Handling WebService with more than one operation

Hi Everybody,
I have a hassle!
First of All, I'm Newbie, using Oracle Service Bus
I have to Implement a WS with aproximately 6 operations, in Service Bus.
I create my WSD and my XSD Artifacts, with no problem, the issue comes when I try to create My Proxy Service in OSB
Step 1 .- Create Proxy Service
Step 2 .- I make a Link from my Proxy Service to my Business Service wich contains the WSDL with the 6 operations
Step 3 .- I clic on edit the message flow in the actions panel to add route
Step 4 .- I edit the route looking for a Webservice and selecting the method (In this Case I select one method, because I don't know how to route many operations in one Proxy Service)
When I did that, my WS in OSB wasn't able to invoke one method. I got a timeout .. I don't know, if maybe I'm doing something wrong!!.
What I want is a way to route many methods in a same Web Service
I've done operational bifurcation in the Web Proxy.. With that component, I can choose methods like conditionals, and I can add a route destination for each method.. when I test it .. My OSB WS never reply me an asnwer, I got Timeout. Takes a lot of time
I also tried to do it with IF ELSE conditionals trying to know the name of the method from the WLS Headers and routing them to a specific webservice method. But I couldn't do it!
I check the WS out by itself and works in 2 seconds, so it's Working!
Any clues?, Well I hope you can help me!!
Thanks in Advance!
Edited by: user11334562 on 05-ago-2011 17:38

Pierluigi,
Thanks for your answer,
I had to rebuild my OSB project, and refact all my OSB artifacts,
My Proxy Service, I was trying to do it with my WSDL again, when I already had done in a Business Service,
So in my proxy I chose the BS instead WSDL and all Works Perfectly using SOAP Content.
Pretty Thanks!!
ABC

Similar Messages

Service interface with more than one operation

Hi all,
is it possible to have a service interface with more than one operation?
I have found this blog:
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID0209118050DB10459657028039341762End?blog=/pub/wlg/15123
But this sentence:
ABAP proxy (inbound/ outbound) cannot be developed out of a Service Interface having Operations with different type of messages included. If an ABAP proxy is to be developed then all the messages included should be of one type i.e. either the included messages should be Message Type, External Message, IDOC or RFC Message. This behavior can be observed when a Service Interface is created and then subjected for a check
regards

Hi,
now the interface is running but I get another error in .NET.
"The header 'Diagnostic' from the namespace 'http://sap.com/xi/XI/Message/30' was not understood by the recipient of this message, causing the message to not be processed. This error typically indicates that the sender of this message has enabled a communication protocol that the receiver cannot process. Please ensure that the configuration of the client's binding is consistent with the service's binding. "
Any ideas?
regards

How to handle form with more than one page in struts

Hai,
i have more than one page in my struts web apps. each page has a form & i have submit button @ last page. I navigate between these pages using titles. data has to exist when i come back from another page(i.e i am in page1 i have some fields called name & address as textfield, i move to page2 & then i go back to page1 @ that time i should have the name & addess values that i entered previous in the corresponding textfield) & finally when i submit need to get values form all these pages.
Plz tell me how to do this.

Hi prasadmca ,
1.Try to store those value in session variable
2. or else store those value in DB

Web Service with more than one operation?

Hey,
a web service could contain 1..N operations. It is possible
to define this with XI? Normally I took an outbound interface
and create a web service, but this outbound interface defines
the structure of the only operation of this web service, did it?
Does SAP XI supports only a one-operation web service?
thanks
chris

This is supported from PI 7.1 onwards.
VJ

Publish more than one operation by WebService

Hi all
Somebody can helpme saying me how to do the following with eGate ( i cant use eInsight ):
For now im enabled to publish one operation and one webservice, but mi problem is that i can't publish one WebService with more than one operation and i can't change the mandatory "ExecutePortType", all my webservices url are in the form:
http://<server>:<port>/myws/ExecutePortType
1. Why the context name is about the WebService and why ExecutePortType is mandatory ?
2. I can't publish a Web Service with more than one operation ( The documentation says that the ExecutePortType supports just one operation )?
some body can helpme with an example ?

What client are you using? Are you using the netbeans enterprise pack test driver? If so, you can set the soap action in the test properties to match the ones you have defined in the WSDL.
Also if you could post the actual soap message you are sending that would help.
I also noticed that you're using parts defined via types with a document/literal binding. To be more basic profile compliant in that casue you may want to use RPC style instead - it is not strictly necessary, but increases interoperability.
Andi

More than one operation defined. Unable to resolve operation

Hi,
Using the attached WSDL to define a BPEL sequence I allways get the following error message:
More than one operation defined. Unable to resolve operation:
This occured in the moment i introduced a seconde operation. With one operation everything works fine.
Does anybody know how to define a WSDL that works for the BPEL system with more than one operation?
Best Regards,
Axel.
WSDL:
<?xml version="1.0" encoding="UTF-8"?>
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://dummy.ws.axelbenz.de/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" targetNamespace="http://dummy.ws.axelbenz.de/" name="StringInOutService" xmlns:plink="http://schemas.xmlsoap.org/ws/2004/03/partner-link/">
<types>
<xsd:schema>
<xsd:import namespace="http://dummy.ws.axelbenz.de/" schemaLocation="upperService.xsd" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" />
</xsd:schema>
</types>
<message name="lowerMessage">
<part name="lowerParameters" type="tns:lowerType" />
</message>
<message name="lowerMessageResponse">
<part name="lowerResponseParameters" type="tns:lowerTypeResponse" />
</message>
<message name="upperMessage">
<part name="upperParameters" type="tns:upperType" />
</message>
<message name="upperMessageResponse">
<part name="upperResponseParameters" type="tns:upperTypeResponse" />
</message>
<portType name="StringInOut">
<operation name="lowerOperation">
<input message="tns:lowerMessage" />
<output message="tns:lowerMessageResponse" />
</operation>
<operation name="upperOperation">
<input message="tns:upperMessage" />
<output message="tns:upperMessageResponse" />
</operation>
</portType>
<binding name="StringInOutPortBinding" type="tns:StringInOut">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
<operation name="lowerOperation">
<soap:operation soapAction="lower" style="document" />
<input>
<soap:body use="literal" parts="lowerParameters" />
</input>
<output>
<soap:body use="literal" parts="lowerResponseParameters" />
</output>
</operation>
<operation name="upperOperation">
<soap:operation soapAction="upper" style="document" />
<input>
<soap:body use="literal" parts="upperParameters" namespace="" />
</input>
<output>
<soap:body use="literal" parts="upperResponseParameters" />
</output>
</operation>
</binding>
<service name="StringInOutService">
<port name="StringInOutPort" binding="tns:StringInOutPortBinding">
<soap:address location="http://GWBE0040.int.gematik.de:18181/DummyServices/StringInOutService" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" />
</port>
</service>
<plink:partnerLinkType name="partnerlinktype1">
<plink:role name="serviceRequestor" portType="tns:StringInOut"/>
</plink:partnerLinkType>
</definitions>
XSD:
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema version="1.0" targetNamespace="http://dummy.ws.axelbenz.de/" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="lower" type="ns1:lowerType" xmlns:ns1="http://dummy.ws.axelbenz.de/" />
<xs:complexType name="lowerType">
<xs:sequence>
<xs:element name="inp" type="xs:string" minOccurs="0" />
</xs:sequence>
</xs:complexType>
<xs:element name="lowerResponse" type="ns2:lowerTypeResponse" xmlns:ns2="http://dummy.ws.axelbenz.de/" />
<xs:complexType name="lowerTypeResponse">
<xs:sequence>
<xs:element name="return" type="xs:string" minOccurs="0" />
</xs:sequence>
</xs:complexType>
<xs:element name="upper" type="ns3:upperType" xmlns:ns3="http://dummy.ws.axelbenz.de/" />
<xs:complexType name="upperType">
<xs:sequence>
<xs:element name="inp" type="xs:string" minOccurs="0" />
</xs:sequence>
</xs:complexType>
<xs:element name="upperResponse" type="ns4:upperTypeResponse" xmlns:ns4="http://dummy.ws.axelbenz.de/" />
<xs:complexType name="upperTypeResponse">
<xs:sequence>
<xs:element name="return" type="xs:string" minOccurs="0" />
</xs:sequence>
</xs:complexType>
</xs:schema>

What client are you using? Are you using the netbeans enterprise pack test driver? If so, you can set the soap action in the test properties to match the ones you have defined in the WSDL.
Also if you could post the actual soap message you are sending that would help.
I also noticed that you're using parts defined via types with a document/literal binding. To be more basic profile compliant in that casue you may want to use RPC style instead - it is not strictly necessary, but increases interoperability.
Andi

Document/literal style wsdl with more than one port

Recently I have changed wsdl style from rpc/encoded to document/literal as BPEL does not handle soapenc:arrayType. The wsdl contains 2 operations and few complex type definitions.
In BPEL Designer I have created a process that invokes all operations defined in the wsdl, but only one of them will have some data in the response message and the other one will have an empty message. On the other hand, when I use stub generation to invoke Web Service everything is working fine.
If I provide separate wsdl for each operation (in BPEL process I would have two partnerLinks instead of one) than it works fine.
Does this mean that BPEL does not handle document/literal style endpoints with more than one port (operation)?
I have tested this with the orabpel_2.0_J1_win32.exe and orabpel_2.0rc9_win32.exe. Web Services, used for this test, are deployed in Jboss 3.2.3 and axis-1_2beta3.
WSDL used as partnerLink:
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions targetNamespace="http://test" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://test" xmlns:intf="http://test" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<wsdl:types>
<schema elementFormDefault="qualified" targetNamespace="http://test" xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="CardId">
<sequence>
<element name="cardType" nillable="true" type="xsd:string" />
<element name="number" nillable="true" type="xsd:string" />
</sequence>
</complexType>
<complexType name="CardIdArray">
<sequence>
<element maxOccurs="unbounded" name="item" nillable="true" type="impl:CardId" />
</sequence>
</complexType>
<element name="getCardsReturn" type="impl:CardIdArray" />
<complexType name="CardholderCards">
<sequence>
<element maxOccurs="unbounded" name="cards" nillable="true" type="impl:CardId" />
<element name="serialNumber" nillable="true" type="xsd:string" />
</sequence>
</complexType>
<element name="retrieveChReturn" type="impl:CardholderCards" />
</schema>
</wsdl:types>
<wsdl:message name="retrieveChRequest" />
<wsdl:message name="getCardsRequest" />
<wsdl:message name="retrieveChResponse">
<wsdl:part element="impl:retrieveChReturn" name="retrieveChReturn" />
</wsdl:message>
<wsdl:message name="getCardsResponse">
<wsdl:part element="impl:getCardsReturn" name="getCardsReturn" />
</wsdl:message>
<wsdl:portType name="TestService">
<wsdl:operation name="getCards">
<wsdl:input message="impl:getCardsRequest" name="getCardsRequest" />
<wsdl:output message="impl:getCardsResponse" name="getCardsResponse" />
</wsdl:operation>
<wsdl:operation name="retrieveCh">
<wsdl:input message="impl:retrieveChRequest" name="retrieveChRequest" />
<wsdl:output message="impl:retrieveChResponse" name="retrieveChResponse" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="TestServiceSoapBinding" type="impl:TestService">
<wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
<wsdl:operation name="getCards">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="getCardsRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="getCardsResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="retrieveCh">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="retrieveChRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="retrieveChResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="TestServiceService">
<wsdl:port binding="impl:TestServiceSoapBinding" name="TestService">
<wsdlsoap:address location="http://localhost:8080/axis/services/TestService" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

Hi Dragana,
We definitely support the ability to call a web service that exposes two operations (document/literal or not).
Glancing through your WSDL, it looks good.
Could you please try to tunnel the second request and see 1) what data is sent to the service and 2) what data is returned by the service?
Can you please email us a reproduceable case so that we can help troubleshoot in parallel?
Thank you,
Edwin
[email protected]
please rename .zip to .zap

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

A Cloud subscription provides for installing working installations on two machines. You can have mixed operating systems (both Windows and Apple's OX).

How to handle bdc for more than one transaction?

how to handle bdc for more than one transaction?

Hi srk,
I am providing you with some references below. Hope this prove to be helpful to you.
Method 1:
Use one BDC_OPEN_GROUP
Multiple BDC_INSERT
One BDC_CLOSE_GROUP.
Call function BDC_OPENGROUP.
Build BDC data and call lBDC_INSERT for transaction 1
Build BDC data and call lBDC_INSERT for transaction 2
Build BDC data and call lBDC_INSERT for transaction 3
paas the tcodes to bdc_insert.
call function BDC_CLOSE_GROUP.
Also check this out:
Here we need to record 2 transactions (shdb).
Once completion of the recording. Populate the data into input internal table .
Loop the internal table and process the 2 transactions
like
1. BDC_OPEN_GROUP
2. LOOP AT ITAB
a. Populate first transaction recording data
and pass transaction to the BDC_INSERT_GROUP.
BDC_INSERT_GROUP.
b. Populate second transaction recording data
and pass transaction to the BDC_INSERT_GROUP.
BDC_INSERT_GROUP.
ENDLOOP.
3. BDC_CLOSE_GROUP
the above info can be found at : How to use 2 transactions in BDC?
Also check this out:
Suppose u have created recordings for transactions 'MM01' 'XK01' and 'VA01'.
Then do this:
bdc_open_group.
after this we have to fill the bdcdata structure for one transaction.here 'MM01'.
bdc_insert.
refresh bdcdata.
after this we have to fill the bdcdata structure for one transaction.here 'xk01'.
bdc_insert .
refresh bdcdata.
after this we have to fill the bdcdata structure for one transaction.here 'va01'.
bdc_insert.
bdc_close_group.
Hope these are useful to you.
Please reward if any of the above are useful.
Regards,
Kalyan

Javax.jbi.messaging.MessagingException: More than one operation defined

Hi,
i had already implemented a web service consisting of 6 methods that works fine. Now i want to access this service via JBI. Therefore i developed a service assembly containing only of a soap binding component. When i try to access the jbi environment via the inbound endpoint OpenESB throws following exception:
[#|2006-07-26T16:23:50.531+0200|WARNING|sun-appserver-pe9.0|com.sun.jbi.component.com.sun.httpsoapbc-1.0-2com.sun.jbi.httpsoapbc.embedded.GrizzlyRequestProcessor|_ThreadID=32;_ThreadName=httpWorkerThread-12010-2;_RequestID=a33dbb24-d088-4a6a-9642-96187c32bb36;|Exception in processing request.
javax.jbi.messaging.MessagingException: More than one operation defined. Unable to resolve operation: {http://service}UseRepositoryService,UseRepository,inbound
     at com.sun.jbi.httpsoapbc.InboundMessageProcessor.execute(InboundMessageProcessor.java:214)
     at com.sun.jbi.httpsoapbc.embedded.GrizzlyRequestProcessor.processAsynchRequest(GrizzlyRequestProcessor.java:214)
     at com.sun.jbi.httpsoapbc.embedded.GrizzlyRequestProcessor.service(GrizzlyRequestProcessor.java:173)
     at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
     at com.sun.jbi.httpsoapbc.embedded.JBIGrizzlyAsyncFilter.doFilter(JBIGrizzlyAsyncFilter.java:70)
     at com.sun.enterprise.web.connector.grizzly.async.DefaultAsyncExecutor.invokeFilters(DefaultAsyncExecutor.java:143)
     at com.sun.enterprise.web.connector.grizzly.async.DefaultAsyncExecutor.interrupt(DefaultAsyncExecutor.java:132)
     at com.sun.enterprise.web.connector.grizzly.async.AsyncProcessorTask.doTask(AsyncProcessorTask.java:81)
     at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
     at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
How can i specify in my service assembly that if i send a SOAP request for method X on my client that OpenESB routes this message to the correct Outbound endpoint?
Thank you
Thomas

Hello Andi,
thanks for your reply. To exclude the soap action error i will post the complete wsdl file now. But in my opinion every operation has its own input and output definition.
The consumer wsdl:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions targetNamespace="http://service" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://service" xmlns:intf="http://service" xmlns:tns1="http://types" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">

<wsdl:types>
<schema elementFormDefault="qualified" targetNamespace="http://service" xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://types"/>
<element name="loadEcore">
<complexType>
<sequence>
<element name="ecoreId" type="xsd:long"/>
</sequence>a
</complexType>
</element>
<element name="loadEcoreResponse">
<complexType>
<sequence>
<element name="loadEcoreReturn" type="xsd:base64Binary"/>
</sequence>
</complexType>
</element>
<element name="loadInstance">
<complexType>
<sequence>
<element name="instanceId" type="xsd:long"/>
</sequence>
</complexType>
</element>
<element name="loadInstanceResponse">
<complexType>
<sequence>
<element name="loadInstanceReturn" type="xsd:base64Binary"/>
</sequence>
</complexType>
</element>
<element name="loadInstanceForProject">
<complexType>
<sequence>
<element name="instanceId" type="xsd:long"/>
</sequence>
</complexType>
</element>
<element name="loadInstanceForProjectResponse">
<complexType>
<sequence>
<element name="loadInstanceForProjectReturn" type="xsd:base64Binary"/>
</sequence>
</complexType>
</element>
<element name="deleteInstance">
<complexType>
<sequence>
<element name="instanceId" type="xsd:long"/>
</sequence>
</complexType>
</element>
<element name="deleteInstanceResponse">
<complexType>
<sequence>
<element name="deleteInstanceReturn" type="xsd:boolean"/>
</sequence>
</complexType>
</element>
<element name="getAllInstancesFromDB">
<complexType/>
</element>
<element name="getAllInstancesFromDBResponse">
<complexType>
<sequence>
<element maxOccurs="unbounded" name="getAllInstancesFromDBReturn" type="tns1:InstancePackageValueBean"/>
</sequence>
</complexType>
</element>
<element name="saveInstance">
<complexType>
<sequence>
<element name="resourceBytes" type="xsd:base64Binary"/>
<element name="fileName" type="xsd:string"/>
</sequence>
</complexType>
</element>
<element name="saveInstanceResponse">
<complexType>
<sequence>
<element name="saveInstanceReturn" type="xsd:boolean"/>
</sequence>
</complexType>
</element>
</schema>
<schema elementFormDefault="qualified" targetNamespace="http://types" xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="InstancePackageValueBean">
<sequence>
<element name="ecoreId" type="xsd:long"/>
<element name="fileName" nillable="true" type="xsd:string"/>
<element name="id" type="xsd:long"/>
<element name="name" nillable="true" type="xsd:string"/>
<element name="usedModels" nillable="true" type="xsd:string"/>
</sequence>
</complexType>
</schema>
</wsdl:types>
<wsdl:message name="loadEcoreRequest">
<wsdl:part element="impl:loadEcore" name="parameters"/>
</wsdl:message>
<wsdl:message name="loadEcoreResponse">
<wsdl:part element="impl:loadEcoreResponse" name="parameters"/>
</wsdl:message>
<wsdl:message name="saveInstanceResponse">
<wsdl:part element="impl:saveInstanceResponse" name="parameters"/>
</wsdl:message>
<wsdl:message name="loadInstanceForProjectResponse">
<wsdl:part element="impl:loadInstanceForProjectResponse" name="parameters"/>
</wsdl:message>
<wsdl:message name="loadInstanceResponse">
<wsdl:part element="impl:loadInstanceResponse" name="parameters"/>
</wsdl:message>
<wsdl:message name="getAllInstancesFromDBRequest">
<wsdl:part element="impl:getAllInstancesFromDB" name="parameters"/>
</wsdl:message>
<wsdl:message name="loadInstanceRequest">
<wsdl:part element="impl:loadInstance" name="parameters"/>
</wsdl:message>
<wsdl:message name="getAllInstancesFromDBResponse">
<wsdl:part element="impl:getAllInstancesFromDBResponse" name="parameters"/>
</wsdl:message>
<wsdl:message name="loadInstanceForProjectRequest">
<wsdl:part element="impl:loadInstanceForProject" name="parameters"/>
</wsdl:message>
<wsdl:message name="saveInstanceRequest">
<wsdl:part element="impl:saveInstance" name="parameters"/>
</wsdl:message>
<wsdl:message name="deleteInstanceRequest">
<wsdl:part element="impl:deleteInstance" name="parameters"/>
</wsdl:message>
<wsdl:message name="deleteInstanceResponse">
<wsdl:part element="impl:deleteInstanceResponse" name="parameters"/>
</wsdl:message>
<wsdl:portType name="UseRepository">
<wsdl:operation name="loadEcore">
<wsdl:input message="impl:loadEcoreRequest" name="loadEcoreRequest"/>
<wsdl:output message="impl:loadEcoreResponse" name="loadEcoreResponse"/>
</wsdl:operation>
<wsdl:operation name="loadInstance">
<wsdl:input message="impl:loadInstanceRequest" name="loadInstanceRequest"/>
<wsdl:output message="impl:loadInstanceResponse" name="loadInstanceResponse"/>
</wsdl:operation>
<wsdl:operation name="loadInstanceForProject">
<wsdl:input message="impl:loadInstanceForProjectRequest" name="loadInstanceForProjectRequest"/>
<wsdl:output message="impl:loadInstanceForProjectResponse" name="loadInstanceForProjectResponse"/>
</wsdl:operation>
<wsdl:operation name="deleteInstance">
<wsdl:input message="impl:deleteInstanceRequest" name="deleteInstanceRequest"/>
<wsdl:output message="impl:deleteInstanceResponse" name="deleteInstanceResponse"/>
</wsdl:operation>
<wsdl:operation name="getAllInstancesFromDB">
<wsdl:input message="impl:getAllInstancesFromDBRequest" name="getAllInstancesFromDBRequest"/>
<wsdl:output message="impl:getAllInstancesFromDBResponse" name="getAllInstancesFromDBResponse"/>
</wsdl:operation>
<wsdl:operation name="saveInstance">
<wsdl:input message="impl:saveInstanceRequest" name="saveInstanceRequest"/>
<wsdl:output message="impl:saveInstanceResponse" name="saveInstanceResponse"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="UseRepositorySoapBinding" type="impl:UseRepository">
<wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="loadEcore">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="loadEcoreRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="loadEcoreResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="loadInstance">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="loadInstanceRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="loadInstanceResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="loadInstanceForProject">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="loadInstanceForProjectRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="loadInstanceForProjectResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="deleteInstance">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="deleteInstanceRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="deleteInstanceResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="getAllInstancesFromDB">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getAllInstancesFromDBRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getAllInstancesFromDBResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="saveInstance">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="saveInstanceRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="saveInstanceResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="UseRepositoryService">
<wsdl:port binding="impl:UseRepositorySoapBinding" name="UseRepository">
<wsdlsoap:address location="http://localhost:12010/service/repository"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Except for the service name, port, address etc the provider wsdl is the same.
Could you tell me if it works when i will only use one operation for example?
I had already implemented a service assembly which contained only one operation. That SA worked fine.
If the Service Assembly and Binding Component descriptors had wrong references e.g. the wrong interface-name, would OpenESB throws an exception while deployment?
In addition, could you tell me a good link to a nice bpel engine example? How is the interaction between client ans service using the bpel engine?
I think using the SoapBC the interaction is following:
Client --> BC --> Service
With Bpel engine?
Client --> BC --> bpel --> BC2 --> service?
Thanks a lot
Thomas

Can you sync an ipod nano 5th gen with more than one computer

Can you sync an Ipod nano 5th generations with more than one computer. One is a Dell with xp operating system and the other is an Mac laptop.

It is possible to sync your iPod with multiple computers, but syncing with different platforms is not supported by Apple. See this article for more details on how to get this set up.
http://support.apple.com/kb/HT1202
B-rock

Assignment of components to more than one operation in routing.

Hi to all,
I am trying to allocate components of material BoM to more than one operation in routing. I know one way to do it is to define that components again & agin in material BoM & assigned them to operations in routing. Are other ways available to do the same.
Thanks & regards,
Abu Arbab

Dear,
Now I am clear.
You need to create different 2 BOM and with BOM items, as below,
example - total requirement of material A is say 10.
Semi finished Product- X BOM
BOM item 1 - material A-qty 8
BOM item 2 - material B-qty -5
Finished material Y - BOM
BOM item 1 - semifished material X-qty 10
BOM item 2 - material C-qty 10
BOM item 3 - material A-qty 2
BOM item 4 - material D-qty -2
You need to create above 2 BOM's if you want to see semifished product into inventory, if not proceed as below
Finished material Y - BOM
BOM item 1 - material A-qty 8 assign it to routing operation 10
BOM item 2 - material B-qty -5 assign it to routing operation 10
BOM item 2 - material C-qty 10 assign it to routing operation 20
BOM item 3 - material A-qty 2 assign it to routing operation 30
BOM item 4 - material D-qty -2 assign it to routing operation 30
I think this is the only way you can map it.

Can I use a magic trackpad with more than one Mac at a time?

I am attempting to pair a MTP with a second MacBook Pro. So far I can't get system preferences to find the MTP.
I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac. To do this, you first remove the existing pairing and then pair the trackpad again'.
Can anyone advise, please?
If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
Thanks

Yes, your keyboard, mouse or trackpad can be paired with multiple Macs. You can even have multiple keyboards, mice or trackpads paired with one Mac. The caveat is that the device can only be connected to one Mac at a time. The device can't be paired or connected with a Mac while it's currently connected to another.
Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other. The device will connect with the first available paired Mac and then unavailable to the second. If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on. I do this with a keyboard from my iMac to a Mac Mini in another room.
Captfred

Error while running spatial queries on a table with more than one geometry.

Hello,
I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
We are running Oracle Standard 11.1.0.7.0.
Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
What this script does:
1. Create table object1 with two geometry columns, geom1, geom2.
2. Create metadata (projected coordinate system).
3. Insert a row.
4. Create spacial indices on both columns.
5. Run a SDO_RELATE query on one column. Everything is fine.
6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
7. Clean.
CREATE TABLE object1
id NUMBER PRIMARY KEY,
geom1 SDO_GEOMETRY,
geom2 SDO_GEOMETRY
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM1',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM2',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
DROP INDEX object1_geom1_sidx;
DROP INDEX object1_geom2_sidx;
DROP TABLE object1;
Thanks for help.

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

Handling WebService with more than one operation

Similar Messages

Maybe you are looking for