Has anyone had power problems using Entune ?
When I use the Entune app in my Toyota and then shut it off and leave the car it appears to leave something running which exhausts the battery on my iPhone 5 and my old iPhone 4 in a few hours. Has anyone else had the same experience? Do you have any other solution than powering the iPhone down and rebooting?
Contact the app developer and report the problem.
Similar Messages
-
Has anyone had a problem using e-tax?
Has anyone had a problem using e-tax? If so, can it be fixed?
Yes, I had a problem where I could not open an existing data file. And I have a solution. (I found on Whirlpool.)
Do NOT click Yes to use an existing data file. Instead go to File in the Menu Bar and open an (the) existing file from last used list. Good luck! I hope the ATO can get these issues sorted. ETax for Mac has been a long time coming. -
Has anyone had a problem using Mainstage 2 and Logic 9 with PreSonus fire studio Mobile?
I Still can't get Mainstage and Logic to play well with my setup. I'm using a Mac Pro 2 GHz Intel Core i7 with 4 GB ram and Logic 9.1.6 and Mainstage2. I have a PreSonus Firestudio Mobile and M-Audio Midisport midi interfaces. The only Midisport that works consistently is a MisiSport 2X2 sith a thru/merge switch set to merge. I am playing all of this with a Roland A-90 keyboard. Logic sometimes starts, but the audio interface doesn't work. Mainstage crashes on start-up. Can anyone help?
Thanks,
BobHi
There have been several reported issues on this forum about problems a) with Roland controllers (Sending MIDI Clock and 'All Notes Off' ???), and b) MIDSport interfaces
https://discussions.apple.com/message/17138809#17138809
https://discussions.apple.com/message/17011191#17011191
I suggest that you try a 'scientific' process of elimination:
Disconnect all external hardware, and try MS
Connect the hardware singly, one at a time, to determine which is causing the problem
CCT -
i have a MacBook pro. I'm trying to connect my Mac through wifi at my house, it shows my router says it's connected with full signal yet I have no internet. So I thought I would try it at my friends house but I had the same problem. the Internet connection and wifi were on, as our iPhones were working through wifi. And my friends Mac works via wifi at my house. Just mine dosnt has anyone had this problem or can help me with this problem thanks.
Try this.
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH14204 -
Has anyone had a problem with their imac after the power company--in my case Pepco in Washington DC--installed "smart meters" which read the meter and transmit the data via wireless? I've had trouble and when I move the imac downstair it disappears. Help!
barryfromwashington wrote:
would putting up a metal shield by the meter help?
It might, as long as the shield is grounded. Metallic (such as copper) window screen is often sufficient.
As mentioned, it would not hurt to file a complaint. The burden of proper shielding should probably belong to Pepco. Among other things, the FCC frowns upon RF leakage and its interfereing with radio communications. Besides, Pepco probably would not want you to affix a shield around their gear - liability issues, etc.
You could experiment by temporarily hanging a shield-screen on the inside of the wall, behind where the meter transmitter device is located, and see if there is any beneficial change. -
My iPod 5th generation, The charger doesn't work but it says it's charging. When I use another person's charger, the iPod charges fine. Has anyone had this problem?
Yes, the Lightning cables do fail sometimes. They are covered by the same one-year warranty as the iPod
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Has anyone had a problem centering labels from microsoft word 2007 using the hp photosmart 7510? my
Has anyone had a problem with printing labels centered on HP Photosmart 7510 e-All in one? My labels are printed from Word 2007 and appear on the screen to be centered, however when I print, they are too high on the label. Also when printing an e-mail the bottom of the page where it lists your email name is cut off. Please help!!
Hi,
I'd been having this problem for probably round 30 years on many printers. I bought a labels printer few years back but I don't print labels everyday now.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails. when plugged in to sync with itunes, it remains 'stuck' at syncing step 2 of 7 backing up. has anyone had similar problems? any solutions?
I had this problem. I held down the power switch to power down completely. Takes a few seconds. Then use the power switch to turn on. Might take a couple goes.
Kirk -
I recently updated? to Lion from 10.6.8(snow leopard), and things seem to be running slower. Has anyone had similar problems? I have Feb 2011 Macbook pro 13" 2.3 Ghz.
As Shootist pointed out, the system uses more power.
However, initially it will reindex the hard drive for spotlight, which will slow things down temporarily.
It also must rebuild caches that eventually will speed things up.
If it has completed indexing the hard drive (no dot pulsing in the spyglass), then there might be something wrong.
Start by booting into the Recovery HD (a partition created with Lion that has Disk Utility and reinstallation options) by holding down cmd-r when you restart. You can let go when the gray screen appears.
When it boots, select Disk Utility and Repair the drive.
If that doesn't speed things up, try re-installing the OS from the same Recovery HD. It won't delete any of your files, but it has helped some people whose Macs ran slow after installing Lion.
Also, how much memory do you have? Lion needs RAM so maxing your Mac out might also help. -
Has anyone had a problem where your keyboard is typing symbols not letters?, Has anyone had a problem where your keyboard is typing symbols not letters?
Are you plugging it into the Wall charger or Via Computer if by computer use the Wall wort charger and a Power Cycle should help as well if not let me know..
-
Has anyone had any problems with their charger blowing out?
Has anyone had any problems with their charger blowing out? mine blew, there's now a charred pin on the charger and in the socket of the macbook. The plastic around the charge socket is also cracked & distorted from the blow-out. It wasn't a power surge as no other electrical items were affected. It wasn't liquid or dust, as I'm the only person who uses it & I'm very careful. I'm concerned that the consequences could have been terrible. I wasn't present when it happened though, I can just see the evidence after the event.
I have a mid 2010 13" Macbook running the latest software & use the original magsafe charger that came with it.
Will I have to fork out for a costly repair or is there a safety issue that Apple will sort out for me?
Any advice would be much appreciated.Everything in the box with iPhone is covered by the iPhone warranty ,go to Apple genius bar before warranty expires
-
The vibrate symbol that appears on screen when turning vibrate on, continually appears on my screen and vibrates all day. Has anyone had this problem or know how to fix it?
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on. -
Has anyone had a problem installing PSE Elements 8.
I have installed PSE Elements 8 from a new boxed CD onto a new Dell running Windows 7 Professional (64 Bit).
PSE has loaded without any warnings and I get to the welcome screen OK. Organiser works fine but if I try and start Edit it just circles around back to the Edit prompt. I have tried getting in via Fix in Organiser which then advises Loading Elements workspace but then drops me back to menu.
I have tried all the Tech Note suggestions but after hours of trying am still no further forward.
I even downloaded and installed the trial version but I this performs in the same way.
All suggestions welcome. ThanksNo luck.
PE Editor does not open with Ctrl/Alt/Shift nothing...zilch
Running PE Editor from this point using Open produces error message. PE Elements has stopped working - Close Program.
Thanks anyway.
Problem has now been escalated to senior tech team within Adobe.
Date: Mon, 1 Mar 2010 02:47:01 -0700
From: [email protected]
To: [email protected]
Subject: Has anyone had a problem installing PSE Elements 8.
The only other suggestion is try re-setting the Editor preferences as this often fixes conflicts. You will also be able to check that this part of the application installed correctly.
Hold down the windows key to the left of Alt and press the letter E to launch Explorer
In the left side pane click on Computer
In the right pane double click on Program Files, then double click Adobe, then double click Photoshop Elements 8.0
Use the right hand scroll bar to move down the list of files and locate Photoshop Elements Editor With one hand holding down all three keys CtrlShiftAlt right click on the Editor file in the list and select open.
You should see a pop up box with the words Delete Adobe Photoshop Elements Settings File?
Click on Yes
Close down Elements and re-open it in the normal way.
Please let us know if that works.
> -
Under the iCloud portion of settings on my iPhone, I have always gotten the message "account not verified". The email matches and is in fact the same for my accounts on iCloud and iTunes. Has anyone had this problem, and how have they resolved it?
Hello megalina23
You need to verify the email address associated with the Apple ID. Check out the article below on how to do this.
Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I bought a magazine subscription on my iPAD and after being charged, it does not come up on my screen. Has anyone had this problem?
When I click on the magazine, my screen is just blank. I can see the purchase, and in my settings/store, the magazine shows "ON".I would do a power cycle/reset of your device first, if you haven't, to rule that out.
http://support.apple.com/kb/HT1430
If that doesn't help, talking to iTunes customer support would be in order...or whoever you purchased the magazine subscription through.
http://www.apple.com/support/itunes/
If the magazine is browser based, you might also try another browser. I like "Atomic Browser". It is available on the app store.
Maybe you are looking for
-
CCM.LOG Showing Errors Connecting to Server (Error 5 - Access Denied) to \\\admin$ Share
Hi All! We are encountering what I think would be a normal error in most cases if a client is unavailable or offline. During client push, we are receiving errors connecting to a NULL value in the log (\\\admin$) as opposed to an actual client: Under
-
hi, can any one explain me how to pass header from my alv report when i wish to download it to excel. but the problem here is the header of my alv report comes form a table in to which more fields can be added in future.now the table contains 10 fiel
-
Frm-92101 error during next record
hi ........ when i execute query and move to second record then it gives frm-92101 error. please give the solution .. in log file following information 07/02/04 16:51:48 forms90web: Forms session <17> aborted: unable to communicate with runtime proce
-
NSU Team, Please urgently respond regardning N73 f...
As you may not know or aware of, many N73 users around the world are experience the same problem trying to update their N73s (including mine, in Bangkok). Even though there are newer version of firmware, when using Updater, it keeps saying there's no
-
HT4528 Icloud videos and pictures?
I have synced both my iphone 5s and iPad to the icloud though I see my calender ,,notes etc, I can't find my pictures or videos What am I doing wrong?