HANA Housekeeping

Hello Experts
We are running standalone HANA Application on a 244GB cloud based server.
After we use it for sometime say one week or so, the performance is going down and system response is getting slow. After a restart the HANA system performance is back to normal. HANA DB is on Rev 73. Is there any housekeeping jobs that I need to carry on regular basis to keep the performance of my system Consistent with out restarting oftenly.
Please share your thoughts on this issue.
Thanks
Srikar

Can you please put in the studio screenshot at the time of the issue occurrence and not the dbacockpit.
since its a standalone hana environment we need to have a look at the memory usage and bottlenecks if there are any , have you searched marketplace for any notes related to rev 73.

Similar Messages

How to Create a Table with Merge and partitions in HANA

Hi,
What is the best way to create a Table with MERGE and PARTITION and UNLOAD PRIORITIES.
Any body can you please give me some examples.
Regards,
Deva

Ok,
1) the UNLOAD PRIORITY has nothing to do with the order of data loads in your ETL process
2) Unloading of columns will happen automatically. Don't specify anything specific for the tables, then SAP HANA will take care about it
3) Not sure where you get your ideas from, but there is no need to manually "flush" tables or anything like that. SAP HANA will take care of memory housekeeping.
4) Partitioning and how to specify it for tables has been largely documented. Just read up on it.
5) Delta Merge will happen automatically, as long as you don't prevent it (e.g. by trying to outsmart the mergedog rules)
Seriously, I get the impressions that this list of requirements is based on some hear-say and lack of actual information and experience with SAP HANA. There are a couple of extensive discussions on data loading optimization available here in SCN and on SAPHANA.COM. Please read those first.
All this had been discussed broadly a couple of times.
- Lars

SAP BW IDES on HANA Size

Please can someone let me know what is the minimum / recommended size of BW IDES server (RAM, CPU and Hard-drive) with HANA. I have checked SAP note on sizing but cannot figure out how do we calculate the size.
I would need size in following cases
a) Assuming nascent state with say just the Business Content of FICO, SD and some other areas installed, say about 100 cubes etc.
b) Size increase for each 100 million records loaded from source. Assume 30 fields each with 10 Bytes.
(I can do 10010^630*10), but should this change (because of column store)
Thanks in advance.
Edited by: Anand Gupta on Jan 27, 2012 10:55 PM
Edited by: Anand Gupta on Jan 27, 2012 11:11 PM

Ferry, I think the correct note is 1637145 according to which
A cleansed BW system usually has about 60 GB of database tables that will be
stored in row store (data dictionary, housekeeping tables, etc.).
u2022 Average compression factor database table size : row store size = 1.5 : 1
 A fixed amount of 40 GB for row store data for BW is assumed.
u2022 HANA uses additional caches to accelerate I/O to persistence layer and for other
purposes. These caches can grow but will shrink if memory is needed to store
data. However, a minimum amount of cache memory of 40 GB has been
identified.
u2022 Additional HANA components (statistics server, name server) require 10 GB of
memory.
u2022 Sum of memory not covered by column store: 90 GB
So I am a bit confused about your conclusions because it clearly speaks in terms of 60GB for dd and housekeeping alone.

SAP BW on HANA Migration for Process , Bex Queries and system Copy

Hi All ,
Can you please let me know the steps for migrating Process chains , BW queries and System copy for BW on HANA .
If you have examples from real time scenarios it would be good .
Thanks in advance

Hi,
for Systemcopies see also - SAP First Guidance - BW Housekeeping and BW-PCA
for the overall process - SAP First Guidance - Migration BW on HANA using the DMO option in SUM
Best Regards Roland

Error while creating a BO Universe (using IDT) on top of SAP HANA Calculation View with Input Parameters

Hi All..
We are trying to create a Universe (using IDT-Version4.0) on top of the HANA Calculation view. The Calculation view has 4 input parameters, So
in Universe side we have created the respective prompts. For the creation of derived table we have used the following code
SELECT *
FROM "_SYS_BIC"."<schema_name>.<CV_Calculation_View_test>"
'PLACEHOLDER'=('$$IP_A$$','@Prompt(A)'),
'PLACEHOLDER'=('$$IP_B$$','@Prompt(B)'),
'PLACEHOLDER'=('$$IP_C$$','@Prompt(C)'),
'PLACEHOLDER'=('$$IP_D$$','@Prompt(D)')
While validating the above code we are getting an error.
I have attached the snapshot of that error for your reference. Please find the attachment and help me in resolving it.
Thanks in advance.

Hello George,
I don't have any personalization set on the info space. Also I am using mapped Account in BI to connect to HANA. The confusing part is that it is able to validate the infospace with the input parameters and index it. However query does not return any results. I even tried running the same query which explorer sends to HANA in the SQL editor and there too the same results,the query does not return anything. The model does return data when I do a data preview and if accessed from other tools like AAO.
Also when I use SSO connection to HANA, indexing of the infospace fails. Where can I see the error log?
Thanks,

Creation of Universe based on Hana OLAP connection

I have to create a universe in IDT 4.1 sp2 based on SAP HANA OLAP
connection ?
How can i access SAP HANA view which was created using OLAP connection in Business objects Explorer? It does not allow creating Universe on top of SAP HANA OLAP connection and gives an error
SAP Business Objects query and reporting applications can directly connect to OLAP SAP HANA connections. No universe is required, only a published OLAP SAP HANA connection.
Thanks

Hi Jyothy,
Refer the below link on how to create universe on Analytic View/Calculation View using relation connection in IDT
http://www.sapanalyticsguru.com/index.php/sap-bobi/31-universe-creation-on-hana-view-using-information-design-tool

Adding BW Modelling plugins in HANA Studio

Hello Experts,
I installed SAP HANA Studio in my local machine (outside C:Program Files, i.e in D Drive)
I followed 2 options to install BW Modelling Tools Plugin, both have been unsuccessful. Can some one please let me know what is missing.
I checked the pre-requisites mentioned in the installation document (http://help.sap.com/download/netweaver/bwmt/SAP_BW_Modeling_Tools_Installation_Guide_en.pdf) and my system has all the necessary ones.
Option 1
- Followed the instructions mentioned in the https://tools.hana.ondemand.com/
- HANA Studio --> Help --> Install New Software --> Provide the link https://tools.hana.ondemand.com/luna
- I get the below error
Unable to connect to repository https://tools.hana.ondemand.com/luna/content.xml
Connection to https://tools.hana.ondemand.com refused
Option 2
- Download latest patch from Service market place
- HANA Studio --> Help --> Install New Software --> Provide the Archive path
- Error message I get is below,
Missing requirement: BW Core UI 1.6.3 (com.sap.bw.core.ui 1.6.3) requires 'bundle com.sap.adt.destinations.ui 2.18.0' but it could not be found
Cannot satisfy dependency:
    From: BW DataStore UI 1.6.3 (com.sap.bw.datastore.ui 1.6.3)
    To: bundle com.sap.bw.core.ui 1.1.0
Cannot satisfy dependency:
    From: BW DataStore Object 1.6.3 (com.sap.bw.feature.adso.feature.group 1.6.3)
    To: com.sap.bw.datastore.ui [1.6.3]
Thanks for providing some hints.
Regards,
Srinivas

If SAP could provide the HANA tools over just http:// instead of https:// then it would work under proxy conditions with the network connectivity option in eclipse set to "native" mode

Install Software HANA unable to read repository

Hello,
I'm new to Eclipse. I'm trying to get up the trial Cloud environment for SAP HANA. I have Eclipse Juno installed. When I attempt to do an install of the HANA software on top of Eclipse I receive error "Unable to read Repository".
We do not use a proxy, so network was set to "DIRECT". I can get to the SAP site from the browser tools.hana.ondemand.com/luna. I downloaded the certificate for that site and added it to the cacerts file for JDK1.6.0_45.
The error message in full says:
Unable to read repository at tools.hana.ondemand.com/luna/content.xml.
Using the browser, tools.hana.ondemand.com/luna/content.xml returns a 404 error. If I change it to tools.hana.ondemand.com/luna/content.jar, it gives me a download.
As far as I can tell, there's no way to make Eclipse point to content.jar. Can someone tell me where this is going wrong?
Thanks.
Danny Hearn

On 06/26/2015 08:52 AM, Danny Hearn wrote:
> Hello,
>
> I'm new to Eclipse. I'm trying to get up the trial Cloud environment
> for SAP HANA. I have Eclipse Juno installed. When I attempt to do an
> install of the HANA software on top of Eclipse I receive error "Unable
> to read Repository".
> We do not use a proxy, so network was set to "DIRECT". I can get to the
> SAP site from the browser tools.hana.ondemand.com/luna. I downloaded
> the certificate for that site and added it to the cacerts file for
> JDK1.6.0_45.
>
> The error message in full says:
> Unable to read repository at tools.hana.ondemand.com/luna/content.xml.
>
> Using the browser, tools.hana.ondemand.com/luna/content.xml returns a
> 404 error. If I change it to tools.hana.ondemand.com/luna/content.jar,
> it gives me a download.
> As far as I can tell, there's no way to make Eclipse point to
> content.jar. Can someone tell me where this is going wrong?
>
> Thanks.
>
> Danny Hearn
Likely the best support for SAP/HANA would come from SAP/HANA.

Can not access data generator in HANA SHINE Content

Hi Expert,
After import Delivey Unit of SHINE Content, then i was told by the Guide Book that i could use data generator to generate demo data by access URL
http://<myServer>:<XS Port>/sap/hana/democontent/epm/admin/ui/WebContent/admin.html
STEP1:I used SYSTEM on the HANA login page
STEP2:Error 404 refelect
Does anyone else have encountered this problem?
Message was edited by: Tom Flanagan

You might check the repository browser, but I don't believe that URL is correct. There is no ui or WebContent folder in the path in my system. Its just /sap/hana/democontent/epm/admin/
But I suggest checking the folder structure in the Repositories view in your own system to make sure. My system is a new version and could be different than what you are seeing. However this would explain why you are getting the 404.
Also make sure that SYSTEM has the necessary SHINE admin role added.

Open HUB ( SAP BW ) to SAP HANA through DB Connection data loading , Delete data from table option is not working Please help any one from this forum

Issue:
I have SAP BW system and SAP HANA System
SAP BW to SAP HANA connecting through a DB Connection (named HANA)
Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
Executed the Open Hub service without checking DELETING Data from table option
Data loaded with 16 Records from BW to HANA same
Second time again executed from BW to HANA now 32 records came ( it is going to append )
Executed the Open Hub service with checking DELETING Data from table option
Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
If checking in SAP BW system tio SAP BW system it is working fine ..
will this option supports through DB Connection or not ?
Please follow the attachemnet along with this discussion and help me to resolve how ?
From
Santhosh Kumar

Hi Ramanjaneyulu ,
First of all thanks for the reply ,
Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
in that there is check box i have selected already that is what my issue even though selected also
not performing the deletion from target level .
SAP BW - to SAP HANA via DBC connection
1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
2. second time again executed from BW - now hana side appaended means 16+16 = 32
3. so that i used to select the check box at OH level like Deleting data from table
4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
Thanks
Santhosh Kumar

SAP HANA Lifecycle Manager Couldn't deploy using credentials

Hello,
After HLM 1.0.7.7 upgrade from 1.0.6 on IBM appliance we could not apply support packages in normal mode. When we launch the Upgrade process from Hana Studio or Command line we recive the following message:
Error Message: Execution of 'Deploys SAP Host Agent configurations using sidadm credentials' failed.
Detailed Message: null or empty argument
Help: http://help.sap.com/hana
We tried to downdgrade and reinstall HLM again with no luck. Users, Parsswords and Certificates was also renewed. We could read this log from HLM.
INFO 2014-05-08 16:05:15 com.sap.lm.hlm.common.wizard.process.WizardProcessExecutor
Submit for subtask with ID [6cd61e09-eb68-4448-86c0-b4319abbdc3f_GetUpdateTypeTask]
INFO 2014-05-08 16:05:15 com.sap.lm.hlm.common.wizard.process.WizardProcessExecutor
Submit for subtask with ID [6cd61e09-eb68-4448-86c0-b4319abbdc3f_GetUpdateTypeTask]
INFO 2014-05-08 16:05:15 com.sap.lm.hlm.common.wizard.process.WizardProcessExecutor
Starting execution of subtask with ID [6cd61e09-eb68-4448-86c0-b4319abbdc3f_DeployConfigWithSidAdmTask]
INFO 2014-05-08 16:05:15 com.sap.lm.hlm.common.wizard.process.WizardProcessExecutor
Starting execution of subtask with ID [6cd61e09-eb68-4448-86c0-b4319abbdc3f_DeployConfigWithSidAdmTask]
INFO 2014-05-08 16:05:15 com.sap.lm.hlm.common.tasks.process.AbstractProcessExecutor
Starting process [Deploys SAP Host Agent configurations using sidadm credentials, com.sap.lm.hana.hlm.update.slpp.task.deployconfig.DeployConfigWithSidAdmTask] ({})...
INFO 2014-05-08 16:05:15 com.sap.lm.hlm.common.tasks.process.AbstractProcessExecutor
Starting process [Deploys SAP Host Agent configurations using sidadm credentials, com.sap.lm.hana.hlm.update.slpp.task.deployconfig.DeployConfigWithSidAdmTask] ({})...
INFO 2014-05-08 16:05:15 com.sap.lm.util.status.StatusTracker
Status tracker initialized using storage file /usr/sap/hlm_bootstraps/HNB/HLM/param/configdeploystatus.properties.
INFO 2014-05-08 16:05:15 com.sap.lm.util.status.StatusTracker
Status tracker initialized using storage file /usr/sap/hlm_bootstraps/HNB/HLM/param/configdeploystatus.properties.
INFO 2014-05-08 16:05:15 com.sap.lm.hana.hlm.update.slpp.context.ProgressObserverAdapter
Progress [ 0%]
INFO 2014-05-08 16:05:15 com.sap.lm.hana.hlm.update.slpp.context.ProgressObserverAdapter
Progress [ 0%]
INFO 2014-05-08 16:05:15 com.sap.lm.hana.hlm.update.slpp.task.deployconfig.AbstractDeployConfigProcessExecutor
Deploying SAP Host Agent configurations on host with sidadm credentials.
INFO 2014-05-08 16:05:15 com.sap.lm.hana.hlm.update.slpp.task.deployconfig.AbstractDeployConfigProcessExecutor
Deploying SAP Host Agent configurations on host with sidadm credentials.
INFO 2014-05-08 16:05:15 com.sap.lm.hana.hlm.update.slpp.context.ProgressObserverAdapter
Process message: Deploying SAP Host Agent configurations on host
INFO 2014-05-08 16:05:15 com.sap.lm.hana.hlm.update.slpp.context.ProgressObserverAdapter
Process message: Deploying SAP Host Agent configurations on host
INFO 2014-05-08 16:05:16 com.sap.lm.services.hostcontrol.SAPHostControlService
Deployed Host Agent configurations [/usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-hdb-plugin.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-studio-repository.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-client-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-sedm-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-repository-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-java-home-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-client-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-load-controller-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-sda-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-client-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-hdbstudio-deliveryunit.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-studio.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/newdb-studio-repository-postupdate-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-client.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-sda-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-server.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-java-executable.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/newdb-studio-repository-postupdate.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-hdb-plugin-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-studio-repository-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-load-controller.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-client-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-client-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/change-newdb-client-installation-path-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-studio-repository-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/updatehostagent-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-java-executable-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-repository.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/updatehostagent.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-server-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-client.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-load-controller-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/exists-path.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/gen-hdbstudio-deliveryunit.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/change-newdb-studio-repository-installation-path-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-server-nzdm.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-hdb-plugin.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-server.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-installation-number.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-load-controller.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-hdb-plugin-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-installation-number-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-hdb-plugin-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-server-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/updatehostagent-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio-repository.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio-repository-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-hostagent-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-hostagent.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-hdbeuspack.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-client.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-server-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-client-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-studio-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/chmod-file.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-client.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-java-home.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-sedm.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-repository-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/exists-path-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-client-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio-v2.conf] with signature /usr/sap/hlm_bootstraps/HNB/HLM/SIGNATURE.SMF on host .
INFO 2014-05-08 16:05:16 com.sap.lm.services.hostcontrol.SAPHostControlService
Deployed Host Agent configurations [/usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-hdb-plugin.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-studio-repository.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-client-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-sedm-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-repository-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-java-home-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-client-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-load-controller-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-sda-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-client-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-hdbstudio-deliveryunit.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-studio.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/newdb-studio-repository-postupdate-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-client.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-sda-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-server.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-java-executable.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/newdb-studio-repository-postupdate.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-hdb-plugin-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-studio-repository-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-load-controller.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-client-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-client-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/change-newdb-client-installation-path-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-studio-repository-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/updatehostagent-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-java-executable-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-repository.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/updatehostagent.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-server-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-client.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-load-controller-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/exists-path.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/gen-hdbstudio-deliveryunit.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/change-newdb-studio-repository-installation-path-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-server-nzdm.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-hdb-plugin.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-server.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-installation-number.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-load-controller.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-hdb-plugin-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-installation-number-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-hdb-plugin-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-server-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/updatehostagent-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio-repository.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio-repository-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-hostagent-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-hostagent.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-hdbeuspack.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-client.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-server-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-client-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-studio-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/chmod-file.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-client.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-java-home.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-sedm.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-repository-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/exists-path-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-client-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio-v2.conf] with signature /usr/sap/hlm_bootstraps/HNB/HLM/SIGNATURE.SMF on host .
ERROR 2014-05-08 16:05:16 com.sap.lm.hana.hlm.update.slpp.task.AbstractUpdateProcessExecutor
Process executor failed
java.lang.IllegalArgumentException: null or empty argument
at com.sap.lm.hlm.common.runtime.HlmRuntime.assertNotNullOrEmptyArgumens(HlmRuntime.java:342)
at com.sap.lm.hlm.common.runtime.HlmRuntime.deployHlmExecutableScripts(HlmRuntime.java:74)
at com.sap.lm.hlm.common.runtime.HlmRuntime.deployHlmExecutableScripts(HlmRuntime.java:69)
at com.sap.lm.hana.hlm.update.slpp.task.deployconfig.AbstractDeployConfigProcessExecutor.deployconfigurations(AbstractDeployConfigProcessExecutor.java:114)
at com.sap.lm.hana.hlm.update.slpp.task.deployconfig.DeployConfigWithSidAdmProcessExecutor.executeInternal(DeployConfigWithSidAdmProcessExecutor.java:42)
at com.sap.lm.hlm.common.tasks.process.AbstractProcessExecutor.startInterruptibleExecution(AbstractProcessExecutor.java:128)
at com.sap.lm.hlm.common.tasks.process.AbstractProcessExecutor$1.run(AbstractProcessExecutor.java:108)
ERROR 2014-05-08 16:05:16 com.sap.lm.hana.hlm.update.slpp.task.AbstractUpdateProcessExecutor
Process executor failed
java.lang.IllegalArgumentException: null or empty argument
at com.sap.lm.hlm.common.runtime.HlmRuntime.assertNotNullOrEmptyArgumens(HlmRuntime.java:342)
at com.sap.lm.hlm.common.runtime.HlmRuntime.deployHlmExecutableScripts(HlmRuntime.java:74)
at com.sap.lm.hlm.common.runtime.HlmRuntime.deployHlmExecutableScripts(HlmRuntime.java:69)
at com.sap.lm.hana.hlm.update.slpp.task.deployconfig.AbstractDeployConfigProcessExecutor.deployconfigurations(AbstractDeployConfigProcessExecutor.java:114)
at com.sap.lm.hana.hlm.update.slpp.task.deployconfig.DeployConfigWithSidAdmProcessExecutor.executeInternal(DeployConfigWithSidAdmProcessExecutor.java:42)
at com.sap.lm.hlm.common.tasks.process.AbstractProcessExecutor.startInterruptibleExecution(AbstractProcessExecutor.java:128)
at com.sap.lm.hlm.common.tasks.process.AbstractProcessExecutor$1.run(AbstractProcessExecutor.java:108)
ERROR 2014-05-08 16:05:16 com.sap.lm.hlm.common.wizard.process.WizardProcessExecutor
Execution of subtask with ID [6cd61e09-eb68-4448-86c0-b4319abbdc3f_DeployConfigWithSidAdmTask, Execution of 'Deploys SAP Host Agent configurations using sidadm credentials' failed.] has failed: {}
ERROR 2014-05-08 16:05:16 com.sap.lm.hlm.common.wizard.process.WizardProcessExecutor
Execution of subtask with ID [6cd61e09-eb68-4448-86c0-b4319abbdc3f_DeployConfigWithSidAdmTask, Execution of 'Deploys SAP Host Agent configurations using sidadm credentials' failed.] has failed: {}
Could you please help us with this issue?
Kind Regards,
Message was edited by: Tom Flanagan

Hi Alston,
I'm sorry for the late reply. Are you still experiencing this error?
I've seen this issue before with another customer and the final resolution was to make sure the /etc/hosts file does not have the ipv6 BEFORE ipv4. Here is an example:
>> cat /etc/hosts
# special IPv6 addresses
::1             localhost ipv6-localhost
ipv6-loopback
ff02::3         ipv6-allhosts
192.168.180.31 abceccd01.sap.com abceccd01
192.168.180.34 abceccs01.sap.com abceccs01
192.168.180.35 abccrms01.sap.com abccrms01
192.168.180.30 abceccs01.sap.com abceccs01
10.36.10.5      abceccs01-nfs.sap.com abceccs01-nfs
The resolution would be to change the ordering. So the IPv6 section appears below the IPv4 section.
After that is done, perform the following to "reset" HLM.
1. Stop all browsers that have HLM pages open
2. Stop the Studio
3. Execute /usr/sap/hlm_bootstraps/<SID>/HLM/stop-hlm.sh –f
4. Check that there are no any left HLM processes
5. Go to /usr/sap/hlm_bootstraps/<SID>/HLM/param/
and rename all files except logging.properties
6. go to directory: /usr/sap/hlm_bootstraps/<SID>/HLM
and rename directory persistence
7 restart SAP Host Agent - as root: /usr/sap/hostctrl/exe/saphostexec
-restart
8. open HLM ui via browser:
https://<hostname>:1129/lmsl/HLM/<SID>/ui/
I hope this helps.
Best Regards,
Jimmy

How to load SAP R/3 tables into a schema in SAP HANA Cloud Platform

Hello, everyone.
First of all, my apologies for any basic mistakes, I'm new here, so there's a lot of stuff I don't know yet.
I need to upload some tables to a schema in my HANA trial account to test some algorithms and see if the kind of application I want to build is possible, but I don't know the best way to do this.
To my understanding, using the Cloud Connector would merely make my tables visible to my application in the cloud, but it would not actually upload them (or rather, I'm sure there's a way to upload them using it, but I suspect there are far simpler methods out there).
I think one of the simplest possible methods would be to create the schema, open a tunnel using the console client, and to import the tables to the schema via the HANA Studio. Maybe, if that doesn't work, a CMIS repository could be used (although I'm somewhat skeptical, as I think something like this it's not its intended use). Or maybe there's another possibility I'm not seeing. Either way, I would love to hear some answers that could shed some light on this.
Also, as I mentioned earlier I'm only using a trial account for this, I don't know if there's any limitation that could prevent me from doing this. I'd also like to hear your opinion on this matter.
Thank you.

BUDAT is the technical name for Posting Date field. This field is used many DB Tables/ Strucutres. Using where used option you can find the required tables.
I suggest you to look at BSEG table for Finace Document postings by Posting Date.

HANA Analytical View Display Data Issue

SAP Experts,
Need your kind help for the below issue,
I've created an analytical view from a DSO Active Table in HANA Studio. Through IDT (Information Design Tool), when I tried to view the contents of this DSO table (AYPURDA0100) by connecting to HANA, I see the following error which is mentioned below,
Error:
Error while refreshing the data provider.
Cause of Error:
SAP AGSDBODBC DLLHDB General error;7 feature not supported: cannot execute select * on olap cube: zthd/AYPURDA0100: line 1 col 26 (at pos
Note: The AYPURDA0100 table contents are displayed in HANA Studio. However when a view was created with NO join conditions for the same table with few selected fields including measures, the display data is not working.
Your views are greatly appreciated. Thank You in advance

Check out the comments from Marc and Lars in the thread below.
http://forums.sdn.sap.com/thread.jspa?forumID=491&threadID=2138937

How to create a RFC destination for extracting data to HANA

Hello All,
Could someone help me in providing a document or note on how to create a RFC destination for extracting data from SAP data source to HANA using SAP LT replication server ?
I am able to create a data base connection while transforming data from non SAP data source,but wasnt able to transform data which is from SAP abap tables .

Hi Venkatesh,
In SM59 t.code we create RFC destinations.
Go thru the video link for creating RFC destinations step by step
How to setup a trusted RFC connection between SAP systems: a step-by-step guide - YouTube

Are these key fields in 'Direct Update' DSO table in BW on HANA (BW740SP7) correct?

Pls see below for a very strange behaviour of all active tables of type 'Direct Update' DSO in our system.
Is this a bug or is this somehow supposed to be like this (i.e. a feature)?
DSO definition:
Active table of type 'Column Store' - note fields marked as 'Key' different from DSO definition:
The DSO table content:
In ABAP executing the following select on the DSO table:
The result is garbage (the content of QQQPARST0 lands in /BIC/QQQPAFL0 and QQQSCPRO lands in /BIC/QQQPARA0):

Dear Sundaresan,
thanks for this suggestion, but I have posted the question in the following forums:
SAP Business Warehouse: What is this with the 'Direct' DSO table in BW on HANA (BW740SP7)
SAP BW powered by HANA: Direct Update DSO keyfields in RSA1 <> SE11 & SELECT returns garbage
ABAP for SAP HANA: Direct Update DSO keyfields in RSA1 <> SE11 & SELECT returns garbage
So far no real luck but maybe soon
Greetings

HANA Housekeeping

Similar Messages

Maybe you are looking for