Has FCP X the equivalent of FCP 7's "Add Master Template" command?

The question is in the title!
Is there anything similar?

Not as such, but there are many title animation templates in the title browser.

Similar Messages

  • TS1717 I have older version of itunes on Windows Vista, when i check for updates it states it cannot connect to itunes update server even though i am connected to the internet, i have an iphone that has songs in the cloud and i wan to add them to my libra

    I have older version of itunes on Windows Vista, when i check for updates it states it cannot connect to itunes update server even though i am connected to the internet, i have an iphone that has songs in the cloud and i want to add them to my library?

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • I have a FCP event and project with all accompanying media saved on a harddrive.  I am now attempting to open the files on another computer that also has FCP X.  I cannot figure out how to get it to open.

    I have a FCP event and project with all accompanying media saved on a harddrive.  I am now attempting to open the files on another computer that also has FCP X.  I cannot figure out how to get it to open.

    The events and projects folders have to be on the top level of the drive for FCP to recognize them.

  • I am having issues placing digital pictures in master templates in FCP 6

    Hello everyone, this is my first post but I have been using Mac's for some time now with basically no issues.
    I have two major issues:
    First off, I am trying to place digital pictures which are enormous in the master template drop boxes, when I do this it cuts off the top and bottom of the image but the image still looks clear. The pictures I am importing are 1200 x 1800 jpg files, and were shot with a Canon EOS 30D. What I did was take all the images I needed and used Motion Pictures from Toast Titanium 8 and made a slideshow which I then exported as a QuickTime movie. I didn't know how to encode it so I used the DV/DVCPRO - NTSC codec and the dimensions were set to 3240 x 2430 since I thought that should give me the best quality image right?
    Anyway, after doing this I have imported this QuickTime movie into Final Cut Pro and then I cut it up and placed little clips into each drop box. This makes it so I can see the whole picture now, but it still is not as high quality as the original pictures.
    So, I have tried many times to export this master template with the pictures in the drop boxes and the finished QuickTime file looks terrible. I have not changed anything in the settings and when I export the quicktime movie I keep all the settings the same.
    What do I need to do to get this to look better? Any ideas?
    The other thing is that I have noticed a big reduction in quality from when I have the unrendered master template with the digital images in the drop boxes to when it autorenders after I have been away from the computer since I am stressing from this.
    I am trying to take these pictures of high school basketball players and use the master template to have all the players pics and names come flying on the screen before the game comes on.
    Any ideas? Why is the quality so bad? Am I doing something wrong? I have searched throughout the forums and found little information for digital images being imported into master templates, and I do not know if I am using a lossy format or something?
    Any help is extremely appreciated!

    First off, I am trying to place digital pictures which are enormous in the master template drop boxes, when I do this it cuts off the top and bottom of the image but the image still looks clear. The pictures I am importing are 1200 x 1800 jpg files, and were shot with a Canon EOS 30D. What I did was take all the images I needed and used Motion Pictures from Toast Titanium 8 and made a slideshow which I then exported as a QuickTime movie. I didn't know how to encode it so I used the DV/DVCPRO - NTSC codec and the dimensions were set to 3240 x 2430 since I thought that should give me the best quality image right?
    Digital pictures are no different than any other still images, or movies, for that matter, as fas as Motion or FCP are concerned, they're just pixels.
    Your image are way too big for video. Even if you're doing high def, you're scaling them down to fit many on the screen. Thye don't need to be an larger than, say, 1k on the long side.
    You blew them up by a factor of 300% to get them out at 3240 x 2430 so now you've made all the pixels bigger than they used to be, you haven't added any pixels. Now you're biring that huge movie into FCVP and scaling it down by a factor of about 90%, wasting huge processing time and muscle and tons of disk space, totally wasted, and every scaling operation has introduced tons of artifacts.
    Throw it all ways. Batch your photos through Photoshop to change them all into 1k jpegs and start over.
    The templates are fun places to start but the mattes are (mostly) designed to crop and scale. so if you have images that are huge, they just get scaled to fit. You want to start with an image that requires the least amount of scaling.
    Welcome to the family. Video is hard.
    bogiesan

  • FCP 7.0.3 Crashing/Not responding while importing master templates

    Hi
    I have Apple Motion 4 , Apple Motion 5 and Final Cut Pro 7.3.0 in my old mac mini. All were working fine (Not sure about FCP7).I recently installed some Master Templates (Motion 4 & 5) under username1. Now when I try to drag and drop master template to FCP timeline its showing  the spinning wait cursor..and its not loading anything even after one hour.
    One interesting thing is FCP master templates are working fine without any issue in other logins like username2.
    I would like to mention some points here
    1.    Motion 4 installed under root folder so it will be available for all users
    2.    Motion 5 installed under username1 so it will not be available for others
    Is there a solution for this issue..i tried trashing preference and all..but no use.
    Pls help me
    Thanks,
    Praveen N U

    http://www.digitalrebellion.com/promaintenance/
    Has a crash analyzer.  Pretty sure there's a free demo
    And delete your preferences
    https://discussions.apple.com/docs/DOC-2491
    and here are some other troubleshooting tips
    https://discussions.apple.com/docs/DOC-2591

  • FCPX: What has happened to the ruler on the timeline?

    When I updated to 10.1.3 my time scale has disappeared from the timeline - see photo. Can anyone help? Thanks.

    Try these:-
    Use this free app to trash the  preferences  correctly. This should be the first thing you try when any problems occur.
             http://www.digitalrebellion.com/prefman/
    2.  With FCP X shutdown, hold down option key and select Go>Library>Application Support>Final Cut Pro  .  .  .  trash the Layouts Folder.
    To post a screenshot, simply drag it off the desktop and drop it onto your post  .  .  .  before you have posted it of course. 

  • FCP won't add cross dissolve transition to clips

    After putting two Quicktime clips into FCP, I attempted to add a cross dissolve transition in between the two clips. When I dragged the cross dissolve transition to the two clips, nothing happened. That transition had been used before, and as far as I can tell, nothing was different this time than all the previous times. For some odd reason, FCP refuses to add the transition to those clips.
    Has anyone experienced this before? Any ideas on what could have happened? More importantly, is there a way to work around this problem?
    Thanks!
    iBook G4   Mac OS X (10.4.7)  

    This is a problem when you do not edit down your raw clips and drop them into the timeline as they have been captured.
    The operative concept is 'handles'.
    For transitions to work, you need enough unused footage AFTER the OUT point of first (outgoing) clip and BEFORE the IN point of the second (incoming) clip.
    Drop the first clip into the Viewer and set an OUT point 30 frames or so from the end of the clip. Drop the second clip into the Viewer and set the IN point 30 frames or so past the beginning of the clip.
    Now try to place your transition.
    x

  • Can't see Master Templates in FCP 6

    Hello,
    I'm trying to view my master templates in FCP 6. Both the user templates that I've created in Motion 2 and the factory templates that come with Motion 3 are showing a white screen when I try to open them in the viewer or the the timeline. The other computer in the studio has the same stats as mine and is able to view the templates. Am I missing a setting?
    Thanks,
    eric

    Open IE Control Panel, select Java (if you can't, there's a problem with the Java install), select Advanced tab, expand <APPLET> tag support, and click IE. Click OK.
    Close all IE windows to reinitialize IE, then try the applet.

  • I have a word document that I have put hyperlinks in and turned into a pdf.  When I email and receiver opens in iPad the document is blank.  When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content

    I have a word document that I have put hyperlinks in and turned into a pdf.  When I email and receiver opens in iPad the document is blank.  When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content turned into symbols.  What is going wrong?

    You select the printer properties and set the appropriate page size (I think there is a place to set it in PDF Maker too, but not sure). In the printer, this is equivalent to putting the proper paper in the printer.

  • Where can I find the equivalent tools in Photoshop that are in the develop module of Lightroom

    Friends:
    Where can I find the equivalent tools in Photoshop that are in the develop module of Lightroom?  For example I would like to use the shadow, clarity, lens correction and such tools but cannot find them in Photoshop.
    Thanks amigos
    Migs

    The obvious or not so obvious first. Depending on your knowledge. When you open a tiff, jpg, or camera' raw format they can be opened in Adobe Camera raw first which has identicle controls to lightroom's develop module.
    Starting with I beleive CS5 maybe 4, some of the tools made their way into photoshop it self. Take a look at the camera lens filter, the Image>Adjustment menu or the adjustment layers which now support vibrance for example.

  • Has adobe adopted the compound math feature like quark has in its interface.

    I am currently working with CS3. Has adobe adopted the compound math feature like quark has in its interface.
    For instance If I want to duplicate an item 29/6" vertically but I know that that step should be 1/8" short, in quark I can type 29/6-.125, or 29/6-1/8. Either method will give me 4.708333. Same issue when I just want to draw a box a specific size minus or plus 15/64 or an inch. Adobe forces me to look up the decimal equivalent before I enter it or I will get the message: "INVALID NUMERIC VALUE"
    This applies to all adobe products I use.
    This really slows production down and I hope CS5 allows this now.

    Seriously Bob, Seriously. Quark has had this feature for 20+ years.
    Quick, do the following, draw a box or a line or anything.
    Now move it to here.
    2.0416 in +3/64 -7pt -3in -9.7mm
    I can type this verbatim in qxd and end up with what I want, I CANNOT do this in any adobe product that I currently use.
    There is nothing wrong with my attitude, this is a feature that I use daily in my work and having indd and ill require me to look up decimal equivalents of inch fractions is not productive.
    If my priorities do not match your priorities why does that make mine a total mess?
    Oooh Gotchew on that one. Gotchew on that one. You have no answer for that.
    "Hard to believe all the cool stuff you still can't do with Quark, too."
    I don't like one app over another I use both daily but indd seems more stable. If you want to argue Toyota vs Chevy, go ahead. I think one software company should look at competing products and implement functionally positive features in their own.
    I suppose to carry my analogy further, Adobe may have added nice features like a sunroof, and power windows but has not added power steering like their competitor has had for 20+ years. I really don't use the "Cool Stuff" in the products I manufacture.
    I will waste no more time here and will simply flood the company with this feature request as I have been doing.

  • What is the Equivalent tool of CHDBPASS in NetWeaver 7

    I want to change the password of SYSTEM  and SYS in NetWeaver 7. What is the Equivalent tool of CHDBPASS in NetWeaver 7
    Edited by: Sebastian Sebaraj on Apr 3, 2008 3:34 PM

    Hai,
    For the SAP BASIS >= Release 6.10:
    Use the oradbusr.sql script. This script is attached to the note 50088. The script is valid for Oracle and Unix. Use the following syntax
               sqlplus /NOLOG @oradbusr. sql SCHEMAOWNER UNIX SAP_SID x
    The SCHEMAOWNER is either SAPR3 or has to start with SAP followed by the three digit schema id (example: SAPPRD).
    On Unix x is a dummy parameter and may e. g. be set to  X.
    To change the password for the SAPR3 or SAP<SID> user you have to use the following command:
               brconnect -u system/<syst_pwd> -f chpass -o SAPR3 -p <new_sap_pwd>
    or
               brconnect -u system/<syst_pwd> -f chpass -o sap< sid> -p <new_sap_pwd>
    Thanks and Regards,

  • Master Templates is crashing FCP 7, In Maverick

    I just updated my iMac from Lion to Maveric. I was very disapointed that all the Master Templates HD are crashing FCP 7. Its amazing that Apple did not fix this issue with FCP7 upgrade. To get FCP X is out of the question.
    Is there a solution thanks.

    Have you tried trashing your FCP  Preferences? This is a common first step when you get unexpected performance from Final Cut Studio components.
    You can download Preference Manager from Digital Rebellion (free) and it will do it for you:
    http://www.digitalrebellion.com/prefman/
    Your preferences will be reset to default settings the nest time you launch the applications.
    MtD

  • How to install downloaded free master templates in FCP 7?

    I have downloaded some free "master templates to create lower thirds in FCP 7. I can open them one by one in FCP, but I can't install them into any specific folders of my MacBook OS (so that they can be accessed directly from FCP 7 browser or short cuts). I could not find - Library - Application Support - Final Cut Studio - Motion - Templates. Could any one tell me how to install them?

    What do you mean previewed, do you mean the small preview window in Final Cut’s Master Templates browser or the rendering on the timeline itself?
    If it is the rendering the following link contains a short tutorial on a few things you may do to speed up renders in motion: http://motion-master-templates.com/free-templates/reflective-flooring-template
    It is the second video from the top. Let me know if this helps.
    Have a wonderful day
    Message was edited by: Deyson

  • What would be the equivalent of the PHP isset function

    I am looking for the equivalent of the php isset function in order to determine if some variables were previously set using the jsp:set tag.
    Another thing which I can<t figure out is how to procede to determine if a form has been submitted, and if it has, how to retrieve the button name used to submit.
    Thanks in advance.
    -Dalzhim

    I have found out that I didn't receive the button information because of a weird behavior of Internet Explorer since that problem didn't occur with Mozilla or Firefox. It would seem that when pressing Enter when you have the focus into a field under Internet Explorer sends over the POST Data without the information of the submit button as opposed to when you simply click the button with the mouse.
    I guess I am right saying IE misbehaves in this particular case as I am more enclined to trust Mozilla which doesn't present this problem but if I'm wrong I'd like someone to point out why.

Maybe you are looking for