" and default as "Legacy ROM".
2. Set Option "EUP 2013" default to disable
1.Support CPU ratio keyin function.
2.X79 support MRC cold boot fast function.
   3.If plug 2 different XMP dram, auto gray XMP item.
   4.Fix system can be wakeup from S4/S5 by PS2 keyboard when "Resume From S3/S4/S5 by PS2 Mouse" is set to enable and "Resume From S3/S4/S5 by PS2 keyboard" is set to disable.(vice versa)
1. Fix show CPU or memory change information when system boot.
1.When use not K series CPU ,don't auto disable C-state when manual set CPU ratio > 4
     core turbo ratio + overclockbin.
   2.Disable Power button when NVRAM writing.
   3.Add AMP Memory support.
   4.Fixed X79 MRC Boot time too long.
   5.Fix system random hang and can't boot to OS issue when use AMD Patriot AP38G1608U2K memory.
   6.Patch after update GSE,some item can't be adjusted.
   7.Fix XMP memory Dram voltage error.
   8.Add OC Retry Counter Item.
   9.Add Gigadevice 25Q64BSIG SPI ROM support.
     Change SMLink1 Thermal Reporting Select to true.
   10.Fix E5 2665 CPU hang "5A".
   11.Patch CORSAIR CMZ8GXM3M2A1866C9 enable XMP can't boot issue.
   12.Fix tRTL & tXP always show 0 after update RC code to 4.6.4.1_Intel_SandyBridgeE_18
   13.Patch new CPU 3970X "adjust CPU ratio in OS" function error.
   14.Fix sometimes system will hang up in the shutdown process after idle it for some time.
1.Set CPUEnergyReadEnable & CPUTempReadEnable default to disabled.
2.Fix Keyin function.
3.Add the solution about " windows boot manger".
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

E7735IMS.160 ==> E7735IMS.17A
1. Change memory run XMP timing solution when memory frequency is >=1866MHz
2. Auto adjust Voltage when Dram frequency manuel select memory frequency >=1866MHz and XMP is disable.
3. Fix 2 profile XMP Dram frequency information incorrect issue when XMP function and XMP function with My OC Genie select to diffrent profile.
4. Fix XMP Dram frequency information incorrect issue with special XMP speed like 1750MHz or 2250MHz.
5. Fix Vdroop Offset Control item setting incorrect issue.
6. Add the Network stack item.
7. Patch A4tech 7100 wireless combo keyboard can't use in setup.
8. Patch UEFI device Boot Option Priorities always on 1st Boot after UEFI OS HDD removed.
   9. Fix the BIOS boot hang B2 issue.(This could happend in post runtime remove storge device)
10. Fix S4 resume issue. (when e820 memory table corruption on the Ready to Boot event)
11. Fix when BCLK select to 103MHz,current dram frequency show different to adjusted dram frequency.
1. Add setup voltage item keyin function support
1. POST LED will show CPU Temp after boot.
2. Add tRFC option range to 450T.
3. Fix XMP-1500MHz memory enable XMP,adjusted memory frequency show 1500.
4. Fix kernel-Processor-Power error in windows when adjusetd cpu ratio.
1. Patch keyin function code behavior.
2. Move Internal PLL Overvoltage function to PEI phase.
3. Change OC Genie Dram Volt to XMP volt instead of fix 1.65v.
1. Add setup item "PCI ROM Priority" and default as "Legacy ROM".
2. Fixed DMI type17 show error(only for 4 dimm model).
1. Hide item "PCI ROM Priority" and default as "Legacy ROM".
2. Set Option "EUP 2013" default to disable
1.Support CPU ratio keyin function.
2.X79 support MRC cold boot fast function.
   3.If plug 2 different XMP dram, auto gray XMP item.
   4.Fix system can be wakeup from S4/S5 by PS2 keyboard when "Resume From S3/S4/S5 by PS2 Mouse" is set to enable and "Resume From S3/S4/S5 by PS2 keyboard" is set to disable.(vice versa)
1. Fix show CPU or memory change information when system boot.
1.When use not K series CPU ,don't auto disable C-state when manual set CPU ratio > 4
     core turbo ratio + overclockbin.
   2.Disable Power button when NVRAM writing.
   3.Add AMP Memory support.
   4.Fixed X79 MRC Boot time too long.
   5.Fix system random hang and can't boot to OS issue when use AMD Patriot AP38G1608U2K memory.
   6.Patch after update GSE,some item can't be adjusted.
   7.Fix XMP memory Dram voltage error.
   8.Add OC Retry Counter Item.
   9.Add Gigadevice 25Q64BSIG SPI ROM support.
     Change SMLink1 Thermal Reporting Select to true.
   10.Fix E5 2665 CPU hang "5A".
   11.Patch CORSAIR CMZ8GXM3M2A1866C9 enable XMP can't boot issue.
   12.Fix tRTL & tXP always show 0 after update RC code to 4.6.4.1_Intel_SandyBridgeE_18
   13.Patch new CPU 3970X "adjust CPU ratio in OS" function error.
   14.Fix sometimes system will hang up in the shutdown process after idle it for some time.
1.Set CPUEnergyReadEnable & CPUTempReadEnable default to disabled.
2.Fix Keyin function.
3.Add the solution about " windows boot manger".
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

Z97 GAMING 5 BETA UEFI Version [E7917IMS.1xx Releases]

E7917IMS.170 ===> E7917IMS.181
Changes:
* Fixed the Cooler Master Storm Havoc and Cooler and Storm Reaper
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.

E7917IMS.180 ===> E7917IMS.191
Changes:
01. Patch HDMI to D-Sub connect may cause VBIOS display error.
02. Update MSI GSEII module to 4.6.2_TSE_2_17_1246_m120
a. Fix complier issue when ClickBIOSUI dump to version m020.
b. Fix Memory Try It item dialog don't show when item is over 16.
03. Down ClickBIOSUI module to ClickBIOSUI_m020
04. Fix boot device error when system plug Samsung M.2 SSD + Asmedia SATA port & SB SATA
port both have SATA device.
05. Patch PE test hang A2 after clear CMOS.
06. Update MSI GSEII module to 4.6.2_TSE_2_17_1246_m119
a. Fix XMP button is not active in UEFI mode.
b. Fix ChangeLog dialog support Page Up/Down, Home and End key.
c. Fix the WIN8 logo will disappear after reset BIOS When installing WIN8.1.
07. Update MFLASH module to MFLASH_m032
a. Fixes a bug that display incorrect languages about Simplified Chinese and Traditional Chinese.
b. Update multiple BIOS configuration notice.
08. Update FITC module to FITC_ME9.1_1.5M_1005_m010
a. Update ME9.1_1.5M_9.1.25.1005
09. Fix DMI type8F show MEFW version issue
10. Patch PE test random hang A2 & Asmedia SATA port can't detect device.
11. Fix when system running USB memtest86 will hang after pressing power button.
12. Update VBIOS 5.5.1035 & GOP Driver to 5.5.1031
13. Add CPU MicroCode - M2240671_FFFF0003 Intel(R) Broadwell-H Processor E-0 Stepping.
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
download: https://www.dropbox.com/s/r5kg1yr8mcj944p/E7917IMS.191.rar?dl=0

X99S GAMING 9 AC BETA UEFI Version [E7882IMS.1xx Releases]

E7882IMS.120 ===> E7882IMS.133
Changes:
1.Add solution to support M.2 Samsung XP941 (MZHPU128HCGM) device.
     Add PcieSataController_01 module.
     Update SataExpress_m003 module.
     Update 5.004_AHCI_04 module.
   2.Update GBI_m017 module.
   3.Update MemoryZ_m009 module.
   4.Fix NV Titan VGA 3Dmark issue.
   5.fix mouse scrolling function.
   6.Adjust USB s5 wakeup function.
7.Patch current CPU ratio information incorrect issue in CPU Specifications.
8.Fixed CPU Ratio keep 12x issue when resume from S3 and CPU ratio is fixed mode.
9.Add some common code and hook.
10.Fix Memory Try It item string incorrect issue when selected Memory Try It setting then
load BIOS default setting.
11.Fix watchdog function not work issue when BCLK OC fail system hang on 0xFF.
12.Fix Turbo Boost behavior abnormal issue when resume from S3.
13.Fix Adjusted Ring Frequency information incorrect issue when set CPU Ratio and set BCLK.
1.Update GBI_m018 module.
     1.Fix the wrong spelling for Unknown Vendor.
     2.Fix the wrong spelling for Keyboard.
   2.Update RomHole_m016 module.
     1.Fix don't save OcInfoPassToSetup data in OCProfile to avoid OC function fail.
   3.Update MFlash_m018 module.
     1.Fixed MSI's recovery GUID conflicted with AMI.
     2.Set a variable to notify OC to run OC default setting when updating BIOS.
     3.Changed the recovery mode from AMI's rule to MSI's rule.
     4.Modified the label name of MFlash sample code
     5.Fixed incorrect memory assignment
   4.Update ISL6388_m204 module.
     1.Modify PCIE base address related code.
   5.Update MsiOc_LituyaBay_m125 module.
     A.Modify auto adjust CPU Over Temperature Protection related code.
B.Let system run OC default setting when MFlash updating BIOS.
C.Fix Memory Try It item string incorrect issue when change to other language or load from
OC Profile.
D.Modify some item help string and add multi language string from BIOS spec 955.
E.Modify auto adjust tREFI timing related code.
   6.Update MsiOc_LituyaBay_m124 module.
     1.Patch current CPU ratio information incorrect issue in CPU Specifications.
2.Fixed CPU Ratio keep 12x issue when resume from S3 and CPU ratio is fixed mode.
3.Fixed Mem patch group can't show in setup and hide show patch memory information.
4.Add memory Chip ID support.
A.Add some common code and hook.
B.Fix Memory Try It item string incorrect issue when selected Memory Try It setting then
load BIOS default setting.
C.Correct maximum memory clock speed and configured memory clock speed in SMBIOS Type 17.
D.Modify some DRAM timing auto setting.
E.Patch memtest fail issue when use Kingston HX424C12PBK4/32 memory and XMP is enabled.
F.Fix watchdog function not work issue when BCLK OC fail system hang on 0xFF.
G.Add more option for CPU Over Temperature Protection item and show warning message if set
over 105 degree and modify item help string.
H.Fix Turbo Boost behavior abnormal issue when resume from S3.
I.Fix Adjusted Ring Frequency information incorrect issue when set CPU Ratio and set BCLK.
   7.Update NCT5605_m007 module.
     A.Fixed when EuP 2013 enable, CPU Fan can't work after S4.
     Disable NCT5605Smi_SUPPORT.
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.

E7882IMS.130 ===> E7882IMS.141
Changes:
01. Add erp 020.
   02. Modify temperature unit show error.
   03. Modify board explorer
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.

[Z77A-GD55] BETA UEFI Version [E7751IMS.1xx Releases]

E7751IMS.161 ==> E7751IMS.162
01. Update the CRB 022a Codebase.
   02. Fix TPM item enabled issue when load default after.
   03. Update the WIN8 Logo.
   04. Fix sometimes system will hang up in the shutdown process after idle it for some time.
   05. Set CPUEnergyReadEnable & CPUTempReadEnable default to disabled.
   06. Fix the PS2 KB/Mouse show yellow exclamation mark issue in OS.
   07. Fix the connect Sata HDD will reset issue when use CRB 022a.
08. Fix OC Genie setting not set to item after OC Genie function enable.
   09. Update ME8 8.1.0.1248 PV ver.
   10. Add the FastBootOption module.
   11. MFlash support Secure Flash & message blink when update BIOS/ME.
   12. Modify skip sata item string and default value.
   13. Add fast boot item show in the win8 configuration feature.
   14. Remove skip add Bgrt to acpi function when "Windows 8 Logo requirement" item disabled.
   15. Change Secure Boot item default value.
   16. MRC Fast item show only when use user password.
   17. Update Intel Ivy CPU GOP ver 3.0.13.1013.
   18. Fix SmartFan function error issue.
   19. Add amp function support.
20. Finetune G.Skill memory command rate timing.
21. Fix the issue that setting item "Command Rate" to 1t causes an unnecessary cold reset when bios was postting.
22. Fix some memory cause bios hang 0x3b or 0x4f when overclock cpu ratio to 42.
23. Update ME firmware message.
   24. Fix some PCIE card can't detect issue.
   25. Modify some WIN8 feature solution.
   26. Add Gigadevice 25Q64BSIG" SPI ROM support.
   27. Fix Classis Intrusion function fail.
   28. Improve memory performance.
   29. Update WIN8 Logo.
   30. Fix the system reset issue when windows 8 logo requirement set enabled and sata hdd set raid Mode.
   31. Fix set CsmLaunch value error issue when update CRB022a codebase.
   32. Add language: Indonesian,Thai and Vietnamese Finalize.
   33. Adjust Other PCI device ROM priority item default value.
   34. Fix using AFU3.03RC02 to Flash BIOS error.
   35. Fix TPM function fail issue.
   36. Fixed MSI keyboard ES300MU can't detect issue.
   37. Update BIOS Setup F12 key function.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

E7751IMS.163 ==> E7751IMS.164
01. Fix can not adjust cpu ratio when item "Hyper-threading" set to Disabled and item "Active Processor Cores" set to 1.
02. Adjust CPU Ratio keyin function.
03. Add win8 gop solution.
04. Patch sometimes check GOP driver in external VGA card fail when reset system.
05. Patch WinXP 32bit system would hang when installing NEC USB3.0 driver.
06. Fixed power button fail after resume from S3.
07. Update cpu Microcode M12306A9_00000015.
08. Fix windows boot manager boot sequence show error issue when load default after.
09. Fix DRAM frequency incorrect issue when use Patriot PV316G213C1K memory and XMP is enabled.
10. Support check GOP driver in external VGA card.
11. Fix some items of CPU Features form show error when load defalut.
12. Fix some item can not change value.
13. Fix Ipv6 function fail issue when update AMI CRB022a code.
14. Fix system hang on 0x55 issue when use Team Team-Elite-1866 memory.
15. Fix system hang on 0x55 issue when use SPD 800MHz memory and Sandy Bridge CPU.
16. Fix item "Internal PLL Overvoltage" always Enable when over clock cpu ratio.
17. Set item "Intel C-State" to enabled when use some special cpus (such as i5-3475s which oc ability are limited) to over clock cpu ratio to the ratio higher than the ratio 4 cores can reach at the same time.
18. Fix item "Adjust CPU Ratio" show error when adjust cpu ratio.
19. Add code for MSI Fast Boot.
20. Next boot after AC power loss run normal boot when fast boot enabled.
21. Support check GOP driver in external VGA card when fast boot enabled.
22. Modify 'Win 8 Configuration' to 'Windows 8 Configuration'.
23. Add OC Retry Counter Item.
24. Support MSI Fast Boot.
25. Fix WIN8 WHCK PCI Hardware test fail issue for Asmedia chip.
26. Update SMIFlash module 25.
27. Modify solution Fix install Infineon TPM software fail issue.
28. Fix system hang on 0x55 issue when use single side dual rank memory.
29. Fix Item "AMD Memroy Profile" can only choose "Disabled" option.
30. MSI Fast Boot item show only when use user password.
31. Fix oc profile fail.
32. Fixed PLL function enable caused set tRTL timing hang issue.
33. Fix post hang A0/A2 issue when select WIN8 Boot.
34. Remove "Press <DEL> or <F2> to enter setup." from post.
35. Fix U62 Roccat Pyra Wireless Mouse issue in bios setup.
36. Fix OEM Logo show error issue.
37. Fix Adjusted DRAM Frequency incorrect issue when XMP is enabled and set different DRAM frequency.
38. Fix Adjusted DRAM Frequency and XMP info incorrect issue when use XMP 3000 memory and if XMP 3000 profile is enabled then force run 2800.
39. Fix Item "DRAM Frequency" will be always reset to Auto when bios reset. (only occured when using sandybridge cpu)
40. Disable power button when erase/write the rom hole or set the nvram variable.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

X99S SLI PLUS BETA UEFI Version [E7885IMS.1xx Releases]

E7885IMS.120 ===> E7885IMS.134
Changes:
1.Add solution to support M.2 Samsung XP941 (MZHPU128HCGM) device.
     Add PcieSataController_01 module.
     Update SataExpress_m003 module.
     Update 5.004_AHCI_04 module.
   2.Update GBI_m017 module.
   3.Update MemoryZ_m009 module.
   4.Fix NV Titan VGA 3Dmark issue.
   5.fix mouse scrolling function.
   6.Adjust USB s5 wakeup function.
7.Patch current CPU ratio information incorrect issue in CPU Specifications.
8.Fixed CPU Ratio keep 12x issue when resume from S3 and CPU ratio is fixed mode.
9.Add some common code and hook.
10.Fix Memory Try It item string incorrect issue when selected Memory Try It setting then
load BIOS default setting.
11.Fix watchdog function not work issue when BCLK OC fail system hang on 0xFF.
12.Fix Turbo Boost behavior abnormal issue when resume from S3.
13.Fix Adjusted Ring Frequency information incorrect issue when set CPU Ratio and set BCLK.
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.

E7885IMS.130 official ===> E7885IMS.141
Changes for E7885IMS.141:
1.Add NVMe module.
   2.Update MsiGseSources_m033 module.
     1.Fix from "Save and Exit" page to boot will show "Save configuration and reset?"
     message box when first burner BIOS.
   3.Update GBI_m020 module.
     1.Add Vendor ID : Samsung and PLAXTOR.
     Add Classcode base on PCI code SPEC.
   4.Update MFlash_m021 module.
     1.Fixes OC default setting variable can not be cleaned when set BIOS ROM switch to another.
     2.Support the multi BIOS switch.
   5.Update 5.004_FixedBootOrder_04_m012 module.
     1.Fix Software Application(MMTools) can't write back.
   6.Update Golden board MsiLituyaBayCrb012_m014 module.
     1.Add Golden_Board.dec and Golden_Board.dsc.
   7.Update MSIOC MsiOc_LituyaBay_m126 module.
     A.Fix system can't boot issue when use desktop Haswell-E ES2 CPU.
B.Modify CPU Base Clock related setting when set CPU Base Clock to 125.03MHz.
C.Support OC retry function when occur unexpected reset during memory training.
D.Add Memory Try It setting and modify some option settings.
E.Patch system hang on 0xBF issue when limit overclocking system BSOD reset after run some
benchmark in OS.
F.Fix Memory Try It item string incorrect issue when load from OC Profile.
G.Modify auto adjust CPU Base Clock related code when use XMP 3200MHz memory.
H.Modify some DRAM timing auto setting.
I.Fix system always reset on 0x04 issue when install four memory and set CPU Base Clock
then change memory to other module.
J.Fix DRAM Voltage incorrect issue when set DRAM Voltage item and occur OC fail.
8.Update ISL6388_m205 module.
1.Fix read CMOS function coding error.
9.Update PV3203_m205 module.
1.Fix read CMOS function coding error.
10.Fix particular USB mouse will hang 0x9C issue.
11.Add M.2 Source Link item and modify M.2 PCH Strap help string.
   12.Support int15 CPU PCIE & PCH PCIE switch function.
   13.Update MSIOC MsiOc_LituyaBay_m127 module.
     A.Support auto adjust M.2 Source Link related code when set CPU Base Clock item.
B.Modify some DRAM timing auto setting.
C.Fix current DRAM CH_A/B Voltage incorrect issue when DRAM CH_A/B Voltage item is auto and
have adjust DRAM CH_C/D Voltage item.
   14.Fix Ghost speed too low.
   15.Fix CM Reaper USB mouse hang post 9C.
This Bios use is done solely at your risk!
To flash:
>>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB
G.) Now follow the directions and let the tool flash
H.) After flashing reinstall ME drivers in Windows: http://download.msi.com/dvr_exe/intel_me10_mb.zip

[Z97M GAMING] BETA UEFI Version [E7919IMS.1xx Releases]

E7919IMS.110 ===> E7919IMS.121
Changes:
01. Update code base to 4.6.5.4_VEB_1ARYX010
02. Update MsiOc - SharkBay module to MsiOc_SharkBay_m189
& MsiOc - CrescentBay Private module to MsiOc_CrescentBay_Private_m126
a. Fix compile error when update to RC 1.3.0.
b. Fix can't adjust CPU Ratio in OS issue when use G3258 CPU and CPU Ratio item is Auto.
c. Fix VR 12VIN OCP Expander function not work issue on 9 series model.
d. Modify OC Button function CPU ratio related code.
e. Update private file to CrescentBay Codebase 010 Intel RC 1.3.0.
03. Update MSI XTU - CrescentBay Private module to MSI_XTU_CrescentBay_Private_m109
a. Update private file to CrescentBay Codebase 010 Intel RC 1.3.0.
b. Update golden board modify code to private file.
04. Update GSEII CrescentBay Private module to GSEII_CrescentBay_Private_m005
a. Update CRB core base to 1ARYX010
05. Update CPU MicroCode - M32306C3_0000001A(Intel(R) Haswell Processor C-0).
06. Patch system can't boot legacy OS when plug Samsung PCIE M.2
07. Patch PS2 device detect time when "MSI Fast Boot" enabled.
08. Update GBI module to GBI_m030
a. Fix Board Explorer can NOT show USB information after rebooting from OS
b. Fix Board Explorer will show wrong information
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.

E7919IMS.110 ===> E7919IMS.121
Changes:
01. Update code base to 4.6.5.4_VEB_1ARYX010
02. Update MsiOc - SharkBay module to MsiOc_SharkBay_m189
& MsiOc - CrescentBay Private module to MsiOc_CrescentBay_Private_m126
a. Fix compile error when update to RC 1.3.0.
b. Fix can't adjust CPU Ratio in OS issue when use G3258 CPU and CPU Ratio item is Auto.
c. Fix VR 12VIN OCP Expander function not work issue on 9 series model.
d. Modify OC Button function CPU ratio related code.
e. Update private file to CrescentBay Codebase 010 Intel RC 1.3.0.
03. Update MSI XTU - CrescentBay Private module to MSI_XTU_CrescentBay_Private_m109
a. Update private file to CrescentBay Codebase 010 Intel RC 1.3.0.
b. Update golden board modify code to private file.
04. Update GSEII CrescentBay Private module to GSEII_CrescentBay_Private_m005
a. Update CRB core base to 1ARYX010
05. Update CPU MicroCode - M32306C3_0000001A(Intel(R) Haswell Processor C-0).
06. Patch system can't boot legacy OS when plug Samsung PCIE M.2
07. Patch PS2 device detect time when "MSI Fast Boot" enabled.
08. Update GBI module to GBI_m030
a. Fix Board Explorer can NOT show USB information after rebooting from OS
b. Fix Board Explorer will show wrong information
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.

X99S XPOWER AC BETA UEFI Version [E7881IMS.1xx Releases]

E7881IMS.120 ===> E7881IMS.132
Changes:
1.Add solution to support M.2 Samsung XP941 (MZHPU128HCGM) device.
     Add PcieSataController_01 module.
     Update SataExpress_m003 module.
     Update 5.004_AHCI_04 module.
   2.Update GBI_m017 module.
   3.Update MemoryZ_m009 module.
   4.Fix NV Titan VGA 3Dmark issue.
   5.fix mouse scrolling function.
   6.Adjust USB s5 wakeup function.
7.Patch current CPU ratio information incorrect issue in CPU Specifications.
8.Fixed CPU Ratio keep 12x issue when resume from S3 and CPU ratio is fixed mode.
9.Add some common code and hook.
10.Fix Memory Try It item string incorrect issue when selected Memory Try It setting then
load BIOS default setting.
11.Fix watchdog function not work issue when BCLK OC fail system hang on 0xFF.
12.Fix Turbo Boost behavior abnormal issue when resume from S3.
13.Fix Adjusted Ring Frequency information incorrect issue when set CPU Ratio and set BCLK.
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.

E7881IMS.120 ===> E7881IMS.132
Changes:
1.Add solution to support M.2 Samsung XP941 (MZHPU128HCGM) device.
     Add PcieSataController_01 module.
     Update SataExpress_m003 module.
     Update 5.004_AHCI_04 module.
   2.Update GBI_m017 module.
   3.Update MemoryZ_m009 module.
   4.Fix NV Titan VGA 3Dmark issue.
   5.fix mouse scrolling function.
   6.Adjust USB s5 wakeup function.
7.Patch current CPU ratio information incorrect issue in CPU Specifications.
8.Fixed CPU Ratio keep 12x issue when resume from S3 and CPU ratio is fixed mode.
9.Add some common code and hook.
10.Fix Memory Try It item string incorrect issue when selected Memory Try It setting then
load BIOS default setting.
11.Fix watchdog function not work issue when BCLK OC fail system hang on 0xFF.
12.Fix Turbo Boost behavior abnormal issue when resume from S3.
13.Fix Adjusted Ring Frequency information incorrect issue when set CPU Ratio and set BCLK.
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.

P67A-GD65/P67A-GD55/P67A-GD53 Beta UEFI Bios [E7681IMS.4xx]

This has bricked my board. Now what?
My board is P67-GD53 b3.

My first plan(?) is,
I am waiting arrival of air blow soldering rework station.
As soon as I receive, I will replace preprogrammed 4.37 BIOS chip.
I ordered two, but first I will replace PRIMARY one and try it.
If problem to update SECONDARY, I will replace SECONDARY with preprogrammed one.
My second plan is,
1. Waiting arrival of SPI programmer and SOP8 to DIP8 adapter.
2. Waiting arrival of 10 Macronix MX25L6445EM2I-10G1 BIOS chip.
3. Learn how to Program to the BIOS chip with SPI programmer, it's easier than expected.
I am engagaed in PLC & Inverter for commercial dry cleaning machine.
To support my customer, I will continuously using Windows 7x64 for Omron and Yaskawa, XPx32 for Mitsubishi with multibooting.
That's why I should keep Two P67A-GD65 Desktop and Two Lenovo E520 Laptop in good working condition.
One is main use and other one is just backup.
The reason is Windows 8 PC has some restriction to install other OS, because of Secure Boot.
That's it.
PS: The official 4.20 BIOS is just BETA level BIOS.
I have PC experience during PC-XT, before PC I used NEC5200/05 PTOS(Personal Technology Oriented System).
I never had problem with BIOS flash with MSDOS, it was successful, but boot failure.

[Z77 MPOWER] BETA UEFI Version [E7751IMS.Hxx Releases]

E7751IMS.H45 ==> E7751IMS.H47
01.Fix issue:Wakeup from S4 failed under Windows7 UEFI mode if you set Administrator password and set the Password check to ¡°BOOT¡±.
01. Fixed "Output Select"item can not working correct.
02. Remove "Press <DEL> or <F2> to enter setup." from post.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

E7751IMS.H62 ==> E7751IMS.H64
01. Fix WIN7 64 Bit OS S4 resume fail issue when BIOS Setup install password and password check set boot mode.
02. Add "Hardware Prefetcher" item and "Adjacent Cache Line Prefetch" item in CPU Features group.
03. Add the usb setup item and usbpolicyprotocol to enable or disable the usb mass storage driver.
04. Fix USB mouse cannot be use under UEFI bios setup issue if you plug the mouse after booting up the system.
05. Add to switch T1,T2 orT3 Mode To Thermistor for fintek.
06. Modify BIOS Setup USB Support item.
07. Add VGA hot-plug solution.
01. Fix the issue that hot plug usb device will clear screeen when cpu memory changed OR oc fail message appear.
02. Fix 'OC Retry Count' Function issue for BCLK OC.
03. Fix VGA N650-1GB5(V280-05S & V280-10S) hang issue.
04. Patch Fast Boot "SATA Device Support" disable function fail.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

[X79MA-GD45 & X79MA-SD40 (MS-7738 v1.0)] BETA UEFI/BIOS Releases [E7738IMS.1xx ]

E7738IMS.172 ==> E7738IMS.173
1.Support CPU ratio keyin function.
2.X79 support MRC cold boot fast function.
3.If plug 2 different XMP dram, auto gray XMP item.
4.Fix system can be wakeup from S4/S5 by PS2 keyboard when "Resume From S3/S4/S5 by PS2 Mouse" is set to enable and "Resume From S3/S4/S5 by PS2 keyboard" is set to disable.(vice versa)
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

E7676IMS.163 --> E7676IMS.164
* Adjust Lowest GT Ratio for different CPU.
* Fix OC menu can't select down(when OC Genie Button Operation Enabled).
* Fixed clear CMOS POST1 CPU Speed:0*31=0MHz.
* Fixed Intel SNB Q0 CPU (Q1CX/QAQC) can't boot & S3/S4 fail.
E7676IMS.164 --> E7676IMS.165
* Update Memory Initialize Reference Code to version:1.2.2.00
* Add U-key function support USB3.0
* Fix the issue when Onboard LAN controller is set to Disabled then PCI LAN option rom does not appear under DOS mode.
* Hide the item "Super IO Chip".
E7676IMS.165 --> E7676IMS.166
* Remove USB3.0 Legacy Mode Support item.
* Fix Resume From S3/S4/S5 by PS/2 Mouse/KB issue.
E7676IMS.166 --> E7676IMS.160
* Release MP BIOS.
E7676IMS.160 --> E7676IMS.171
* Fixed with Intel RAID mode built in HDD larger than 2.2TB can't finish Win7 installation issue.
* Fixed UKEY compatible issue.
E7676IMS.171 --> E7676IMS.172
* Fixed default DRAM voltage incorrect issue when used low voltage memory.
* In order to unify the spec, Change String "CPU Min.Fan Speed(%)" to "CPU Min.Fan Speed" and change its values(ex: 62.5 -> 62.5%).
* Remove extra Solution for Fixed with Intel RAID mode built in HDD larger than 2.2TB can't finish Win7 installation issue.
* CPU ratio shows 60/61/62/63 in BIOS info area, if "Adjust CPU ratio in OS" is enabled.
E7676IMS.172 --> E7676IMS.173
* Fix factory INT15 tool test Hang issue.
* Fixed the BIOS Setup Green Power group volt information show N/A issue when use User Password.
* Fixed OS device manager USB 3.0 device show yellow exclamation point when disable USB controller item.
* Fixed the motherboard needs clear cmos after just can normal boot when under the S3 mode and turn off the Power.
* Fixed the pcie gen2 speed change to pcie gen1 issue when the S3 resume after.
Please note that flashing this release occurs entirely at your own risk! >>>Use the MSI HQ Forum USB Flasher<<<
Do Not use the BIOS/UEFI integrated M-Flash Routine.

[H61M-P20/ S20 (G3) Beta UEFI Bios [E7788IMS.1xx Releases]

Similar Messages

Maybe you are looking for