Hardware req. running Apache with mod_plsql

I'm trying to find out hardware requirements for running an Apache server with mod_plsql on Windows NT/Windows2000 serving about 100 concurrent users. I've been redirected to "Oracle HTTP Server powered by Apache Performance Guide", but this document does not cover mod_plsql.
Any help out there?

Do you have installed the database in a separate machine?
If yes, Apache/mod_plsql running in standalone mode do not require a lot of memory.
Apache on windows NT platform uses only 2mb of ram, I don4t know how many memory uses mod_plsql, but IMO it uses the same memory like other mods of Apache.
Best regards, Marcelo.
PD: Look at the parameter of mod_plsql about the concurrent sessions accepted which by default is 10, you has to increase this value to 100. In the other hand, this parameter gets a database connection which you has to increase to 100 too.

Similar Messages

  • Running Apache with html files on a mounted NAS device

    Hi.  I am hoping someone could help me out.  I have been pulling my hair out for the past 2 days.
    I am running Arch v0.8.  I have very few packages installed -- I started with base install and added Apache, MySql, PHP, Samba and a few others.
    Configuration:
    - I have apache running as user=apache, group=apache.  I changed this from nobody:nobody in httpd.conf.
    - I have a Buffalo TerraStation on my lan.  It is called edge_nas.  It has a share called "linux".
    - I successfully mounted the Buffalo share using the following entry in fstab:
    //edge_nas/linux /mnt/edge_nas smbfs username=apache,password=theapachepassword,gid=apache 0 0
    - I created a soft link in /home which points /home/httpd to /mnt/edge_nas/home/httpd.
    - I want my web files on the Buffalo NAS device because it is raid 5. 
    Problem:
    - Root is able to read and write anywhere on /mnt/edge_nas.
    - Apache can read /mnt/edge_nas.
    - Apache can write in its home directory on /mnt/edge_nas/home/apache.
    - Apache cannot write in any other directory (especially /mnt/edge_nas/home/httpd/html).
    Question:
    - How do I grant apache read/write access to the html root?
    Any ideas?  Please be gentle.
    Thank you for your help.
    Edge

    cactus wrote:umm. still not clear on what you did...
    Please layout a clear step by step of what you did. That might make it easier to help you.
    Ok. From the top...
    On the Buffalo NAS (edge_nas):
    - I logged into the Buffalo web-based admin screen.
    - I created a new share called linux.
    - I created a new user called apache.
    - I granted read/write access to apache on the linux share.
    On Arch Linux:
    - I logged in locally as root.
    - I created a new user apache, in group apache.
    - I created a new directory called /mnt/edge_nas.
    - I mounted the Buffalo share using the following entry in fstab:
    //edge_nas/linux /mnt/edge_nas smbfs username=apache,password=theapachepassword,gid=apache 0 0
    - I changed apache to run as apache:apache.  I changed this from nobody:nobody in httpd.conf.
    - In /home/httpd, I created a softlink for /home/httpd/html, pointing it to /mnt/edge_nas/home/httpd/html.
    - I chmod 777 /mnt/edge_nas/home/httpd/html.
    - I restarted apache.
    - I created a summy index.html in that directory to ensure apache can see the mount.
    To test it out:
    - I logged into arch locally as my apache user.
    - I cd'ed to /home/httpd/html.
    - I tried to create a new text file with vi.
    - I cannot open the text file for write.
    I hope that helps.  Please excuse any misuse of terminology.
    Thanks.
    Edge

  • Running Apache with wdbcgi

    Hi,
    I'm trying out apache as a replacement for wdblsnr, followed the (scarce) instructions, but get an error accessing pl/sql - it seems wdbcgi can't find the DAD; is there something I'm forgetting? This is webdb 2.2 on linux.
    Thanks in advance
    Paulo

    Not sure I completely follow what you have written here. With our 904 release, we now support the use of our mod_oc4j Apache module with a generic Apache installation. It's documented in the HTTP server administration guide -- give that a try.
    -steve-

  • Running Apache with Weblogic

    We are currently migrating our site from NetDynamics to Weblogic Server.
              In our current implementation we have three virtual host set up in Apache
              Web server
              and now these needs to talk to Weblogic for processing JSP/Servet request.
              Now my question is I still want to use the same three virtual host to talk
              to the default server setup in Weblogic.
              All three virtual host points to different directories. How do I setup
              Weblogic so that the same server can process
              request from the three virtual hosts.
              Thanks,
              Rakesh
              

    You will have to do something like the foll in your httpd.conf file:
              <IfModule mod_weblogic.c>
              WebLogicCluster "one:7001,two:7001,three:7001"
              </IfModule>
              NameVirtualHost 172.17.8.5
              <VirtualHost goldengate1.mydomain.com>
              PathTrim /weblogic1
              </VirtualHost>
              <VirtualHost goldengate2.mydomain.com>
              PathTrim /weblogic2
              </VirtualHost>
              In the above configuration both the virtual hosts will point to the
              same Cluster.
              --Vinod.
              Rakesh Gupta wrote:
              > We are currently migrating our site from NetDynamics to Weblogic Server.
              >
              > In our current implementation we have three virtual host set up in Apache
              > Web server
              > and now these needs to talk to Weblogic for processing JSP/Servet request.
              > Now my question is I still want to use the same three virtual host to talk
              > to the default server setup in Weblogic.
              > All three virtual host points to different directories. How do I setup
              > Weblogic so that the same server can process
              > request from the three virtual hosts.
              >
              > Thanks,
              >
              > Rakesh
              

  • Minimum Hardware req of SUN Solaris with ECC 6.0

    hi all
    can anyone tell me what is minimum requirement of hardware of SUN Solaris with ECC 6.0
    i serach out in marketplace but didn't get the answer.
    so any one can solve my problem
    rgds
    aftab

    Hi Aftab,
    Once you finish with Sizing and always recomended you contact SAP-SUN Competent Center with your Quick Sizer Project reference.  They will always help you to do the final sizing..
    Check the following links
    https://websmp210.sap-ag.de/quicksizing
    http://www.saponsolaris.com
    Hope these info. will help in this regards.
    Regards
    Rayees Palot

  • Hardware req.

    I am just about to replace my current oracle software with an 8i database combined with designer 6i and the Forms/Reports developer server software with Webdb 2.2.
    I've managed to chew through most of the install documentation.
    But is there anybody out there with experience of having all these products on the same box with respect to minimum hardware reqs and performance.
    My laptop is running on NT 4.0 sp6 and after removing all the present oracle software I should have +/- 3.5 gB free space on my HD partition. There is a 465 pentium CPU with 128 mB RAM installed.
    I read that if you make use of some of the java functionality in 8i, 256mB Ram is required and the same for some of the extra functionality in designer(e.a dependency manager).
    Should I think about upgrading the memory first...?
    Any suggestions would be appreciated.
    Regards
    Dave.

    Do you have installed the database in a separate machine?
    If yes, Apache/mod_plsql running in standalone mode do not require a lot of memory.
    Apache on windows NT platform uses only 2mb of ram, I don4t know how many memory uses mod_plsql, but IMO it uses the same memory like other mods of Apache.
    Best regards, Marcelo.
    PD: Look at the parameter of mod_plsql about the concurrent sessions accepted which by default is 10, you has to increase this value to 100. In the other hand, this parameter gets a database connection which you has to increase to 100 too.

  • What do I need for Oracle Http Server with mod_plsql on Linux 64bit?

    I am trying to get the OHS onto a linux box but I am not quite sure I am installing the correct thing!!
    I currently have a windows box running the 10g Application server but everything seems to have changed since then and there seems to be several different things to do with the Fusion Middleware and stuff. I've tried to find an overview in plain english of what all these things are but all I can find are lots of marketing buzzwords!
    All in need to to be able to run the OHS with the mod_plsql so I can run my apex application. I'd be greatfull if someone could point me in the right direction for what I need to install!
    The box it is going on is a CentOS Linux 64bit machine. I've download and installed Oracle WebLogic Server 11g Rel 1 (10.3.3) using the generic installer for the 64 bit java but there seems to be no http server despite it saying there is! Most likely I am doing something wrong but the installer finishes successfully but nothing is running on port 7001.
    Do I actually need the WebTier instead? Is that the best solution for running the OHS with mod_plsql? Do I need the WebLogic install as well? Unfortunately I am fairly new to Linux as well which isn't helping!!
    thanks for any help
    Robert

    Well, you have two options:
    - Use the OHS from the OFM WebTier Utilities distro. (To use 11.1.1.3 version, you need both the 11.1.1.2 and 11.1.1.3 distros)
    - Use the OHS from the DB Companion Disk distro.
    WebLogic Server is a Java EE application with an HTTP server included, but not intended to be used as a replacement of OHS/Apache. It doesn't support mod's...
    HTH,
    --olaf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Mac running slow with Yosemite

    Mac Running slow with Yosemite install.
    report is below.  Now what do I do?   Thanks Stu
    Problem description:
    Mac running very slow after Yosemite install.  Wheel turns almost all the time
    EtreCheck version: 2.0.11 (98)
    Report generated November 7, 2014 at 10:14:41 AM PST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.7 GHz Intel Core i7 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 14:53:8
    Disk Information: ℹ️
      Hitachi HTS547550A9E384 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 498.88 GB (343.70 GB free)
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.seagate.driver.PowSecDriverCore (5.2.3 - SDK 10.4) Support
      /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.3 - SDK 10.4) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.3 - SDK 10.5) Support
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.3 - SDK 10.4) Support
    Problem System Launch Agents: ℹ️
      [failed] com.apple.AirPlayUIAgent.plist
      [failed] com.apple.bird.plist
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.CallHistorySyncHelper.plist
      [failed] com.apple.coreservices.appleid.authentication.plist
      [failed] com.apple.coreservices.uiagent.plist
      [failed] com.apple.EscrowSecurityAlert.plist
      [failed] com.apple.icloud.fmfd.plist
      [failed] com.apple.nsurlsessiond.plist
      [failed] com.apple.pluginkit.pkd.plist
      [failed] com.apple.recentsd.plist
      [failed] com.apple.SafariNotificationAgent.plist
      [failed] com.apple.sbd.plist
      [failed] com.apple.scopedbookmarkagent.xpc.plist
      [failed] com.apple.security.cloudkeychainproxy.plist
      [failed] com.apple.spindump_agent.plist
      [failed] com.apple.syncdefaultsd.plist
      [failed] com.apple.telephonyutilities.callservicesd.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.awdd.plist
      [failed] com.apple.cache_delete.plist
      [failed] com.apple.ctkd.plist
      [failed] com.apple.icloud.findmydeviced.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.MobileFileIntegrity.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.nsurlsessiond.plist
      [failed] com.apple.periodic-daily.plist
      [failed] com.apple.periodic-weekly.plist
      [failed] com.apple.smbd.plist
      [failed] com.apple.softwareupdated.plist
      [failed] com.apple.spindump.plist
      [failed] com.apple.tccd.system.plist
      [failed] com.apple.wdhelper.plist
    Launch Agents: ℹ️
      [loaded] com.oracle.java.Java-Updater.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [loaded] com.sonos.smbbump.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.google.keystone.agent.plist Support
    User Login Items: ℹ️
      iTunesHelper UNKNOWNHidden (missing value)
      Dropbox Application (/Applications/Dropbox.app)
      AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Internet Plug-ins: ℹ️
      Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User Internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 7.1 Support
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 498.88 GB Disk used: 155.18 GB
      Destinations:
      Seagate Backup Plus Drive [Local]
      Total size: 3.00 TB
      Total number of backups: 106
      Oldest backup: 2012-07-30 21:42:20 +0000
      Last backup: 2014-11-07 07:42:37 +0000
      Size of backup disk: Excellent
      Backup size 3.00 TB > (Disk size 498.88 GB X 3)
    Top Processes by CPU: ℹ️
          12% mds
          6% WindowServer
          0% Dropbox
          0% AppleSpell
          0% fontd
    Top Processes by Memory: ℹ️
      90 MB Safari
      34 MB WindowServer
      26 MB mds
      26 MB cloudd
      21 MB soagent
    Virtual Memory Information: ℹ️
      64 MB Free RAM
      766 MB Active RAM
      721 MB Inactive RAM
      1.13 GB Wired RAM
      18.26 GB Page-ins
      120 MB Page-outs

    my mac is also running very slowly with that spinning beach ball constantly making its unwanted presence felt. i've tried the following so far:
    - safe boot
    - cleared items from Users / Groups | Login
    - checked Activity Monitor to remove any processes in red
    - run disk verify
    - reinstalled the OS X
    here is the output from my EtreCheck ...
    Problem description:
    mac running very slowly with yosemite
    EtreCheck version: 2.1.8 (121)
    Report generated 8 March 2015 1:41:06 pm AEDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Late 2012) (Technical Specifications)
        iMac - model: iMac13,2
        1 2.9 GHz Intel Core i5 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 0/DIMM1
                Empty  
            BANK 1/DIMM1
                Empty  
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        NVIDIA GeForce GTX 660M - VRAM: 512 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:8:1
    Disk Information: ℹ️
        APPLE HDD ST1000DM003 disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (737.74 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Apogee Duet USB
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. MacBook Air SuperDrive
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/AirParrot.app
        [not loaded]    com.squirrels.airparrot.framebuffer (3 - SDK 10.7) [Click for support]
        [not loaded]    com.squirrels.driver.AirParrotSpeakers (1.7 - SDK 10.7) [Click for support]
            /Library/Extensions
        [not loaded]    com.apogeedigital.kext.ApogeeUSBDuetAudio (1.0.0a1 - SDK 10.9) [Click for support]
            /System/Library/Extensions
        [loaded]    com.Cycling74.driver.Soundflower (1.5.1) [Click for support]
        [not loaded]    com.pctools.iantivirus.kfs (1.0.1) [Click for support]
    Launch Agents: ℹ️
        [running]    com.ApogeePopup.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [running]    com.DuetUSBDaemon.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    jp.co.canon.MasterInstaller.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.facebook.videochat.[redacted].plist [Click for support]
    User Login Items: ℹ️
        None
    Internet Plug-ins: ℹ️
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 25 Check version
        Default Browser: Version: 600 - SDK 10.10
    Safari Extensions: ℹ️
        "Duplicate Tab" Button
        Exposer
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 999.35 GB Disk used: 261.60 GB
        Destinations:
            Data [Network]
            Total size: 2.00 TB
            Total number of backups: 53
            Oldest backup: 2014-05-24 09:36:55 +0000
            Last backup: 2015-03-07 02:24:42 +0000
            Size of backup disk: Adequate
                Backup size 2.00 TB > (Disk used 261.60 GB X 3)
    Top Processes by CPU: ℹ️
             9%    cloudd
             2%    WindowServer
             0%    backupd
             0%    cloudpaird
    Top Processes by Memory: ℹ️
        258 MB    Living Earth Desktop
        180 MB    cloudd
        86 MB    Finder
        69 MB    ocspd
        52 MB    Preview
    Virtual Memory Information: ℹ️
        16 MB    Free RAM
        1.67 GB    Active RAM
        6.19 GB    Inactive RAM
        710 MB    Wired RAM
        77.72 GB    Page-ins
        7 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 8, 2015, 01:25:39 PM    Self test - passed
        Mar 7, 2015, 03:24:57 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Pages_2015-03-07-152457_[redac ted].crash
        Mar 5, 2015, 10:20:58 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/cloudd_2015-03-05-222058_[reda cted].crash
        Mar 5, 2015, 10:14:51 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/cloudd_2015-03-05-221451_[reda cted].crash
        Mar 5, 2015, 10:14:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/cloudd_2015-03-05-221442_[reda cted].crash

  • [FIXED] Compiz runs only with emerald and crashes with metacity

    Hey,
    I currently try to use a metacity theme and have compiz enabled but apparently that's something compiz doesn't really like.
    One think i noticed in fusion-icon is that the entire metacity option under: "Select Window Devorator" is just not there.. (or was that always the case?)
    Oke, things i have done so far:
    - Search this forum (obviously) nothing found with a solution
    - Searched the wiki (same results)
    - in gconf-editor /desktop/gnome/session/required_components/windowmanager set to compiz (like said in the Compiz wiki page on archlinux.org
    - disabled metacity as compositing manager (tried with enabled as well but the same results)
    - right now i have the compiz bash script from ubuntu (tweaked a little) and that starts up compiz just fine but not with metacity
    And incase you want the script:
    #!/bin/sh
    # Compiz Manager wrapper script
    # Copyright (c) 2007 Kristian Lyngstøl <[email protected]>
    # This program is free software; you can redistribute it and/or modify
    # it under the terms of the GNU General Public License as published by
    # the Free Software Foundation; either version 2 of the License, or
    # (at your option) any later version.
    # This program is distributed in the hope that it will be useful,
    # but WITHOUT ANY WARRANTY; without even the implied warranty of
    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    # GNU General Public License for more details.
    # You should have received a copy of the GNU General Public License
    # along with this program; if not, write to the Free Software
    # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
    # Contributions by: Treviño (3v1n0) <[email protected]>, Ubuntu Packages
    # Much of this code is based on Beryl code, also licensed under the GPL.
    # This script will detect what options we need to pass to compiz to get it
    # started, and start a default plugin and possibly window decorator.
    COMPIZ_BIN_PATH="/usr/bin/" # For window decorators and compiz
    PLUGIN_PATH="/usr/lib/compiz/"
    GLXINFO="/usr/bin/glxinfo"
    KWIN="/usr/bin/kwin"
    METACITY="/usr/bin/metacity"
    XFWM="/usr/bin/xfwm"
    COMPIZ_NAME="compiz" # Final name for compiz (compiz.real)
    # For Xgl LD_PRELOAD
    LIBGL_NVIDIA="/usr/lib/nvidia/libGL.so.1.2.xlibmesa"
    LIBGL_FGLRX="/usr/lib/fglrx/libGL.so.1.2.xlibmesa"
    # Minimum amount of memory (in kilo bytes) that nVidia cards need
    # to be allowed to start
    # Set to 262144 to require 256MB
    NVIDIA_MEMORY="65536" # 64MB
    NVIDIA_SETTINGS="nvidia-settings" # Assume it's in the path by default
    # For detecting what driver is in use, the + is for one or more /'s
    XORG_DRIVER_PATH="/usr/lib/xorg/modules/drivers/+"
    FALLBACKWM="xterm"
    if [ x"$KDE_FULL_SESSION" = x"true" ]; then
    FALLBACKWM="${KWIN}";
    elif [ x"$GNOME_DESKTOP_SESSION_ID" != x"" ]; then
    FALLBACKWM="${METACITY}"
    elif xprop -root _DT_SAVE_MODE | grep ' = \"xfce4\"$' >/dev/null 2>&1; then
    FALLBACKWM="${XFWM}"
    fi
    FALLBACKWM_OPTIONS="--replace $@"
    # Driver whitelist
    WHITELIST="nvidia intel ati radeon i810 fglrx"
    # blacklist based on the pci ids
    # See http://wiki.compiz-fusion.org/Hardware/Blacklist for details
    #T=" 1002:5954 1002:5854 1002:5955" # ati rs480
    #T="$T 1002:4153" # ATI Rv350
    #T="$T 8086:2982 8086:2992 8086:29a2 8086:2a02 8086:2a12" # intel 965
    T="$T 8086:2a02 " # Intel GM965
    T="$T 8086:3577 8086:2562 " # Intel 830MG, 845G (LP: #259385)
    BLACKLIST_PCIIDS="$T"
    unset T
    COMPIZ_OPTIONS="--ignore-desktop-hints --replace"
    COMPIZ_PLUGINS="core"
    ENV=""
    # Use emerald by default if it exist
    USE_EMERALD="yes"
    # No indirect by default
    INDIRECT="no"
    # Default X.org log if xset q doesn't reveal it
    XORG_DEFAULT_LOG="/var/log/Xorg.0.log"
    # Set to yes to enable verbose
    VERBOSE="yes"
    # Echos the arguments if verbose
    verbose()
    if [ "x$VERBOSE" = "xyes" ]; then
    printf "$*"
    fi
    # abort script and run fallback windowmanager
    abort_with_fallback_wm()
    if [ "x$SKIP_CHECKS" = "xyes" ]; then
    verbose "SKIP_CHECKS is yes, so continuing despite problems.\n"
    return 0;
    fi
    if [ "x$CM_DRY" = "xyes" ]; then
    verbose "Dry run failed: Problems detected with 3D support.'n"
    exit 1;
    fi
    verbose "aborting and using fallback: $FALLBACKWM \n"
    if [ -x $FALLBACKWM ]; then
    exec $FALLBACKWM $FALLBACKWM_OPTIONS
    else
    printf "no $FALLBACKWM found, exiting\n"
    exit 1
    fi
    # Check if we run with the Software Rasterizer, this happens e.g.
    # when a second screen session is opened via f-u-a on intel
    check_software_rasterizer()
    verbose "Checking for Software Rasterizer: "
    if glxinfo 2> /dev/null | egrep -q '^OpenGL renderer string: Software Rasterizer' ; then
    verbose "present. \n";
    return 0;
    else
    verbose "Not present. \n"
    return 1;
    fi
    # Check for non power of two texture support
    check_npot_texture()
    verbose "Checking for non power of two support: "
    if glxinfo 2> /dev/null | egrep -q '(GL_ARB_texture_non_power_of_two|GL_NV_texture_rectangle|GL_EXT_texture_rectangle|GL_ARB_texture_rectangle)' ; then
    verbose "present. \n";
    return 0;
    else
    verbose "Not present. \n"
    return 1;
    fi
    # Check for presence of FBConfig
    check_fbconfig()
    verbose "Checking for FBConfig: "
    if [ "$INDIRECT" = "yes" ]; then
    $GLXINFO -i | grep -q GLX.*fbconfig
    FB=$?
    else
    $GLXINFO | grep -q GLX.*fbconfig
    FB=$?
    fi
    if [ $FB = "0" ]; then
    unset FB
    verbose "present. \n"
    return 0;
    else
    unset FB
    verbose "not present. \n"
    return 1;
    fi
    # Check for TFP
    check_tfp()
    verbose "Checking for texture_from_pixmap: "
    if [ $($GLXINFO 2>/dev/null | grep -c GLX_EXT_texture_from_pixmap) -gt 2 ] ; then
    verbose "present. \n"
    return 0;
    else
    verbose "not present. \n"
    if [ "$INDIRECT" = "yes" ]; then
    unset LIBGL_ALWAYS_INDIRECT
    INDIRECT="no"
    return 1;
    else
    verbose "Trying again with indirect rendering:\n";
    INDIRECT="yes"
    export LIBGL_ALWAYS_INDIRECT=1
    check_tfp;
    return $?
    fi
    fi
    # Check wether the composite extension is present
    check_composite()
    verbose "Checking for Composite extension: "
    if xdpyinfo -queryExtensions | grep -q Composite ; then
    verbose "present. \n";
    return 0;
    else
    verbose "not present. \n";
    return 1;
    fi
    # Detects if Xgl is running
    check_xgl()
    verbose "Checking for Xgl: "
    if xvinfo | grep -q Xgl ; then
    verbose "present. \n"
    return 0;
    else
    verbose "not present. \n"
    return 1;
    fi
    # Check if the nVidia card has enough video ram to make sense
    check_nvidia_memory()
    if [ ! -x "$NVIDIA_SETTINGS" ]; then
    return 0
    fi
    MEM=$(${NVIDIA_SETTINGS} -q VideoRam | egrep Attribute\ \'VideoRam\'\ .*: | cut -d: -f3 | sed 's/[^0-9]//g')
    if [ $MEM -lt $NVIDIA_MEMORY ]; then
    verbose "Less than ${NVIDIA_MEMORY}kb of memory and nVidia";
    return 1;
    fi
    return 0;
    # Check for existence if NV-GLX
    check_nvidia()
    if [ ! -z $NVIDIA_INTERNAL_TEST ]; then
    return $NVIDIA_INTERNAL_TEST;
    fi
    verbose "Checking for nVidia: "
    if xdpyinfo | grep -q NV-GLX ; then
    verbose "present. \n"
    NVIDIA_INTERNAL_TEST=0
    return 0;
    else
    verbose "not present. \n"
    NVIDIA_INTERNAL_TEST=1
    return 1;
    fi
    # Check if the max texture size is large enough compared to the resolution
    check_texture_size()
    # Check how many screens we've got and iterate over them
    N=$(xdpyinfo | grep -i "number of screens" | sed 's/.*[^0-9]//g')
    for i in $(seq 1 $N); do
    verbose "Checking screen $i"
    TEXTURE_LIMIT=$(glxinfo -l | grep GL_MAX_TEXTURE_SIZE | sed -n "$i s/^.*=[^0-9]//g p")
    RESOLUTION=$(xdpyinfo | grep -i dimensions: | sed -n -e "$i s/^ *dimensions: *\([0-9]*x[0-9]*\) pixels.*/\1/ p")
    VRES=$(echo $RESOLUTION | sed 's/.*x//')
    HRES=$(echo $RESOLUTION | sed 's/x.*//')
    verbose "Comparing resolution ($RESOLUTION) to maximum 3D texture size ($TEXTURE_LIMIT): ";
    if [ $VRES -gt $TEXTURE_LIMIT ] || [ $HRES -gt $TEXTURE_LIMIT ]; then
    verbose "Failed.\n"
    return 1;
    fi
    verbose "Passed.\n"
    done
    return 0
    # check driver whitelist
    running_under_whitelisted_driver()
    LOG=$(xset q|grep "Log file"|awk '{print $3}')
    if [ "$LOG" = "" ]; then
    verbose "xset q doesn't reveal the location of the log file. Using fallback $XORG_DEFAULT_LOG \n"
    LOG=$XORG_DEFAULT_LOG;
    fi
    if [ -z "$LOG" ];then
    verbose "AIEEEEH, no Log file found \n"
    verbose "$(xset q) \n"
    return 0
    fi
    for DRV in ${WHITELIST}; do
    if egrep -q "Loading ${XORG_DRIVER_PATH}${DRV}_drv\.so" $LOG &&
    ! egrep -q "Unloading ${XORG_DRIVER_PATH}${DRV}_drv\.so" $LOG;
    then
    return 0
    fi
    done
    verbose "No whitelisted driver found\n"
    return 1
    # check pciid blacklist
    have_blacklisted_pciid()
    OUTPUT=$(lspci -n)
    for ID in ${BLACKLIST_PCIIDS}; do
    if echo "$OUTPUT" | egrep -q "$ID"; then
    verbose "Blacklisted PCIID '$ID' found \n"
    return 0
    fi
    done
    OUTPUT=$(lspci -vn | grep -i VGA)
    verbose "Detected PCI ID for VGA: $OUTPUT\n"
    return 1
    build_env()
    if check_nvidia; then
    ENV="__GL_YIELD=NOTHING "
    fi
    if [ "$INDIRECT" = "yes" ]; then
    ENV="$ENV LIBGL_ALWAYS_INDIRECT=1 "
    fi
    if check_xgl; then
    if [ -f ${LIBGL_NVIDIA} ]; then
    ENV="$ENV LD_PRELOAD=${LIBGL_NVIDIA}"
    verbose "Enabling Xgl with nVidia drivers...\n"
    fi
    if [ -f ${LIBGL_FGLRX} ]; then
    ENV="$ENV LD_PRELOAD=${LIBGL_FGLRX}"
    verbose "Enabling Xgl with fglrx ATi drivers...\n"
    fi
    fi
    ENV="$ENV FROM_WRAPPER=yes"
    if [ -n "$ENV" ]; then
    export $ENV
    fi
    build_args()
    if [ "x$INDIRECT" = "xyes" ]; then
    COMPIZ_OPTIONS="$COMPIZ_OPTIONS --indirect-rendering "
    fi
    if [ ! -z "$DESKTOP_AUTOSTART_ID" ]; then
    COMPIZ_OPTIONS="$COMPIZ_OPTIONS --sm-client-id $DESKTOP_AUTOSTART_ID"
    fi
    if check_nvidia; then
    if [ "x$INDIRECT" != "xyes" ]; then
    COMPIZ_OPTIONS="$COMPIZ_OPTIONS --loose-binding"
    fi
    fi
    # Execution begins here.
    # Read configuration from XDG paths
    if [ -z "$XDG_CONFIG_DIRS" ]; then
    test -f /etc/xdg/compiz/compiz-manager && . /etc/xdg/compiz/compiz-manager
    for f in /etc/xdg/compiz/compiz-manager.d/*; do
    test -e $f && . $f
    done
    else
    OLD_IFS=$IFS
    IFS=:
    for CONFIG_DIR in $XDG_CONFIG_DIRS
    do
    test -f $CONFIG_DIR/compiz/compiz-manager && . $CONFIG_DIR/compiz/compiz-manager
    for f in $CONFIG_DIRS/compiz/compiz-manager.d/*; do
    test -e $f && . $f
    done
    done
    IFS=$OLD_IFS
    unset OLD_IFS
    fi
    if [ -z "$XDG_CONFIG_HOME" ]; then
    test -f $HOME/.config/compiz/compiz-manager && . $HOME/.config/compiz/compiz-manager
    else
    test -f $XDG_CONFIG_HOME/compiz/compiz-manager && . $XDG_CONFIG_HOME/compiz/compiz-manager
    fi
    # Don't use compiz when running the failsafe session
    if [ "x$GNOME_DESKTOP_SESSION_ID" = "xFailsafe" ]; then
    abort_with_fallback_wm
    fi
    if [ "x$LIBGL_ALWAYS_INDIRECT" = "x1" ]; then
    INDIRECT="yes";
    fi
    # if we run under Xgl, we can skip some tests here
    if ! check_xgl; then
    # if vesa or vga are in use, do not even try glxinfo (LP#119341)
    if ! running_under_whitelisted_driver || have_blacklisted_pciid; then
    abort_with_fallback_wm
    fi
    # check if we have the required bits to run compiz and if not,
    # fallback
    if ! check_tfp || ! check_npot_texture || ! check_composite || ! check_texture_size; then
    abort_with_fallback_wm
    fi
    # check if we run with software rasterizer and if so, bail out
    if check_software_rasterizer; then
    verbose "Software rasterizer detected, aborting"
    abort_with_fallback_wm
    fi
    if check_nvidia && ! check_nvidia_memory; then
    abort_with_fallback_wm
    fi
    if ! check_fbconfig; then
    abort_with_fallback_wm
    fi
    fi
    # load the ccp plugin if present and fallback to plain gconf if not
    if [ -f ${PLUGIN_PATH}libccp.so ]; then
    COMPIZ_PLUGINS="$COMPIZ_PLUGINS ccp"
    elif [ -f ${PLUGIN_PATH}libgconf.so ]; then
    COMPIZ_PLUGINS="$COMPIZ_PLUGINS glib gconf"
    fi
    # enable gnomecompat if we run under gnome
    if [ x"$GNOME_DESKTOP_SESSION_ID" != x"" ] && [ ! -e ~/.compiz-gnomecompat ]; then
    verbose "running under gnome seesion, checking for gnomecompat\n"
    if ! gconftool -g /apps/compiz/general/allscreens/options/active_plugins|grep -q gnomecompat; then
    verbose "adding missing gnomecompat\n"
    V=$(gconftool -g /apps/compiz/general/allscreens/options/active_plugins|sed s/mousepoll,/mousepoll,gnomecompat,/)
    if ! echo $V|grep -q gnomecompat; then
    verbose "can not add gnomecompat, reseting\n"
    gconftool --unset /apps/compiz/general/allscreens/options/active_plugins
    else
    gconftool -s /apps/compiz/general/allscreens/options/active_plugins --type list --list-type=string $V
    fi
    touch ~/.compiz-gnomecompat
    fi
    fi
    # get environment
    build_env
    build_args
    if [ "x$CM_DRY" = "xyes" ]; then
    verbose "Dry run finished: everything should work with regards to Compiz and 3D.\n"
    verbose "Execute: ${COMPIZ_BIN_PATH}${COMPIZ_NAME} $COMPIZ_OPTIONS "$@" $COMPIZ_PLUGINS \n"
    exit 0;
    fi
    ${COMPIZ_BIN_PATH}${COMPIZ_NAME} $COMPIZ_OPTIONS "$@" $COMPIZ_PLUGINS || exec $FALLBACKWM $FALLBACKWM_OPTIONS
    That's it so far.
    So again what i try to do is running compiz with metacity decorations.
    I hope someone can help me here,
    Mark.
    Last edited by markg85 (2009-06-28 00:26:04)

    whoops wrote:
    Wait, what, I thought metacity isn't as window decorator, it is a window manager, right? I don't really get what you're trying to do... maybe install compiz-decorator-gtk and use it instead of emerald?
    edit: aaah, yes, I think you're missing compiz-decorator-gtk, try that, look at fusion icon "window decorator" option again.
    Strange.. i was under the impression that pacman -S compiz-fusion would install GTK and QT decorators... guess not.
    This issue is fixed now. Running metacity decorations now WITH compiz.

  • Running Apache, question about spiders and bots

    I'm running Apache and set up a php traffic analzyer. I see that bots and spiders are able to track pages and directories which are not at all linked on any page. How on earth do they figure out my directory structure? And how do I stop it, it makes me uneasy (tried metatags, this only stops them from posting the content). Any help would be appreciated, thanks ahead,
    jskier

    Some robots (or spiders) simply guess typical names. But I think all adhere to
    http://www.robotstxt.org/wc/robots.html (or simply plug robots.txt into google - you'll find a lot)
    or was that what you meant with meta-tags ?
    The next thing you can do is look into possibilities listed on :
    http://httpd.apache.org/docs/howto/auth.html
    especially "access control". If you only skim over this page ;-), here is an important snippet :
    These directives may be placed in a .htaccess file in the particular directory being protected, or may go in the main server configuration file, in a <Directory> section, or other scope container.
    But other than that : not linking pages or not showing info does not protect you in any way, and the web is not designed to be that way.

  • I have an imac g4 purchased Dec 2003 runnung OS 10.5.8.  It runs fine with airport off, but when I turn airport on it freezes with the black page,  "restart by holding power key . . ."  I swapped the airport extreme card with the one in my ibook G4 (purch

    i have an imac g4 purchased Dec 2003 runnung OS 10.5.8.  It runs fine with airport off, but when I turn airport on it freezes with the black page,  "restart by holding power key . . ."  I swapped the airport extreme card with the one in my ibook G4 (purchased same date and running same OS).  No change in operation.
    I am running wifi from verizon.  Recently changed from mifi2200 to jetpak 4620 in a 3G location.  Ibook running fine, desktop freezes.  If I can boot desktop in safe mode and get airport turned off in time. then I can reboot regularly and imac runs flawlessly with no wireless.Have run disk utilities and TechTool Pro rebuild etc, but nothing has worked.  How do I fine the culprit?

    the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
    That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
    We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
    I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
    After all, the component or software could only be tested as far as the current OS version when the component or software was released.
    Beyond that, we are all "beta testing".
    Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
    After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
    Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
    I wish they would include the latest pkgs at least with software update.
    Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
    This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
    In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
    Until then, I'll leave Software Update disabled.......

  • Should I upgrade to Macericks now from 10.6.8 on my i-Mac(mid 2007, core 2 duo?). Will Mavericks be more secure than 10.6.8 ? 10.6.8 has been great, it runs great with all my apps but am concerned about future supportibility?

    Should I upgrade to Mavericks now from 10.6.8 (i-Mac, mid 2007, core 2 duo)? Will Mavericks be more secure than 10.6.8 ?  I have the latest version of 10.6.8 and have upgraded my memory to 4GB. This could be one reason for me to make the move now.
    10.6.8 has been great, it runs great with all my apps but am concerned about lack of support now. I know my PC apps will not work but maybe some apps that work now will "walk away" from 10.6.8 and then there's the security question of above.
    I am also concerned about iPhoto 9 transition to i-Photo 11 and compatibility of my Time Machine WD Passport HD (format: Mac OS Extended (Journaled) based on several questions in applicable forums.
    Thanks for your help in this important decision!

    If I were you I would stick with Snow Leopard. It's much better suited to your old hardware. That said:
    Upgrading from Snow Leopard to Lion or Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • Adv. of using apache with tomcat??

    can anyone pl tell me the advantages of using Apache with Tomcat in comarison to other web servers?
    Thanks

    The biggest advantages are that they are open source, so you don't have to pay a huge licence fee, and they are very stable. I don't know how they compare for speed - I know Apache is lightning when it comes to serving flat pages, there are no benchmarks yet for the new Tomcat because it was only released last monday. You can run them on linux or another unix variant, so they are more likely to be secure (windows servers are horrendously open to attack) and stable.

  • Firefox crashes or runs but with splotches missing color, how do i fix it?

    when I start firefox my desktop starts flashing on and off and when it returns there are splotches missing color. firefox then either crashes or runs but with the colors muted and images distorted.

    Try to disable hardware acceleration.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

  • Can anyone see if my software/hardware is running okay?

    EtreCheck version: 2.1.8 (121)
    Report generated 4 de Março de 2015 às 12:17:57 WET
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 652
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 19:53:43
    Disk Information: ℹ️
        TOSHIBA MK5065GSXF disk0 : (500,11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.88 GB (337.08 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 499.25 GB Online
        MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/hosts - Count: 30
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/Toast 9 Titanium/Toast Titanium.app
        [not loaded]    com.elgato.driver.Pluto2 (1.1) [Click for support]
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
        [not loaded]    com.roxio.TDIXController (1.7) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.13) [Click for support]
        [not loaded]    com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.13) [Click for support]
        [not loaded]    com.ZTE.driver.ZTEUSBCDCACMData (1.3.35) [Click for support]
        [not loaded]    com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.35) [Click for support]
        [not loaded]    com.driver.JRDMassStorageDriverType05 (1.0.0) [Click for support]
        [not loaded]    com.driver.JRDUSBModemCDC (1.0.0) [Click for support]
        [not loaded]    com.driver.JRDUSBModemData (1.0.0) [Click for support]
        [not loaded]    com.driver.JRDUSBModemData_MO (1.0.0) [Click for support]
        [not loaded]    com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) [Click for support]
        [not loaded]    com.novatelwireless.driver.3G (3.0.13) [Click for support]
        [not loaded]    com.novatelwireless.driver.DisableAutoInstall (3.0.13) [Click for support]
        [not loaded]    com.option.driver.Option72 (2.15.0) [Click for support]
        [not loaded]    com.option.driver.OptionHS (3.26.0) [Click for support]
        [not loaded]    com.option.driver.OptionMSD (1.21.0) [Click for support]
        [not loaded]    com.option.driver.OptionQC (1.11.0) [Click for support]
        [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.67) [Click for support]
        [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) [Click for support]
        [not loaded]    com.vodafone.driver (3.0.9) [Click for support]
        [not loaded]    com.zte.driver.cdc_ecm_qmi (1.0.26) [Click for support]
        [not loaded]    com.zte.driver.cdc_usb_bus (1.0.26) [Click for support]
            /System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
        [not loaded]    com.novatelwireless.driver.3GData (3.0.13) [Click for support]
            /System/Library/Extensions/Vodafone.kext/Contents/PlugIns
        [not loaded]    com.vodafone.driver.Data (3.0.9) [Click for support]
    Problem System Launch Daemons: ℹ️
        [running]    de.novamedia.nmnetmgrd.plist [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    de.novamedia.VodafoneDeviceObserver.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.facebook.videochat.[redacted].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
    User Login Items: ℹ️
        None
    Internet Plug-ins: ℹ️
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        Unity Web Player: Version: UnityPlayer version 4.5.4f1 - SDK 10.6 [Click for support]
        Silverlight: Version: 4.1.10329.0 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
    User internet Plug-ins: ℹ️
        RealPlayer Plugin: Version: Unknown
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Growl  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            13%    mds
             6%    WindowServer
             2%    hidd
             0%    AppleSpell
             0%    askpermissiond
    Top Processes by Memory: ℹ️
        434 MB    softwareupdated
        253 MB    com.apple.WebKit.WebContent
        112 MB    Google Chrome
        111 MB    Google Chrome Helper
        94 MB    Safari
    Virtual Memory Information: ℹ️
        38 MB    Free RAM
        1.56 GB    Active RAM
        1.54 GB    Inactive RAM
        1.06 GB    Wired RAM
        2.91 GB    Page-ins
        17 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 3, 2015, 04:20:46 PM    Self test - passed

    No, no one can tell from that information whether your software/hardware is running OK.
    Please describe the problem, if you have one, in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor.
    The many "failed" or "killed" warnings that etrecheck sometimes spews are not a reason to reinstall the OS.
    The better your description of the problem, the better the chance of a solution.
    For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

Maybe you are looking for