Have had no success in fixing ui.dll error in Lightroom 5.6 using Win 7 Ultimate?
Have been using every version of PS thru CS6, now with CC. When right clicking a photo to open, I get ui.dll error saying to fix re-install. Checking ui.dll in LR 5.6 it says it is 3.53 MB. Have gone through try ing to fix it with 5.5 ui.dll, one I get when trying to find one to change in X64 folder, re-naming one found in original folder to ui.dll it doesn't work. HOW do I get it to work as it did in ALL versions before?
I don't have the error details, but eversince I installed WSPP, I have been having crash problems.
Mailny when publishing to my site.I notice the RAM usage is upto about 2.5 Gb (have 12gb on board)
Where was this thread ? I tried replacing the ui.dll as suggested in another discussion, crashes the same however the crash info is different:
Cheers
Scott
Similar Messages
-
cannot get epson stylus office tx610fw printer to print now that Ive updated to osx mountain lion, have had no success getting my mac laptop to update latest apple update for epson printer
John Blanchard1
Re: can't print to Epson TX610FW
Jul 28, 2012 10:23 AM (in response to normdrexel)
Try installing the Epson drivers from here:
http://support.apple.com/kb/DL1398
and then seeing if adding and printing with USB works.
This site really works and my computer is now printing. -
I've just changed my router and whilst my laptops sync ok, my G4 tower which connects via an airport express doesn't connect to the internet. I think it's something to do with the IP or DHCP settings but have had no success, any help much appreciated.
Hi Jake,
Is it connecting to the Router or Modem?
Is the new Router using maybe WPA2 encryption? If so, G4s can only do WPA or less.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
Then... Try putting these numbers in Network>Airport>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6 -
I got this problem when I tried to configure out-going email and add an account to farm administrator group.
I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
Here are the screen shots.
The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
Anyone can help me about it? Thanks.
Here is the log.
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
8gsf
High
#160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation General
8kh7 High
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
7946 Critical
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation Runtime
tkau Unexpected
Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message) at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
df98555c-612f-4a58-9443-ab6e9a4fcc53
The e-mail address I have tested it for several times and there is no problem.
Anyone has any clue about this error?Hi.
This I have seen before...
It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
If, its the builtin SMTP service you are using, check this link:
http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
Check that and try again.
Regards
Thomas Balkeståhl - Technical Specialist - SharePoint -
http://blog.blksthl.com
Download the SharePoint Branding Project here
Download the SharePoint 2010 Site Settings Explained here -
Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive. I was told it was just worn out. So I ordered another Octane from ebay, and it wouldn't connect to the internet. I was told by Verizon that the software had been changed. So I ordered a NEW in Box Octane and I am having trouble with that too. Bing won't work, nothing will work that will enable me to download Verizon Opera mini that still works on my old phone. I have a smart phone with another number but I LOVE the Octane for daily use. Why will my old Octane work but I can't get a NEW one to. Verizon guys are stumped too:( Please help!! Thanks!
Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread. -
just reinstalled itunes due to need to fix msvcr80.dll error;
now itunes wont run because itunes library.itl cant be read created by newer version itunes.
how do i resolve this ?By way of experiment, let's first try specifically choosing a library for iTunes to open.
Quit iTunes if that error message is showing. Now hold down your Shift key, and then open iTunes. (Keep holding down the shift key while iTunes is opening.)
You should see a dialog asking you if you want to choose or create a library, as per the following screenshot:
Click "Choose Library ..."
You should now see a screen like the following screenshot:
Select the "iTunes Library.itl" file (shown circled in the screenshot) and click "Open".
Does your iTunes library open without the error? -
I Have had my iPad for 6 months as I cannot access my work emails using windows. I have to say that it is the most unhelpful device I have ever used and although it looks like there isn't an answer for some of the questions I have asked below, I thought I would try!
1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
IT might just be that I don't have the correct settings (I am a technophobe) but I absolutely hate the iPad and only have it for work emails, it is so annoying that I can get my mobile phone and kindle3g to work fine, but always have problems with the iPad. I am sure it could be good (and for reading emails on the go in the uk it is great, as I like the key board) but it just seems to make everything else difficult.
i Hope you can help and sorry for asking questions others have, but I am just hoping that something new might have been developed!
thanks,
K
Message was edited by: K Paton1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
Try rebooting your iPad, that should fix he issue. I that doesn't work, delete the app and re-download it. The Kindle books should all be in he Kindle cloud services and you can get them again. I have an iPad2 w/ Kindle app and it works just fine - no issues.
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
Page as in a kindle book way? turn iPad to landscape position from portrait position. If, however, you mean open more than one application at a time, then no. And not hopeless, as it takes a bit of time to get used to, going from a desktop/laptop format to tablet format.
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
It's actually fairly easy. Press down on the word, then you can expand by drawing your finger to cover word/sentence/paragraph/page, hit select or select all then it gives you the option to cut, copy, paste, define. If you want to use a word processing app on the iPad, Pages is a good application.
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
It's the connection on your phone. Samsung Galaxy SII? Android software? What you have to do is go to the phone's settings and connect via wireless, not Bluetooth. Go to System Settings (on phone) and under Wireless and Networks click 'more' and go to the Tethering and Portable Hotspot option. Set up your mobile wifi hotspot, name it though it will probably come up with 'AndroidAP', choose a WPA2 security level and put in a password. Go back to previous screen and turn on 'Portable Wi-Fi Hotspot' box. Then on your iPad in the Settings - Wi-Fi section, it should then recognize your phone for tethering. If it's a Windows Phone 7, I don't know the layout of that software, but presumeably similar.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
Sometimes the issue is with the website design, not all websites are optimized for mobile devices - not just iPad but also Android devices. It happens. They're getting there, but occasionally the page might need a refresh.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
It depends on what you use to build the websites on the computer. Recommend a free program on the computer called CoffeeCup Free HTML Editor. I don't recommend using IE period; Firefox or Chrome are my choices on Windows machines. I have two websites that I manage, both using this program. I'm assuming that when you mean you can't access the sites on the iPad you mean to update them? Ostensible there are apps to let you do this. What format are the sites? Without seeing what exactly you mean and what you want to do, it's hard to explain.
As for seeing full page while emailing within a site, turn iPad to portrait mode, and try to finger-pinch touch the screen to see if that will bring the fuller page into view. Other option is opening a second tab with same website and just go between tabs to reference material.
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
If you were outside the US or Canada, my guess is the problem lies within the SIM card in your iPad. If you were outside North America, there are different band levels - I'm guessing you have a SIM thats locked to a particular provider. Band level frequencies differ per country/continent, so a SIM card that will work in Canada/US will not likely work in UK/Europe/Asia/Australia, etc. you will be able to get your emails again when back on a wifi network. Mobile phone may have a different type SIM card (GSM/HSPA) from your iPad SIM. Also, check your email settings.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
Moving the cursor on a sentence is a matter of putting your finger on the screen where you want it. It's exceptionally easy to do. I'm using the Notes app to write this whole segment and I just need to put my finger where I want to change things and presto it's ready for me to change where I want it.
Here's a solution: sell your iPad (after you wipe your data off it) to someone who will appreciate it, and put your money towards the Windows Surface Tablet out later this year/early next year, where you can (reportedly) connect a mouse to it. It will have some of the Windows 7/8 functionality that you're more familiar with, or get a netbook.
- Ceridwyn2 -
How do you fix msvcirt.dll error in Premiere Elements 8
The software will not load, no matter what I do, I have tried all kinds of fixes. Reinstalled and uninstalled. I am desparate.
electricbean55
My drill questions for Premiere Elements 8 users
1. Are you running the program as the 8.0.1 Update?
2. Do you have the automatic Background Rendering and AutoAnalyzer features turned OFF?
3. Do you have the latest version of QuickTime installed?
4. Are you running the program from a User Account with Administrative Privileges?
Assuming Yes to all of the above....
Is this a "worked before but now" or "it never worked" issue?
What computer operating system (including 32 or 64 bit system) are you running Premiere Elements 8.0/8.0.1 on?
Is you video card drive up to date? Assuming that at one time you got into Edit Menu/Preferences/General, how did you set Enable GPU Playback, On or Off?
What happens if you bypass the Welcome Screen for the opening? Same message?
(To do that, you would right click the desktop icon for the program, select Properties, select Open File Location. That should take you to Adobe Premiere Elements 8.0.exe. Right next to that file is another named Adobe Premiere Elements.exe. Make a desktop shortcut for the latter file and use that desktop shortcut to open Premiere Elements thereafter.)
Please confirm that clicking OK to the message never lets you continue into the program.
Please review.
We will be watching for your follow up.
Thanks.
ATR -
How to fix "server problem" error message when trying to use PhoneGap build service.
I have a site that is now optimized for mobile devices and want to use the PhoneGap Build service in Dreamweaver CS6 to make a native app. Unfortunately, I keep getting the "We seem to be having server problems." error message when I try to create a new project. I did notice that the configuration file was created at the site root. I've seen a few other similar threads on this, but no solution. I've checked on any firewall issues (none) and know that the PhoneGap server is not down. The problem is on my end.
Thanks,
LorenNot an answer to the server problem, but I have posted the PhoneGap Build process here: http://forums.adobe.com/message/4669054#4669054. It might help anyone still having problems.
-
I have an ageing (2006) iMac running OS 10.6.8 with an external LG CD/DVD writer (I've worn out the internal one). I am not sure whether this is an iTunes issue or a LG issue.
Incident 1: importing a CD with 71 short tracks via iTunes. Track 24 is listed as 25 seconds long, but (on the first attempt) only the first 10 seconds actually import. I spotted it immediately as it also blacked out the artwork and refused to let me paste the artwork back in. A second attempt at the import worked correctly. ** SOLVED AT 2ND ATTEMPT **
Incident 2: importing a CD with 20 tracks averaging a little over 3 minutes each. Gracenote did not recognise the disc. The first 18 tracks showed reasonable track lengths, but track 19 showed 14 hours 43 minutes 21 seconds [!] and track 20 showed over 1 hour [possibly track 20 was showing the length of the entire CD]. The remaining 2 tracks were successfully imported into my other iTunes on a Windows XP machine (where Gracenote *did* recognise the CD) and transferred to the Mac over my internal network. The next 2 CDs also had exactly 20 tracks each, and also had track 19 showing 14 hours 43 minutes and a few seconds (not quite the same as the original track 19, but close...) and track 20 showing over 1 hour [again possibly the length of the entire CD].
I tried "Get album artwork" on one of the early tracks of one of the CDs, and it came back with an error "Invalid TOC" - this looks to me like the table of contents is getting corrupted (hence the bizarre track lengths reported, and hence Gracenote not recognising the resulting bizarre profile) when there are exactly 20 tracks on the CD.
But a CD with 21 tracks looks OK, and so does a CD with 8 tracks.
I'm putting this one down as ** SOLVED BY USING ITUNES ON WIN-XP AND TRANSFERRING FILES BETWEEN MACHINES ** but I would like to know what is going on!
Has anyone else had a similar problem?At the lower bitrates that were popular several years ago, like 128, AAC provides better audio quality than MP3. At some point ( the dbPoweramp experts believe it is 160 ) the advantage disappears, and above that AAC and MP3 are sonically equivalent. However, MP3 still enjoys a huge advantage in acceptance and compatibility across multiple players, programs, and phones.
In any case, it hardly appears to be worth the trouble to re-rip your CDs. But don't discard them either! -
What do i need to do to get it working again? it just shows a blue screen
Thanks.
Try this:
Make sure you folders are marked as not hidden. Click your start menu, type in "show hidden files and folders". Click on it. A new window will appear that should be titled "Folder Options". Click on View. Scroll down until you see Files and Folders. Make sure to check "Show hidden files, folders, and drives". Click Apply and then OK.
Next, open your browser and go to your foxtab page (Ctrl + Q). Right click on the background. You should see a menu with "Global Settings". Click on it. A new window should appear that says "Flash Player Settings Manager". Click on Advanced tab. Scroll down to "Trusted Location Settings". Click on it. In the window, click on "Add". Next window (Add Site), click on "Add Folder".
If you showed your folders and files, the path should be easy to follow:
Add Folder - Computer - C: - Users - YOUR COMPUTER NAME (username) - AppData - Roaming - Mozilla - Firefox - Profiles
You do not have to open Profiles all the way. Just click on the folder. Click OK. You should now see it in you Trusted Location Settings.
You may need to close the browser window and reopen it to make the changes take effect.
Hope this helps.
Let me know if it doesn't. -
Is there no direct help from Adobe? This is not good.
Three Score plus wrote:
Is there no direct help from Adobe?
You can always Contact Customer Care via chat or phone (phone support is available Mon-Fri during US daytime). -
I cannot view pictures or load them with my Canon, I have no iphoto to do so, how do I recover it, is it just one of the repurchase deals with Apple and if everything goes to **** again, I just buy it another time, so on and on? I rather drive nails into my macbook pro, I got this thinking I was avoiding windows nightmares, but I guess eventually they show up everywhere?
I doubt you can own a macbook pro without iphoto, but one of you apple geeks will prove me wrong!Looke for the install disk like #4 in this screenshot:
OT -
What can I do to fix Adobe? I cannot open any PDFs, always getting an "error" message.
Adobe is a company with many products, which specific one are you talking
about? And what version of it? And what's your OS? And what exactly is
the error message you're getting?
On Thu, Jan 1, 2015 at 8:38 PM, Aquinnahgirl <[email protected]> -
IPad retina crashing all the time and only 4 month old.Reset by apple at genius bar but still have the same trouble 10 mins after setting it back up with 1 app fb and my emails.Contacted apple who were quick to respond but cannot duplicate the problems.I only wish they were sitting beside me as complete novice with computers.Spent 500 pounds on this and now using hubbys nexus wish I got one.Is anyone else having problems if so any help would be appreciated
I Also have this problem!!
In my situation, the screen simply started exhibiting the same symptoms a few weeks ago (early February) for no apparent reason. At first I thought the screen was dead, but discovered the heat solution by accident. Now I turn it on and keep it from going to sleep until I go to bed. Thank goodness the battery is still awesome on this thing.
I bought it new and still has the original screen, I keep it at home (never below 62 degrees). Coincidentally, this happened a day or two after the expiration of the warranty!! Any help figuring this one out would be eternally appreciated.
iPad mini retina Wi-Fi, iOS 8.1.3
Maybe you are looking for
-
Cannot find "Create A Role " in BI Publisher
Hi All, I am trying to configure EBS security and assign catalog permissions to the EBS Roles.Following the Oracle Document Integrating with Other Oracle Security Models - 11g Release 1 (11.1.1) and it says under Security Center-->Role & Permissions
-
What would cause a prolonged blue screen during start up?
I have an iMac desktop. Recently I've had trouble with a prolonged blue screen during start up (approx. 10 mins) before it finally takes me to the login screen. Any ideas why this is happening? Jeff P.
-
Hi all , I just starting learning J2EE ..and i having this problem when compiling a code when try to import javax.servlet.http.*; Compliler gave me this error Package javax.servlet not found in import. I have install JDK standard edition version jdk1
-
Can anyone give me an example how to create a Servlet context including the doc_root on an NT4 (service pack 5) running Oracle 9i. We are trying to set up the OSE at the moment. Thanks in advance.
-
Can i set applets as my wallpaper?
read the above ^^^.