Hai l how to find weather our infopackage is used in any infopackage group?

hai is there any way to find out weather our infopackage is used in any infopackage group.Help is appreciated.
Thanks,
Mark.

Hi Steve,
go to RSMON Transaction there you can find all the infopackage groups and there you can check whether your infopackage is present there or not.
and also if it is included in any infopackage group or any process chain you can find the option like "infopackage is included in the infopackage group or process chain" in the schedule tab.
Hope its clear.
assign points if its helpful....
Regards,
ashok

Similar Messages

How to find weather our cube has indexes or not.

Hi is there any table to findout weather any indexes has been created on CUBES,Infoobjects,ODS.If there is no table any easy method to find them manuallly??? Who ever answers this questions will be rewarded handsomely

Hi Steve,
there are somany ways to find this.go to inofcube right click and fo to performance tab and check whether the tick mark is there on create index then if its present you can confirm that batch indexes are present for this infocube.
Right click on that cube and select manage--> performance tab -->u can click on check option for index, if it turns red no index , u create index there only by selectin create index option.
other way is go to SE11 and give your fact table name like /BIC/F<INFOCUBE NAME>and display and there at the right most top you can find one option like indexes click on this you can see which indexes are using by the cube and its of which type.
hope its clear,
assign points if it helps..
Regards,
ashok
Message was edited by:
ashok j

HT202213 I have 3 users on one computer with 3 unique user accounts. Each have unique ITunes accounts. How do we share our music libraries using home sharing?

I have 3 users on one computer with 3 unique user accounts. Each of us have separate and unique ITunes accounts. How do we share our music libraries using Home Sharing? Everything that I can find talks about sharing between networked computers, but this is all on the same computer. I just want to share between ITunes accounts. Thanks!

Hi b noir, I also have two users on one pc with two different iTunes libraries. But I also want to put them onto an external hard drive so that I can free up some memory on the pc. So I figure I need to consolidate the two users iTunes libraries first before moving to hard drive? But not quite sure how to do that on the iTunes 11? Thanking you in advance!!

How to find out which keywords were used to create a smart album?

Hi,
I actually have 2 questions;
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Thanks guys,
Raphael
<Edited by Host>

b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Raphael,
that message may occur for four reasons at least:
Most frequently, when you are using an outdated link to a post that no longer exists, for example from an email notofication. Sometimes our community host will remove posts, that are in violation of the terms of use: see:
Apple Support Communities Terms of Use
Or you are using the edit button or a bookmark to an "Edit" window, after the fifteen minutes allowed for editing are up.
Or you want to view a page in a restricted section of the ASC - soem perta are only open for members of level 6 or higher.
Or it is one of the unexplained problems with the forum software right now.
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
I really like Kirby's suggestion with the IPTC rule Keyword is. This is very useful for smart albums global to the library.
Frequently a different approach helps for my smart albums. Many of my smart albums are local to projects or folders. In this case the smart HUD will only show those keywords that have been used for the images in the selection. So if I only have tagged the images with the keywords "birds" and "slideshow", the smart settings HUD will only show these two keywords and the list is very short.
My Keywords HUD, is organized hierarchically; this way I can collapse large sections at once, and it is easier to focus on the keywords needed for a specific task.
I use the search field in HUD a lot, to filter the set of keywords shown.

How to find a customer who does not have any activity in the last 5 years

HI all,
How to find a customer who does not have any activity in the last 5 years.
Thanks & Regards,
Moderator message: not directly related to ABAP development, please have a look in the respective functional forum.
Edited by: Thomas Zloch on Jan 3, 2011 2:20 PM

Post Author: tzinser
CA Forum: Formula
Okay, I left off a lot of important information...
I'm using two tables
TWDATA
EVENT
From TWDATA I'm pulling the fields TWDATA.OrderNumber and TWDATA.DisbursementDate
From EVENT I'm pulling the fields EVENT.EventCode and EVENT.CompletedDate
The two tables are linked by OrderNumber.

We have a large family, 5 kids and two adults all with iPads, iPhones, Mac Books, Servers.... How can we combine our purchases to use on all our devices. We have two Apple ID's and sometimes buy multiple copies because of how we are limited...

We have a large family, 5 kids and two adults all with iPads, iPhones, Mac Books, Servers.... How can we combine our purchases to use on all our devices. We have two Apple ID's and sometimes buy multiple copies because of how we are limited...

Hello Halfback71,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Frequently asked questions about Apple ID
http://support.apple.com/kb/ht5622
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
Best of luck,
Mario

How to find out names of reports using a particular view

hi guys,
i am newbie here, i jsut want to know how to find out which reports are using a particular view
many thanks in advance for your help

If you go to the Properties for the Folder in Discoverer Administrator, there is a Dependents tab that should list any workbooks using the folder. This only works for workbooks saved to the database, so won't help with any created using Discoverer Desktop. If you are gathering statistics and have the The Discoverer V5 EUL business area and its workbooks installed, it can tell you about Folders Used as well. It contains information about queries run whether the workbook is saved to the database or to the file system, but wouldn't contain inforamation about workbooks that had been created but not run.

How to find out if I am using a 32 bits or 64 bits version of JRE?

How to find out if I am using a 32 bits or 64 bits version of JRE?
If I have 2 instances of Java installed in 2 seperate directories, one 32 bits and other 64 bits on Linux. How do I identify which directory holds which version?
Is there any command that can output this info?
Regards,
Billamama

With a Sun JDK or JRE, you can use java -version:
$ java -version
java version "1.6.0"
Java(TM) SE Runtime Environment (build 1.6.0-b105)
Java HotSpot(TM) Server VM (build 1.6.0-b105, mixed mode)
... switch to the 64-bit JDK ...
$ java -version
java version "1.6.0"
Java(TM) SE Runtime Environment (build 1.6.0-b105)
Java HotSpot(TM) 64-Bit Server VM (build 1.6.0-b105, mixed mode)
The last line says "64-Bit."

In DBI , how to find out the Source Query used for the Report

Hi All,
How to find out the Source Query used to display the data in the DBI Reports or Dashboards. We can get it in Apps Front end by Going to Help and Record Histroty. But DBI Runs in Internet Explorer so i dont know how to get the source query ( SELECT Query ) Used.
In IE we have View --> Source . But that does not help since it gives the HTML Coding and not the SELECT Query used.
If anyone has ever worked on it...Please help me in finding it.
Thanks,
Neeraj Shrivastava

Hi neeraj,
You can see the query used to display reports.Follow these steps to get the query.
1)Login to oracle apps
2)Select "Daily Business Intelligence Administrator" responsiblity.
3)Now click on "Enable/Disable Debugging" (Now u enabled debugging)
4)now open the report which you want to see the query of
5)In view source it displays query along with the bind varilables.
Feel free to ping me if you have any doubts
thanks
kittu

HT1338 Can anyone tell me how to find what OS I'm using on the Mac? Tiger or Leopard? Also, how do I update from 10.6.8 to the latest version?

Can anyone tell me how to find what OS I'm using on the Mac?
Tiger or Leopard?
Also, how do I update from 10.6.8 to the latest version?

Go to the Apple menu and select "About This Mac". You will get a window similar to this one -
You current OS X version number will be shown as I've marked.
OS X 10.4.x is Tiger, 10.5.x is Leopard, 10.6.x is Snow Leopard, 10.7.x is Lion, and 10.8.x is Mountain Lion.
Whether or not you can go to the latest OS X version depends upon your hardware -
You will need to purchase the retail set for the OS X version you want; there is no pint in getting and installing any intermediate versions. Once the retail version has been installed, you can update it to the latest release for that version via download updater.

How to find the columns and tables used in a stored procedure?

Hi,
Can someone suggest how to find the columns and tables used within a stored procedure?
Thanks
VBK

For example:
SQL> create or replace
2    procedure p1
3      is
4          cnt number;
5      begin
6          select count(*) into cnt from emp;
7 end;
8 /
Procedure created.
SQL> select referenced_owner,
2          referenced_name
3    from dba_dependencies
4    where owner = 'SCOTT'
5      and name = 'P1'
6      and referenced_type = 'TABLE'
7 /
REFERENCED_OWNER               REFERENCED_NAME
SCOTT                          EMP
SQL> SY.

How to find out sender query by using receiver query in RRI

Hi,
I have do some assignment settings .I know receiver query name ,but i don't know sender query name .
please suggest me how to find out sender query name .
is there any table /t-code ?
Thanks,
EDK.....

Hello,
If the receiver query is web report, then goto table RSBBSQUERY and in RONAM field put the web report name.
You will get the sender query UID in the field ELTUID.
Now take this UID and goto table RSRREPDIR and put this UID in COMPUID and you will get the query name.
If the reciever query is bex query then get the UUID as above from RSRREPDIR by providin the tech name and then go to table RSBBSQUERY to get the UID of the sender query.
Regards
Shashank

How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?

Hi there,
How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
Thanks.

You need to enable auditing on SharePoint server and it will let you know, if someone makes any critical changes for the same.
Please walk through this informative KB to enable auditing on SharePoint :https://support.office.com/en-za/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
Here is one more resource :
https://support.office.com/en-in/article/View-audit-log-reports-4293e8d5-4e7d-4201-b8ac-c8e63a100131
Moreover, if you wish to audit such critical changes automatically, you may consider on this comprehensive application (http://www.sharepointauditing.com/) that helps to track every changes on SharePoint into
real time and provides the captured data at granular level.

How to find out the Idoc number triggered for any material transfer frm SAP

Hi Folks,
Can any body let me know How to find out the Idoc number triggered for any material transfer frm SAP?
Do we have any navigation for that in MM03?
Thanks,
SPMD.

Hi Shabbirmdpasha,
If you know the user name then you can find the idoc numbers created by that user. But the problem here is it not only gives the material it gives all the idocs created by that user. Go to SE16 --> table name EDIDS --> here you can fill the approximate date and in UNAME give the userid and execute. This will give all the idocs created by that user. I know it is only a partial solution.
Also would suggest to post the same in abap forums for more answers:
ABAP Development
Regards,
---Satish

How to find a perticular t.codse used in last 6 months

Hi All,
can anyone let us know how to find a perticular t.codse used in last 6 months.
Regards!!

Hi,
Its all depends on the settings has done for transaction ST03N.
If it has explicitly set to last 6 months then you can find in the left hand side transaction profile coloumn of ST03N.
If not you can set it by the following way:
ST03N>goto collector and perfomrance DB>monitoring database-->Reorganisation
Thank you,
Tilak

Hai l how to find weather our infopackage is used in any infopackage group?

Similar Messages

Maybe you are looking for