Has anyone experience a bug with red eye correction in LR 5?

No matter what I do, anytime I try to use the red-eye correction tool, I get the message "Unable to find red eye". Even in pictures where the red eye is huge and clearly visible. Has anything changed in LR 5 that would cause this? I have Red Eye Correction enabled. Anyone else experiencing this?
I'm a rather new LR user, so I'd be grateful for someone pointing me in the right direction before I file a bug report.
Thanks!

runningkatze wrote:
Thanks Rob...
You bet .
runningkatze wrote:
In LR 4, the tools seemed so much more forgiving. In LR 5, it is incredible sensitive.
I don't think there have been any algorithmic changes in red-eye, Lr5 vs. Lr4 (certainly none mentioned by Adobe, nor in Victoria Bampton's very thorough list of changes in Lr5, nor that I've noticed in the forums...), so if it is behaving differently (you sure it's not you? ), then it sounds like something is a-wonk now in your Lr5 (or was a-wonk before in your Lr4 ).
~R.

Similar Messages

Aperture makes eye purple with Red Eye Correction tool. Why? Bug?

http://www.hvmediasolutions.com/images/picture1.png
As you can see with the above picture, Aperture does not do red eye well. iPhoto gets it right, actually as well as Photoshop CS4.
Any suggestions? Or is this a bug?
And yes I could use Photoshop every time, but I am trying to do as much as I can in Aperture.
Thanks,
Ed

I have an old camera, Nikon Cool Pix 3100 and save my photos to .jpg. Yes I know, time to upgrade.
I capture straight into Aperture.
The thing that bugs me, iPhoto 08 gets it right, better than Photoshop. Aperture, since version 1, has always given me purple red eye cast on both Intel and Power PC Mac Book Pro's. Since iPhoto can get it right, Aperture should be able to.
Currently I use Pixelmator and desaturate with the brush tool for the best results.
By the way Lightroom 2 desaturates the eye to a light grey with it's red eye tool.
Different results with 4 different applications. I would love to just use one.
Ed

Has anyone seen this BUG with Time Warp and Dissolve?

I'm doing some real basic slow-mo clips, transitioning with various dissolve wipes. I've come across a problem that is extreemly frustrating! I'm wondering if anyone has insight on a fix or if Adobe does service packs or fixes that I might be able to install.
If you put two clips adjacent to each other on a timeline, apply time warp, set percentage to say 30% of realtime, then apply a dissolve between the clips, clip B, the outclip will play in reverse for a period equal to about 1/3 of the duration of the clip.
This is true scrubbing through the timeline and even rendering.
VERY ANNOYING!
I'm going to call support tomorrow, but that's not going to help me get my project finished any sooner since this is a critical element in this composition. I've tried the time remapping method, but the frame-blend is no match for the pixel motion of time warp.

Steve,
I think your post #11 was being sarcastic, but you left a little wiggle room for it not to be. With the sarcastic interpretation, I must add my thoughts:
Here is the link to the Adobe bug report form
. It is important that users who discover bugs with reproducible steps file them - otherwise they don't stand a chance of ever getting fixed. Steven Gotz's advice was sound in this regard.
As to the discussion of workarounds - since this is a User-to-User forum, the best that we as a community can do is help each other out with workarounds, since none of us here have the power to actually fix anything.
The important thing to glean from SG's post is the definite need to file a bug report.

Has anyone experience a problem with not being able to add a drumbeat loop to a prerecorded project? When I open the loop browser, there are only a few options available. The rest are greyed out. I can only choose individual drum sounds, not full beats

I have created a project and recorded 2 tracks, one with a guitar and the other vocals. I would like to add a drum loop, but when I pull up the loop browser, all of the normal selections aren't available. Some are greyed out, including "Beats". "All Drums" is available, but when I click on it it pulls up some cymbal sounds only. I've opened some old recordings in GB to see if this is a consistent issue, but it's not. Only this one project won't allow me to use drum loops. Which leads me to believe there is something I have selected or not selected within the project that's not allowing me to see all the loops. Any help would be much appreciated.
Thanks,
G Clef

g_clef wrote:
Only this one project won't allow me to use drum loops.
http://www.bulletsandbones.com/GB/GBFAQ.html#missingloops ?
(Let the page FULLY load. The link to your answer is at the top of your screen)

Has anyone seen this bug with embedded images?

If I embed a wide image in this post and you click on it to zoom it up, is it centered in the safari window or center WRT the monitor? Basically can you see all of it?

It looks like this, here. It's done that for a long time, unless Safari extensions are switched off, regardless of there being any installed.

Red eye correction

I am a brand new pse user, trying to understand the 'versions' concept. Everything I have read suggests saving your edits as a version of the original. Would there be a downside to overwriting the original with red eye corrected version instead of another copy?

Yes, particularly if you are using the auto red eye tool, which often corrects bright white teeth, light soures, etc. in place of the red eyes. If you really want to lose the original (not recommended) you can use the red eye tool in the editor and set PSE to save over the existing file. But a couple of years from now, when you have more sophisticated skills to use rather than the red eye tool, you may regret not being able to go back and redo them.

Has anyone experience this ...

Has anyone experience the IPOD FROZEN in the middle of the song? I recently bought the Ipod 30GB Video. It functioned fine for the first couple of weeks (last approx 12-15 hours of uncharge played song). Then comes the frozen. I fully charged the Ipod and played for half of an hour or so and suddenly, It froze and I could not do anything with it. I tried to reset several times and the problem still persisted. I also tried to restore to the manufacturing setting but it was not a successful restore. It hang in the middle of process. I took the Ipod to the Apple Store and one of the guy at the Genius Bar looked at it and said "it might caused by your song" ... ***? Anyhow, it turned out that it was the Ipod problem ... so he said. I got the replacement one.
Well, brought the replacement home and I thought it was fine until today ... the Ipod froze AGAINNNN .... grzzzzzz ... WHAT's HAPPENING? This time even worst, I cannot even reset ... It display a small sliver of red color at the battery and even though I plugged it into the computet for an hour or so, it still not being able to charged. Well, I paid another visit to the Apple store. Murphy Law, it's not working at home but it worked at the store (although, one of the Genius Bar guy explain that the Ipod "somehow" got into the critical low battery and the the provided USB cable does not have sufficient power to boost the Ipod to its recovery mode.) In fact, this guy (Genius Bar Guy) had to plug the Ipod into the other connector (not the USB one ... I am not a fan of Apple therefore not knowing the exact term for this connector) from his laptop and waited for 10 minutes of so and voila ... I took it home an charge for a nother few hours or so before I can put all of my music back into the Ipod.
Sorry for the long story but has anyone experience this ... if so, how do you comes into the fix ... I am not convince that the problem will go away and the the "boosting" thing ... or I just come with an unlucky Ipod ....

Just experienced same today. Firefox didn't even want to quit without a force quit. Removed Firefox and so far so good with other browsers - Safari and Chrome

Has anyone had a issue with itunes and windows 8.1?

I upgraded to Window 8.1 and now when I plug in my ipod nano gen 4 I get a message that says "ipod detected but it could not be identified". It also does not recognize my iphone 4. Microsoft says it is an itunes driver issue that is not compatible with the 8.1. Has anyone experience this?
thanks.

https://social.msdn.microsoft.com/Forums/ie/en-US/home?category=iedevelopment

Has anyone had a problem with depositing a check with the app for Bank of America?

Has anyone had a problem with depositing a check on a bank app?

Is the check something like a payroll check where its digitally printed and all in text?, or is it a handwritten check?
from my experience handwritten checks rarely work, myself and friends have always recieved an error stating the picture was to blurry no matter how many times we took a picture. From what i have read with others who have issues with depositing handwritten checks, some checks are deemed to blurry based on the handwriting, therefore the app wont accept the check, while other handwritten check will be accepted just fine, i hope this resolves your issue's and concerns

Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

Peggy
You are probably correct. I tried all different variations to test it. As long as I quit each document separately, i.e., red dot it, I seem to bring up only one document after that whether I click on the document itself or open it within pages. The same is true with numbers.
Two more questions:
1) can you turn off the "resume" feature? If so, how? I could not find a way to do it.
2) why the "save a version" feature in pages? What happened to the old "save" and "save as" features?
Thanks so much, you saved me a lot of frustration but I am still going to install MS Office for Mac.
Daveben

Has anyone experience this! - default browser helper 537

Hi,
I use Firefox as my default browser, since the firefox plug-in "default browser helper 537" was installed (in November) my mac has slow down, especially when browsing using both firefox and safari. I un-installed firefox a week ago and my pc has gone back to it original state. I installed Firefox again after two days from the previous un-install and the browsing slow down again. I then un-installed again. Has anyone experience this! IS there a issue with Firefox???

Just experienced same today. Firefox didn't even want to quit without a force quit. Removed Firefox and so far so good with other browsers - Safari and Chrome

Has anyone had this problem with VPN iPad vpn connection could not validate the server certificate

Has anyone had this problem with IPad 3 after upgrade to IOS 7,
trying to to connect VPN , but I get this messag, "could not validate the server certificate".
I am trying to connect to Oracle VPN.

Has anyone found a solution for this yet? I am still getting the could not validate server certificate error. I have tried importing the entire certificate chain as well as importing each individual cert in the chain. My certificate works perfectly with the cisco vpn on my pc.
This is my first experience owning an apple product, and I am very disappointed with the customer support that I have received. I tried calling the help line and no one would even attempt to answer my question. I was then told that the Mac "geniuses" wouldn't know either and that I may be able to find an answer on the message boards. So I am reaching out to the community...Has anyone been able to figure out how to resolve this issue or even the specific cause? Any help is appreciated.

HT4972 has anyone had issues syncing with microsoft exchange server since upgrading to ios 5.1.1

Has anyone had issues syncing with microsoft exchange since updating to ios 5.1.1

No bug I'm using exchange at work I've updated a couple of people here and it's working.
Your IT guy can't fix this for you? This problem usually is due to the exchange server not recogonizing your account. You have the right server and domain entered?

Has anyone had a problem with iOS 8.1.3?

Has anyone had a problem with iOS 8.1.3?

If you are having specific problems they should be in your post.
For problems that have been discussed Go into the specific forum (easy way is to click on the highlighted forum under the posting in Content).
Using the Search to the right of People you can also search the forum to see if other have had the problem you have.
If you feel it is a bug - contact apple support or give apple feedback -http://www.apple.com/feedback/>Apple - Feedback

I receive a message saying that 'the sim card inserted in this phone does not seem to be supported. Has anyone experience anything similar?

i receive a message saying that 'the sim card inserted in this phone does not seem to be supported. Has anyone experience anything similar?

Try removing your sim and insert it again and make sure that its clean as well as the sim tray. insert it seucrely locked in place. See if it works, quick fix. If not try to use a different sim or try your sim to a different h/s. For you to be able to isolate if its with your sim or iPhone. Tricky Tips!

Has anyone experience a bug with red eye correction in LR 5?

Similar Messages

Maybe you are looking for