Has anyone managed to get a PS3 Controller to work with OSX Lion?

Hi,
I wanted to connect my PS3 controller to my iMac (late 2011) using bluetooth but have been unable to do so. It will connect for a brief time but then it will lose connect as it has not paired. It also asks me for a pairing code. I have tried 0000 and this does not work. I have searched the internet and it seems this is a common issue. Has anyone managed to get it working?
Does anyone know if Apple plan to fix the issue with a forthcomming update?
Cheers,
Tim

There are numerous threads on this, please use the "More Like this" tool, you will find it on the right. I'm not sure if anyone has any solutions but that is the logical place to start.

Similar Messages

Has anyone managed to get a 3TB dynamic disk on Windows 2003 Server?

I just got a pair of new 3TB disks that I wanted to put on my Windows 2003 server enterprise x64 system, SP2, all updates installed.
When I first tried to convert to dynamic, I got the error "The operation did not complete" as described in this KB article
http://support.microsoft.com/kb/826823
It says there is a patch, but there is not one for x64, just x86 and ia64
I found another technet discussion here: https://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/cb62238c-b3d0-4989-b45a-ae6de6701a7b?stoAI=10
However its best suggestion is to use a product from AOMIE, but I tried that and it didn't even recognize the disk. It also suggests that one needs a better version of diskpart.exe and to try to the 32 bit version. Anyone have any experience
with that?
I also tried creating moving the disk to Windows 7 x64, making it dynamic there, but when I move the disk back to 2K3 it does not recognize it, and goes back to a 2TB partition. I also saw something about needing a 512 block size for 2K3, but W7 does
not allow anything smaller than 1K.

Hi,
During my research, if found the following artcle which also mentioned a 3TB disk should be supported in Windows 2003 SP1:
Has anyone managed to get a 3TB dynamic disk on Windows 2003 Server?
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/a720ae72-0c04-44dd-94c0-2e6aecce530e
So I contact the author about this issue. He said it could be caused if your hard disk is a 512e drive as the 3TB drives on the market today are normally 512e drives.
However manufacturers stopping identifying this, and if the controller is old, FSUtil will not able to identify a 512 drive but recognized it as a normal 512n drive.
Thus please provide the drive model so we could search on manufacturer's website for exact information.
Also please paste the screenshot in your reply which Satish mentioned if available.
In addition, here is an article Robert provided:
http://www.windowsitpro.com/article/what-would-microsoft-support-do/support-advanced-format-hard-drives-141584

Has anyone managed to get HP Warranty Information into SCCM?

Has anyone managed to get HP Warranty Information into SCCM?
I have tried a few scripts that I found on the net but none of them seem to work as I believe HP updated there site this year..

OK, I played around a bit (scripting from a web page isn't way beyond me) but... a few caveats. My lab isn't available right now; so all I could test was that the script ran on an HP laptop. A single HP laptop. and created the regkeys in
(in my case) HKLM\software\wow6432node\CompanyName\WarrantyInformation. So... one single test on one single workstation, and no testing of the mof edit means... I'll need your help to confirm it works.
Anyway, below is the script. Other caveats: It drops a log, and then continuously adds to the log file in %temp% (of the SYSTEM, which is using %windir%\temp). So depending upon what you want/need--you may want to change the EnableLogging
= True to EnableLogging = False (once you confirm it works on all/most of your boxes). The other caveat, of course, is to change the sCompanyname = to be your Company Name; although I suggest you don't have spaces or special characters in it. Short
'n' sweet. Then, naturally, once you have a box with the regkeys, use Mark Cochrane's RegKeytoMof 3.0 or higher to build the mof edits for you to paste to the bottom of your configuration.mof and sms_def.mof. In that blog above Eric Schloss was
using DCM as the delivery method to deliver the script to populate the regkeys--that worked for him and I see no reason it wouldn't work for everyone--so once you've tested the script interactively from a psexec -s -i cmd.exe shell on an hp box (to see it
create the regkeys) I'd make a DCM like Eric did and target a collection with a few HP laptops or desktops and confirm it works via the DCM.
Anyway, give this a try--again... only tested on 1 single, lonely little HP laptop. Needs a bigger test base!
Edit: and... even using Regkeytomof sometimes regkeys can be tricky. If the mof edit doesn't work right to pull the data back, post what you've added. someone here can usually spot if there's something not right about it and help you fix
the mof edit.
Edit #2: removed bad space, and bad copy/paste job as discovered by sevengs. Thanks!
on error resume next
EnableLogging = True
sCompanyName = "CompanyName"
Set oShell = CreateObject("wscript.Shell")
Set fso = CreateObject("scripting.filesystemobject")
strTemp = oshell.ExpandEnvironmentStrings("%temp%")
If EnableLogging Then
Set oLogFile = fso.OpenTextFile(strTemp & "\WarrantyInfo.log", 8, True)
oLogFile.WriteLine "*********************************************************"
End If
WriteLog "Beginning warranty information lookup."
sWebServiceHost = "http://h20000.www2.hp.com/bizsupport/TechSupport"
sWebServiceURL = "WarrantyResults.jsp"
sWebService = sWebServiceHost & "/" & sWebServiceURL
'Get the system's serial number from WMI
Set oWMIService = GetObject("winmgmts:\\.\root\cimv2")
Set colItems = oWMIService.ExecQuery("Select SerialNumber from Win32_BIOS",,48)
For Each objItem in colItems
sSerialNumber = objItem.SerialNumber
Next
WriteLog "Serial number of system is " & sSerialNumber
'Get the Product ID from WMI
Const wbemFlagReturnImmediately = 16
Const wbemFlagForwardOnly = 32
lFlags = wbemFlagReturnImmediately + wbemFlagForwardOnly
strService = "winmgmts:{impersonationlevel=impersonate}//./root/HP/InstrumentedBIOS"
strQuery = "select * from HP_BIOSSetting"
Set objWMIService = GetObject(strService)
Set colItems = objWMIService.ExecQuery(strQuery,,lFlags)
sProductNumber = ""
For Each objItem In colItems
If objItem.Name = "SKU Number" Then
sProductNumber = objItem.Value
End If
If objItem.Name = "Product Number" Then
sProductNumber = objItem.Value
End If
Next
If Len(sProductNumber) = 0 Then
WriteLog "ERROR: Product Number could not be determined."
oLogFile.WriteLine "*********************************************************"
oLogFile.Close
WScript.Quit(9)
Else
WriteLog "Product number of the system is " & sProductNumber
End If
Set colItems = oWMIService.ExecQuery("Select AddressWidth from Win32_Processor",,48)
For Each objItem in colItems
sAddressWidth = objItem.AddressWidth
Next
WriteLog "Operating system is " & sAddressWidth & " bit."
'Define the parameters string to send to the web site
sParameters = "nickname=&sn=" & sSerialNumber & "&country=US&lang=en&cc=us&pn=" & sProductNumber & "&find=Display+Warranty+Information+%C2%BB&"
WriteLog "Opening the web site URL " & sWebService & "?" & sParameters
'Define and call the web site
Set oHTTP = CreateObject("Microsoft.xmlhttp")
oHTTP.open "GET", sWebService & "?" & sParameters, False
'oHTTP.setRequestHeader "Content-Type", "application/x-www-form-urlencoded"
oHTTP.send
If oHTTP.Status = 200 Then
WriteLog "Successful response from the web site."
'WriteLog oHTTP.ResponseText
Process oHTTP.ResponseText
Else
WriteLog "ERROR: the web site returned status code " & oHTTP.Status
WriteLog "Returning exit code 1."
nExitCode = 1
End If
If EnableLogging Then
oLogFile.WriteLine "*********************************************************"
oLogFile.Close
End If
WScript.Quit (nExitCode)
Function Process (HTML)
WriteLog "Processing the HTML returned from the site."
intSummaryPos = InStr(LCase(html), "serial number")
If intSummaryPos = 0 Then
Process = ""
Exit Function
End If
intSummaryTable1Start = InStrRev(LCase(html), "<table", intSummaryPos)
intSummaryTable1End = InStr(intSummaryPos, LCase(html), "</table>") + 8
intSummaryTable2Start = InStr(intSummaryTable1End, LCase(html), "<table")
intSummaryTable2End = InStr(intSummaryTable2Start, LCase(html), "</table>")
table1 = getStr(intSummaryTable1Start, intSummaryTable1End, html)
table2 = getStr(intSummaryTable2Start, intSummaryTable2End, html)
const HKLM = &H80000002
Set oReg=GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\default:StdRegProv")
sKeyPath = "SOFTWARE\" & sCompanyName & "\WarrantyInformation"
WriteLog "Registry key path is HKLM\" & sKeyPath
oReg.CreateKey HKLM,sKeyPath
WriteLog "Processing the first table from the web page."
arrGeneral = processTables(table1,1)
'arrGeneal should be in the form Serial Number, Product Number, Product Line, Product Description, Warranty Check Date
WriteLog "Processing the second table from the web page."
arrContracts = processTables(table2,2)
'arrContracts should be in the format Warranty Type, HW Warrenty Start Date, HW Warranty End Date, HW Warranty Status, Setup Warranty Start Date, Setup Warranty End Date, Setup Warranty Status
WriteLog "Setting registry values."
WriteLog "SerialNumber is " & arrGeneral(0)
oReg.SetStringValue HKLM, sKeyPath, "SerialNumber", arrGeneral(0)
WriteLog "ProductNumber is " & arrGeneral(1)
oReg.SetStringValue HKLM, sKeyPath, "ProductNumber", arrGeneral(1)
WriteLog "SerialLine is " & arrGeneral(2)
oReg.SetStringValue HKLM, sKeyPath, "ProductLine", arrGeneral(2)
WriteLog "SerialDescription is " & arrGeneral(3)
oReg.SetStringValue HKLM, sKeyPath, "ProductDescription", arrGeneral(3)
WriteLog "WarrantyCheckDate is " & CStr(CDate(arrGeneral(4)))
oReg.SetStringValue HKLM, sKeyPath, "WarrantyCheckDate", CStr(CDate(arrGeneral(4)))
WriteLog "WarrantyType is " & arrContracts(0)
oReg.SetStringValue HKLM, sKeyPath, "WarrantyType", arrContracts(0)
WriteLog arrContracts(1)
WriteLog "HardwareWarrantyStartDate is " & CStr(CDate(arrContracts(1)))
oReg.SetStringValue HKLM, sKeyPath, "HardwareWarrantyStartDate", CStr(CDate(arrContracts(1)))
WriteLog "HardwareWarrantyEndDate is " & CStr(CDate(arrContracts(2)))
oReg.SetStringValue HKLM, sKeyPath, "HardwareWarrantyEndDate", CStr(CDate(arrContracts(2)))
End Function
Function getStr(startpos, endpos, data)
Dim tmp
'Get the substring
tmp = Mid(data, startpos, endpos - startpos)
' Remove end of line
tmp = Replace(Replace(Replace(tmp, VbCrLf, ""), vbCr, ""), vbLf, "")
getStr = tmp
End Function
Function processTables(table, ttype)
' Remove HTML Tags and replace with "|"
Set re = New RegExp
re.Pattern = "<[^>]+>"
re.IgnoreCase = True
re.Global = True
table = re.Replace(table, "|")
table = Replace(table, " ", "")
table = Replace(table, ":", "")
table = Replace(table, " ", "")
' Remove excess |
re.Pattern = "[|]+"
table = re.Replace(table, "|")
' Clean up a bit more
re.Pattern = "\|\s+\|"
table = re.Replace(table, "|")
' Remove | from start and end of string
re.Pattern = "^\||\|$"
table = re.Replace(table, "")
arrTable = Split(table, "|")
arrTmp = ""
If ttype = 1 Then ' General Info Table
i = 1
For Each cell in arrTable
Select Case LCase(Trim(cell))
Case "serial number"
sSerialNumber = arrTable(i)
Case "product number"
sProductNumber = arrTable(i)
Case "product line"
sProductLine = arrTable(i)
Case "product description"
sProductDescription = arrTable(i)
Case "date of warranty check"
sCheckDate = arrTable(i)
End Select
i = i + 1
Next
arrTmp = sSerialNumber & "|" & sProductNumber & "|" & sProductLine & "|" & sProductDescription & "|" & sCheckDate
ElseIf ttype = 2 Then ' Contract Info
i = 0
For Each cell in arrTable
cell = Replace(cell," ","")
if Instr(lcase(trim(cell)),"wty hp hw maintenance onsite support") > 0 then
cell = "wty hp hw maintenance onsite support"
end if
if Instr(lcase(trim(cell)),"wty hp hw maintenance offsite support") > 0 then
cell = "wty hp hw maintenance offsite support"
end if
if Instr(lcase(trim(cell)),"wty hp support for initial setup") > 0 then
cell = "wty hp support for initial setup"
end if
Select Case LCase(Trim(cell))
Case "warranty type"
sWarrantyType = arrTable(i+8)
Case "wty hp hw maintenance onsite support"
sHWStartDate = arrTable(i+1)
sHWEndDate = arrTable(i+2)
sHWStatus = arrTable(i+3)
Case "wty hp hw maintenance offsite support"
sHWStartDate = arrTable(i+1)
sHWEndDate = arrTable(i+2)
sHWStatus = arrTable(i+3)
Case "wty hp support for initial setup"
sISStartDate = arrTable(i+1)
sISEndDate = arrTable(i+2)
sISStatus = arrTable(i+3)
case else
End Select
i = i + 1
Next
arrTmp = sWarrantyType & "|" & sHWStartDate & "|" & sHWEndDate & "|" & sHWStatus & "|" & sISStartDate & "|" & sISEndDate & "|" & sISStatus
End If
' Remove | from start and end of string
re.Pattern = "^\||\|$"
arrTmp = re.Replace(arrTmp, "")
'wscript.echo arrTmp
arrResult = Split(arrTmp, "|")
Set re = Nothing
processTables = arrResult
End Function
Function WriteLog (sText)
If EnableLogging Then
oLogfile.WriteLine Now() & " " & sText
End If
End Function
Standardize. Simplify. Automate.

Has anyone managed to make the Canon 8000F Scanner work on this system?

has anyone managed to make the Canon 8000F Scanner work on this OX system?

Part of the problem is that this is probably not a "logical" error. The common cause of this issue is still image files where the pixel size is too large. This suggests that Encore's (and other Adobe apps) ability to handle image size is exceeded without a better error message. The link, which I'm going to post until I find a "new" location (if one exists) is now a bad link:
http://helpx.adobe.com/encore/kb/error-software-used-decode-media.html
And in this example where it was not an image issue, the user fixed the problem by re-encoding the problem file.
http://forums.adobe.com/message/6004428#6004428

Has anyone got the IIS Policy Agent 3.0 working with an ASP web application

Hi,
Can anyone pllease please confirm if they have managed to get the IIS Policy Agent 3.0 working for a asp/asp.net web site on IIS 7 running on Windows Server 2008 64 bit.?
I have installed the 32bit version of the agent as my web site must support 32 bit applications.
I have created a simple web site which works fine with the policy agent configured if the page is html, If I rename the html page to be of type asp I get an Object Move error.
I would much appreciate if someone could confirm if they have managed to get an asp web site working with the policy agent.
Note: The Policy Agent 2.2 worked perfectly with asp on IIS 6.0.
Thanks in advance,
Tommy.

I managed to make Agent 3 work with IIS 7 for a sample application based on aspx in Dev environment .... after modifying the sample application, I got the same errors as "Object removed" and others .... I have no idea what the hell. Fortunately, a super .Net start here spent a few minutes to do some twicking on IIS, and make it work again .... don't ask me what he did, I am pretty dump, and no idea. :)
Thanks

Has anyone managed to get play count/last played to sync?

I can live with the podcasts being borked, it's prompted me to use an app (hello iCatcher!) which I had been planning to do for a while. I'm still learning its ways, but it feels a lot more comfortable already.
The thing that I absolutely cannot understand is how ratings, playcount and last played times are not synchronising. I've a number of smart playlists based on these attributes and I haven't been able to get them to sync up since I enabled Match on my iPhone.
So I've got an iPhone which I sync with iTunes on a Mac. Everything's patched up to the latest version.
Has anyone successfully had any successful syncs? The smart playlists are just a joke - I'd expect the track listings to be comparable between devices, but they just aren't.
This is a beta product which some glaring functionality holes. How Apple can think it's worth paying for is beyond me. The smart playlist functionality has been working seamlessly for years on iTunes ... but it's broken. And I paid for the product that broke it. I'm feeling very let down.

I haven't managed to get any playcount, ratings etc to sync. There are so many issues with this version of iTunes Match I cannot believe Apple released it.
The order of tracks in playlists doesn't match iTunes on my Mac, selecting a folder of playlists in iTunes on my iPhone hangs the phone and sometimes crashes it, metadata doesn't sync, some albums are split into 2, etc.
Looking forward to an update soon.

Has anyone managed to get icloud to synchronise properly with outlook calendar?

I have an iphone 5 and am running outlook 2010 on windows 7 32 bit.
I can get icloud to do the intial upoload of the calendar but then after that it won't synchronise new calendar entries.
The phone and icloud syc, but icloud won't sync with outlook whether the entry is put in outlook or in icloud.
I have spoken with Apple support and over many weeks have de-installed and re-installed icloud several times.
I have sent various diagnostiocs and screen shots.
The icloud outlook addin does not appear in the outlook add-ins section, although I can see what might be the add-in sitting on the c drive in the apple folder.
Support have also told me that there is no way to download the icloud add-in seperately.
Apple support are now telling me that I need to de-install and re-install outlook to try and get the add-in to install correctly.
That would be a real pain and I can see on this forum that other people have already tried that without success.
They also say that if that doesn't work I will need to completely re-install the OS.
I don't think they know what the problem is and are just trying anything that might work.
I really don't want to lose all my business data from outlook and certainly don't want to trash my whole PC.
Has anyone any idea where the problem might be?
Many thanks

Do I gather by the lack of answers that nobody has?

Has anyone managed to get Hotmail to work with Mail?

Hotmail aka Windows Live Mail.
Has anyone got Mail 3 in Leopard to work with Win Live/Hotmail?
If so, I would love to hear about how you did so, as I would like to use Mail to check e-mail. =)
Thanks.

How to Access Windows Live Hotmail with Mac OS X Mail - About Email
http://email.about.com/cs/macosxmailtips/qt/et042503.htm

Has anyone managed to get Authorization working with JAAS from CusLoginMod?

Hi everybody,
I am on a standalone oc4j 10.1.3.1.0
I want to be able to access a private resource using form based authentication
and I would like to use JAAS from with a custom login module.
The authentication part works just fine but the authorization doesn't seem to happen.
Both login() and commit() from my LoginModule are called and after authentication takes place, the subject is populated with the right Principals, in my case "testers".
This Subject then it should be matched against the <security-role> defined in my application's web.xml
This is the part from my application's web.xml which holds the security information.
<security-role>
<description>Online User</description>
<role-name>testers</role-name>
</security-role>
<security-constraint>
<web-resource-collection>
<web-resource-name>access to the private application</web-resource-name>
<url-pattern>/faces/user/*</url-pattern>
</web-resource-collection>

<auth-constraint>
<role-name>testers</role-name>
</auth-constraint>
<user-data-constraint>
<transport-guarantee>NONE</transport-guarantee>
</user-data-constraint>
</security-constraint>
<login-config>
<auth-method>FORM</auth-method>
<form-login-config>
<form-login-page>protected.htm</form-login-page>
<form-error-page>error.jspx</form-error-page>
</form-login-config>
</login-config>
Has anyone faced this scenario before?
Any advices much appreciated
thank you.

I can't see what am I missing if I'm missing something.
This is my orion-application.xml
<orion-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/orion-application-10_0.xsd">
<jazn provider="XML" jaas-mode="doAsPrivileged" location="">
<property name="role.mapping.dynamic" value="true"></property>
<property name="custom.loginmodule.provider" value="true"></property>
</jazn>
<jazn-loginconfig>
<application>
<name>JAAS</name>
<login-modules>
<login-module>
<class>jaas.JAASLoginModule</class>

<control-flag>required</control-flag>
<options>
<option>
<name>debug</name>
<value>true</value>
</option>
<option>
<name>log_level</name>
<value>ALL</value>
</option>
</options>
</login-module>
</login-modules>
</application>
</jazn-loginconfig>
</orion-application>

Has anyone managed to successfully set up VPN to work on BT hotspots?

Hi all
I wanted to connect via VPN at BT hotspots. BT recommend using a Cisco client (which you can download if connected to one of their "premium hotspots") but this isn't compatible with OSX 10.7 (you get Error 51: can't connect). There is loads of (too much) stuff written on google about this problem, but I wonder whether anyone out there has managed to successfully configure the built in OSX VPN client to work with BT? BT of course abdicate all responsibility for this...
Many thanks,
Dave

I suspect I may never know why, but now, inexplicably, everything is working.
Out of curiosity, I tried to connect via an older win2000 machine that we use for a file server and it worked!
After we rebooted the other XP machines, they started working too.
I'm sure the fix was anything but connecting a win2000 machine, but I'm just happy it works now!

Has anyone been able get RSA SecurID installed and working on Mavericks? If so please enlighten me!

I just migrated from 10.7.5 to 10.9 (new MacBook Pro). Fantastic migration except for the VPN/Secur ID portion. Has anyone migrated or re-installed RSA SecurID onto 10.9?
I went to this link: http://www.emc.com/security/rsa-securid/rsa-securid-software-authenticators/mac- os.htm
And the install package would not open. I realize in the support section for the product that it does not designate Mavericks (10.9) but in the past they have always been a couple of OSX versions behind and there has been a way to get it to work. I hope so. Really looking forward to using this new MacBook with Mavericks. Everything else seems to work great!
Best Regards;
Scott

I installed RSA SecurID after updated to 10.9, but it didn't work.
the issue is following:
"Error loading application, please contack your administratot"
I tried to install it again, and can use to gain the passcode. but the SecurID cannot work well after i restart my MBP.
the error information is same as the last.

Anyone managed to get a X6 Cam Duo working ?

Hi I have a X6 Cam Duo webcam works with the bundled software but no app work-with it ?
anyone had any success with this type of webcam

What's a *X6 Cam Duo webcam*? Google search reveals only your post when searching for it. I suggest you post more details. Additionally, if it came bundled with software, then that's the stuff you should use with it. Finally, 10.5.2? That's obsolete and over a year old. Update to 10.5.7, reinstall the bundled software, and see if that solves your problems, whatever they are.

Has anyone been able to make an APC Biopod work with OS X?

Hello All!
With the new fingerprint reader now part of the iPhone 5S, I remembered that I purchased, about 10 years ago, an APC Biopod.
This is a neat fingerprint reader, connected by USB, that worked very well under Windows XP.
Has anyone ever succeeded in connecting one of these to OS X? Or would you have a suggestion for a driver / app that might support this?
Thanks!

Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams

How Do I get Final Draft 7 to work with OSX 10.8.3 ?

Everytime I try to open it I get this message (see attached). I can't update to Final Draft 8, so if that's your sugestion please don't respond. I heard there is something I can download to make it work? Please help! Thank you so much! Miranda

Sorry, but according to Final Draft you can't run FD7 in OS X 10.8:
Final Draft v.7 / 6 / 5 are not compatible with Mountain Lion.
If you own Final Draft v.7 / 6 / 5 and you want to run Final Draft on a Mountain Lion computer, you will need to upgrade to v.8. This upgrade is not free.
The only way to run Final Draft 7 on a Mountain Lion system, therefore, would be to run Mac OS X 10.6 Server in virtualization. 10.6 Server is available for US $19.95 if you call the online Apple Store. You then can install and run that in a solution such as Parallels Desktop, VMWare Fusion, or VirtualBox. Or if your Mac will boot from Mac OS X 10.7 or an earlier version, you could create a new partition on your Mac's hard drive, or use an external drive, and install the earlier OS X version on that volume and boot to that when you need to run Final Draft.
Regards.

Has anyone managed to get Authorware 7 Content Working on the Web

Hi I get this message when I try to get the web player working
Can anyone help!!
[email protected]

I used classes12.jar with a 9.2 database without any problems. JDBC calls, XA Datasources as well as CMP calls worked fine.
I think the ojdbc14.jar is required for use with a 1.4 JDK.
Of course, there might be features in 9.1 that might require the new jar.
Just mentioning that the jar did not pose me problems. Adding this information so it might help the OP narrow down the source of error.

Has anyone managed to get a PS3 Controller to work with OSX Lion?

Similar Messages

Maybe you are looking for