Has Keynote 6.2 returned all features of 5.3?

I have been holding off on upgrading to Keynote 6 for Mac because I am aware of the reduced feature set compared to v5. Does the latest update to 6.2 add enough features for me to run my 50+ Keynotes created in v5 or should I hold off longer?

Most, if not all, of the builds and transitions are back. The only way to be sure is to download and find out for yourself. Installing Keynote 6 doesn't erase Keynote 5. They're installed side-by-side. Just look in the iWork 09 folder for the older Keynote.

Similar Messages

  • I am unable to get all keynote transition and slide effect feature in ibook keynote widget. Can it be possible to see same presentation in ibook as was in keynote?

    I am unable to get all keynote transition and slide effect features in ibook keynote widget. Can it be possible to see same presentation in ibook as was in keynote?

    This Apple Support Document has details on the subset of Keynote transitions which can be used in iBooks Author.
    Here are the details:
    Transitions and builds
    These transitions and builds work with the Keynote widget:
    Transitions:
    Magic move
    Cube
    Dissolve
    Drop
    Flip
    Motion dissolve
    Move in
    Pivot
    Push
    Reveal
    Scale
    Twirl
    Builds:
    Appear/disappear
    Cube
    Dissolve
    Drop
    Move in/out
    Pivot
    Scale
    Twirl
    Unsupported builds and transitions will be replaced with Dissolve.

  • Need UCM service which has  to return all the files in the Folder

    HI,
    I need a webservice which has to return all the images/text files in the folder. I ll pass folder name has a input parameter..once i got all the files i have to shown those images in the web page.
    Do we have any service with this requirement?? Or
    i have to use 'Seach' service ,Which has return all the files meta info ...with this info do i have to use GetFile service for displaying data??
    Any suggestions??
    Thanks

    Hi Jiri,
    I dont know abt folios..I ll go thru it now..
    When coming to the option a)
    When we are calling Search service it will return resultset which contains meta data(Filename,File Id,URL,etc.....) for list of files in the folder. Now what i do to display image is , using this URL i ll bulid image object using this URL and i ll display it on the webpage(This web page contains Silver light component to display these images.)
    I m assuming problem with this one is every time when i m building image i m hitting the the server to construct the image. Instead im trying to get the all the images in one shot when i pass folder name??
    I doubt myself wether my assumtion is correct or not...
    any suggestions plz..
    Thanks

  • Has anyone been able to use the download all feature in albums and playlists in iTunes Match using iOS 8?

    SInce updating to iOS 8 I can no longer use the download all feature in iTunes Match. Only 25 tracks download and then the downloading stops and I have to click on each individual track to download the rest. Is anyone else having this problem? Can anyone suggest a solution?

    SInce updating to iOS 8 I can no longer use the download all feature in iTunes Match. Only 25 tracks download and then the downloading stops and I have to click on each individual track to download the rest. Is anyone else having this problem? Can anyone suggest a solution?

  • Comments in Keynote 6 is now all about sharing - not Post-it Style notes

    Hi all,
    In previous versions of Keynote, I frequently used the Yellow Post-it style comments sheets to pin over slides to remind myself of something important - an ersatz Presenter Notes which would cover the slide. I often used it when my next slide was a movie which faded in from black to remind myself of the content of the next slide, rather than staring at a vacant slide.
    That seems to have changed in Keynote 6, where the Comment tab now supports comment sharing and is invisible in Presenter mode. What seems worse for me is that in a movie I am trying to use it shows up in my next slide as black, and not even setting a poster view lets me see what the movie is... I now have to use Presenter Notes which I am one of the few who doesn't like or need - I prefer all the real estate to be devoted to my current and next slides or builds.
    I'm trying to find a workaround to cue me in to my next slide's content other than presenter notes, so if anyone has discovered one, please let me know.
    Les

    Thanks for your time providing an answer to my question of essentially missing elements in Keynote 6 which were part of a Keynote 5 workflow.
    Because I stand in front of the audience, not at a podium, during my presentations, holding onto a collection of printouts and referring to them during my presentation is a non-starter. Being able to see the slide or build coming up on a presenter display showing on a vanity monitor (nowadays my iPad) is a much less obtrusive means to stay with my story without referring to notes. I was able to do this in KN5 using the Post-It style yellow comment notes.
    Comments in KN6 are now more like track change notes in Word in Pages. And more to the point, the movie I have chosen to display shows up as blacked out on the "coming up" slide, even though there it starts immediately rather than from a bacl fade in. That's why I need a comment to place over the slide to remind me of the video.
    The "solution" for now is to remain with Keynote 5 (there are APIs broken in KN6 which also prevent me using Viewfinder and Poll Everywhere) and play with KN6 to explore its capabilities. Mission critical work will remain with KN5 until I can find workarounds ot maintain my quality of presentation delivery, and/or Apple returns ommitted features to KN6 in the forthcoming months.
    Les

  • Regular Report Not Returning All Rows

    Greetings,
    On APEX version 4.1.1.00.23 Using latest versions of Chrome and IE. I found some threads that discussed this aspect some, but not to the extent that is helpful to my situation.
    I know it is crazy to have APEX return 40K+ rows on a report, but I have a need to do so. I need to return that many rows from a table so that an APEX page can be opened via Excel and then have an Excel macro run over the report results and import all 40K+ rows into a worksheet. As I said, that's crazy, but the decision isn't mine. :-) We have the macro working and it passes parameters to the APEX page and imports data from the APEX page.
    Also, the report has 14 columns on it, not that many.
    Given the requirement above I have a regular report page that only has the report and 2 page items on it. The page items contain values that are passed via Excel and are then used in the WHERE condition of the report. Using the same WHERE condition, when I run the SQL for the report outside of APEX it returns 46,840 rows. I have the both the Number of Rows and Maximum Row Count settings set to 50000. And, I have the Pagination Scheme set to Row Ranges X to Y of Z (with pagination).
    When I run the page and enter the selection criteria the report only returns 15,500 rows. Yes, that's a lot rows. And, it takes about 5 minutes to populate. But, it doesn't return ALL of the rows. Also, the pagination suggests that all rows were returned because it reads - row(s) 1 to 15500 of 15500. I have changed the pagination and max rows settings a lot to see of it's just a matter of having the correct report setting. I've yet to find a setting that will cause the whole 46840 result set to be returned.
    It may end up that the report selection needs to change in order to return fewer rows. But, regardless of that why isn't APEX returning the complete result set now? And, is there a way to force it to return the complete result set regardless of the size?
    Any suggestions are appreciated.
    Thanks, Tony

    cloaked wrote:
    Thanks for the response. Yup, you're correct. Downloading to a CSV might be better. I've set reports up that way many, many times. I have even developed pages that import from a CSV into APEX using PL/SQL, years before it was an APEX feature. I initially set the report up to allow it to be downloaded, but the user doesn't want it to work that way.
    The worksheet will be used by a lot of people in our accounting department and they want the process to be as simple as possible. Right now Excel opens up the APEX page, logs into the application, passes parameters to it for the month and company, hits the Select button, waits on the report to build, then automatically imports it, and finally closes the page. It is quite slick. Yes, it takes 5 minutes to run, but the user is OK with that given what the automation provides.
    So, in order for the automated import to work properly all 45K rows need to display on one page, without pagination. I currently have pagination on the page simply to determine if APEX is returning all of the rows.A process of this nature might work better using an export: XML or export: CSV report template, which won't go anywhere near pagination. When a page containing a report using these templates is requested APEX sends the report results in XML or CSV format rather than rendering the page. This should be faster, avoid complications with pagination, and be easier to parse in Excel.
    Previous thread along similar lines: +{thread:id=2285213}+

  • VDN Return Destination feature in UCCE ?

    Hi,
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman","serif";}
    We have a requirement. Please find the scenario below and do let me know how feasible this requirement is in Cisco environment ?
    1)     Call routed to Agent desktop.
    2)     When Agent disconnects the call, that call has to be sent to IVR for survey?
    3)     This has to happen only when Agent disconnects the call and not when Customer disconnects the call.
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman","serif";
    mso-fareast-font-family:"Times New Roman";}
    This has to happen without any manual intervention or customization at desktop level.
    Above scenario is very much feasible Avaya environment thorough VDN return Destination.
    About VDN Return Destination
    The VDN Return Destination feature allows an incoming trunk call to be placed back in vector processing after all parties, except the originator, drop. This feature is activated through switch administration of the VDN form. This feature is included in the Avaya Contact Center Deluxe package and the Avaya Contact Center Elite package.
    A field on the VDN form allows the user to enter a VDN extension as a Return Destination. In this section, the VDN which has the Return Destination field administered will be called the VDN with this feature active. The Return Destination VDN (the one specified in the new field) will be referred to as the Return Destination.
    Every incoming trunk call that is processed through a VDN with this feature active will be placed back in vector processing when all parties on the call, except the originator, drop. For this feature, the originator is the incoming party that originated the call at the time the call entered the VDN with this feature active.
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman","serif";
    mso-fareast-font-family:"Times New Roman";}
    Does UCCE have any mechanism where this can be achieved ?
    Thanking you in advance.
    Thanks & Regards
    Venkatesh.V

    David - thanks for the reply, but that is exactly what I don't want to do.   I already have an outside system (been using since 2009) which has an extremely sophisticated post call survey + inbound survey + direct mail (they then dial into the inbound survey)  + email (w/ weblink) + texting + social media + api tool (to integrate into our website).   This allows our customer to respond to one centralized platform regardless of their preferred method of communication.
    With the Avaya's "Return Destination", I can easily route calls to this outside solution by creating a vector.   I will be the first to admit I know little about the Cisco platform, but I don't see anything comparable which allows me the flexibility to transfer the caller after the Agent hangs up.   From what I read in the past, the CVP post call survey option doesn't allow me to transfer call to an outside system like Avaya.

  • Return all the column values using the F4IF_INT_TABLE_VALUE_REQUEST

    Hi,
    How to return all the column values using the F4IF_INT_TABLE_VALUE_REQUEST?
    For example : if the row has 3 columns then after selecting the particular row, the RETURN_TAB internal table should contain all the three column values.
    Regards,
    Raghu

    Hi,
       Try the following...
    DATA : it_fields like help_value occurs 1 with header line.
    data: begin of w_vbap,
            vbeln      like vbap-vbeln,    
            posnr      like vbap-posnr,   
            werks      like vbap-werks,  
          end of w_vbap.
    data: i_vbap   like w_vbap   occurs 0 with header line,
             w_fields type help_value,
          i_dfies type table of dfies,
          i_return_tab type table of ddshretval with header line,
          i_field  type dfies.
      select vbeln posnr werks
          from vbap into table i_vbap up to 5 rows.
    if sy-subrc = 0.
       sort i_vbap by vbeln.
    endif.
      clear it_fields[] , it_fields.
      it_fields-tabname = c_vbap.
      it_fields-fieldname = 'VBELN'.
      it_fields-selectflag = c_on.
      append it_fields.
      it_fields-tabname = c_vbap.
      it_fields-fieldname = 'POSNR'.
      it_fields-selectflag = space.
      append it_fields.
      it_fields-tabname = c_vbap.
      it_fields-fieldname = 'WERKS'.
      it_fields-selectflag = space.
      append it_fields.
      loop at it_fields into w_fields.
        i_field-tabname   = w_fields-tabname.
        i_field-fieldname = w_fields-fieldname.
        i_field-keyflag   = w_fields-selectflag.
        append i_field to i_dfies.
      endloop.
      call function 'F4IF_INT_TABLE_VALUE_REQUEST'
        exporting
          retfield               = 'VBELN'
         window_title           = 'Select'
        tables
          value_tab              = i_vbap
          field_tab                = i_dfies
          return_tab             = i_return_tab
       exceptions
         parameter_error        = 1
         no_values_found        = 2
         others                 = 3
      read table i_return_tab into w_return_tab index 1.
      if sy-subrc = 0.
      endif.
    Regards,
    Srini.

  • Has adobe adopted the compound math feature like quark has in its interface.

    I am currently working with CS3. Has adobe adopted the compound math feature like quark has in its interface.
    For instance If I want to duplicate an item 29/6" vertically but I know that that step should be 1/8" short, in quark I can type 29/6-.125, or 29/6-1/8. Either method will give me 4.708333. Same issue when I just want to draw a box a specific size minus or plus 15/64 or an inch. Adobe forces me to look up the decimal equivalent before I enter it or I will get the message: "INVALID NUMERIC VALUE"
    This applies to all adobe products I use.
    This really slows production down and I hope CS5 allows this now.

    Seriously Bob, Seriously. Quark has had this feature for 20+ years.
    Quick, do the following, draw a box or a line or anything.
    Now move it to here.
    2.0416 in +3/64 -7pt -3in -9.7mm
    I can type this verbatim in qxd and end up with what I want, I CANNOT do this in any adobe product that I currently use.
    There is nothing wrong with my attitude, this is a feature that I use daily in my work and having indd and ill require me to look up decimal equivalents of inch fractions is not productive.
    If my priorities do not match your priorities why does that make mine a total mess?
    Oooh Gotchew on that one. Gotchew on that one. You have no answer for that.
    "Hard to believe all the cool stuff you still can't do with Quark, too."
    I don't like one app over another I use both daily but indd seems more stable. If you want to argue Toyota vs Chevy, go ahead. I think one software company should look at competing products and implement functionally positive features in their own.
    I suppose to carry my analogy further, Adobe may have added nice features like a sunroof, and power windows but has not added power steering like their competitor has had for 20+ years. I really don't use the "Cool Stuff" in the products I manufacture.
    I will waste no more time here and will simply flood the company with this feature request as I have been doing.

  • Tabular: Row filter on USERNAME() still returns all rows if current user is NOT matched in table??

    I have a table (basically the same setup in the various dynamic security in tabular blogs) where the table contains WindowsUserName stored as domain\username.
    I have a Row Filter on the table: SecurityTable has a filter of =SecurityTable[WindowsUserName]=USERNAME()
    When a user connects to the tabular model AND their name is matched in one of the rows they return JUST the rows with their match.  Which makes sense.
    However, if a user connects and their Windows user name is NOT in a row in that table....they return ALL rows???
    That makes no sense to me.
    It behaves almost as if it is doing a check and if it DOESN'T find a match it just returns all values.
    What am I missing?
    --------------EDIT-----------
    Found the issue: that use was (unknown to me) a domain admin, so... admin rights trump all :)

    Resolved:
    User had admin rights, didn't realize this at the time.

  • SQL Server Installation - All Features

    Hi,
     I'm literally fighting with one of my colleague. He is installing all features that are available during the installation and also configuring with defaults. For example, Reporting Services with Default configuration & SSRS with Sharepoint
    integration, Distributed Replay, Analysis Services, Integrating Services, Replication etc etc.... He is litereally selecting every checkbox that is available on the features selection screen and installing them with defaults. I'm fed up with the
    argument and finally approaching you.
     There is no such requirement from the client. Application owner wants us to install only SQL Server and host their databases, that's it.
     How can I convince him that installing all features is not a good idea? Can I really convince him?
    If you feel that I have answered your question then please "Mark as Answer".

    Hello,
    Installing more features may require more resources from the server. Features like Analysis Services and Reporting Services require
    many computer resources like RAM and disk space.
    Just one example: SQL Server has a minimum requirement of 1 GB of RAM (apart from the RAM requirements of the operating system). If
    you decide to add the Data Quality Services feature only, then the minimum requirement for installation is now 2 GB.
    Additionally, by installing less features you are reducing the surface area and improving security. The less features the computer have
    installed then less roads to potential attacks.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • No "All Features" tab in "New Gallery"?

    Following the instructions in the Setting up the ADF Mobile Environment chapter 3, section 3.3 ("Setting Up JDeveloper"), step 8 references an All Features tab. There is no such tab. It appears I may need this tab to see the Client Tier. All I see is an Available Items tab with no Client Tier selection under Categories.
    I just installed a fresh copy of JDeveloper Studio Edition Version 11.1.2.4.0 and added the ADF Mobile extension as indicated in the instructions.
    I am not sure how to proceed given the missing tab.

    Thank you. It shouldn't be required as elevated privileges generally aren't needed to modify stuff under arbitrary directories off the C drive root. But I'll try it anyway.
    When running as administrator and checking for updates, ADF Mobile no longer shows up. Is it because I already installed it?
    OK, let's uninstall. JDeveloper 11g appears to have no extension uninstall feature, so I closed it and deleted the contents of C:\Oracle\Middleware\jdeveloper\jdev\extensions\oracle.adf.mobile.
    Re-opened JDeveloper as an administrator, Help > Check for Updates, Next, Next (Official Oracle Extensions and Updates was already checked), ugh, still don't see ADF Mobile.
    OK, uninstall JDeveloper. Delete c:\oracle as it still had 227 MB and 1351 files. Reinstall JDeveloper 11g from jdevstudio11124install.exe, accepting all defaults.
    Run JDeveloper again as administrator (right-click, Run as administrator). On Select Role screen, accepted default of Studio Developer (All Features). Help, Check for Updates, Next, Next (Official Oracle Extensions and Updates already selected), checked ADF Mobile 11.1.2.4.39.64.44, Next, I Agree, Next. It downloads ADF Mobile. Finish.
    Hit No on Confirm Exit dialog. Close JDeveloper. Start it again as administrator. On Select Role screen, accepted default of Studio Developer (All Features). File, New. Again, New Gallery page has no tab besides Available Items, and there is no Client Tier entry under Categories.

  • An unknown error has occurred (EC ) To return to the home page please click here

    Ich versuche seit Wochen, in Appworl meine App mit meinem Torch zu syncronisieren!
    Aber bekomme immer folgende Meldung:
    An unknown error has occurred (EC )
    To return to the home page please click here
    Welchen Browser brauche ich?
    Oder was muß ich tun um meine Apps wieder mit Firefox oder Chrome syncronisieren zu können?

    I have seen in another thread this same error with no resolution.  All I've seen are people trying to fix a problem on the PB when it is a desktop problem not the PB!  I have had the same error from more than one desktop PC with nothing in common. What does it take to get an answer? This ec error is happening to more and more people with no help.
    Information Technology is fun! Play with IT.

  • Is there a "play all" feature for videos on iphone4????

    Is there a "play all" feature for videos on iphone4????

    Hi Robin
    Welcome to apple discussions. I use Toast (personal choice only) in this situation since it has a play all check box. But then you don't get the fancy menus.
    Click Here
    There is no such check box within iDvd for selecting play all but you can set up iDvd's preferences to address scene selection menus when a movie/s is added. And here's how you do that:
    A second option might involve adding the 8 separate movies to the slideshow feature within iDvd for continuous play. And yes you can add photos as well as movies to idvd's slideshow feature with a number of added benefits which I won't go into here. But if you want more info on this procedure just look at a few of Old Toad's prior posts / replies on this iDvd forum.
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
    Message was edited by: SDMacuser

  • Contains return all the records when the query string matches the columns

    I used the multi_column_datastore preference and created an index on three columns (item_name, description,owner_part_number). Now if I do a search:
    select * from items where contains(description, 'description') > 0;It returns all the rows in items table, but not all the rows have "description" as a word. I guess Oracle text assumes the query intends to get all the rows as the query string matches one of the column names. My question is whether Oracle Text has any preference settings to alter this behavior?
    execute ctx_ddl.create_preference('item_multi_preference', 'MULTI_COLUMN_DATASTORE');
    execute ctx_ddl.set_attribute('item_multi_preference', 'columns', 'item_name, description,owner_part_number');
    create index item_text_index on items(description) indextype is ctxsys.context filter by owner parameters('LEXER ENG_LEXER WORDLIST ENG_WORDLIST STOPLIST CTXSYS.EMPTY_STOPLIST datastore item_multi_preference MEMORY 1024M');Thanks.
    Jun Gao

    It looks like a basic_section_group fixes the problem as well, as demonstrated below and I believe a basic_section_group may be more efficient than auto_section_group.
    SCOTT@orcl_11gR2> -- recreation of problem:
    SCOTT@orcl_11gR2> drop table items
      2  /
    Table dropped.
    SCOTT@orcl_11gR2> create table items (
      2       "ITEM_NAME"             varchar2(100 byte),
      3        "ITEM_NUMBER"              varchar2(100 byte),
      4        "DESCRIPTION"              varchar2(4000 byte),
      5        "OWNER" number
      6  )
      7  /
    Table created.
    SCOTT@orcl_11gR2> begin
      2    FOR Lcntr IN 1..100
      3    loop
      4         insert into items (item_name, item_number, description, owner)
      5         values (dbms_random.string('A', 10),
      6              dbms_random.string('A', 10),
      7              dbms_random.string('L', 8) || ' '
      8              || dbms_random.string('A', 4)
      9              || dbms_random.string('A', 5)  || ' '
    10              || dbms_random.string('A', 10),
    11              dbms_random.value(1,10) );
    12    end loop;
    13  end;
    14  /
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> begin
      2    FOR Lcntr IN 1..100
      3    loop
      4         insert into items (item_name, item_number, description, owner)
      5         values (dbms_random.string('A', 10),
      6              dbms_random.string('A', 10),
      7              dbms_random.string('L', 8) || ' '
      8              || dbms_random.string('A', 4) || '111'
      9              || dbms_random.string('A', 5)  || ' '
    10              || dbms_random.string('A', 10), 1234 );
    11    end loop;
    12  end;
    13  /
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> exec ctx_ddl.drop_preference('ENG_WORDLIST');
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> begin
      2    ctx_ddl.create_preference('ENG_WORDLIST', 'BASIC_WORDLIST');
      3    ctx_ddl.set_attribute('ENG_WORDLIST','PREFIX_INDEX','TRUE');
      4    ctx_ddl.set_attribute('ENG_WORDLIST','PREFIX_MIN_LENGTH',1);
      5    ctx_ddl.set_attribute('ENG_WORDLIST','PREFIX_MAX_LENGTH',10);
      6    ctx_ddl.set_attribute('ENG_WORDLIST','SUBSTRING_INDEX','TRUE');
      7    ctx_ddl.set_attribute('ENG_WORDLIST','WILDCARD_MAXTERMS', 0);
      8  end;
      9  /
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> execute ctx_ddl.drop_preference('ENG_LEXER');
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> begin
      2    CTX_DDL.CREATE_PREFERENCE ('ENG_LEXER', 'BASIC_LEXER');
      3    CTX_DDL.SET_ATTRIBUTE ('ENG_LEXER', 'PRINTJOINS', '@-_');
      4  end;
      5  /
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> execute ctx_ddl.drop_preference('items_multi_preference');
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> begin
      2    ctx_ddl.create_preference('items_multi_preference', 'MULTI_COLUMN_DATASTORE');
      3    ctx_ddl.set_attribute('items_multi_preference', 'columns', 'item_name, description,item_number');
      4  end;
      5  /
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> create index items_text_index
      2  on items(description)
      3  indextype is ctxsys.context
      4  parameters
      5    ('LEXER         ENG_LEXER
      6        WORDLIST   ENG_WORDLIST
      7        STOPLIST   CTXSYS.EMPTY_STOPLIST
      8        datastore  items_multi_preference
      9        MEMORY     1024M')
    10  /
    Index created.
    SCOTT@orcl_11gR2> create index owner_idx on items (owner)
      2  /
    Index created.
    SCOTT@orcl_11gR2> exec dbms_stats.gather_table_stats (user, 'ITEMS')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> select count(*)
      2  from   items
      3  where  contains (description, 'description') > 0
      4  /
      COUNT(*)
           200
    1 row selected.
    SCOTT@orcl_11gR2> -- correction of problem:
    SCOTT@orcl_11gR2> exec ctx_ddl.drop_section_group ('items_sec')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> begin
      2    ctx_ddl.create_section_group ('items_sec', 'basic_section_group');
      3    ctx_ddl.add_field_section ('items_sec', 'item_name', 'item_name', true);
      4    ctx_ddl.add_field_section ('items_sec', 'description', 'description', true);
      5  end;
      6  /
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> drop index items_text_index
      2  /
    Index dropped.
    SCOTT@orcl_11gR2> create index items_text_index
      2  on items(description)
      3  indextype is ctxsys.context
      4  parameters
      5    ('LEXER         ENG_LEXER
      6        WORDLIST   ENG_WORDLIST
      7        STOPLIST   CTXSYS.EMPTY_STOPLIST
      8        datastore  items_multi_preference
      9        MEMORY     1024M
    10        section group items_sec')
    11  /
    Index created.
    SCOTT@orcl_11gR2> select count(*)
      2  from   items
      3  where  contains (description, 'description') > 0
      4  /
      COUNT(*)
             0
    1 row selected.

Maybe you are looking for