Hamachi turns off on 3G or degraded DSL connections
We Use Hamachi to allow us to remote control unattended windows XP machines in remote locations but we find that after a few days Hamachi gets turned off and is therefor no longer on the Hamachi network and we have to drive out and manually turn on the GUI to get it back on. We only have seen this issue on 3G connected machines and on a machine where the ADSL connection is poor. Is there a setting that will avoid this happening or is this a feature?
Hi
No we had no response so have gone to neorouter and it works fine, interestingly it is only recent installations that are effected by this. Such a shame as it was a great solution when it worked.
Similar Messages
-
iphone is not being recognized in itunes. Turned off phone, rebooted pc, checked all connections. Still no itunes recognition. What should I do?
Just received from Verizon.Sorry, didn't notice that you were using OS X. Here's the troubleshooting steps for a mac:
http://support.apple.com/kb/TS1591. If this doesn't work, try reinstalling the Apple Mobile Device Service as described here: http://support.apple.com/kb/ht1747. -
How to turn off screen on Macbook Air when connected to Computer LeD monitor?
How to turn off screen on Macbook Air when connected to Led monitor screen?
The only way you can turn it off is to close the lid - so you would need an external wired or wireless keyboard and mouse/trackpad attached.
Matt -
Grandkids set up ipad2 for grandma. Passcode forgotten and never used again. The ipad was never turned off, and was never synced or connected to main PC. No iTunes installed on PC. Yesterday while visiting with owner, I downloaded an app for her. It installed and restarted the ipad. Passcode is now needed. What to do?
If Find my iPad was never set up then scroll down & follow the directions under Recovery Mode:
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
If it was and the activation lock is triggered, then you will need to know the original Apple ID & password that her grandkids used to set it up or have them sign into iCloud & remove the device from Find My iPad before you can Restore it.
iCloud: Activation Lock
Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support -
my iphone is not working only turn on and turn off logo is showing. its not connecting to itunes in my laptop also. wht shall i do with tht now.
need ans plzzzz
-
tried upgrading to ios7 then said i didnt have enough storage so attempted to delete apps in usage and turned my icloud on, now iphone wont leave the settings app. cant turn off or return to home. tried connecting to itunes and no change. help!
You need to reset the phone, but that requires a functioning on/off (lock) button. Time to visit Apple.
-
HT203260 How do I turn off headphones setting when headphones not connected?
How do I turn off headphone setting when headphones not connected?
Go to Settings > Notifications > Messages > Show Preview ON/OFF
-
How do I turn off iTunes genius without having Internet connection?
How do I turn off iTunes genius without having Internet connection? When I go to the iTunes menu select store, the drop-down box has "Turn Off Genius" grayed out. I had Internet service when I started/activated my iTunes genius. But now, I stopped my Internet service and I cannot deactivate/stop the iTunes genius from trying to access the iTunes Store. Is there a way to turn this function off!? Any help would do. I have iTunes 10.7(21) 64 bit
thanksInternet access required to authorize.
-
Can I turn off my MacBook Pro screen when connected to an external monitor?
I have my 13' MacBook Pro connected an external Samsung monitor, is it possible to have the laptop screen turned off so that it is only displayed on the monitor screen?
This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.
-
Turning off MBP Display when Cinema Display connected
Hello,
Sorry if this is a stupid question but I have a 23" Cinema Display attached to my MBP via DVI and although it's great to watch DVDs on, I would like to turn off my MBP display whilst doing this to save energy, reduce the distraction etc - is there a way of doing this?
Help appreciated.You'd need an external keyboard and mouse as well. Follow these steps:
http://support.apple.com/kb/HT3131
Alternatively, there are haxies that disable lid-closed sleep:
SleepLess: http://www.alxsoft.com/mac/sleepless.html
InsomniaX: http://semaja2.net/insomniaxinfo/ (not sure if this works in 10.5) -
Why does my nano keep turning off and on when it is connected to my computer?
When i connect my nano to my computer the nano says that it is connected and nothing happens in Itunes. Then when the nano keeps turning off and on while it is plugged into my computer. What can i do to make itunes recognize my nano so i can add new music?
Please try the following:
Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.) -
my phone is blank, its an iphone 4, its been just vibrating for the last two hours non stop, its unresponsive to turning on or off, or even being connected to my lap top. my lap top doesnt recognise the usb...very confused.
Try a hard reset. Hold the power and the home button down at the same time untill you see the apple logo appear. then let go of the buttons
-
My phone shows the apple logo and doesn't turn off or on. this occured after connecting to itunes
connected to itunes...phone no longer works...displays apple. how do i get my phone working again
Try resetting your iPhone. Press and hold the sleep/wake button and the home button for 10-15 seconds until the Apple logo appears, ignore the red slider. Then turn back on. You will not lose any data by doing this.
-
I have an I pad2 and an Epsom printer I have printed off things before on my printer but since moving it and having to switching it off my printer will not recognise my I pad I have tried putting in my security key but half way through doing this the message comes on to the error message saying printer recognised but I cannot get it to print help please
I have done this but it still didnt work but thanks
-
could i get some help about the apple logo blinking on and off ..??
Your phone is damaged. Take it in to an Apple store for evaluation and possible out of warranty replacement.
Maybe you are looking for
-
Hi all, I am seaching for Driver program for FORM16 SMART FORM .There is one driver program for sap script , for smart form J_1IEWT_CERT IS there any driver program . Can any one please guide me how to proceed? thanks in advance. Regards, suresh.
-
SAP Standard report on Goods Movement
I am looking for a report that will give me all goods movements documents (eg goods receipt & issue) that a pecific user did on a specific date. Thank you.
-
How to create software request form using Info path functionality?
Hi All, i am trying to create a Software Request Form using Info path functionality. Following are the steps: 1. Users will fill out the form with all necessary fields. 2. once they click on Submit button, it will send an email to two specific groups
-
Synchronous Java Proxy Server template - filling reponse message elements
Hi ! I'm writing a java proxy server for a synchronous interface. I'm somehow new in java...and I don't know how should I create elements for my response message inside the java method used to process the request message. The response message format
-
Hi Team, We are sending data daily to data base table by using infospoke from the DSO with delta update. Now I want to load specific billing document numbers to that data base table by using infospoke. I want to load required billing document numbers