Hardware error, random squares, rectangles

Hi everyone. I just bough a 17" Macbook Pro (< 1 month), and a couple of times during the last week the monitor displayed some strange random squares and rectangles. For example, when scrolling down in the Firefox window, the squares looked like they contained pieces of "old" screen that did not refresh. I was using the spaces feature every time this behavior occurred.
I ran twice the hardware test as explained here: http://support.apple.com/kb/HT1509 (the extended version), and the first time it came with the following error code: 4SNS/1/40000000:Tm0P-61.250. The second time I ran it, no errors were reported.
I wonder how serious this problem is, and will appreciate your suggestions.

4SNS/1/40000000:Tm0P-61.250 is a Temperature Sensor failed warning, but the fact you didn't get it the second time means there's nothing to worry about there.
The artefacts from your graphics card / GPU are a different matter all together and I'd suggest you try and grab some screen captures of that if you can (if you can't screen capture then use an external stills or video camera) then take it in for Apple to look it over. There were some 'bad' graphics cards a while back that Apple replaced but I didn't think this was true of newer machines.

Similar Messages

Please help, constant video hardware error !

Please help, I can't find the problem. Am on windows 8 for a while now and I check my event viewer from time to time and I found several error massages that exists in my event viewer and the latest was while watching a movie on windows media player here the details. (I didn't have any problem while gaming even the GPU temp are idle due too every game requirements)
Source
Windows
Summary
Video hardware error
Date
‎27/‎06/‎2013 07:10
Status
Not reported
Description
A problem with your video hardware caused Windows to stop working correctly.
Problem signature
Problem Event Name:   LiveKernelEvent
OS Version:   6.2.9200.2.0.0.256.48
Locale ID:   2057
Files that help describe the problem
WD-20130627-0710-01.dmp
sysdata.xml
WERInternalMetadata.xml
Extra information about the problem
BCCode:   141
BCP1:   FFFFFA800FF394D0
BCP2:   FFFFF880077772B0
BCP3:   0000000000000000
BCP4:   00000000000015C0
OS Version:   6_2_9200
Service Pack:   0_0
Product:   256_1
I want to know what happened to my card?!! did the 320.18 driver damage my GPU??!!! I cant specify what is the problem is it the card or a conflict or what I am getting nuts here please help.
This is the error from Windows Media Player.
Description
Faulting Application Path:   C:\Program Files (x86)\Windows Media Player\wmplayer.exe
Problem signature
Problem Event Name:   APPCRASH
Application Name:   wmplayer.exe
Application Version:   12.0.9200.16420
Application Timestamp:   505aa40e
Fault Module Name:   nvd3dum.dll
Fault Module Version:   9.18.13.1422
Fault Module Timestamp:   51427c76
Exception Code:   c0000005
Exception Offset:   00773806
OS Version:   6.2.9200.2.0.0.256.48
Locale ID:   2057
Additional Information 1:   5861
Additional Information 2:   5861822e1919d7c014bbb064c64908b2
Additional Information 3:   f3d5
Additional Information 4:   f3d5be0cad2787556264647dc02181c3
My sys:
i3-3220 CPU 3.30GHz, Cooler Master Hyper TX3
CORSAIR Vengeance 8GB 2 x 4GB DDR3 1600
WD Caviar Blue 1TB SATA 6Gb/s WD10EZEX
MSI N560GTX-Ti Hawk (driver 314.22)
Monitor ViewSonic VX2240w 22" 1680x1050
ASUS P8B75-V Intel B75 SATA 6Gb/s USB 3.0 (latest bios update)
HEC Cougar Evolution, 3 fans
PSU XFX Core Edition PRO550W

Another thing I do get this error randomly with other apps like Firefox 22 and Skype too which is strange. my S/N : 602-V260-050B1201119526.
This error is from Skype
Description
A problem caused this program to stop interacting with Windows.
Faulting Application Path:   C:\Windows\SysWOW64\WWAHost.exe
Problem signature
Problem Event Name:   MoAppHang
Package Full Name:   Microsoft.SkypeApp_1.8.0.111_x86__kzf8q xf38zg5c
Application Name:   praid:App
Application Version:   6.2.9200.16420
Application Timestamp:   505a90d6
Hang Signature:   d908
Hang Type:   2097152
OS Version:   6.2.9200.2.0.0.256.48
Locale ID:   2057
Additional Hang Signature 1:   d908164defd45e704df38cec71cdb6e9
Additional Hang Signature 2:   db7a
Additional Hang Signature 3:   db7a68a61e111f839b8a39fd0e33855c
Additional Hang Signature 4:   d908
Additional Hang Signature 5:   d908164defd45e704df38cec71cdb6e9
Additional Hang Signature 6:   db7a
Additional Hang Signature 7:   db7a68a61e111f839b8a39fd0e33855c
Description
A problem with your video hardware caused Windows to stop working correctly.
Problem signature
Problem Event Name:   LiveKernelEvent
OS Version:   6.2.9200.2.0.0.256.48
Locale ID:   2057
Files that help describe the problem
WD-20130626-0316-01.dmp
sysdata.xml
WERInternalMetadata.xml
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
Extra information about the problem
BCCode:   141
BCP1:   FFFFFA8007997010
BCP2:   FFFFF880069D42B0
BCP3:   0000000000000000
BCP4:   0000000000000150
OS Version:   6_2_9200
Service Pack:   0_0
Product:   256_1

List of hardware error codes

Hello,
Is there a list of hardware error codes that are generated when internal server systems fail? For example, on a T2000 when the CPU fan fails we get a message like this in the syslog:
Nov 4 09:34:49 systemx rmclomv: [ID 431010 kern.error] CPU_FAN @ MB.P0.F0.RS has FAILED.
Thanks,
mgb

Nope.
There is no such "list" of error codes.
Your log entry is telling you the information in clear (although abbreviated) text.
In the excerpt you provided, you can think of the `ID431010` as the 431,010th kernel error logged by the system. Such numbers start at some random low beginning and are accumulated sequentially by your system.
The log entry was plainly reporting on fan #0 for processor #0 located on the motherboard of hostname `systemx`as viewed from the perspective of LightsOutManager.
Fans will fail. Replace the part.

My iMac 8.1 was slowing down and had permissions problems. I backed everything up, and then re-installed. Now all I get is a black screen. Power+D gives me a hardware error message: HDD-1336. Help!

My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?

DonM. wrote:
Hi
Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
Cheers. Don
No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac or an Apple refurbished iMac to save money.

Is a Disk Utility "fatal hardware Error" Always fatal?

Help!
I'm traveling for the next four weeks and have my lap top with me to do work.
Last night I was working fine on my computer when all of a sudden Photoshop wouldn't open files right. I quite out of Photoshop (slow)
Then tried to quit out of everything else (slow) and finally shut down holding the Power button down. I waited a few minutes and tried to reboot.
It was REALLY slow starting back up. (about 15 to 20 minutes). I held the Power key down to turn it off and left it overnight hoping it would figure itself out by morning.
This am the same start up problem happened. I finally got it opened and manuvered to Disk Utility.
IT GAVE ME THIS MESSAGE
This drive has reported a Fatal Hardware Error to Disk utility.
If the drive has not failed completely, Back up as much as you can and
then replace it with a working drive.
HERE IS WHAT I DID EARLIER IN THE EVENING THAT I THINK MADE IT WACKY.
I hadn't installed SUITCASE X1 yet and was using the program Font Book that comes with the computer. It wasn't satifactory so I went ahead and installed Suitcase X1.
FONT BOOK kept showing a ton of open faces.
I carefully (or so I thought) went through Font Books "All fonts" window and got rid of fonts that I didn't see in the system fonts folder. (I think this is where I really may have screwed up)
FYI I am a graphic designer and use many fonts.
I store all the design fonts in a folder in USERS > SHARED> FONTS
I directed SUITCASE to "Manage system fonts"
Every thing was working fine for a few hours.
I was working in QUARK 6 easily and listening to a Podcast. No problems.
When I went to open PHOTOSHOP, it (Photoshop) started running very slow.
and all the things I mentioned above started to happen.
I have the OS10.4 install disk with me so I tried to boot from it.
(I thought maybe it had a utility on it to help fix things or maybe I could copy any important fonts that I accidently trased
(btw do you hold down OPTION C to boot from a CD or APPLE C?
I tried them all)
I couldn't get it to boot from the CD
Have I really wrecked my computer?
Do we think it's a font problem.
Can I fix it. I'm at the beach in NC and there's no techys around!!!!
I am currently typing this email on the laptop so it's not completely dead.
Just super slow and threatening to die.
What should I do??!!!
Did I mention today is my birthday?
PowerbookG4 Mac OS X (10.4.6)

It's either OPTION or C. Unfortunately, the Install CD doesn't give you much access to file operations (no Finder) as Mac OS 9 and earlier did.
If you could start it in Target Disk Mode and mount the drive on another Mac, or boot it from an external drive with a Mac OS X installation on it you could try to recover files that aren't already backed up.

Hardware error (Sense code23A00) - Now what should I do? Please advice...

Hello,
I would like to burn a new project to a DVD. Encore is giving me the following message over and over: "Encore was unable to complete the operation because of a hardware error (Sense Code 23A00). Contact the hardware manufacturer.
Please advise me what the best next step is I can take...
My version of Encore (CS3) sits on a Windows XP SP2 machine that is newly installed (last week) and still squeaky clean. I don't know who the manufacturer of the DVD-drive is. It worked fine before, and it works fine with other DVD0-burning software now (I know that doesn't mean a lot).
I use Imation DVD+RW discs. Before my clean install I had CS2 and it worked fine with these DVD's.
I have read the "Things and Software to avoid when authoring for DVD-V" document. None of the points there really seemed to matter to me (I don't have any of the identified problems, and use Nero software, which it does not reference). One point that does raise some questions is #14: "Disable the Windows XP packet writing utility": when I click on properties for the DVD-drive there is no Recording tab. Is that an indication of something that might be wrong? I have also searched these forums and read all the postings I could find on similar sounding messages.
It now seems I have three options. Which would you advise?
1. I can buy DVD's of another brandname, or not +RW. Interestingly enough, when I burn a DVD it goes through the process of acquiring all the data and checking transcoding settings, and then quits as soon as it really needs to start writing.
2. I can buy and install another DVD-burner. What brand would you advise?
3. I can tell Encore to create a DVD image ad then use Imgburn to burn said image to a DVD. Not a fan of this approach, I don't want to buy another program.
I can go any of these three roads. Perhaps there is a 4th option I have not thought of? I am kind of hoping someone will see my message and know exactly what the problem is... #1 is of course the easiest and cheapest option. Problem is none of the solutions guarantee success...
I would really appreciate any input you might be able to give me! Thanks in advance,
Rogier
Rotterdam | The Netherlands

>...and use Nero software, which it does not reference.
The
Things and Software to avoid when authoring for DVD-V
FAQ does mention Nero:
5. InCD: This is packet writing software that comes bundled with Ahead Nero Burning Rom. This package will load a packet-writing software that will constantly talk to your CD/DVD writer, and can cause a number of issues while trying to write a disc. Disabling this software is not enough, as a portion of this package is always running after you start windows. You will need to uninstall it in Add/Remove programs, then reboot to remove it.
If your installation of Nero didn't include its packet writing part then this doesn't apply obviously.
>...when I click on properties for the DVD-drive there is no Recording tab.
Could possibly be an indication that the drive isn't properly recognized by Windows. While you are in the Properties screen, what does it display as name for the drive?

Blue Screen of Death Hardware Error

Hi, i have a new laptop (2 months old) and i just got to school. After using my laptop for a little, i a have repeatedly got the BSOD message. I have already got it twice today. It says Windows has an uncorrectable hardware error.. Any information would be helpful, Thankyou!
Edit: i know how to get to the minidump files, i just dont understand what to do with them.
Also the stop code error is 0X0000007F in my most recent crash.(there is also a bunch of other numbers too) Please Help!

Turn OFF the Notebook and once its powered ON, keep Pressing F10 to load BIOS screen of the Notebook. In this screen under Diagnostics, run the test on hard drive and memory. Post back the results here.
Also in startup menu there is an alternate way where you can run F2 (System Diagnostics). The instructions can be found at below link
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01443317
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Hardware Error when burning DVD's

I keep getting an error message when burning DVD's using Toast Titanium on my iMac..it reads:
"Drive Reported an error, Sense key = hardware error, sense code = 0 x 03."
Twice after getting that message I couldn't continue to burn and it stopped, once it did continue to burn and finished successfully. Any ideas, anyone?
17" iMac G5 w/ iSight Mac OS X (10.4.3) upgraded to 1GB RAM

I get the same message today when burning from Toast 7.02 on my iMac. It happened when I was trying to make an audio CD from my iTunes collection (not when Copying from CD to CD). The exact message I got in the middle of my burn was:
The drive reported an error:
Sense Key = hardware Error
Sense Code = 0x03, 0x01
I tryed again with another CD and got the same thing. I never had a problem with these CD's (TDK CD-R up to 48x).
I wonder if there has to be some sort of software upgrade fro Roxio Toast or is this a superdrive malfunction/etc. My Superdrive gets very loud during this burn as well. I may take it in to Apple Genius Bar. Any ideas?

Windows 8.1 Installed now I received a Fatal Device Hardware Error

Windows 8.1 kept popping up to install update. I would refuse it. Then recently it updated itself. After that, i noticed it took a little longer for my laptop to boot. It would show a blue screen for a little bit then it would boot. Yesterday, I received an error (can't remember what it said) needed to restart because of an error. I ran the Hard Disk Test and Quick and then the extensive test. it stops at one sec remaining and noting happens. I did get a fatal device hardware error. Can the update to Windows 8.1 cause this to happen?
This question was solved.
View Solution.

Hi,
That's what it looks like to me too.
You may be able to find a replacement drive for your notebook from the HP Parts Store.
I worked on behalf of HP.

File permission error; NI-488: DMA hardware error detected

I'm running LabVIEW 8.0 on the latest supported SUSE linux. My vi saves a data file. If I save a file named "/home/bill/LabVIEW/data/file.dat," it saves okay the first time. But then if I run the program again, it gives me an error instead of just writing over file.dat (which is what I want it to do).
Error 8 occurred at Open/Create/Replace File in filename.vi
Possible reason(s):
LabVIEW: File permission error.
NI-488: DMA hardware error detected.
Also, I don't know if this is related, but when I click on the folder icon to the right of the file path on the front panel, and navigate to the directory mentioned above, then type "file.dat," I get the message "/home/bill/LabVIEW/data/file.dat does not exist." Shouldn't this *create* the new file?
Thanks,
Bill

You should really start your own thread describing your problem in detail. One of the issues here is that there are two possible sources for the error code 8. Which one is applicable to you? What platform are you on? What version of LV? What are you trying to accomplish? What exactly triggers the error?
Please start again with your own thread and with the answers the questions I asked (as well as anything else that you think might be of value).
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

I have a MacBook Pro, Matshita UJ-857E while recording music my drive reported an error: Sense Key=HARDWARE ERROR Sense Code=0x03,0x01 I have no idea what this means, and now my cd burner/player won't work. can someone help me fix this problem?

Please Help me. I am having problems with my MATSHITA UJ-857E DVD-R burner/writer. I burned 4 cd's and then it stopped working.
I can select my songs, and then it asks for a blank disc. It starts preparing to write the disc,then it says,"
The drive reported an error: Sense Key= HARDWARE ERROR Sense Code= 0x09,0x01 TRACKING SERVO FAILURE.
Can anyone give me some advice on how to fix it or what this means because I have no idea what it is talking about or how to begin to fix the problem?

tanyafrombakersfield wrote:
It starts preparing to write the disc,then it says,"
The drive reported an error: Sense Key= HARDWARE ERROR Sense Code= 0x09,0x01 TRACKING SERVO FAILURE.
This is an error reported by the optical drive's firmware. The tracking servo is the servomechanism which guides the laser pickup along the track on the optical disc. The error means that the servo couldn't do its job within the programmed parameters. What it doesn't say is why.
You have to be very precise as to when this error occurs. If it occurs as you wrote, while it "starts preparing to write the disc", and not when it has actually began to burn, then it's likely that the drive has gone bad and needs to be replaced.
There are other possibilities, so you should check them, but they would be more likely if the error occurred after the drive began to write. OrangeMarlin has suggested two options -- try a different brand of CD or DVD, and try cleaning the lens.

Disk Utility is reporting a fatal hardware error-S.M.A.R.T. status failing. Is there hope?

OS 10.5.8 on a 1.8 GHz Power PC G5. Installed Western Digital WD1002FAEX as a second internal hard drive. I also installd the jumper needed to slow HD down for this computer. Initialized and formated the HD was able to back up a large iPhoto file and am still able to acceass the file from the new HD. Now Disk Utility is reporting a fatal hardware error-S.M.A.R.T. status failing. Is there hope?

Is that on your first drive or the new one???
Only experience I had with SMART warning was that in less than 48 hrs it was dead for good.

Disk Utility Reporting Fatal Hardware Error

Hello all,
I woke up this morning to the flashing folder with a question mark in it on my MacBook. I know that that means the system can't find the OS so I assumed that my hard drive had magically failed overnight. So I turned my computer off and then rebooted and everything loaded properly. I went into Disk Utility and my main hard drive that has OS X on it is highlighted in red and when I click on it, Disk Utility only displays "This drive has reported a fatal hardware error to Disk Utility. If the drive has not failed completely, back up as much data as you can and then replace it with a working drive."
I have noticed EXTREMELY sluggish performance by my computer in these past two days which has required me to force quit programs and force shut down the system more times than I've had to in the whole time I've had this computer. Could this be a side effect of the failing drive?
I'm backing everything up right now, but I'm wondering how accurate Disk Utility is. The drive that I have in here is a non-Apple-installed 250 GB Western Digital that's been in here for nearly a year. Is it possible that the drive is failing beyond repair already? If so, is there any way to see the full extent of the damage and attempt to repair it before I go out and buy a new hard drive to replace it with?
Thanks for all the help and the fast responses!

Mateo wrote:
Hello all,
I woke up this morning to the flashing folder with a question mark in it on my MacBook. I know that that means the system can't find the OS so I assumed that my hard drive had magically failed overnight. So I turned my computer off and then rebooted and everything loaded properly. I went into Disk Utility and my main hard drive that has OS X on it is highlighted in red and when I click on it, Disk Utility only displays "This drive has reported a fatal hardware error to Disk Utility. If the drive has not failed completely, back up as much data as you can and then replace it with a working drive."
I have noticed EXTREMELY sluggish performance by my computer in these past two days which has required me to force quit programs and force shut down the system more times than I've had to in the whole time I've had this computer. Could this be a side effect of the failing drive?
yes, it could.
I'm backing everything up right now, but I'm wondering how accurate Disk Utility is. The drive that I have in here is a non-Apple-installed 250 GB Western Digital that's been in here for nearly a year. Is it possible that the drive is failing beyond repair already?
yes, it's quite possible.
If so, is there any way to see the full extent of the damage and attempt to repair it before I go out and buy a new hard drive to replace it with?
check the SMART status in disk utility as suggested. if it says anything but "verified" it means that the drive is expected to fail completely and you shouldn't try to repair it. If it says "verified" It's possible that reformatting will fix it so you can try that. this will wipe all the data on it so clone it off first as gbullman suggested. BTW, most drives come with manufacturers warranty longer than a year and you should be able to replace the drive. that's what I would recommend.
Thanks for all the help and the fast responses!

Errors randomly in my custom tooltip

Im getting these errors randomly in my custom tooltip:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at mx.managers::ToolTipManagerImpl/http://www.adobe.com/2006/flex/mx/internal::positionTip()[E:\dev\4.x\frameworks\projects\f ramework\src\mx\managers\ToolTipManagerImpl.as:1146]
    at mx.managers::ToolTipManagerImpl/http://www.adobe.com/2006/flex/mx/internal::targetChanged()[E:\dev\4.x\frameworks\projects \framework\src\mx\managers\ToolTipManagerImpl.as:852]
    at mx.managers::ToolTipManagerImpl/http://www.adobe.com/2006/flex/mx/internal::checkIfTargetChanged()[E:\dev\4.x\frameworks\p rojects\framework\src\mx\managers\ToolTipManagerImpl.as:744]
    at mx.managers::ToolTipManagerImpl/http://www.adobe.com/2006/flex/mx/internal::toolTipMouseOverHandler()[E:\dev\4.x\framework s\projects\framework\src\mx\managers\ToolTipManagerImpl.as:1565]
some of the tooltip:
<?xml version="1.0" encoding="utf-8"?>
<mx:Panel xmlns:fx="http://ns.adobe.com/mxml/2009" implements="mx.core.IToolTip"
          xmlns:s="library://ns.adobe.com/flex/spark"
          xmlns:mx="library://ns.adobe.com/flex/mx" layout="absolute" width="400" height="300">
    <fx:Declarations>
        
    </fx:Declarations>
    <fx:Script>
        <![CDATA[
            import mx.core.IToolTip;
            [Bindable]
            public var dataItem:Object;
            // Implement required methods of the IToolTip interface; these
            // methods are not used in this example, though.
            public var _text:String;
            public function get text():String {
                return _text;
            public function set text(value:String):void {
        ]]>
    </fx:Script>
    <mx:Image source="http://intranet/Intranet/EmployeeSearch/images/{dataItem.staffID}.jpg"/>
    <mx:Form paddingBottom="10" paddingLeft="10" paddingRight="10" paddingTop="10" verticalGap="1">
        <mx:FormItem label="Branch name">
            <mx:Label text="dataItem.NAME"/></mx:FormItem>
        <mx:FormItem label="Staff name">
            <mx:Label text="{dataItem.staffName}"/></mx:FormItem>
        <mx:FormItem label="Excessive Wait">
            <mx:Label text="{dataItem.wasExcessiveWait}"/></mx:FormItem>
        <mx:FormItem label="Eye contact">
            <mx:Label text="{dataItem.wasEyeContact}"/></mx:FormItem>
        <mx:FormItem label="Commission">
            <mx:Label text="{dataItem.commision}"/></mx:FormItem>
        <mx:FormItem label="Ex-Rate">
            <mx:Label text="{dataItem.exchangeRate}"/></mx:FormItem>
        <mx:FormItem label="Round up > £5">
            <mx:Label text="{dataItem.wasRoundUp}"/></mx:FormItem>
        <mx:FormItem label="Trade-up attempted">
            <mx:Label text="{dataItem.wasTradeUpAttempted}"/></mx:FormItem>
        <mx:FormItem label="Offered other products">
            <mx:Label text="{dataItem.OfferedOtherProducts}"/></mx:FormItem>
        <mx:FormItem label="Wallet offered">
            <mx:Label text="{dataItem.wasWallet}"/></mx:FormItem>
        <mx:FormItem label="Thank you">
            <mx:Label text="{dataItem.wasThankYou}"/></mx:FormItem>
        <mx:FormItem label="Wished Pleasant Trip/Day">
            <mx:Label text="{dataItem.wasWishedPleasantTrip}"/></mx:FormItem>
        <mx:FormItem label="Branch appearance">
            <mx:Label text="{dataItem.branchAppearance}"/></mx:FormItem>
        <mx:FormItem label="Customer service">
            <mx:Label text="{dataItem.customerService}"/></mx:FormItem>
        <mx:FormItem label="userID">
            <mx:Label text="{dataItem.userID}"/></mx:FormItem>
    </mx:Form>
</mx:Panel>

I got round it by doing this:
    <s:Label text="Data" id="Comment" >
                                                <s:toolTipCreate>
                                                    <![CDATA[
                                                    var toolTip:pa = new pa();
                                                    toolTip.dataItem = data;
                                                    event.toolTip = toolTip;
                                                    ]]>
                                                </s:toolTipCreate>
                                            </s:Label>

Reliability monitor reports hardware error

was going through my event viewer to try and find a glitch I've been having. came across an entry in the reliability viewer that has me concerned. excuse the mess below but your editor won't let me clean it up
Source
Windows
Summary
Hardware error
Date
10/16/2014 6:47 PM
Status
No solution available
Description
<dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir></dir></dir></dir></dir></dir><dir></dir></dir></dir></dir><dir><dir></dir></dir></dir></dir><dir><dir><dir></dir></dir></dir></dir></dir><dir><dir><dir><dir></dir></dir></dir></dir></dir></dir><dir><dir><dir><dir><dir></dir></dir></dir></dir></dir></dir></dir><dir><dir><dir><dir><dir><dir></dir></dir></dir></dir></dir></dir></dir></dir><dir><dir><dir><dir><dir><dir><dir></dir></dir></dir></dir></dir></dir></dir></dir><dir></dir></dir><dir></dir></dir><dir></dir></dir><dir></dir></dir><dir></dir></dir><dir></dir></dir><dir></dir></dir><dir></dir></dir><dir></dir></dir></dir></dir></dir></dir></dir></dir></dir></dir></dir></dir>
A problem with your hardware caused Windows to stop working correctly.
</dir>
Problem signature
<dir>
</dir><dir></dir><dir></dir><dir>
Problem Event Name: LiveKernelEvent
Code: 141
Parameter 1: ffffe000a23574d0
Parameter 2: fffff8010d748dac
Parameter 3: 0
Parameter 4: 33b8
OS version: 6_3_9600
Service Pack: 0_0
Product: 256_1
OS Version: 6.3.9600.2.0.0.256.48
Locale ID: 1033
</dir>

ZigZag3143x
28,210
Points
Top 0.5
ZigZag3143x
MCC, MVP
Joined Apr 2009
5
9
20
ZigZag3143x's threads
Show activity
I just deleted the post of the error file. When I posted it, it came up with a photo of a moon. Even though when I looked at it in onedrive it opened the log file. trying again.https://onedrive.live.com/redir?resid=2C896D862E3B4B36!6188&authkey=!ABHRn3oDiA7wdn8&ithint=file%2cevtx

Hardware error, random squares, rectangles

Similar Messages

Maybe you are looking for