Hash problem while split the fileds after reading the file(In V4.6C)

<<Frequently Asked Question>>
Hi Experts,
I have uploaded the file with tab delimiter in application server,tab is replaced with hash(#) in the application server.How we split the fields after reading the record.i am working on 4.6c version.
Edited by: Matt on Dec 6, 2009 1:39 PM

Dear thr,
Could you please share your experience that how it got resolved as i am using standard transaction ve94 and tab delimited file is converted into Hash delimited file and # is also uploded with the data that is unwanted for it.
Thanks
KuldeepJain

Similar Messages

While loop never stops after reading the result

I 'amattaching the program with thismessage in which while loop never stops, going on continuing until I stops it manualy using the off button What i have to do to get it off automatically afetr execution and reading the query and getting the result in Read in Front panel
Attachments:
PMd VI.vi ‏33 KB

Your stop condition is "continue if true". This means that, unless you press the button, the while loop will stop after one iteration.
First, you should change the termination condition to "stop if true".
Then you should make the stop button "latch when released" (right-click..mechanical action). Else you don't have a well defined state after the program stops.
You should decide on a reasonable loop rate and enter it for the wait control. (beter use a diagram constant if the value is always the same).
Why do you need to continue reading in a loop? Are you expecting the response to change over time?
Do you want to keep appending to the string indicator or only show the latest characters received?
Maybe you also need a wait between the writing and reading?
Delete the ms timer value indicator, it is completely useless.
Do you get any error codes?
Don't use the run continous button. Use the plain run button.
What device are you communicating with? Do you have documentation?
LabVIEW Champion . Do more with less code and in less time .

Problem while selecting a table after creating the dblink

Hi,
We have created the dblink for oracle to sql server and it created successfully,
But while selecting the table from oracle we are getting the below issue,
select * from "sysdiagrams"@omniyat;
ERROR at line 1:
ORA-00942: table or view does not exist
[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name
'sysdiagrams'. {42S02,NativeErr = 208}[Microsoft][ODBC SQL Server Driver][SQL
Server]Statement(s) could not be prepared. {42000,NativeErr = 8180}
ORA-02063: preceding 2 lines from OMNIYAT
Kindly provide us the solution to resolve this issue.
Regards
Sham

Please see:
Odbc Connection From Oracle To SQL*Server Fails With Errors Ora-28546 and Ora-2063 When Using Connection via Database Link. (Doc ID 1389492.1)
To BottomTo Bottom
Error 08001,NativeErr = 11 Instance Invalid or Not Running Connecting to SQL*Server Using Dg4MSQL (Doc ID 1349023.1)
How to Resolve Common Errors Encountered while using Database Gateways (DG4IFMX, Dg4MSQL, DG4SYBS), DG4ODBC or Generic Connectivity (Doc ID 234517.1)
Thanks,
Hussein

Problem in deleting the message after reading

Hi
I m having some problem to delete the message after reading.
i read the FAQ, and there is only one question regarding to delete that i have tried but its not working
As my application required that message should be deleted after the processing.
Please help me out asap
Thank in advance.

now here is the protocol trace from starting to the end point
with the settings of
session.setDebug(true);
and
folder.close(true);
POP3: connecting to host "172.xx.xx.xx", port 110
S: +OK Microsoft Exchange Server 2003 POP3 server version 6.5.6944.0 (xxxxx.xyz.com) ready.
C: USER test1
S: +OK
C: PASS Password
S: +OK User successfully logged on.
C: STAT
S: +OK 1 548
Total messages = 1
New messages = 0
================================
C: TOP 1 0
S: +OK
Received: from yyyyyy ([172.xx.xx.xx]) by xxxxx.xyz.com with Microsoft SMTPSVC(6.0.3790.3959);
     Thu, 11 Sep 2008 12:21:14 +0530
Message-ID: <3373112.1221115884647.JavaMail.284528@yyyyyy>
From: [email protected]
To: [email protected]
Subject: testing
Mime-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Return-Path: [email protected]
X-OriginalArrivalTime: 11 Sep 2008 06:51:14.0500 (UTC) FILETIME=[C8892840:01C913DA]
Date: 11 Sep 2008 12:21:14 +0530
C: LIST 1
S: +OK 1 548
------------STARTING LINE------------
MESSAGE #1:
From: [email protected]
To: [email protected]
Subject: testing
SendDate: Thu Sep 11 12:21:14 IST 2008
CONTENT-TYPE: text/plain
This is plain text
------------TEXT------------
C: RETR 1
S: +OK
Received: from yyyyyy ([172.xx.xx.xx]) by xxxxx.xyz.com with Microsoft SMTPSVC(6.0.3790.3959);
     Thu, 11 Sep 2008 12:21:14 +0530
Message-ID: <3373112.1221115884647.JavaMail.284528@yyyyyy>
From: [email protected]
To: [email protected]
Subject: testing
Mime-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Return-Path: [email protected]
X-OriginalArrivalTime: 11 Sep 2008 06:51:14.0500 (UTC) FILETIME=[C8892840:01C913DA]
Date: 11 Sep 2008 12:21:14 +0530
------------TEXT------------
******************MESSAGE ENDING LINE*****************
C: QUIT
S: +OK Microsoft Exchange Server 2003 POP3 server version 6.5.6944.0 signing off.

In the address bar where type the address of the web site at the top. after entering the address i press enter key from the keyboard but it does'nt work there . Means the page is not navigating towards the address. Kindly solve the problem

In the address bar where type the address of the web site at the top. after entering the address i press enter key from the keyboard but it doesn't work there . Means the page is not navigating towards the address. Kindly solve the problem

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

Just go back in photoshop and use the Slice Select tool, then just click and select the slice and hit delete - if you're not sure which one is the active slice just right click and find the one that has the Delete Slice option.
It's possible you either added the slices by accident or if you received it from someone they just had the slices hidden. For the future, you can go to View > Show > Slices to display (or hide) slices.

TS1398 I have problems with my wifi connection after update the ios6 any advice

I have problems with my wifi connection after update the ios6 any advice

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have problems with my wifi connection after update the ios6 any advice

I have problems with my wifi connection after update the ios6 any advice

Ask your question in an iPAD forum.
This is the OS X Mountain Lion forum.

My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.

My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.

I just did a reset all settings on both.
Will see where this gets me.
Thank you for your helpfull input.

HT203433 After reading the sample for Hard Measures and buying and downloading, the downloaded book was missing 9 chapters. Anyone know how to fix this?

After reading the sample for Hard Measures and buying and downloading, the downloaded book was missing 9 chapters. Anyone know how to fix this?

Hi Charles...
Try re downloading the iBook > Downloading past purchases from the App Store, iBookstore, and iTunes Store

Why do external forms that I open (usually attached in an email) have all type of color problems. I usually cannot even read the document

Why do external forms that I open (usually attached in an email) have all type of color problems. I usually cannot even read the document

Hi,
What is the exact name of the desktop app you have? Is it "Acrobat Reader DC", "Acrobat Pro DC" or "Acrobat Standard DC"?
(Previously, your question was posted to the wrong forum - the Reader/Acrobat DC mobile forum.)
If you have the paid product ("Acrobat Pro DC" or "Acrobat Standard DC"), you can contact Adobe Customer Care.
Contact Customer Care
If you have the free product ("Acrobat Reader DC"), Adobe Customer Care will redirect you to the user forum like this one. You just need to wait for someone (who is an experienced user but not necessarily an Adobe employee) to answer your question in the right user forum.
You may also try looking for answers for the same or similar problems by Google search.

I use LabVIEW 7.1 but I have some problem when, I use LabVEW to read the data from serial communication

I use LabVIEW 7.1 but I have some problem when, I use LabVEW to read the data from serial communication.
I use LabVIEW to read the data from serial communication then, i open the example (.vi) from Serial Communication - Advanced Serial Write and Read from LabVIEW Example. BUT it have some error message that : Error - 1073807202 occured at property node in visa configure serial port (instr).vi -> advance serial write and read .vi
this error code is undefined. no one has provide a description for this code, or you might have wired a number that is not an error code to the error code input.
I don't know why? please help me. thank you.

When I copy that code into "Explain Error" I get: "VISA: (Hex 0xBFFF009E) A code library required by VISA could not be located or loaded."
You may have a bad install of VISA or the wrong version of VISA loaded. Try re-installing VISA. You can get the latest version from the NI support site: http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument&node=1....
Also ensure that you are not pointing the example towards a serial port that does not exist.
Please let us know what you find and what gets this working for you.
Rob

Plz hlep my : iso 7 4s /There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is

There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is
Imei: 013055008069758
SerialNumber:DN*******TC0
mlbserialNumber: DQ************42D
plz hlep me
<Personal Information Edited by Host>

There is a problem in my iPhone device after updating the new version needed to Active iPhone 4s
and
I upgraded to 7.0.3 yesterday and now my battery only lasts about 4 hours with very little active use.
iOS 7.0.3

There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is

There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is
Imei: 013055008069758
SerialNumber:DN*******TC0
mlbserialNumber: DQ************42D
plz plz plz hlep me
<Edited by Host>

There is a problem in my iPhone device after updating the new version needed to Active iPhone 4s
and
I upgraded to 7.0.3 yesterday and now my battery only lasts about 4 hours with very little active use.
iOS 7.0.3

HT203167 I purchased the full book from the iTunes Store after reading the sample but the full length will not download only the sample how do I fix this?

I purchased a full length book after reading the sample but only the sample will download how do I fix this as the full length book appears under purchased books?

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
From Here
http://support.apple.com/kb/TS3281
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Hash problem while split the fileds after reading the file(In V4.6C)

Similar Messages

Maybe you are looking for